In and out set

Is it possible to set an in and out point on a clip before you drop it into a comp, or is this only possible after it has been placed into a comp?

Is it possible to set an in and out point on a clip before you drop it into a comp,
Todd beat me...
Mylenium

Similar Messages

  • Is there any way to lock your in and out points on a clip?

    Everytime I click outside the clip, my in and out points disappear and I have to reset them.  Any ideas?

    No way of locking them in, but once you have your in and outs set, if you hit F it will favorite that area. Then whenever you want to go back to that clip just click the favorite icon on the clip and your in and outs will be set around the favorite section.

  • How can i reset my app store setting? i have signed in and out with my own apple id but i used a different one at first and that one is not going away

    How can i reset my app store setting?
    I have signed in and out with my own apple id but i used a different one at first a few years ago and that one is not going away how do i change it to my own apple id?

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. Your only option is to delete the content and buy it again with the new Apple ID.

  • In version 4.0 I can't use the pinch feature on my trackpad to zoom in and out. Is there a setting in Firefox for this?

    I installed v4.0 of Firefox and can no longer use the pinch feature on the trackpad of my MacBook. It seems to work OK in Safart and I'm wondering if there is a setting in Firefox to enable me to use that feature. The way the feature works is that you pinch your thumb & forefinger together or spread them apart to zoom in and out.

    Some gestures have been removed in Firefox 4.
    You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
    browser.gesture.pinch.in cmd_fullZoomReduce
    browser.gesture.pinch.in.shift cmd_fullZoomReset
    browser.gesture.pinch.out cmd_fullZoomEnlarge
    browser.gesture.pinch.out.shift cmd_fullZoomReset

  • I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup

    I have an iphone 4s that i got last week and i set it up just using the phone. today my dad restored it as my mothers iphone so i lost all of my data. I tried to restore it as my original phone i had but i exited out of itunes and now my phone wont showup in itunes or on my computer

    Did you fail to import them to your computer before restoring?
    Not good.
    They are likely gone.
    You can try restoring from backup.

  • Users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply

    Hi All,
    Please help me.
    I have an issue where users are not able to use Outlook 2010 to view free/busy information and cannot set Out Of Office automatic reply. But they are can set Out Of Office automatic reply from OWA. My exchange server is Ms Exchange 2010.
    The test E-mail AutoConfiguration failed with this error:
    Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml starting
    GetLastError=12175; httpStatus=0.
    Autodiscover to https://mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
    Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
    GetLastError=12007; httpStatus=0.
    Autodiscover to https://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x800C8203)
    Local autodiscover for mydomain.com starting
    Local autodiscover for mydomain.com Failed (0x8004010F)
    Redirect check to http://autodiscover.mydomain.com/autodiscover/autodiscover.xml starting
    Srv Record lookup for http://autodiscover.mydomain.com/autodiscover/autodiscover.xml Failed (0x80072EE7)
    Srv Record lookup for mydomain.com starting
    Srv Record lookup for mydomain.com Failed (0x8004010F)
    Any idea?
    Thanks,
    Pieter

    OK.
    Please follow this step.
    1. As you said you are in coexistence step , so for now all endpoint already point to Exchange 2010 right?
    2. Check legacy owa redirect that you already configure
    3. In Exchange 2010 , Make sure that you already configure "Autodiscoverinternaluri" by this command set-clientaccessserver -identity "servername" -autodiscoverinternaluri
    https://autodiscover.domain.com/autodiscover/autodiscover.xml. and don't forget to create autodiscover record in DNS
    4. in Exchange 2010 , Make sure that you already configure "EWS" path by this command set-webservicesvertualdirectory -identity "XXX\Default web site name" -internalurl
    https://yourinternalurl/EWS/Exchange.asmx -externalurl https://yourexternalurl/EWS/Exchange.asmx
    5. don't forget to replicate freebusy from Exchange 2003 to Excahnge 2010 via public folder.
    You error look like client cannot get autodiscover process please check it again.

  • Setting in and out markers for capturing.

    i am learning final cut pro, and have also purchased a new camera. I was under the impression that a tape based camera goes through wear on the heads the more you use it... having said that i just finished chapter eight of capturing video in final cut pro, and am under the impression that i have to watch the video, set my in and out point/ set markers to select the footage to be used, and then it has to play the footage again to capture it?..... so your camera is always going to have to go through the wear of recording original footage,rewind footage...play footage to mark in and out points, and the a third time to capture is this correct? also are a lot of people using these expensive formatting devices that you plug into your camera so when you record your original footage it records on the tape and on this device so you can access the device and not put so much wear on the camcorders tape heads?

    sounds like you are very efficient in your work.
    You have to be if you want to get anything done in a timely manner, and if you want to be able to find footage quickly.
    I thought that i should do that after the fact, but then i thought that in cases of collecting a lot of rough footage that there may be a several areas of footage you dont want to use that you are asking the camera to play when it doesnt need to.
    Exactly why logging your footage is so important. Not only do you see what you have, but you can make sure you don't capture stuff you don't want or don't need, and that saves tons of space. Plus the mere fact you are logging, capturing and organizing your footage means that you are getting more familiar with what you have. This is of MAJOR importance to an editor.
    I am going to be doing this for a living
    Then learning good editing habits early on is a must.
    Lemme take this moment for shameless self promotion, and point out my Tutorial DVD on how to be organized in FCP:
    Get Organized in FCP
    (I may receive some form on compensation in posting the above link)
    Start out organized and you'll find that you edit much faster and more efficiently.
    Shane

  • Setting "in" and "out" - why does it export the full timeline ?

    Hi folks.
    Well, I'm scratching my head.
    I go into Premiere, onto the timeline, and set an "in" point and an "out" point. I then get Premiere to render the video. It renders out the whole timeline, eventhough I told it to render only the "work area" which of course one would think would be that area I told Premiere I wanted, because of my "in" and "out" points.
    The manual is very vague, and I just don't get it. I don't want to do any razor cuts, I just want to get Premiere to render out the video inside my "in" and "out" points I've inserted.
    Any help would be appreciated,
    Dave.

    The work area bar is different than setting in and out points. It's the bar with the (I think) blue handles at the top of the timeline. Drag those handles to the points where you want rendering to start and stop, and hit Enter.

  • Setting In and Out points

    Is it me or is it a complete PAIN to set in and out points in 7? Used to be easy. It's almost impossible sometimes to grab the playback head without it selecting an i/o point. Once I finally do get the markers where I want 'em, the In point moves when I press play?
    What the ****?

    You can use the arrow keys (right left) to step through frames. You can use the letters i and o to set in and out points.
    Hold down the shift key (after setting a point) and you can use the arrow keys to create a selection.

  • Setting in-and-out points  -- is this possible?

    I set in-and-out points in the preview window by dragging the blue triangles.
    I would like to sample various parts of a clip, though there are only 2 triangles.
    1. Is there a way to take one segment of video and establish in-and-out points for maybe the first 30 seconds of video and than set another in point maybe 1 minute later with a out point 30 seconds after that. So ultimately the encoding will encode two non-sequential segments of video.
    Thanks.

    You can't do that, but you can achieve what you want by simply dragging in the clip multiple times into Compressor and for each clip, set your in and out point.

  • Setting in and out points in list view.

    I am in list view.  I am showing several favorited clips from one video.  Say I am playing back the third favorited range and I want to select in and out points for that favorited range.  The video is playing and I hit i.  I am immediately jumped from the favorited range I have selected to the first favorited clip in the list.  When I click back on the clip I was setting the in point for I find that it has set the in point where I wanted.  The entrire process then repeats when I try to select the out point.  Set out point.  Jumps up to first clip.  Click back on original clip to get to my out point.
    This is very frustrating and makes using favorites and list view a huge waste of time.  Can anyone help?

    That should not happen.  Before anythign else, do these two things.
    1- Go into the "Final Cut Pro" menu, "Command", and be sure "Default" is checked.   Quit out of FCP X.
    2- Open System Preferences (Apple menu), Keyboard, Keyboard Shortcuts.  Click the "Restore Defaults" option.  The issue here is OS shortcuts will override app shortcuts.
    3- Launch FCP X and try again.  If that doesn't fix it...
    4- Download the free app "Preference Manager" from  Digital Rebellion (dot com) and use it to delete the FCP X pref files.
    After you've done all of these, report back and let us know what's up.

  • Set desired in and out of audio video in menu...

    Sorry - so basic but can't figure out - how do I set the in and out point for audio playing during the menu and the video that is being viewed in the menu? Thanks!

    You mean using Motion eus? Look Motion Menu up in the manual for the details. It's not intutive. You select the button and then open the inspector and you will see a media tab where you can set the in point. You cannot select the outpoint since Motion Menus are 30 seconds by default. Adjusting the loop point for the entire menu is described, confusingly, in the manual.
    bogiesan

  • In Safari, my iMac sometimes zooms way too much and will not zoom back.  I have a wireless mouse set to zoom in and out on double tap, but the excessive zooms happen with no taps.

    In Safari, my iMac sometimes zooms way too much and will not zoom back.  I have a wireless mouse set to zoom in and out on double tap, but the excessive zooms happen with no taps.  A page zooms in so less than 1/4 of the page is visible and nothing I do will zoom back out, command minus doesn't do it, double tap on mouse does not zoom out, and the window will not scroll to show any of the rest of the page.  reloading the page does not help.  Loading a different page gives me a normal view again.

    If it were a tweaked setting, it should happen less randomly.  And there should be no settings that could override the zoom setting in unversal Access and the Mouse zoom preferences. 
    In addition, this only happens in Safari 6, and seems to happen more fredquently on some websites and not on others.  That suggests some sort of conflict in the site code with Safari and Apple wireless mouse code.  It does not happen in Mail, Word, Excel, Photoshop, Illustrator, or other software as far as I can tell.

  • New problem/bug when I set in and out points on a clip. Unwanted automatic zoom in on clip timeline.

    Playing clips to log and set in and out points for scenes I will use later.  Something changed with the new update and I think it is a bug.  When I hit the I and O keys to set in and out points on a clip before dragging to the sequence, it zooms in on the clip timeline.  I cannot see the full clip time line unless I zoom out which is a pain to do time and time again.  How do I get it back to the way it was before?  It did not used to zoom in and out, it just marked your in and out point as it played leaving the clip timeline unchanged.
    I am using windows 7 with Premiere Pro CC

    Hi,
    Thanks for your post. I think you are using Premiere pro CS6 as the Project option is included in the file menu and in the video there is an option of project available and visible. Please update your CS6 with the latest 6.0.5 update and the issue will be fixed. The link is provided below. Please update once issue is fixed.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5631
    Regards,
    Vinay

  • I lost my ipod touch and never set up gps how to set it up with out having my ipod

    i lost my ipod touch and never set up the gps. How do i set it up with out having my ipod touch

    You can't. You are SOL.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Maybe you are looking for