In Answers Chart Images can't be displayed

Installed BIEE 10.1.3.3.2, run demo, in Answers the chart images can not be displayed.

Hi,
I am having this problem too, installing the ActiveX component hasn't fixed this for me. Everything else works fine but when I try and display a chart the image just displays a red cross?
Any help would be much appreciated,
John

Similar Messages

Image can't be displayed synchronous

Hi Folks
Here is a question about the image obtained from the camera can't be displayed synchronous in the indicator. What I want to do is to display the raw image in the indicator( called "Image"). I already set the indicator as synchronous display, but when I ran it, image couldn't be displayed constantly, always flashed. I probed the wire connecting to the indicator, but the image out gave a constantly, accumulated image. That's so weird that the indicator on the front panel couldn't show the image constantly.
I attached the picture of block diagram and front panel.
Thanks for your help.
Solved!
Go to Solution.
Attachments:
block_diagram.jpg ‏47 KB
front_panel.jpg ‏28 KB

also attach the vi
Thank you so much.
Lu
Attachments:
IMACQ0.9.vi ‏173 KB

Photoshop CS6 shut down after using for 5mins; no image can be display on canvas.

Photoshop CS6 shut down after using for 5mins; no image can display on canvas.

Thanks for your help. Actually the problem was solved when turning off the GPU. In the mean time, I would like to upgrade my Video Card, too. My existing vedio card detials are as below. May I seek your advice on any good method other than replace it.

Problem with Answers Chart Output Not Displaying Last Column, Bottom Label

Good morning --
I have created an Answers chart that has the following characteristics:
- Bar chart
- Should display approx 20 bars
- Data is being returned correctly as a table
What is happening is that the frame for the chart is too small -- as a result, three or four columns are not displaying (with the last one truncated partway into displaying). The default label at the bottom of the chart is also getting cut off.
I have tried to manipulate the size of the container in the Compound View, but this does not help -- the graph expands or shrinks with exactly the same partially truncated set of bars. Added "cell padding" and just had more white space between the edge of the container and the truncated label / bar. I have tweaked the Graph Properties to no avail.
Can you help?
Thanks,
Jason

could it be because the chart is interpreting the values as text values instead of numbers? and 9 would then be much larger than ther other values? I'd try values without comma....tell it it's a numeric value like 12345.67.

Can't install downloads, "Disc images couldn't be displayed"

I have just received my new Lion running Mac Mini. I was able to download the latest version of Flash player, but when I tried to install it the icon would only appear briefly, and would then be replaced with the error "disc images couldn't be displayed" with the reason given as 'no mountable file systems' this is the same for other things I have downloaded. I am (in general) clueless!

Hi, gensat651. Welcome to the Discussions.
DC++ is a Windows-only program. It does not run under Mac OS X, hence you cannot install it under Mac OS X.
To locate freeware and shareware applications for Mac OS X, I recommend searching MacUpdate or Version Tracker. The user-submitted reviews accompanying the listings can be helpful in sorting the wheat from the chaff.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Image can't display

Hi All,
I 'm using this code in my JFrame
image = new imageIcon("http://www.mywebserver.com/imgae1.gif");
but image can't show up after the program start, anyone can help me?
Thanks

Well i don't know if it's only this.
image = new ImageIcon("http://www.mywebserver.com/imgae1.gif");
CU

Dynamic graph can't be displayed when it is printed

I've used crystal report xi for half an year. In recent days , I got two problems. One is that I directly insert a image into the rpt file as OLE object, then I find that the image can be displayed on the report but can be printed with ie's printing function. If I set the PrintMode with ACTIVEX mode of the crystalreportviewer and print with activex component , the image is also visible. The system environment is that crystal report xi and RAS are installed in the local machine, and web server is on the other machine. The report is invoked and displayed using crystalreportviewer component through jsp. The other is that I want to use new feature of dynamic graphic locations, and show different images in the report with the paths which are stored in the database. I've seen the threads in the crystal report forum, and known how to set the paths of images under the unmanagered RAS. But my situation is that I have to publish every rpt files to the BO CRS, so I don't know where I should place the images and how to set the paths. I try publishing the image into the same folder with rpt file in the CRS, but it can't work. Thanks in advance for any help.

Please re-post if this is still an issue to the Java Development - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

Not able to see the generated chart image

I'm using Oracle 6i Reports and Oracle 9i dtabase to generate a report with graphs embedded. I'm able to view the tables populated with exact values but cannot see the graph. The chart image and html generated are placed correctly in the directory pointed to cahedir, but yet I'm not able to see the image. Can you tell me how to congifure the Html output from the server. The server is introducing a base tag pointing to a different location. Can I change the location.

HI
It is still not showing image. Messsage coming is "Right Click Here to Download Pictures. To help protect your privacy. Outlook prevented automatic download to this picture from the internet."
Thanks & Regards,
Ravi Grover

Need help with image upload and preview display

hi guys,
I'm trying to upload image and then display it as a preview, but when upload form submits to the same page image placeholder does not refreshes it's source and displays the same image as before.
Image 4.jpg already exists.
I upload it with nameConflict = "overwrite"
upload form points to the same page, therefore page reloads
In IE image placeholder does not display the new image, but shows the old one until I refresh the page with F5 and resend information, however if checked, image in the file is already different.
In Firefox, sometimes it works and image refreshes, sometimes not.
any help would be greatly appreciated!
cheers,
Simon

Hi Daverms,
With your code you suggest to not only upload the image but make a database entry too. However my intention is to firstly upload the file, and show a preview. Then if user is satisfied with what he sees, he presses "aprove" button and therefore makes a datase entry. Then the photo number will increase by one.
Until user is not aproving the photo he can upload any image again and again, but the new image will be always given the same name (example 4.jpg) and overwriting the old one.
I believe the problem persists because browsers are loading image with the same name from the cache, and not from the actual location. Therefore when I refresh the page it catches the correct image.
If I follow your code, every time I upload the image, name of it is different, therefore browser cannot find it in the cache and is forced to load one from the server.
I wonder is there any way to avoid this cache problem?
cheers,
Simon

Reporting Service chart image switch issue in Outlook

Hello~
I'm receiving report as email everyday.
That email is send by Reporting Service of MS-SQL.
I receive several report similar format as one RDL.
There are chart , table, image.
All objects in Report Mail was rendered MHTML.
However, some Chart image cached in the outlook.
Then sometimes cached chart image displayed other email.
I've changed rendering option of subscription.
It still occur my email.
It might be solved as disable cache option of Outlook account, but outlook is very slow working.
I'd like to know solution as RS side.
Thank you.

Hi,
Have you tried to create a new Outlook profile
for your account? The issue may be caused by the corrupted Outlook profile which is cached to local machine.
After creating a new profile for Outlook using cached mode, the mailbox data is re-synced from server to Outlook client new profile. And hope the issue doesn't happen in the new profile.
Regards,
Winnie Liang
TechNet Community Support

I have a SharePoint list, that list contains photos(images), now i want display that images in spgridview?

Hi All,
i have a SharePoint list, that list contains photos(images).
now i want display that images in spgridview.
How can i display?
Thanks in advance!

Hi,
According to your post, my understanding is that you want to display that images in spgridview.
You can use a hyperlinkfield that is bound to the SPGridView. Please refer to:
Add a Hyperlink Image in a SPGridView
You can also use TemplateField or ImageField to render images. Please refer to:
Image not showing in grid view
In addition, here are two similar articles for your reference:
How To: Use SharePoint 2010 WebParts with a GridView Control to get SQL Image Data
type and other Values
DotNetSharePoint: How to display images in gridview from database using asp.net
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Image deletion won't display in browser

Hey everyone, simplly put I am displaying a picture I have created to the user, after it is displayed I wish to delete it from my drive, the only problem is that the image is deleted before it is displayed, i want it the other way round.
I have created a servlet program which creates the image and sends it to a jsp page where it is displayed. After the code that displays the image executes I create a class where I delete the file. In a perfect world the image would still be displayed in the browser as the file is deleted behind the scenes but in this case the code to delete it deletes it before it is displayed, I have tried a few things including putting the thread to sleep for a few seconds and then deleteing the file, all to no avail. Any ideas?
thanks

Putting the servlet to sleep won't help.
The request for the image is made seperately to the servlet call.
The browser can only request the image once it has received the html page.
Obviously it needs time to receive the html page, send a request back for the image, and then have time to download it before you delete it.
I think the best method would be to schedule a process that deletes image files from a directory (for example) every five minutes (based on their timestamp of file.lastModified() so you don't delete any current ones)
Good luck,
evnafets

Having trouble with image size on new HP2311x display with 4 year old MacBook. Image too small. Do I have to stay in mirror mode? I have messed with OSD and Image Control menus on display and have gotten nowhere. Help?

Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?

Have just installed new HP 2311x display withe 4 year old MacBook. VGA cable. In mirror mode, at high resolution of 1920x1080, image size on HP display is too small. How can I get it to fill screen? If not in mirror mode, the display looks good, only I can't get the top menu bar (tried to drag it) nor the rest of the desktop. Help?

To print an Pie Chart image with more than 1 slice is not working

Hi friends,
I'm using a version 12.0.4 and when I try to generate an Pie Chart image with more than 1 slice using the function saveImage() it's not working. The image is only generate when its return is just 1 value (1 peace of pie).
Anybody help me?
Regards!

It's not unique for your setup, but it also happens in 12.0.11, so it's a bug. Looks like it is throwing a null pointer for some bizzare reason when generating the GIF output by the ImageStorageServlet (per the NW logs).
Your best bet would be to log a ticket so it can be patched.
12.1.7 seems to work fine.
Edited by: Michael Appleby on Nov 23, 2010 2:39 PM

I have an png file that has images how do i display the seperately?

i have an png file that has images how do i display the seperately?
how do i clip the image to an object and use that object to display on an canvas ?

The MIDP API documentation says this of the paint()
method in Canvas class:
Operations on this graphics object after the paint()
call returns are undefined. Thus, the application must
not cache this Graphics object for later use or use by
another thread. It must only be used within the
scope of this method.
The Drawer.paint() operations are NOT executed after the Canvas.paint() but within !
So as long as Drawer.paint() does not start a separate thread (which is not the case here), it NO problem :)
However, you CAN cache the Graphics object, but then you should have some logics like this
if(cachedGfx != currentGfx) {
cachedGfx = currentGfx;
}Brgds,
Eirik Olimstad

In Answers Chart Images can't be displayed

Similar Messages

Maybe you are looking for