In Aperture 2 I could set a print quality of "high" or similar, I don't see such a choice in Aperture 3. I'm using an Epson Stylus 2200. Is there such a choice?

In Aperture 2 I could set a print quality of "high" when printing photos on an Epson 2200. Now I'm using Aperture 3 with the same printer. I don't see a similar choice and I'm getting banding issues on the prints. The photos print much too fast. How do I correct this?

Thanks for the input!
Restarting the computer was the obvious first thing to try, but had no effect.
I have over 2GB free memory and still experiencing the issue.
It does take a few seconds to load the Live View for the first time, but that's not my problem. My problem is that with Live View already loaded, it takes over 30 seconds after saving changes to the php file before I can see the changes in the Live View (I'm clicking the refresh button once a second, and on the thirty something time I'll finally see my changes).
With "Preview Using Temporary Files" turned off, I get the behavior I've been describing.
Turning "Preview Using Temporary Files" on does actually mitigate the issue for me, though, so thank you for that suggestion!
     - I can see changes in my Live View instantly after saving and clicking the refresh button.
     - I can see changes using Preview in Browser instantly too... but the browsers refresh button has no effect (which makes sense since the temporary file it's looking at hasn't changed).
     - I can actually get some work done now.
However, I still feel that I should be able see my changes in Live View immediately after saving and clicking the refresh button without using "Preview Using Temporary Files", and I'd like to be able to leave the page open in my browser and just click the browser's refresh button to see my recently saved changes instantly.
So Long Story Short:
     Using "Preview Using Temporary Files" has definitely helped!
     But I still have no way to see my changes immediately without using temporary files, so something still seems fishy.

Similar Messages

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

I am trying to buy an app (Aperture). I don't see a "buy" icon in the app store. If I go to Apple site, there is a buy icon but when I click it, I get a dialogue box saying the link needs to be opened with an application. Please help. Thanks.

I am trying to buy an app (Aperture). I don't see a "buy" icon in the app store. If I go to Apple site, there is a buy icon but when I click it, I get a dialogue box saying the link needs to be opened with an application. Please help. Thanks.

Hi ...
Installing the OS X Lion Update 10.7.3 (Client Combo) will reinstall the App Store for you.
Restart your Mac after the combo is installed then try purchasing Aperture.

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer.

I customize my paper size and print size and am then viewing a photo on my screen. I print it out and it chops off about 5% of all edges of my original photo on the screen. Why does it do that? It is driving me crazy. I use an Epson Photo 2200 printer

What print and paper sizes are you using? Are you trying to print a borderless print? Does your printer support borderless for that particular size? Are you printing to the custom stock size or to a larger stock size?
OT

I use the Epson Stylus Pro 3800. What is the printer profile to use in the "color management" tab?

I use the Epson Stylus Pro 3800. What is the printer profile to use in the "color management" tab?

See http://forums.adobe.com/message/4483587#4483587

Setting default screen quality to "High"

Captivate v5.5
I am recording some screen shots from our corp. website to slides created in Captivate v5.5. I have set all the slides in Captivate with screen quality "High" yet all the slides I import after recording have screen quality "low".
I know I can change them but wonder is there a way to set the fault screen quality to "high" so all new slides added are "high" quality - or whatever I want them to be rather than having to keep changing them.
Noel

Thank you Anjaneai and Lilybiri,
So the way it works at the moment is this. When you create a project each slide you add will always be set to "low" quality and there is no way to change this in preferences or global settings.
When you preview you work it will be based on "low" quality slides unless you change them one by one as you import them.
Once you have finished the creation of your project and publish it, provided you have made the required changes in Project Settings - all slides that were "low" will be changed to the required quality setting as per the project settings in preferences.
When you open the project again - to edit it for example, I assume the slide quality is still "low".
I agree with you Lilybiri - Slide Quality should be an option in Preferences and the default settings should be "Optimised".
Thanks again both.
Noel

Using a epson photo 2200 printer wirelessly

I have an Epson stylus Photo 2200 printer hooked up to my airport. When I go to print photo quality pictures and go to setting to pick the paper the Epson tools 4 unexpectedly quits. Thus leaving me with no choices in paper..... when I hard wired the printer with a USB it worked as it should.... is this a common problem with a work around or is this the way life is with this printer? Thank you for any help.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Photoshop CS6 on a Mac using an Epson Stylus PRO 3800 printer.

Installed Photoshop CS6 on a Mac Version 10.9.4. Installed an Epson Stylus PRO 3800 printer. When I try to print through Photoshop the dialogue box won't give the option to color manage. I followed the link suggested in the print dialogue box but that was for CS5 and said it will only work with TIFF files. I work with .psd files. I downloaded it but my Mac will not let me open it. Any help would be most appreciated. Mary Ellen

From Chris Cox: If you choose "Photoshop manages color", then Photoshop is managing the color and the printer driver is supposed to disable it's color controls (and let Photoshop manage the color).
If Photoshop is managing the color, then there is nothing else for the printer driver to do - so it grays out it's own color controls because they don't apply while Photoshop is managing the color.

Printing in LR4: what printer profile must be use when using an Epson Stylus Pro3800?

Please help. Thank you.

The printer profile should be something like <Epson Stylus 3800 Epson Ultra Photo Paper Luster>; in other words the profile has to be specific for your printer AND the paper you are using for this specific print.
Your printer came with several profiles for Epson paper. If the paper you are using is not among them, or if you are using a non-Epson paper, you have to download the icc profile for this paper from the paper manufacturer's website, and after downloading it you have to install it. Some profiles are compressed files; these have to be un-compressed (un-ZIPPed) before installation.

I cannot print to my Epson Stylus 2200 printer.

All of a sudden I cannot print to my Epson Sylus 2200 Printer. I am running OSX 10.8.5 and have been using the Epson driver 9.0. I have checked for software dates and there are none. I have unplugged and replugged. I then tried to delete my printer in the printer list and tried to re-add it and a dialogue box came us and says Can’t install the software for the Epson Stylus Photo 2200 because it is not currently available from the Software Update server.

Can’t install the software for the Epson Stylus Photo 2200 because it is not currently available from the Software Update server.
Then download it manually
Epson Printer Drivers v2.18 for OS X

Can I create a printed calendar in iphoto with ipad. Don't see that option.

IPhoto used in past by others in family to create a family calendar as Xmas gift. This year it is my job. Downloaded iPhoto for iPad from App Store. (Paid $4.99). Now can't find path to create a calendar. Description of iPhoto includes calendar, but seems ambiguous on use of iPhoto iPad app for this. Maybe can only do calendars on the Mac version? Can I use iPhoto for iPad to make a calendar?

iPhoto on the iPad can be used to make photo books, but not calendars. It is a very different program from the Mac version of iPhoto. I hope you have access to a mac to create your christmas calendar.
http://help.apple.com/iphoto/ipad/2.0/?handbuch#blnkbc26e276
Search the AppStore for "Foto Calendar". I have not tried any of these apps, but there are quite a few, that claim to be able to create an "Awesome foto calendar"

Poor Colour Print Quality using Canon Pixima 5000

Hi there.
I am printing to an IP5000 off the back of an airport form MBAir with iPhoto. THe colours on the printouts are completely washed out with either a heavy blue tinge (for dark photo's) or redish tinge for lighter photo's.
I have tried HP daily paper 190grm and Kodak, both suffer the same problem, so it feels like the settins or printer driver is at fault.. can anyone point me at a calibration exercise to improve this? or offer any advice?

Hello David,
I use the iP5200 at home for photo printing, which is a slightly later model to your iP5000. From the iPhoto print dialog open and the iP5000 set as the printer, I first select the paper type in the Presets menu, such as Photo Paper Plus Glossy II, which is a Canon 260gsm high gloss stock. Not sure which setting would be ideal for the papers you are using, especially given that the Preset (profiles) are based on Canon papers.
I then click Print to proceed to the normal print dialog and ensure the Color Matching menu is set to Canon Color Matching?
Also, I change to Quality & Media, ensure the media type menu showing the same paper selected in the previous Presets menu and then set the Print Quality to High?
Again, this procedure is for Canon stock. Using the Canon paper profiles may provide the unwanted results you are getting with the HP and Kodak papers, although I have used Kodak photo paper previously and the results have been okay.
If you cannot get a good result for your stock using the Canon paper profiles you may have to look at using ColorSync instead of Canon Color Matching. This would then require you to have an ICC profile for the paper you are using to ensure you get a reasonable result. Check the vendors web site for a profile for the papers you have. This will go a long way to helping you obtain an improved colour output.
Another suggestion would be to purchase a small amount of Canon photo paper. You could then print from iPhoto with the correct paper profile selected and see whether you are happy with the output. This would help determine if the paper is the cause of your current symptom.
Pahu

Epson Stylus Photo 820 print workaround for OS 10.3.9?

Howdy!
I have an Epson Stylus Photo 820 that I'm using under OS 10.3.9- that I can't seem to (directly) print to out of in most applications. It works fine in Safari and Entourage and Quark; but out of Photoshop, Illustrator; InDesign, Word, etc., there's no print option. I have to click Preview first and then am able to print. It doesn't work at all with Adobe Acrobat Pro 7 and one or two other apps. The driver I have installed is version 1.1.0 (I didn't see any updated drivers on the Epson page). The Print Manager sees it in the queue. It's checked and set as the default printer. Yet, I still have the headache.
Anyone else having similar problems? Is there a workaround?
Also- I kind of miss my printing options of my (long gone and MUCH better quality) Epson 740 under OS 9 where I could set the print quality level of the print out. Is there a similar option for the 820 under OS 10.3.9?
Thanks in advance for any help!
G4 Dual Boot, MDD, Dual 1.25 Mac OS X (10.3.9)

Thanks, but the one driver that may have worked (though it states for OS's 10.1.3-10.2.6... there is no 10.3.9 version) has a dead link.
link
This is really frustrating that Epson will take your money and not support their product. No wonder they have a huge class action suit against them.

How Do I Set Print Quality in PSE 10 to above 720 DPI?

Hello Everyone,
I am trying to print a 4888px x 3456px (A4 aspect ratio) to an A4 sheet from an Epson SC-P600 inkjet printer.
In the PSE 10 Print Dialog Box I have set PSE to Manage Colours and selected my printer ICC profile. From the Print Dialog Box's "More Options" window I click Printer Preferences and set the Print Driver's Print Quality to SuperPhoto 5760dpi x 1440dpi.
After clicking OK a few times to get back to the PSE10 Print Dialog Box, I see 720 DPI as the Print Quality value at Item 2 - Printer Settings on the right hand side of the PSE print dialog box. Even if I change the printer driver's print quality to 1440dpi x 1440 dpi, the print quality value remains at 720 DPI at item 2 in the PSE print dialog box.
I expected to see a value of either 1440 DPI or 5760 DPI values in the PSE print dialog box after setting the print quality in the printer driver.
How can I tell the PSE10 print dialog box that my printer is set to 1440dpi, or higher, or will the printer still print at the the printer driver's setting regardless of the DPI value in the PSE print dialog box?

save your settings as a preset... after you click print and change your settings... click on the Presets drop down and save as... it defaults to the last used preset provided you saved your changes.

Document could not be printed - no pages selected to print

I am running into this well-known issue with several documents, but unfortunately none of the fixes I have come across have worked. Some background:
-Using Windows 7 Pro
-Happening with both Adobe Reader XI and Acrobat X, clean installs. and happening on multiple computers, with multiple printers, with multiple domain users.
-Have tried repairing both installations, no success.
-Have tried disabling protected view, changing size of the fit, letting printer determine colors, printing in greyscale, changing setting for "view documents in PDF/A mode" to "never."
-Print as image works, but quality is unacceptable.
-It seems to be isolated mainly to Xerox printers, as I have no issues printing to an HP printer. I am trying different models of Xeroxes with no success, however. I have reinstalled printer driver and verified updated driver for all, issue persists. Printer models are Xerox ColorQube 8700X and 9203
-The PDFs are from different sources, so I can't pinpoint it to one website. Documents contain various financial info, so I can't post here. Any help would be appreciated. I'm probably going to have to try a different pdf reader for these, but that is not ideal, since multiple people need to print these and are comfortable using Adobe software.

I was also receiving the message "The Document Could Not be Printed" I am on 10.6.4 with Acrobat 9.4.1. I did not get the second part of the message though "There were not pages selected to print". Anyway, I got mine to work by going to Preferences - Print & Fax. I selected my printer and clicked Options & Supplies. Under the driver tab I changed the "Print Using:" box to Generic PostScript Printer. I'm not sure if this is what you are supposed to do. I'm not an expert but it worked for me so I am going with it.

In Aperture 2 I could set a print quality of "high" or similar, I don't see such a choice in Aperture 3. I'm using an Epson Stylus 2200. Is there such a choice?

Similar Messages

Maybe you are looking for