In archiving job getting error: F5210 period version is not defined

Hi All,
When trying to execute T-code SARA using object FI_documnt, I encounter an error message :F5210 period version is not defined. Checked tables T070(document type life), table T071 (account type life) and found that they are properly maintained.
What should I do next? Please advice.
Regards
kapil Kukreja

Hi Kapil,
I could not sure what input parameters you have entered. You are recommended to not enter a company code, because if yes, the archiving program has to determine the current fiscal year for all company codes defined in your customizing. This is necessary, as the summary records can not
be archived for the current and the last year.
Please review note SAP note 141322.
Regards, Gordon

Similar Messages

When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?

When I start the Mozilla Firefox I get error message "ReferenceError: Globalstorage is not defined." How to solve this problem?
-Vinayak

Disabling Samsung Caster add-on solved this issue for me.

In SXMB_MONI getting Error as "Party and service not defined "

Hi All,
I am trying to send Purchase order IDOC from ECC-->PI-->ARIBA Network.
The message has failed in PI saying "Party and Service not Defined"
In Trace it says "There is no Interface Determination configured for receiver party 0000100007 and receiver service"
I have created ECC(Sender ) and ARIBA NETWORK (Receiver ) as Business System and Partner type as 'LI'
Please help me .
Thanks,
Akhila.A

Hi Akhila
If the outbound IDoc from ECC uses a partner type other than LS, then you need a corresponding Party for it.
In the party object, you need to set the Identifier accordingly. For your case, it would be something like:-
Agency: The BS name of your sender ECC system
Scheme: ALE#LI or ALE#LI#<Role> (If there is a Partner Role set in the Partner Profile)
Name: 0000100007
When you create your ICO, you need to check "Sender Uses Virtual Receiver" and enter the Party object above.
Rgds
Eng Swee

On Photobox website, when I try to sign in to my account, I get error message: ReferenceError: s is not defined

This only seems to happen on this website

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
>In Firefox 4 Safe mode also disables plugins (Tools > Add-ons > Plugins) and hardware acceleration (Tools > Options > Advanced > General)

Error 32812 (Specified Tag Name not Defined) from FP Read

I built an application using LabVIEW 7.1 and FieldPoint 4.1. It
performed well until about a week ago. Suddenly, I started getting
error 32812 (Specified Tag Name Not Defined) when doing an FP Read to
read all the channels on an FP-RLY-420. This is installed at a
client's site, but my client assures me that nothing changed in the
computer configuration. There is a dual serial card installed (SIIG
Cyberserial DualPCI dual 16550
RS232 Serial I/O Card), which does seem to cause problems (mouse jumps
erratically), and I wonder if this card could be contributing to the
problem, but I'm not sure why I would get the specific error message
I'm getting.
In looking for info on the problem, I did find an article on
registering the MIS files, but I have tried selecting "Find Devices"
through MAX while logged on as an admin, and the error still occurs.
If anyone has any ideas as to what could be causing the problem, it would be greatly appreciated.
Thank you,
Jason

Hello Jason,
I think that the error you are seeing could be caused by either 1) a
mismatch between the tag names saved on your computer and the actual
channel names on the module, or 2) a problem with how the serial port
is communicating with the module (only applies if you are using a
serial communication module, as opposed to an Ethernet module).
For the first issue, you have already tried to reconcile any
differences in tag names by reregistering the MIS files. Since
that didn't work, I would recommend trying to recreate your entire
FieldPoint system in Measurement & Automation Explorer (MAX),
including the IAK file. I know it is kind of extreme, but I would
recommend just deleting your FieldPoint configuration in MAX, deleting
the IAK file, and resetting the address and recreating your
configuration.
I think that troubleshooting a serial communication problem could be a
little more difficult. I would recommend browsing through the
following documents for some possible troubleshooting ideas.
FieldPoint Serial Network Module Common Problems
Let us know if this solves the problem or if you have any further question.
Regards,
Travis Gorkin
Applications Engineering
National Instruments
www.ni.com/support

Error Acct. assgt. category 3 not defined (please check your input)

Hello all I'm trying to create BAPI_PO_CREATE and getting error " Acct. assgt. category 3 not defined (please check your input) ".
What is this Account assignment category concept in SAP ? What input value should i change ?

Hi
In addition to Srinivas, account assigment 3 is missing in OME9 in your case
So before running your Bapi make the necessary settings
Thanks
vishnu

Hi Guys When trying trying to install latest version of Apple software I'm getting error message that Itunes has not been properly installed which is strange as i have been using it no later than yesterday Jan. 24th 2014. can anyone help please?

Hi Guys When trying to install latest version of Apple software I'm getting error message that Itunes has not been properly installed which is strange as I played ' Take Five' two days ago. Can anyone help please?
Jim Houston

Please see this post by turingtest2:

Get error message prop res dll not loaded when try to print on new version of firefox but not internet explorer

Since I've updated Firefox when I try to print off a web page and use properties I get error message, Prop Res DLL Not Loaded. never had that problem before and it don't happen on Internet Explorer.

Do you have a Lexmark printer?
*[[/questions/816793]]
Copy the Lexmark printer DLL file(s) (LX??PRPR.DLL) from the C:\Windows\System32\Spool\Drivers\W32X86\3 folder to the System32 folder

Error saying 'Posting period 000 is not defined for fiscal year variant K4'

Hi All,
   When I try to add a new entry in the transaction OB52, I get an error message saying 'Posting period 000 is not defined for fiscal year variant K4'. The entry that I add is,
Variant           : 0001
Account Type: +
From Period    : 1
Year               : 1995
To Period        : 12
Year               : 2010
From Period2 : 13
Year               : 2000
To period2      : 16
Year               : 2010
Please let me know what customising needs to be done to solve this issue.
Thanks a ton.
Best Regards,
Jeff

Hi,
Hava you checked in OB52 screen, by default 0001 posting period variant will be there for +, A, D, K, S account types.
If it is already existed in your OB52 screen, you won't create one more record with the same name. You have to edit the existing 0001 posting period with new values.
Thanks
Chandra

Getting error message ORA-01034: Oracle Not available

Hi
I have a VM Machine with OEL 4.5 and have oracle 11g release 2 installed but do not have database created.
on the command prompt I am getting error message
ORA-01034: Oracle Not available
Process ID: 0
Session ID: 0 Serial Number: 0
is it because I have not created the database... ?
if yes can some one please guide me how I can create database...
**** Sorry for asking these silly questions however I am new to oracle, just want to kick start my carrier in oracle...**** :-)

ParikshitBhandari wrote:
Hi
Welcome to the forum.
Before proceeding, please read the forum FAQ. The link is in the upper right corner of this very page.
I have a VM Machine with OEL 4.5 and have oracle 11g release 2 installed but do not have database created.
on the command prompt I am getting error message
ORA-01034: Oracle Not available
Process ID: 0
Session ID: 0 Serial Number: 0
is it because I have not created the database... ?Yes, it is because you have not created a database.
It is A Good Thing (tm) that you actually copied and pasted the entire error message. Some here seem to think "it doesn't work" is an actionable error message. However, for future reference, error messages are the result of something happening. They are far more meaningful if you were to also copy and paste the command that triggered the error.
if yes can some one please guide me how I can create database...
Easiest way is to use the utility 'dbca' (database configuration assistant).
**** Sorry for asking these silly questions however I am new to oracle, just want to kick start my carrier in oracle...**** :-)=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Drill down to your product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Tying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Help

am tTying to install itunes and I get error message "This file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel. Can anyone help me?

Hi,
Here is a similar thread for your reference:
There is no email program associated to perform the requested action. Please install an email program or, if one is already installed, create an association in the Default programs control panel
http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/036e3cf6-bff7-4ef2-bd0a-555cd2399ad4
Hope this helps
Vincent Wang
TechNet Community Support

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Swf-version can be specified when using SDK 3.6? [ Error #1065: Variable JSON is not defined ]

I've been using playerglobal.swc of flash player 11 and SDK 3.6.
ReferenceError: Error #1065: Variable JSON is not defined
can be solved by setting -swf-version to 13. (http://forums.adobe.com/message/3933620#3933620)
However, swf-version is not available in SDK 3.6.
Can native JSON be used?
Otherwise, can com.adobe.serialization.json.JSON be used without name conflict?
JSON (from ...\flex_sdk_3.6\frameworks\libs\player\11\playerglobal.swc(JSON))
com.adobe.serialization.json:JSON (from ...\as3corelib.swc(com/adobe/serialization/json/JSON))

anyone know the answer to this?
how are we supposed to use the new player features with using the 3.x SDK?

Get ReferenceError: Error #1065: Variable Transform3DController is not defined. when running debug.

Hi,
I just upgraded my Flash Builder to 4.6. Ever since the upgrade I have been getting the following error right when I run my web files through debug:
ReferenceError: Error #1065: Variable Transform3DController is not defined.
at global/flash.utils::getDefinitionByName()
at ominds.mouseinspect::MouseInspector/onTmd3dModuleLoaded()
I'm not sure if this came from the new upgrade to the builder or if this an issue with the new Flash Player 11,1,102,55 release. It seems that when I got to http://www.adobe.com/software/flash/about/ it doesn't even load the flash movie.
I'm on a Mac OS X v10.6.8 and I use mostly chrome but this issue also occurs in FireFox.
Does anyone have any ideas to wtf is going on?
Thanks,
-Nate

I have been experiencing this same issue. After reading this post a messing around, I also feel like it has to do with either Flashbug or FlashFirebug. So I've been experiencing this issue while trying to launch my application in Chrome. I disabled these extensions and the error when away. I then reenabled the extensions, and the error didn't come back until I launched debug in Firefox, even if I switched to launching in Chrome. I can only guess that these extensions are doing something to the flash player that v11 isn't happy with.
Anyway, even if you're debugging in Chrome, try out disabling these extensions. It's odd, yes, but it worked for me.

Getting error in XI"RFC Program Not Found"

Hi All,
I am getting error in SXMB_MONI "RFC Program not found via SAP XI".
So please suggest me what is the problem behind this..For these SAP XI and R/3 i made 3 to 4 RFC program but only 1 RFC program name not getting Via SAP XI.
Thanks
Amit

Hi,
I am calling RFC FM via SAP XI.
Main Records are coming from siebel and recevied by SAP XI and XI will do some changes in records and calling REC FM from SAP R/3.
Problem is siebel to xi records coming fine but xi to sap R/3 error message coming "Program not Found".
Thanks
Amit

In archiving job getting error: F5210 period version is not defined

Similar Messages

Maybe you are looking for