In argos site, cannot reserve or go to email via cust serv, error200 of just nothing. ie works

it was working till a few days ago, now when i go atry specific parts, eg reserve or order items, or email cust serv, it either just goes blank, or gives error200 message. i tested int explorer, it works.
i'm assuming i have some simple firefox bit wrongly checked, but cannot locate, help please.

Hi,
Have you run this report before you reset the internet settings, logoff and then back?
Did it take effect only reboot the computer without reset the Internet Explorer?
I have take a test on my lab machine, Windows Server 2008R2 DC, Windows 7 client with Internet Explorer 11.
Everything works fine. I didn't need reboot or reset Internet Explorer.
Thus I suggest you use build a test environment -> one Server and one client without any other Server or setting to check the result.
Alternative, you could push the related registry to achieve this:
HKLM\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMap
HKCU\SOFTWARE\Policies\Microsoft\Windows\CurrentVersion\Internet Settings\ZoneMapKey
For more information, please read this article:
How to configure Internet Explorer security zone sites using group polices
http://blogs.msdn.com/b/askie/archive/2012/06/05/how-to-configure-internet-explorer-security-zone-sites-using-group-polices.aspx
In addition, set a logon script to reset Internet Explorer is available. However, it would reset every time when user logon.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Page cannot display error for external user(via aproxy server)

When i click the self service web application via proxy server.
Following error thorugh
Error : Cannot Display Page
You cannot complete this task because one of the following events caused a loss of page
data:
Your login session has expired.
A system failure has occurred.
To proceed, please select the Home link at the top of the application page to return to the
main menu. Then, access this page again using the application's navigation controls (menu,
links, and so on) instead of using the browser's navigation controls like Back and Forward.
Intenally the self service web application is working , Only External(via proxy server(DMZ))
user only not accesible.
External user only got the error.
Thanks
M.Soundrapandian

Hi,
Please do the same practice after enabling debug, it should collect more information about the error.
Note: 249669.1 - How To Collect Apache and Jserv Debugging Details For Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=249669.1
Regards,
Hussein

I can receive email on iphone 4s, but cannot send an email although my server is configured correctly. any suggestions

I can receive email on iphone 4s, but cannot reply or send an email although my server is configured correctly. any suggestions?

iOS:Unable to send or receive mail http://support.apple.com/kb/TS3899

Windows phone (lumia 930) cannot receive office365 email (company email) via internetional data roaming

when I travelled overseas, i found I cannot receive the office365 (company) email via mobile data roaming (even with manual sync), only can get email via WIFI. The internet access is OK, I even can receive the hotmail / gmail / yahoo
mail...
Why?
Thanks!

Lumia 520 - Video playback issues with new IE browser after WP8.1 upgrade
As title says, I'm experiencing many issues in my Nokia Lumia 520 with the new IE browser included in the Windows Phone 8.1 upgrade.
As example, the following page has an embedded video that when I try to play the audio starts but the display comes absolutely black and doesn't respond to the windows button,back,search, anything.... The only way to regain control is pressing the lock/unlock button to restore and reinitiate the browser app:
http://www.engadget.com/2014/09/04/ibm-wants-to-kill-the-hard-drive/
As this example many other websites with videos content like Coursera or Edx my phone has issues to play the content using this new video player embedded in the IE browser included in Windows Phone 8.1 upgrade (Nokia Cyan).
Notes that before this upgrade I haven't any issue with videos reproduction in the browser part of Windows Phone 8 (Nokia Amber).
There is more people experience this kind of problems with videos in the browser?
This is annoying, I'm enrolled in many MOOC courses and my phone was the ideal device to visualize the videos but after the WP8.1 upgrade this use is impossible.
I had no issues with Youtube website, so I don't know if this is an issue with specific kind of video format like flash(flv),mp4 vs. html5,etc. What I know is that my Lumia with WP8 had no issues with this websites,no matter the full-screen approach, but now with WP8.1 is a painful experience.
I would like to know the experience of other users about this topic.
Thanks and I hope Microsoft/Nokia dev team see that and fix asap

A connection to the SharePoint site cannot be established. To synchronize or refresh your list, you must be able to connect to the SharePoint site

Hi,
I have a SharePoint 2010 farm with two Web Applications.
For example:
https://contoso.domain.com
https://finance.domain.com
Both Webapp use https --> 443. Same valid certificate for both (*.domain.com)
I tested exporting an Excel library in https://contoso.domain.com.
It export and sync up sucessful the Excel library and it updates it OK.
However, once exported the Excel library in https://finance.domain.com, when
I try to syncronize or update the library I receive an error back, which indicates: "A connection to the SharePoint site cannot be established. To synchronize or
refresh your list, you must be able to connect to the SharePoint site". I had tested the WebDav (Map Network Drive) and the connection results OK.
Do you have any idea about this issue?? Why https://finance.domain.com do not
synchronize or refresh in excel o SharePoint site???
I had tested the security with IIS, SSL, WebDav.
Thank you,
Gaby

Hi!!!
I solved this problem.
I created a new Application Web in the farm (https://project.domain.com), dismount content database the old application web ( https://finance.domain.com)
and the new application web (https://project.domain.com).
#New AppWeb project.domain.com
Get-SPContentDatabase -WebApplication https://project.domain.com | Dismount-SPContentDatabase -WhatIf
#Old AppWeb
Get-SPContentDatabase -WebApplication https://finance.domain.com | Dismount-SPContentDatabase -WhatIf
Mount the old content database to the new application web (https://project.domain.com).
Mount-SPContentDatabase "WSS_Content_Finance" -DatabaseServer "MyServer" -WebApplication https://project.domain.com
If you want to keep the same url, change the alternate access mappings.
Remember to change the bindings in IIS.
Hope you help the solution...
Gaby

Some sites cannot be accessed after Mountain Lion

Since I have downloaded Mountain Lion I cannot access the sites of my employer anymore (www.superiorenergy.com) Also I cannot access our portal for the intranet and not receive my email via Outlook and webmail. It seems that always when "superiorenergy." is part of the URL, I cannot login. Any solutions for this issue guys?? Its getting pretty annoying. Even out IT guys do not know how to fix it.
Thanks for your comments in advance! Aprreciate some assistance!
Regards,
JAN

Using the Mountain Lion I can go to this site- www.superiorenergy.com with no problem. As a start I suggest you review your network connections. It might be helpful to create a new test location and reset your network connections and see if that doesn't allow you to connect.

Forms 9i Runtime causes "Web site cannot be displayed" message

I'm running Forms Developer 9iDS on Windows NT and IE ver 5.5. Whenever I try running a form from builder IE returns the message "Web site cannot be displayed". Is there any problem with settings/installation?

Hi,
This error message sounds like a Browser message from IE. This means that the URL called does not exist or cannot be served due to a server unavailability. Did yu start teh OC4J instance? Go to the Windows start bar, the iDS folder, Forms and the click on "start OC4J inszance".
Frank

Cannot setup Blackberry Internet Mail - get error: The site cannot be accessed in this manner.

I am trying to setup email on my Blackberry, when i load the link I get error:
The site cannot be accessed in this manner. Please use the URL or link provided to you by your service provider.
Please help..
Cathy

I'm not sure why that is not working for you.
North American Carriers - scroll down to select your carrier and login.
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT201412 cannot reserve iPhone5 via online system for this two days, if order is stop, please do not link us to the webpage and it just make people confuse all the time!!! :(

your online reserve systemis out of order for the pass two days, if it cannot allow to reserve online, please let us know and don't always just show error message when click "summit" button PLEASE!!!

Good afternoon Folv-
Welcome to Best Buy Unboxed forum!
Purchasing on BestBuy.com is an easy and convenient way for you to shop with Best Buy. I am disappointed to learn of all the issues that have risen after you tried to upgrade your recent purchase. There has been a lot of confusion and I know that many people have tried to take care of you.
I have used the email address that you used to register on the forum to locate your orders. After carefully reviewing your purchases, I have additional information that I would like to share with you through a private message. Please log into the forum and select the envelope icon located in the upper left hand side of the forum.
Respectfully,
Karina|Social Media Specialist | Best Buy® Corporate
Private Message

My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

HI again Andy,
The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
which (I thought) worked better than the "throwaway" ones I had used previously.
You think it is the hub or something connected to it that may be causing the problem?
Regardless, thank you for your time, and I hope to hear from you soon.

Information you exchange with this site cannot be viewed or changed by others, However there is a problem with the

Team,
Getting below X mark for couple of users when they are using outlook.
Information you exchange with this site cannot be viewed or changed by others, However there is a problem with the
site's security certificate
X- the security certificate was issued by a company you have not chosen to trust.
view the certificate to determine whether you want to trust the certificate authority.
we have 2 child domain namely us.com and emea.com.
us.com users are getting a certificate pop up on outlook , but the entry on the top is showing as server.emea.com which is not belongs to us.com
checked the certificates on us child domain cas/ht server and there are no SAN entry listed for emea.com, it was working earlier and started week back.
any help in this matter is appreciated.
regards
Srinivas
Srinivasa K

Hi,
According to your description, your Outlook clients on child domain us.com come across the security alert about one name of another child domain. If I misunderstand your meaning, please feel free to let me know.
If yes, I'd like to recommend you check if there is any URL which is set with the name. Additionally, please check if there is any expired certificate.
Thanks,
Angela Shi
TechNet Community Support

Cannot connect to Oracle 11gR2 database from SQL Server 2005

Both SQL Server (Windows) and Oracle (Linux) are in 64bit environments.
I have done the following on a Windows 2008 R2 with SQL Server 2005:
Install InstantClient from Oracle Database 11g Release 2 Client (11.2.0.1.0) for Microsoft Windows (x64) to C:\Oracle
Install oledb from 64-bit ODAC 11.2 Release 3 (11.2.0.2.1) for Windows x64 by executing install.bat oledb c:\oracle odac
Note: Not sure whether 11.2.0.2.1 version of ODAC will cause any problem since I cannot find 11.2.0.1.0 version.
I have checked the Allow inprocess of OraOLEDB.Oracle provider in SSMS.
I have executed sp_addlinkedserver @server = 'ORACLE_TEST', @srvproduct = 'Oracle', @provider = 'OraOLEDB.Oracle', @datasrc = '##.##.##.##:1521/TEST'
The ##.##.##.## is the ip address of the Linux server which has the Oracle 11gR2 database TEST.
I have executed sp_addlinkedsrvlogin @rmtsrvname = 'ORACLE_TEST', @useself = 'FALSE', @rmtuser = 'xxxx', @rmtpassword = 'yyyy'
The xxxx is the oracle username and yyyy is the password for the oracle user xxxx.
I know the oracle database TEST is up since I have setup connection in Oracle SQL Developer having:
##.##.##.## as the hostname
1521 as the Port
xxxx as the username
yyyy as the password
TEST as the service name
When I click Test Connection for the linked server ORACLE_TEST in SSMS, it just hang.
When I issue a query like select count(*) from oracle_test..xxxx.table1, it just run forever. I'm not so sure how to query an oracle table. I have also tried select count(*) from oracle_test.xxxx.xxxx.table1.
When I retype the password in the Linked Server Properties, it just run forever.
Do I need to create a tnsnames.ora on the Windows machine?
Do I need to change the tnsnames.ora on Linux machine?
I'm very new to Oracle.

This forum is dealing with connections from an Oracle database to SQL Server - so the Oracle database is the driving site and this is the way round from your linked server set up.
As you're suing the instant client you might post your issue in the instant client forum:
Instant Client

Multipe discussion boards within one site collection, each with their own email?

So we use several list servs and these have become an issue and the data is lost discussion based on you cannot collectively house and search for information and attachments.
I have a few questions that maybe you could help in my research:
1) Is SharePoint discussions capable of having multiple discussion boards in one site collection, each with their own email address to replace the function of a list serv (so at a minimum content can be organized, with attachments available, and replies
can be seen/sent via email.)
2) From an attachment perspective; what is the best way to ensure virus blocking in the above scenario IF the above scenario is able to be done
3) Is there OOTB functionality here or is there a recommended third party product? (I am not looking to build out a custom solution if at all possible to avoid that)
any thoughts or input here would be greatly appreciated!
~Kat

1) - Yes, discussion boards are just specially formatted lists and yes, each discussion board can have their own email address.
2) - Blocked file types can be configured in CA and I believe that SP will strip out any emails with blocked file types attached (not 100% on that, probably 95% sure)
3) All out of the box (assuming SP will block the attachments as I assumed in #2

Expand a Stand-Alone Primary Site into a Hierarchy with CAS using the same server?

Currently i have a single server lab deployment of SCCM 2012 R2 which has all the CM roles and SQL server also installed on it. I want to expand the standalone primary site configuration into central administration site but i'm not sure if i can do
it on the same site system server or if i must get a second server up to do it?
I read through http://technet.microsoft.com/en-us/library/jj591551.aspx and all the leading articles but i don't really seem to find this information anywhere.
thanks.

CAS and Primary Site cannot be installed on the same server.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

When I login on my When I sign in to a site on my ipad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.

In argos site, cannot reserve or go to email via cust serv, error200 of just nothing. ie works

Similar Messages

Maybe you are looking for