In attempting to send a message to one particular contact in my contact list, the answer says not delivered. Why?

When I attempt to send a message to a particular contact on my contact list, it says 'not delivered.' Why this particular contact? None others.

I am guessing you mean an iMessage.
The recipient may not have their Apple device on WiFi at the time you send the message.

Similar Messages

  • TS2755 I am not able to send text messages to one particular person.  Error comes back to enter a valid 10-digit phone number.

    I am not able to send text messages to one particular person.  Error comes back to enter a valid 10-digit phone number or short code.  I have deleted this contact and re-entered numerous times and still get the same error code.  Any ideas?

    Are you entering a 10 digit number? Or, if it is not a North American number or you are not in North America, are you entering "+" followed by the country code and number?

  • Why isnt my imessage sending my messages to one particular number who has an iphone but will send it to someone else who does?

    i texted this number last night and it worked but when i tried again today it keeps saying not delievered everytime i try to send one.

    But if that person did not set up an iMessage account on their iPhone, then they cannot receive any iMessages at all, only SMS text messages.
    Both the sender and the recipient must have an iOS device with an active iMessage account.
    There is nothing you can do about it, other than ask them to set up iMessage on their device (which if they don't want to, is their choice).

  • Imessage is not working, but only for one particular contact.

    I cannot send/recive imessages from one particular contact, messages are sent as SMS. All other contacts are fine with imessaging, so why just this particular one? Please help??!!

    If you can send imessage to other users execpt for this one particular person.  Then the issue would be with him/her and not your phone.  That person will have to figure out whats going on.

  • Can send text message to one person (2nd attempt)

    I accidentally marked an answer as the correct solution and can't unmark it so I'm trying again.
    I have a 4-S and whenever I try to send a text to  one particular number, the number comes up green (instead of blue or black) and the message doesn't get sent.  Below, in red, it says "Not Delivered"  Any thoughts?  Any way I can fix this?
    And, yes, the iMessage setting is on.
    iPhone 4S, iOS 7.0.4

    Try deleting all of her contact information from your phone and any existing message threads. Reset the phone by pressing and holding the Home and power buttons until the silve apple appears. Then, when the phone has restarted,  add her contact information back.

  • HT201415 i can only send text messages to one of my IPhone contacts. How can i change it back? ive tried restarting, deleting contact and adding back, turning off Imessages and then back on. not working

    i can only send text messages to one of my IPhone contacts. How can i change it back? ive tried restarting, deleting contact and adding back, turning off Imessages and then back on. not working

    I WANNA SAY IPHONE ONWER PLEASE FORGIGE US AND GIVE DEGRADE OF ISO 7 TO ISO 6
    ISO 7 IS BULLSHITTTT
    PLEASE DO IT AS SOON AS POSSIBLE....,,,,.....

  • When I attempt to send a message the app quits immediately as I hit the send button.

    When I attempt to send a message the app quits immediately as I hit the send button. iMessage also doesn't work. I have tried restoring it and that has failed.

    You mentioned that you tried restoring....have you restored your phone as a NEW device (NOT using your backup)?
    Restore your device as NEW.  DO NOT add any apps other than those included with iOS 5.  Try sending messages.  If your phone works, then add your apps back.  If not, then you have a hardware failure and you'll have to bring your phone to Apple for evaluation.

  • Two attempts to send a message in Mountain Lion

    Hi all.  A question regarding messages in Mountain Lion. When I open up Messages and send a message to an imessage contact, it always takes two attempts to send the initial message. Any messages after that go instantly.
    If I then send a message to a different imessage recipient once again it takes two attempts to send on the initial message.
    Anyone having the same issues?

    File menu (Alt+F) > compact folders,

  • Cannot send text message to one mobile number

    Recently moved from iphone 4 to iphone 6 and changed the carrier from Tmobile to Verizon, post this change I am not able to send text message to one specific mobile number. The other person can send text to my number. The message sent to this specific phone number from iphone 6 appears green as sent but is not received by the other specific number. I can send messages to all the other friends but not to this specific number. The other person reached to his carrier (Tmobile) and they confirmed that it is not coming in their network after doing the testing from my end. This problem started when moved from Tmobile to verizon.

    Hi,
    This was already checked with the Tmobile carrier and their technicians as test from verizon side. It is not that it is not being received on their network, the issue is it is not being sent out from Verizon network. I have checked in my online account of Verizon with my SMS usage and it shows that no SMS has been sent out to this T-mobile number. I have tried sending SMS 30 - 40 times and there is no record in my online account about the SMS sent out. This means that the SMS is not going out from verizon network to this specific user. I hope I have made myself clear here in terms of issue definition. I have tried all possible options of deleting message thread, deleting contacts at both the sides, resetting network, switching off imessage, Airplane mode on-off, sending SMS by adding 001 to the mobile number etc.
    Kindly help urgently.

  • My phone has stopped sending text messages to one specific number. It says it sends, but nothing arrives. Any tips?

    My 3G iPhone has stopped sending text messages to one specific number. It says its sent but it does not arrive. Any ideas?

    Are you seeing this problem when sending a SMS, MMS or iMessage? Does it go away if you disable MMS or iMessage in Settings > Messages?
    Make sure the phone number that you aren't able to send texts to has an area code.
    If that doesn't help, take a look at this Apple doc -> iOS: Troubleshooting Messages

  • Why can`t i send a message to one of my contacts? i can call her

    why can`t i send a message to one of my contacts? i can call her and recive messages.

    The person that you want to reach must be setup and registered to use Messages on their own device before you can reach them and Messages only works with other iOS users and Macs running Mountain Lion. If you know that they are setup for Messages go to Settings>Messages>Show Subject Field>Off. Make sure it is turned off.

  • My phone (4S, iOS 6) will only send text messages instead of iMessage to one particular contact (iPhone 5). Why this? We are both able to iMessage all our other iOS 5 and 6 contacts!

    We also tried to deactivate and activate iMessage in "Settings", but still it will only send text messages.. We have tried within wifi-areas as well.

    Niall101 wrote:
    Is there some way to remove her from my 'iMessage contacts list' (i.e.  Not have the little blue iMessage bubble beside her phone number when I try to compose a new message to her)?
    No, you can't. Your friend would have to do that. The fact that she has turned iMessage off should do this.

  • I have a white iPhone 4S. For some reason I cannot MMS only one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text.why!

    I have a white iPhone 4S. For some reason I cannot send media (picture,video,etc.) with one of my contacts. I'll send a picture or video and it will go through, say delivered underneath the picture, then 30 seconds later it will say not delivered and I have to send it as a text message. Why is this happening!? It happens connected to wifi and not connected to wifi.
    I appreciate the help, thank you!

    If it says "Delivered" under it to begin with, then you're not sending it as an MMS, you're sending it as an iMessage. It's entirely possible the problem is on the receiving end.

  • How do i send a message to all my contacts on skype at once using MAC ?

    how do i send a message to all my contacts on skype at once using MAC ? it works on windows with Clownfish but not mac?

    Hi Body, Here is how you can send a message to all of your contacts and keep sending untill you close the skype application: 1 - Open any one of your skype contact as you would normally open for sending a messages or chatting.2 - click the + icon on the top.3 - select "Add People"4 - Now there will be two windows one is filled with your existing contacts and the other one is for selected contacts that you want to add as recievers5 - In left Panel, select all of your contacts and add them to right panel. ( You can do it by Pressing "CTRL+A".6 - see the bottom under left panel and press "Select"7 - Now you will see all your contacts in right panel8 - press "Add" button under right panel9 - done!

  • I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone.

    I just bought an new ipad mini with wifi and cellular. Is there any way to send text messages to people and contacts that do not have iphones such as friends with blackberrys or a samsung galaxy smartphone from this ipad. Everytime I try to send a message to a person that does not have an Apple product ( Iphone or Ipad ) it comes up saying contact is not registered for iMessage and wont send it. I can only send them a message from my iPhone 4 instead. Do I have to install a new App from the App store to send these non iMessage cell users a message?

    FYI
    Complete guide to using iOS 6
    http://howto.cnet.com/ios-6-complete-guide/
    Guide to Built-In Apps on iOS
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
    You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    http://www.youtube.com/watch?v=YT2bD0-OqBM
    http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
    http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

Maybe you are looking for

  • Bussiness area balancesheet

    hai to all sap gurus, my client wants to get the business area wise balance sheet, but in f.01 when iam giving the business area iam not  able to get balance sheet, pls anybody help me out. thanking u

  • BULK COLLECT QUERY REWRITE

    I understand that Oracle 10g will rewrite your CURSOR FOR LOOP statements into a BULK COLLECT statement. I am contemplating no longer explicitly writing the BULK COLLECT from now on as it reduces the number of lines of code and greatly simplifies cod

  • Automatically open downloaded file?

    Hi, Dies anyone know if there is a way to have files automatically open after they are downloaded; especially MS Office and pdf files? All my files are download to a "Downloads" folder and then must be opened from there. Thanks!

  • Activating Standard Work Flow

    Hi All,       How can I Activate the standard workflow?How to trigger the standard work flow  when  ever a button is clicked on the protal page suppose "SAVE" Button. Thanks In Advance, Any links and documents are encouraged Regards Pavan

  • Period Comparison - getting not a valid month error

    I am trying to do a period comparison. I have the query condition as select ppv.draft_invoice_num ,ppv.ra_invoice_number ,ppv.invoice_date , idv.expenditure_item_date ,ppv.gl_date ,ppv.gl_period ,to_date(ppv.gl_period,'MON-YY') --,idv.bill_amount --