In auto provising scenario how i can recived incoming calls on PAP2

HI
   i need help reagrding , when i use PAP with auto -provising with my VOIP service provider what are ther differnt profile parameters need to set in profile which is store at service provider provising server . plz give me detail list of such parameters due to which i can able to recive a calls currently i am not able to recive calls
  if u give me solution with differnt parameters like NAT parameters &sip parameters, differnt ports so i adivce my service provider make profile for my PAP2 with inclusion of such parameters. also please note in such auto- provising scenario PAP2 just plug to ur DSL modem or ur router, i also do the same but i can recive a calls. so please give me solution of such parameters so i can able to recive calls on my pap2
thanks
amit

I actually found it! It was in the settings in my phone, but was under a bunch of different names.  Do you know if there is anyway to block them from leaving a voicemail as well? I have searched the app store and can't seem to find one that does it. Everyone says Google Voice but I can't seem to set it up correctly with my phone because it says my carrier doesn't work with it or something.

Similar Messages

  • How I can make a call on my iPad 3G

    I buy a secondhand iPad first generation with 3G but how I can make a call ?

    Also forget about sending SMS text messages - the iPad internal modem is only used for cellular data.
    Can be a real pain when using prepaid SIMcards that require sending SMS text messages to top up
    3G prepaid internet on an iPad

  • Hi, I have a macbook pro and when using FaceTime outgoing calls it says connecting but it never connects, however, I can receive incoming calls. Does anyone have any suggestions please?

    Hi,
    I have a macbook pro and when making outgoing calls on facetime I get to connecting but it never does connect, however I can receive incoming calls. Any suggestions please?

    Hey there kakitiga,
    It sounds like you are trying to make a call with FaceTime, it never finishes connecting to the person you are trying to reach. I want to recommend the troubleshooting steps from this article named:
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/ts4185
    If you encounter issues making or receiving FaceTime calls, try the following:
    Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
    Verify that the Date, Time, and Time Zone are set correctly:
    From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
    Enable "Set Automatically".
    Click the Time Zone tab and confirm the closest city is correct.
    Verify that both parties are connected to an active broadband Internet connection.
    See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
    Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
    If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
    Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
    Verify that both parties have installed the latest software updates for their Mac and/or device. See:
    Mac OS X: Updating your software
    iOS: How to update your iPhone, iPad, or iPod touch
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How do I retrieve incoming calls for the past one month?

    How do I retrieve incoming calls for the past one month?

    You can open the phone app and tap on recents at the bottom of the screen that's about it

  • Iphone 5s cannot call out any calls, but still can receive incoming calls and sms

    Hi
    anyone experiencing this problem? After buying iphone 5s less than 2 months which I never did in the past, I could no longer make any phone calls out, yet i still can receive incoming calls and data.
    Could someone kindly assist in this? 

    Contact your carrier. Phone functions are a carrier responsibility. Have them check your account. Are you seeing any error messages?

  • How do I extend incoming call duration before voicemail activates ?

    How do I extend incoming call duration before voicemail activates ?

    I had this problem and for 12 months no one could tell me how to fix it.
    Finally a young kid told me.  Get onto your carrier web site, in this case Telstra in Australia,
    and you will search for ringing or similar and there should be instructions how to do it. It worked!!!
    good luck

  • HT201412 After I dropped my iphone 4s my back glass broke and now my screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other source and also tried pushing the home and power button.

    After I dropped my Iphone 4s my back glass broke and now the screen won't turn on neither respond to touch but i can hear incoming calls and notifications. I tried pluggin to computer/other power sources and also tried pushing the home and power button together for about 20 seconds

    It's broken due to neglect, namely being dropped.  Replace it.

  • How to block private incoming calls on iphone4, how to block private incoming calls on iphone4

    how to block private incoming calls on my i phone4

    It might not be any use to your situation but I find adding a default ringtone to those unwanted callers helps me decide whether or not to pick up the phone.
    If it's cold callers that trouble you I would defintely reccomend this option.
    If they know your not answering they will (although it may take some time) leave you alone.

  • Can accept incoming calls but cannot make outgoing...

    So I've been in this one skype group for a few months, and everything's been fine up until this point. What's happening is that I try to call the group, which I've never had a problem doing, but it just keeps calling and calling and no one receives it. I can't end the call either, I have to wait until it finishes "trying" to call. I can receive incoming calls with no problem though. 
    I've also been having a small problem every now and then where I lag out of a call, and I know this has nothing to do with my internet because everything else is working perfectly fine.
    I have Windows 7, do not have the latest version of skype because I don't like it at all... And I know that can't be the problem because the older skype's been working fine for years. I'm not sure what could be causing this problem now, but if anyone could suggest something I can do to fix it (without updating skype), I'd be really grateful. 

    Posted: Nov 25, 2010 5:17 PM
    If your facetime does not work and you don't see the facetime button when you try to initiate a call try texting yourself. Sometimes your phone company has deactivated your text messaging when you hook up your new Iphone 4. Phone them and get it reactivated and it will work. You need three things to activate facetime. 1. Cell phone service (naturally) 2. connection to a router (wifi) and 3. text messaging that works. A text message is sent to complete the connection.
    Have a great day and enjoy facetime.
    Wayne Howkins

  • How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

    I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
    Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

  • How do i bar incomming calls when roaming but still receive messages

    How do i bar incomming calls when roaming but still receive messages

    I had this facility on my nokia phone. So iphone cant. Thanks for info

  • How to know your incoming call is on call conference

    How to know your incoming call is on call conference

    Hi amit,
    Thanks for the  reply.
    But i already mentioned  that my users cann't search using tables.
    I want to know that  whether any tcode is there to display the all incoming invoices created  including with ALE-idoc also.
    Thanks,
    Vamshi.

  • HT4623 on my network tab it says sim not provisioned? how that can be resolved

    can some one please help me. on my network it says sim not provisioned. how it can be resolved.

    can some one please help me. on my network it says sim not provisioned. how it can be resolved.

  • CME\7960 running SIP firmware - How do i setup incoming calls? - Can anyone help please?

    Hi Guys,
    I have a SIP trunk setup with a 2811 running CME version 7.  I can make outbound calls ok but having issues getting the incoming calls working, i have 1 number on my SIP trunk and that is 01133501788 and i want that to ring my Cisco 7960 which is running SIP firmware not SCCP.  I have included by config for anyone who can help me, i just want the incoming call to work. 
    Many Thanks.
    Matthew.
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    no aaa new-model
    clock timezone GMT 0
    dot11 syslog
    ip source-route
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1
    ip dhcp excluded-address 10.10.10.1
    ip dhcp pool DATA_POOL
       network 10.10.10.0 255.255.255.0
       default-router 10.10.10.1
       dns-server 188.92.232.50 188.92.232.100
    ip dhcp pool VOICE_POOL
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 188.92.232.50 188.92.232.100
       option 150 ip 192.168.1.1
    ip name-server 188.92.232.50
    ip name-server 188.92.232.100
    no ipv6 cef
    multilink bundle-name authenticated
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    sip
      bind control source-interface FastEthernet0/1.20
      bind media source-interface FastEthernet0/1.20
      registrar server
    voice class codec 1
    codec preference 2 g711ulaw
    codec preference 3 g711alaw
    voice register global
    mode cme
    source-address 192.168.1.1 port 5060
    max-dn 144
    max-pool 42
    load 7960-7940 P0S3-8-12-00
    authenticate register
    tftp-path flash:
    create profile sync 0008072514198272
    voice register dn  1
    number 6999
    allow watch
    name SIP
    label SIP
    voice register pool  1
    id mac 000F.902B.40E0
    type 7960
    number 1 dn 1
    dtmf-relay sip-notify
    username cisco password cisco
    codec g711ulaw
    voice translation-rule 1
    rule 1 /^9\(.*\)/ /\1/
    voice translation-rule 2
    rule 1 /^6...$/ /4143*002/
    voice translation-profile DiscardDigit9
    translate calling 2
    translate called 1
    voice translation-profile IncomingSIP
    translate calling 1133501788
    voice-card 0
    no dspfarm
    username matt privilege 15 secret 5 $1$DCD0$SjWqnKgDSGVzzIKRerXh11
    archive
    log config
      hidekeys
    interface FastEthernet0/0
    ip address 194.12.0.222 255.255.255.252
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1.10
    description DATA
    encapsulation dot1Q 10
    ip address 10.10.10.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface FastEthernet0/1.20
    description VOICE
    encapsulation dot1Q 20
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 194.12.0.221
    ip http server
    ip http authentication local
    no ip http secure-server
    ip nat inside source list 1 interface FastEthernet0/0 overload
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 1 permit 10.10.10.0 0.0.0.255
    tftp-server flash:P003-8-12-00.bin
    tftp-server flash:P003-8-12-00.sbn
    tftp-server flash:P0S3-8-12-00.loads
    tftp-server flash:P0S3-8-12-00.sb2
    tftp-server flash:P003-8-12-00
    tftp-server flash:P003-8-12-00.loads
    tftp-server flash:P003-8-12-00.sb2
    tftp-server flash:SIP000F902B40E0.cnf.xml
    control-plane
    mgcp behavior g729-variants static-pt
    dial-peer cor custom
    dial-peer voice 2 voip
    description Outgoing Geographic
    translation-profile outgoing DiscardDigit9
    destination-pattern 0[7]........
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.cloudcalling.co.uk
    dtmf-relay rtp-nte
    no vad
    dial-peer voice 1 voip
    description IncomingSIP
    translation-profile incoming IncomingSIP
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.cloudcalling.co.uk
    incoming called-number .T
    dtmf-relay sip-notify rtp-nte
    no vad
    sip-ua
    credentials username 4143*002 password 7 password realm sip.cloudcalling.co.uk
    authentication username 4143*002 password 7 password
    nat symmetric role passive
    nat symmetric check-media-src
    calling-info sip-to-pstn number set 4143*002
    no remote-party-id
    retry invite 3
    retry register 3
    timers connect 100
    registrar dns:sip.cloudcalling.co.uk expires 60
    sip-server dns:sip.cloudcalling.co.uk
      host-registrar
    gatekeeper
    shutdown
    telephony-service
    load 7960-7940 P0S3-8-12-00
    max-ephones 24
    max-dn 30
    ip source-address 192.168.1.1 port 2000
    max-conferences 8 gain -6
    web admin system name Admin secret 5 $1$Fktw$t9GQkdDdHmoYdwptO8.or.
    transfer-system full-consult
    create cnf-files version-stamp Jan 01 2002 00:00:00
    line con 0
    line aux 0
    line vty 0 4
    login
    scheduler allocate 20000 1000
    ntp server 85.119.80.232
    end
    Router#

    You my friend are a star! worked straight away, many thanks.  Just one more thing, when i make an outgoing call, it always appears as "blocked" on my phone, my sip trunk is set to allow CME to alter outgoing CLI's how would i program the outgoing CLI to 01133501788 also?
    The new working config is below with your suggestion, which works!
    version 12.4
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    boot-start-marker
    boot-end-marker
    logging message-counter syslog
    no aaa new-model
    clock timezone GMT 0
    dot11 syslog
    ip source-route
    ip cef
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1
    ip dhcp excluded-address 10.10.10.1
    ip dhcp pool DATA_POOL
       network 10.10.10.0 255.255.255.0
       default-router 10.10.10.1
       dns-server 188.92.232.50 188.92.232.100
    ip dhcp pool VOICE_POOL
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.1
       dns-server 188.92.232.50 188.92.232.100
       option 150 ip 192.168.1.1
    ip name-server 188.92.232.50
    ip name-server 188.92.232.100
    no ipv6 cef
    multilink bundle-name authenticated
    voice service voip
    allow-connections h323 to h323
    allow-connections h323 to sip
    allow-connections sip to h323
    allow-connections sip to sip
    no supplementary-service sip moved-temporarily
    no supplementary-service sip refer
    sip
      registrar server
    voice class codec 1
    codec preference 2 g711ulaw
    codec preference 3 g711alaw
    voice register global
    mode cme
    source-address 192.168.1.1 port 5060
    max-dn 144
    max-pool 42
    load 7960-7940 P0S3-8-12-00
    authenticate register
    tftp-path flash:
    create profile sync 0015244443466064
    voice register dn  1
    number 6999
    allow watch
    name SIP
    label SIP
    voice register pool  1
    id mac 000F.902B.40E0
    type 7960
    number 1 dn 1
    dtmf-relay sip-notify
    username cisco password cisco
    codec g711ulaw
    voice translation-rule 1
    rule 1 /^6...$/ /4143*002/
    voice translation-rule 3
    rule 1 /^01133501788$/ /6999/
    rule 2 /^1133501788$/ /6999/
    voice translation-profile IncomingSIP
    translate called 3
    voice translation-profile Translatetrunk
    translate calling 1
    voice-card 0
    no dspfarm
    username matt privilege 15 secret 5 $1$DCD0$SjWqnKgDSGVzzIKRerXh11
    archive
    log config
      hidekeys
    interface FastEthernet0/0
    ip address 194.12.0.222 255.255.255.252
    ip nat outside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1
    no ip address
    ip nat inside
    ip virtual-reassembly
    duplex auto
    speed auto
    interface FastEthernet0/1.10
    description DATA
    encapsulation dot1Q 10
    ip address 10.10.10.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    interface FastEthernet0/1.20
    description VOICE
    encapsulation dot1Q 20
    ip address 192.168.1.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly
    ip forward-protocol nd
    ip route 0.0.0.0 0.0.0.0 194.12.0.221
    ip http server
    ip http authentication local
    no ip http secure-server
    ip nat inside source list 1 interface FastEthernet0/0 overload
    access-list 1 permit 192.168.1.0 0.0.0.255
    access-list 1 permit 10.10.10.0 0.0.0.255
    tftp-server flash:P003-8-12-00.bin
    tftp-server flash:P003-8-12-00.sbn
    tftp-server flash:P0S3-8-12-00.loads
    tftp-server flash:P0S3-8-12-00.sb2
    tftp-server flash:P003-8-12-00
    tftp-server flash:P003-8-12-00.loads
    tftp-server flash:P003-8-12-00.sb2
    tftp-server flash:SIP000F902B40E0.cnf.xml
    control-plane
    mgcp behavior g729-variants static-pt
    dial-peer cor custom
    dial-peer voice 1 voip
    description IncomingSIP
    translation-profile incoming IncomingSIP
    voice-class codec 1
    session protocol sipv2
    session target sip-server
    incoming called-number .T
    dtmf-relay sip-notify rtp-nte
    no vad
    dial-peer voice 2 voip
    description Outgoing Geographic
    translation-profile outgoing Translatetrunk
    destination-pattern 0[7]........
    voice-class codec 1
    session protocol sipv2
    session target dns:sip.cloudcalling.co.uk
    dtmf-relay rtp-nte
    no vad
    sip-ua
    credentials username 4143*002 password 7 password realm sip.cloudcalling.co.uk
    authentication username 4143*002 password 7 password
    nat symmetric role passive
    nat symmetric check-media-src
    calling-info sip-to-pstn number set 4143*002
    no remote-party-id
    retry invite 3
    retry register 3
    timers connect 100
    registrar dns:sip.cloudcalling.co.uk expires 60
    sip-server dns:sip.cloudcalling.co.uk
      host-registrar
    gatekeeper
    shutdown
    telephony-service
    load 7960-7940 P0S3-8-12-00
    max-ephones 24
    max-dn 30
    ip source-address 192.168.1.1 port 2000
    max-conferences 8 gain -6
    web admin system name Admin secret 5 $1$Fktw$t9GQkdDdHmoYdwptO8.or.
    transfer-system full-consult
    create cnf-files version-stamp 7960 Dec 17 2013 14:35:13
    line con 0
    line aux 0
    line vty 0 4
    login
    scheduler allocate 20000 1000
    ntp server 85.119.80.232
    end
    Router#

  • How to recover an incoming call that has being deleted?

    I need to recover an incomming call that I have deleted from my iPhone. How do I do that?

    Yes that is what they mean usually they have a quick online setup for mobile payments which you can use to login or you can write down the date from when the call was placed wait for you monthly bill and look for calls on that date and bingo you have your number but the only clear way to get such information is your carrier their is no other way in the sinario you have prosented us with.

Maybe you are looking for

  • HT1725 My issue lies with iTunes for OS 6.0.1

    If you are using a screen reader, you may wish to switch to basic HTML for a better experience. <style> #loading {display:none} </style> <font face=arial>JavaScript must be enabled in order for you to use Gmail in standard view. However, it seems Jav

  • AIR iOS Framework Linking issues

    Hi everyone. I have an issue with running my app on older version of iOS (specifically iOS 4.x). It runs perfectly fine on iOS 5.x but crashes instantly when it launches on iOS 4.x. I have narrowed it down to how the iOS frameworks are linked. Every

  • HT4113 can you please help with my ipod i fogot my passowrd and can unlook

    i need help to open my ipod

  • CS4 for Portraits? Whats new?

    Hey everyone, This may have been touched on in another topic but probably not as specific as I need. Can anyone tell me what benefits(specifically, new features, updated features) are there for a portrait studio to upgrade from Photoshop CS3 to CS4?

  • Table MBEW  Field HKMAT - Impact on variances

    Can anyone tell me the impact of having the box called "Material Origin" checked or unchecked when variances are calculated?  The check box appears to update the value in Table MBEW  Field HKMAT.  We have already set standard costs for the year, but