In BB World- "... problems completing purchase... select different.. (AW1006c)

I cannot purchase anything in Blackberry World. Consistently get message to try different payment method whether PayPal, Visa or Carrier. Account info is correct. Anyone know error message AW1006c?
This may be related to an erlier problem when I was charged twice on PayPal for SayIt. I requested refund for one of them from PP. Since then I can neither download SayIt or purchase it again. On B B World SayIt shown download as if I own it. When that is tapped it tells me that i must purchae the App. But I cannot now purchase anything. I have received other updates recently such as Bloomberg update yesterday. [Q10 -100-5 OS v10.1.0.4651 ATT}. Any help mwould be appreciated.

Hi Gpedwareds
Welcome to http://supportforums.blackberry.com
I suggest updating to the latest official version 10.2.0.424
Whether via BlackBerry Link, or if your operator to release.
The problem with this can be caused by a failure of the BlackBerry World.
I suggest clearing the cache of BlackBerry World
Enter BbWorld
Slide your finger from the top down
Enter settings
Then where it says General
And press Refresh BlackBerry World
And proceeds to execute the application after a few seconds.
If your refund is visit this link
https://consumersupport.webapps.blackberry.com/blackberrycommerce/main?ln=us
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Similar Messages

This purchase could not be completed please select a different payment method

I`ve bought a new BB as a present to my wife - Z3.
I`ve registered for her new BB ID account - **Removed**@dunaeva.su
And we can not purchase anything having the same problem using all of our cards - "this purchase could not be completed please select a different payment method",
I`ve read a lot of forums and web pages and belive that our problem - ur sistem has flagged her account as potentially Fraudulent or Blocked.
U shold unblock her and bring ur appoligise.
Edit: Email removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

I apologize for the rudeness of my first post - i was really disappointed with the situation when i`m not able to provide to my wife fully equipped phone with all her contacts and sms (need some paid app). I`ll check up your recommendations and come back with a report or new questions.

Problem in selecting different drives while DB installation in Cluster.

Hello,
We are installing ECC 6.0 (AS ABAP), MS SQL 2005, Windows 2003 SR2, MSCS Cluster (One cluster, two nodes, Active/Passive)
Directory Structure
Drive / Cls Group / Used for
C: Local Disk
D: Local Disk
E: (SAN) SAPDBGRP     MSSQL
F: (SAN) SAP PRD                     SAP Global files
G: (SAN) SAPDBGRP     Datafiles
H: (SAN) SAPDBGRP     Transaction log files
Q: (SAN) MSDTC          Quorum Resource
- installed windows and MSCS cluster. Tested successfully.
- installed SQL Server 2005 database server software (installed on both the nodes)
     - Server software installed by default in C:\program files\...
     - In parameter window "Cluster Group Selection"
       provided parameter value as "Data Files = E:\Microsoft SQL Server\"
       (for Data file for master, model and msdb)
- installed Central Services Instance for ABAP (ASCS) on First Node
- Configured he First MSCS Node (where it created the SAP cluster group)
- Installing the Database Instance (Resources in SAPDBGRP cluster are E: G: H: drives)
     - Parameter Window "MS SQL Server > Database Files"
     - Path for Datafiles - Default E: Changed to G:
     - Path for Tran log - Default E: Changed to H:
If default E: drive is selected, goes to next step
If changed to G: or H: drive, error message comes <b>"Caught EKdException in Modulecell: no Element found"</b>
Installation Log File (last 8 to 10 statements are displayed hear)
=========================================================
INFO 2007-04-06 17:25:57
Execute step dAskForFilesConfig of component
|NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|8|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB
|ind|ind|ind|ind|2|0|MssDbLayout|ind|ind|ind|ind|3|0.
ERROR 2007-04-06 17:26:44
FKD-00037 Query did not return a result.
ERROR 2007-04-06 17:26:44
FKD-00038 Query did not return a result.Select attribute NeededSpace, statement: WHERE Name = 'G'
ERROR 2007-04-06 17:26:55
FKD-00037 Query did not return a result.
ERROR 2007-04-06 17:26:55
FKD-00038 Query did not return a result.Select attribute NeededSpace, statement: WHERE Name = 'G'
ERROR 2007-04-06 18:02:29
FKD-00037 Query did not return a result.
ERROR 2007-04-06 18:02:29
FKD-00038 Query did not return a result.Select attribute NeededSpace, statement: WHERE Name = 'H'
ERROR 2007-04-06 18:02:37
FKD-00037 Query did not return a result.
==========================================================
Please guide.
Ghanshyam
Hello,
Problem solved, G: & H: were added to the SQL Server resources dependency.
Thanks for everybody's help.
Message was edited by:
        Basis Team

Hi,
My problem of Drive selection got solved after I put drives (E,F,G) in db cluster group.
I did not face any problem which you have mentioned. Following are the cluster related parameters required while installation, (other than the normal parameters)
Installation Steps (MSCS Cluster,One Cluster, Active-Passive)
SQL Server S/w Installation
Automatically installs on Both the Nodes.
Database Instance
Before starting DB instance, check SQL Server for Disk Recources
Manually add the disk G: & H: to Resources Type to SQL Server if not available Check Dependencies
     in SQL Server resource: E:, G:, H:
     Profile directory     :
SAPCIGRP\sapmnt\prd\sys\profile
     Local MSSQL Server     : sqlcluster
     Path for Datafiles     : G:
     Path for Logfiles     : H:
     TempDB drive     : E:
Configure the MSCS Node-B
Move resources to Node-B
     Instance Type     : AS ABAP
     SAPSID          : PRD
     Instance Number     : 00
     Virtual Host Name     : SAPCIGRP
     Support of multiple SAP : No
Enqueue Replication Server Node-A
     SAPSID          : PRD
     Instance Number     : 00
     Virtual Host Name     : SAPCIGRP
     ER Instance Number     : 10
     ER Drive          : D:
Enqueue Replication Server Node-B
Move resources to Node-B
     SAPSID          : PRD
     Instance Number     : 00
     Virtual Host Name     : SAPCIGRP
     ER Instance Number     : 10
     ER Drive          : D:
Central Instance on Node-A
Move resources to Node-A
Check the permissions of SAPMNT share
     Profile directory     :
SAPCIGRP\sapmnt\prd\sys\profile
     Central Instance Number : 01
     Host Transport Dir     : SAPCIGRP
     DDIC password different : No
     SOLMAN Key     : XXXXXXXXXXXX
Dialog Instance on Node-B
Move resources to Node-B
     Profile directory     :
SAPCIGRP\sapmnt\prd\sys\profile
     Central Instance Number : 01
Other are regular parameters which you provide for standard installation. I could successfully install SAP in MSCS cluster.
<b>IMP: You Must upgrade your kernel to DW105, or your failover / failback will not work.</b>
Ghanshyam

Cannot complete purchases today..is anyone else having this problem?

I can't complete purchases from any of my computers, but can access the store and browse...

I'm having the similar issues as well. I got the same error message when trying to download a few app updates. Also, I went to sync my iPhone and it said my MBP was not authorized, and that if I didn't authorize it all the apps on my phone would be deleted. That's ridiculous because I've synced it several times this week. When I tried to reauthorize my computer, it said that the request couldn't be completed at this time.
It's probably a bug on Apple's end, and a very inconvenient bug at that, but I'm sure they'll have it up and running again soon. It would be great on their part, however, to acknowledge the problem publicly and say that they're working on a solution.

Genius could not complete purchase in store

I went into the local Apple store (Frisco, TX) today to pick up a 128GB iPhone 6. Waited in line about 30 minutes.
Was assigned Shane to work with. Everything goes smoothly. Verifies account, etc. However, he was unable to select my data plan when processing the order (I have a 40GB family share plan on AT&T). He just looked at me and said, "it's not on here". No attempt to trouble shoot anything. He asked if I wanted to select one of the other data plans listed on his device (all individual plans). Not a solution because I don't know what that would have done to my family share plan (this is the main number on the plan).
I expected a little more effort on his part to figure out how to get the purchase completed. I love Apple but come on. A little attempt to problem solve would be nice. Maybe refer me to the genius bar or something. Instead I got a big "see you later".
Anybody else have problems completing a purchase on an AT&T device?? I guess I can wait until AT&T has some phones in stock and go get it there.

Hi Niel!
Please also help.
Mine has the following specifications:
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook2,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          4 GB
Bus Speed:          667 MHz
Boot ROM Version:          MB21.00A5.B07
SMC Version (system):          1.13f3
Serial Number (system):          4H648YJ2WGK
Hardware UUID:          00000000-0000-1000-8000-0017F2F21E3D
Sudden Motion Sensor:
State:          Enabled
Is this compatible with Mountain Lion?
Please advise.
Thanks!
Erson

App download frozen at "completing purchase".

App download frozen at "completing purchase". PayPal has confirmed the transaction. App World has my $ and I have no product. How can I speak with someone from app world to resolve this issue and get my $ back?

Hello,
I had the same problem.
I disputed the payment and got it back.

Cant select different pages on some sites

on some sites i can only view page 1. i try and select next page or the page number itself and still stuck on page 1. i use my wifes laptop and go to the same sittes and i have no problems at all. any help is appreciated.
Solved!
Go to Solution.

Hi ! And you still have not followed Jerry's advice. Can you not read?? Jerry said to reset Internet Explorer. He even provided you with the link explaining how to do it. Also you have not said if the problem happens on a different browser. Try Firefox.
Dokie!
http://support.microsoft.com/kb/923737
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

Depending on which European country (should their mains access plug/port shape vary) the
cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
where the factory cord goes, and the other end has one for the wall source shape. The wire
for the application should be able to support 110~240VAC.
With the cord or an accurate image in hand, you could either get a new cable to match both
realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
the head or input part of the original Apple cable. One plugs into the other, then into wall.
If you have a new Mini with a small modular plug/port on the computer end of the power wire,
it would have only two holes and no ground; the other end would have two prongs of equal
shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
power wire for the MINI to go from power source to the Mini is recommended, if you are going
to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
the physical shape adapter kit, should a available in travel stores, airports; big box discount
stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
The other end would be the mains shape for whichever country you are going to....
http://www.signalandpower.com/European-Power-Cords/
So to match the country or regional power mains type is a primary concern for obtaining the
correct replacement cord to supply the Mini with local mains power. The end which plugs into
the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
& the end that gets plugged into the mains or utility side, needs to match the local specification.
The link to Apple, to contact for Support and Service information in prior post, should be able
to help find a source for the local replacement type cord they'd sell local people with a Mini.
Apple local sources offer replacements for this purpose; and for travelers, a second cord for
a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
Even places where the power itself may be somewhat similar. However your MINI has an
automatic power supply that will conform to that energy standard, you only need to supply a
correct non-transforming adapter. Simply a connection to adapt one shape to another.
The general purpose travel kit that is not specialized to Apple power adapters, would have a
plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
So, no circuitry nor any other change of electrical power inside this device would be required.
http://www.signalandpower.com/2-Prong-Plug-Adapters/
http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
http://www.signalandpower.com/Swiss-AC-Power-Cords/
In other words, I believe my other post already covered this. On the ground on either end of the
path, adapters are common and the Mini does not use proprietary electrical components IF you
have one of the more recent shape aluminum models with the power supply built in. The older
Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
Their shapes of plug are different, so the adapter end for local supply has to match their standard.
Swiss, Denmark, UK, and others offer different shapes and so on.
The Apple store in the location you are traveling should be able to supply you with a replacement
cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
the opposite. Since the unit is automatically switching, the magic is done.
Since I supplied a means to locate any number of Apple stores, authorized service providers &
other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
any of them along your route in the City in whichever EU country, to find a local MINI power cable.
In any event, I'm done...
Good luck and happy trails...

Problem in Purchase Requisition Creation

Dear Experts:
We are facing a problem while purchase requisition creation. We have created an Internal order No. 600406 and an Asset in Company Code AB01 but while creation of Purchase Requisition level when we are selection that Order and Asset in Purchase Requisition system automatically changing my Order no. 600020 instead of 600406. I've checked OKB9 where Order no. maintained as 600020 against Company code AB01 which I deleted and save but after that Purchase requisition asking for Order Number that means we have to maintain Order number in OKB9. Now can you please advise how can we get my current order number in requisition instead of any default number.
Thanks in advance and your kind suggestion is highly appreciated.
Best Regards.
Ripon Kumar Paul

Please find attached screen shots of OME9

Problem in purchase requisition release strategy code

Hi
We are facing a problem in purchase requisition, a new release strategy was created and change request transported but when PR is displayed in release strategy chart a same user is showed in different release strategy code.
Note: new strategy was copied from other.
Thanks in advance.

hi,
As you said tht you have copied the release stategy n created the new one...
If you do so, you would have copied the class also...to which the release group is attached...
If this is the case, then system doesn't recognise the new one, and inorder to solve it you have to define the new characteristic and class...then assign this class to the release group and make your release strategy again...
Once you do this check the release strategy at OMGSCK...and then try at PR...
You do all settings at :
SPRO >> IMG>> MM >> Purchasing >> PR >> define release strategy >> W/o classification >> here edit characteristics/class and all other link are provided...
Regards
Priyanka.P

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: Sy

Lightroom trial doesn't show complete menu selections or import button. Also get error message on launch: An error occurred when attempting to change modules. I am unable to find/see the following file to try renaming the SLCache and SLStore files: System Library/Application Support/Adobe. Any ideas? I only have 16 days left on the trial and have been unable to get it to work on my Macbook Pro. This is all I am seeing after Lightroom opens. Thanks!

Thanks to both of you for attempting to help. I finally figured out what was wrong . . . it was a Permissions problem. Very frustrating, but after scouring the troubleshooting tips I finally found the one that solved my problem. I had to add a User and give it Read/Write privileges to Lightroom. The file I had to add the User to was Hidden on my Mac, so that added an even bigger challenge to the mystery. Only a few days left on my trial version! I hope I have time to try it out!

Problem in displaying selected page items in the title in Graph

Hi There;
I have a problem in displaying selected value of named page item in the graphs.
Eg. I have in my worksheet a page item named "Location"; when I use "&WorksheetName &Location" in the title of worksheet it is displaying both the worksheet title and value of selected page item "Location" in my example.
But when I use the same (&WorksheetName &Location) in the title of graph or Axis of the graph, it would show up only the name of the worksheet but not the value of page item "Location", instead it would print "&Location"
Any idea why it is not able to reference the select page item in Discoverer graph? I am using Oracle BI Discoverer 10.1.2.1.
Thanks in Advance,
Regards,
Nidhi Jethoo

Hi Michael;
Thanks a lot. It might not have been considered necessary but you do require, e.g in my case I am plotting Average value of a Parameter and it does make sense in including the name/value of Parameter(surface water temp/bottom watter temp) as an Axis instead of just a constant Parameter or say Average Parameter. So that user can plot the variation of different parameters by changing the page items and when user changes the value of parameter and export the graph he/she has the parameter name(actual value) in the graph.
But I can include all the parameters (&Parameters) or all the page items(using &PageItems) in graph then why not individual page-item and individual parameter.
I would log a SR and see what they say.
Thanks again,
Nidhi

Why is the itunes store selection different on my mac and apple tv?

Why is the itunes store selection different on my mac and apple tv. when i browse the documenteries on my apple tv, i can purchase/rent only 3. when i look on the itunes store on my mac, there's a whole page of docs to select from.

"ah, so It's really up to the artists/ Distributions people that decide what can be published or sold? "
Yes.

Digital clock which randomly selects different colors from Applet

Hi,
I relatively new to java, what I'm trying to do is list about five colours in my Applet and pass the colours into my java code, and maybe the font.....
I want to be able to Display a digital clock which randomly selects different colours which were passed from my Applet
Thanks for any help
Zip
Clock Code:
import java.awt.*;
import java.applet.*;
import java.util.*;
import java.text.*;
public class dclock extends Applet implements Runnable{
Thread animThread = null;
int delay = 1000;
public void init(){}
public void paint (Graphics g){
// get the time
Calendar cal = Calendar.getInstance();
Date date = cal.getTime();
// format it and display it
DateFormat dateFormatter =DateFormat.getTimeInstance();
g.drawString(dateFormatter.format(date), 5, 10);
public void start(){
if(animThread == null){
animThread = new Thread(this,"Animation");
animThread.start();
public void stop(){animThread = null;}
public void run(){
while(animThread !=null){
try{ Thread.sleep(delay);}
catch(InterruptedException e){};
repaint();
//sec++;
}

Why doesn't the clock just decide what colour it is going to be? If you need to pass the colour choices in, just let the clock accept a collection of colours in its constructor or something. I don't understand what bit of this you are having problems with as you haven't really explained. Please also use code tags.

Problems with purchased items, Problems with purchased items

I have problems with my purchased itens displayed in iPhone.
When I access "iTunes > Purchased" (on iPhone) it does not show one of the albums that I purchased. When i acess "Purchased items" in iTunes (MacBook) this album is showed.
because of this I purchased two times the same album.
How to solve this?

I just called the 1-800-My-Apple and the said there is really nothing they can do about it. They said I had an outstanding payment of $8.54 (or something like that), I said I know b/c of the problem I am having with my bank, but NO previous completed purchases should have anything to do with this outstanding payment . It should not keep me from being able to update or download previously completely paid apps, TV Shows, or movies - they are mine, and I paid for them. I submitted a complaint.. that just isn't right!

In BB World- "... problems completing purchase..​. select different.​. (AW1006c)

Similar Messages

Maybe you are looking for

In BB World- "... problems completing purchase... select different.. (AW1006c)