In BEx analyzer, i am unable to see report's name

Hi,
While using BEx Analyzer, i have 2 users. If i am logging into one user it is showing me the properties as Charts, Filter and Report name. But from other user i am not getting anything. Can anyone help me so that i will be able to see the properties as well as Report name in my another user as well.
Roma

Simple First user have have required authorization and Roles to see the report.
Where second User not have required authorization and Roles to see the report.
So discuss with your System Manager in case to provide necessory Authorization and Roles to Second User , If say yes Then escalate this issue to BASIS team.
Regards,
Sushant

Similar Messages

Unable to see report

Hi
I had one strange issue.Willbe greatful for some inputs.
User is using one report.He sees report in .NET application which fetches data from BW.The report is based on one BW query.
In BW query,we are using one characteristic SALES_ORG which has hierarchy SALES_HIER_2000 activated on it.User belongs to node 5000 in this hierarchy.We have a hierarchy node variable on this characteristic in Global filter area.This variable has a default value of 100 which is higher level node in SALES_HIER_2000 hierarchy.so when ever query is run,the variable is input with this top level node.But I think our user roles are built in a way,that users can see only their hierarchy nodes data.In our users case,he can see only 5000 hierarchy node data to which he belongs.
Then the hierarchy is changed to SALES_HIER_3000.My user now belongs to hierarchy node 8000 in this new hierarchy.So this new node 8000 is included in his role so he can continue seeing reports.Just to make a point here,this 8000 node also comes under higher level node 100 in new hierarchy as in old hierarchy.But the problem is,he is unable to see reports.
I noticed that in our query we are still using same hierarchy node variable.Do I need to create one new hierarchy node variable as we are using new hierarchy eventhough both old and new hierarchies are on same characteristic SALES_ORG.
Also,I noticed that in this old variable which we are still using,we have default value 100 from old hierarchy.Do I need to change this default value eventhough in new hierarchy also,100 is the higher node to which new user's node 8000 belongs to?..........
what can be the reason that my user is unable to see reports?Please advise.
Best Rgds.

Perhaps I was not clear in my original help message. When the report is run from within report builder, there is no footer in the report. However, when the same is run from the application, one footer is printed. How to change this footer is the problem.

Unable to see report in pdf format in BI Publisher 10.1.3.2

Hi
I am new to BIP and I am facing problem to display pdf format in BI Publisher 10.1.3.2.
Here is my my generated by 10g Report Developer.
<?xml version="1.0" encoding="WINDOWS-1256"?>

<NEHAS_GA>
<LIST_G_2>
<G_2>
<DNAME>ACCOUNTING</DNAME>
<LOC>NEW YORK</LOC>
<LIST_G_1>
<G_1>
<NAME>CLARK</NAME>
<JOB>MANAGER</JOB>
<HIREDATE>09/06/81</HIREDATE>
<SALARY>2450</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>KING</NAME>
<JOB>PRESIDENT</JOB>
<HIREDATE>17/11/81</HIREDATE>
<SALARY>5000</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>MILLER</NAME>
<JOB>CLERK</JOB>
<HIREDATE>23/01/82</HIREDATE>
<SALARY>1300</SALARY>
<COMM></COMM>
</G_1>
</LIST_G_1>
</G_2>
<G_2>
<DNAME>RESEARCH</DNAME>
<LOC>DALLAS</LOC>
<LIST_G_1>
<G_1>
<NAME>JONES</NAME>
<JOB>MANAGER</JOB>
<HIREDATE>02/04/81</HIREDATE>
<SALARY>2975</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>FORD</NAME>
<JOB>ANALYST</JOB>
<HIREDATE>03/12/81</HIREDATE>
<SALARY>3000</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>ADAMS</NAME>
<JOB>CLERK</JOB>
<HIREDATE>12/01/83</HIREDATE>
<SALARY>1100</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>SMITH</NAME>
<JOB>CLERK</JOB>
<HIREDATE>17/12/80</HIREDATE>
<SALARY>800</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>SCOTT</NAME>
<JOB>ANALYST</JOB>
<HIREDATE>09/12/82</HIREDATE>
<SALARY>3000</SALARY>
<COMM></COMM>
</G_1>
</LIST_G_1>
</G_2>
<G_2>
<DNAME>SALES</DNAME>
<LOC>CHICAGO</LOC>
<LIST_G_1>
<G_1>
<NAME>WARD</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>22/02/81</HIREDATE>
<SALARY>1250</SALARY>
<COMM>500</COMM>
</G_1>
<G_1>
<NAME>TURNER</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>08/09/81</HIREDATE>
<SALARY>1500</SALARY>
<COMM>0</COMM>
</G_1>
<G_1>
<NAME>ALLEN</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>20/02/81</HIREDATE>
<SALARY>1600</SALARY>
<COMM>300</COMM>
</G_1>
<G_1>
<NAME>JAMES</NAME>
<JOB>CLERK</JOB>
<HIREDATE>03/12/81</HIREDATE>
<SALARY>950</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>BLAKE</NAME>
<JOB>MANAGER</JOB>
<HIREDATE>01/05/81</HIREDATE>
<SALARY>2850</SALARY>
<COMM></COMM>
</G_1>
<G_1>
<NAME>MARTIN</NAME>
<JOB>SALESMAN</JOB>
<HIREDATE>28/09/81</HIREDATE>
<SALARY>1250</SALARY>
<COMM>1400</COMM>
</G_1>
</LIST_G_1>
</G_2>
</LIST_G_2>
</NEHAS_GA>
Please see nehas_ga.rtf, kindly provide the solution which I have been working since last week and still unable to get solution.
for-each G_2
DNAME
LOC
Name Job Hiredate Salary Comm
for-each G_1 NAME
JOB
HIREDATE
SALARY
COMM end G_1
end G_2
I want each department should print on seperate page but no page to display in BI Publisher. In MS Word showing 3 page using with nehas_ga.rtf.
I would appreciate if anyone reply me.
Thanks and Regards
Muhammad Nehas

Hi
Even if i use a new clean blank rtf doc as the template, it still doesnt write out a file.
When i look in the log directory at the .out files produced, they look right. If i open the .out file with Adobe Reader 9.1, the doc looks exactly as it should. It just doesn't write the file to the destination folder specified.
It cannot be permissions as it will write out RTF/excel files to the same directory with no problems. The report is using a bursting definition but the problem cant be that because it bursts the data correctly, as shown if i specify rtf output in the bursting definition/as shown by the .out files when i specify pdf as the output in the bursting definition. Also, i get the same result even if i schedule any other report that does not use a bursting definition.
I do get an error sometimes when i try to open pdf reports : Cannot use Adobe Reader to view PDF in your web browser. I feel somehow that this may be related and that if i fix this, i could be sorted, but im not even sure im on the right track here.
Im really really REALLY at wits' end here, ive been trying to solve for weeks, but just cant figure it out. Any further ideas would be most welcome, thanks.

Unable to see report footer

I am using forms and reports 6i. In the application (web enabled),in a few reports, one report footer is printed. however, in the report builder, this report footer is not visible. I want to change the footer. How to do this? Pl. help.
Thanks

Perhaps I was not clear in my original help message. When the report is run from within report builder, there is no footer in the report. However, when the same is run from the application, one footer is printed. How to change this footer is the problem.

Unable to switch to Design Mode in Bex Analyzer

Hello,
I am trying to switch to Design mode in Bex Analyzer and am unable to do it. I opened a query. I see the Design mode toolbar but it is inactive, meaning greyed out. How do I make it active. I am using 3.5 version.
Vidya

Vidya,
I've seen this happen in two instances:
1. When someone else has the same query open and you can only open it in Query Designer in Read mode
2. When you don't have authorizations to change the query.
In both instances you should be promoted about Read Mode when you go into the query designer.
Regards
Gill

Command in Bex-Analyzer

Dear BI fans,
We are now playing with the Bex-Analyzer and we try to see how much we can do to make our reports as user friendly as possible.
To do this we would like to define some buttons to trigger some commands/ commands sequences².
We have been able to use the commands that the command wizard offers in the Bex-analyzer but by checking the documentation we saw that it should be possible to use all the Dataprovider specific commands available in the Web API (http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm).
We tried many of them like DRILL_DOWN, REMOVE_DRILL_DOWN but without any success... We probably make some error in the syntax..
Does anybody have an example of such command working in the Bex-Analyzer?
Any help would be appreciate
Best regards,
Rodolphe

Dear srikant,
Many thanks for the info... But we had already that document - anything about other commands? Like DRILL_DOWN, REMOVE_DRILL_DOWN, SET_SELECTION_STATE...
Best regards,
Rodolphe

BEx analyzer hangs

Hi All,
We are experiencing error, when we execute the Sales Report in BEx analyzer.
We have a sales report which extract data for 3 regions US, ASIA, EUROPE.
We tried to execute the sales data extract query for one month ( eg. May 2008) and for all 3 region. After 10 to 15 min Bex analyzer gave error message that " Critical Pgm error occurred"
Then we tried to execute the report for one month ( eg. May 2008) and for particular Region ( Asia , US, EUROPE).And we are able to get the result within 10 min
The amount of data for particular month ( May 2008) is as follows:
No Of Rows File Size
US: 4500 10.6 MB
ASIA: 8000 20.4MB
EUROPE: 3500 7.3MB
We executed the same report in server class machine ( it has 4 GB RAM) without region criteria, (For all regions) we got result with in 5 min.Size of that file is 37 MB and it has around 16K rows .
Our local machine has 1 GB RAM and office 2003.
We are having following configurations:
EP 7.0/SPS14
BI 7.0/SP16
Please brief on limitations if any of BEx analyzer.
regards
Preethish

Hello Preetish,
i dnt think this is any thing with version of bex analyser as we faced the same problem in our office what you need to do is the performance tuning or break the data in to according to regions based on months and also i think you got limited tablespace(Memory) resources.If possible increase it.The only solution you can do it immeadiately is break the amount of data retreving based on region and month.
Assigning points = Thanks in SDN.
Thanks & Regards
Jai

Bex Analyzer Amount not correct

Hi ,
I am facing an issue with Bex Analyzer. When I run a report from Query Designer on the web , the amount key figures displays as $772.97
However in Analyzer ,same amount displays as 0.00000773 . I
Any ideas?
HD

Hi
looks like a scaling error. Do have any scaling relevant settings or is this done in the webtemplate (mutliplied by some factor) ?
Regards
Jürgen

View Business Explorer Analyzer (BEx Analyzer) queries in NWBC?

Hiya,
The business would really like to view their BW report via NWBC.
Currently they are using Business Explorer Analyzer (BEx Analyzer) - this is the analysis and reporting tool that is embedded in Microsoft Excel.
IS there any way that NWBC can connect to this?
Or would a different approach be needed for making BW queries in NWBC?
Thanks in advance!

Yes, by web enabling them. The latest and coolest solution available is connecting Lumira to the BEx query. There are many other options such as WAD, Xcelsius, Crystal Reports, etc. You should take this discussion to the relevant space (BEx, Business Objects, BI, etc).

Unable to get the employee name in performance Management

Hi All,
I am facing problem with Performance Management in My Employment. Unable to see the employee name in PM docs to approve by manager.But same user is able to see in Backend under manager who has to be approve..Please assist to go further. Is there anything need to be done from portal side.?
Thanks & Regards,
Kumar. V.

Hello Sainth,
In Webi Prompts..you can see the "Key icon" click on that icon..it will show both text and key..it will helps you to run the report based on the Key..
Regards,
Naveen D

Unable to open Query in Bex Analyzer

Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.

Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek

Unable to see ODS Object in BEx.

Hi all,
I am unable to see an ODS object in BEx, which is an active ODS Object with data in modelling.
Can any one show me a way out, how to find this ODS object in BEx as well.
Thanks in advance,
Regards.

Hi Robert Zovic
Thanks for your answer,
When I switced on th same..following is the eror message:
The BEx Reporting was switched on for ODS object 0RPM_DS02 ---> long text
Message no. RSDODSO157
System response
When activating ODS object 0RPM_DS02 SIDs have to be got for all characteristic values in the ODS tables, provided that these characteristic values are not already assigned any SIDs. This is required because the SIDs are used in BEx Reporting.
The activation of ODS object 0RPM_DS02 can thus take a while longer.
Procedure
If the activation of ODS object 0RPM_DS02 terminates due to timeout you have to activate the ODS object with the program RSDG_ODSO_ACTIVATE in the background.
I'm working on this, is there any other way out for the
same.
Thanks.
Regards.

Unable to Upload data from text file into BEx Analyzer selection screen

Hi,
No response from BEx Analyzer when I am trying to upload around 40,000 material from text file into BEx Analyzer selection screen using "Upload selections" options. But I am able to upload only 10,000 material from text file. I never faced same kind of issue when I am using BEx Analyzer 3.x. Please let me know I have to change any settings related to BEx or any other.
Thanks
Sri Krishna Ponnada.

Hello
It seems you are reaching the .NET memory limitation informed in note 1040454.
Because 3.5 does not use .NET it can work that.
Regards,
Ricardo

Unable to access query in Bex Analyzer

Dear All,
Could you please help us as we are getting No authorization error in Bex Analyzer when we are trying to view the query. We can access the query in RSRT using USERID for Execute as others. When we try the same query and with same userID in Bex Analyzer we are getting the error No authorization. We are on BI 7.3. Please let me know in case you need more information
Thanks and Regards,
Jyoti Arya

Hi,
please get required approrvals from client or business team.
Later seek basis or security team help to get required authorizations.
Thanks

NW2004s Sneak Preview - Unable to logon using BEx Analyzer or WAD

We have installed SAPNW2004s Sneak Preview Full ABAP Edition (with Web Dynpro for ABAP!) with the GUI recommneded on SDN download page.
SAP Frontend Package 6.40 Final Compilation 3
=============================================
SAP Frontend Package 6.40 Final Compilation 3 for Win32
Product Version   Release State    Patchlevel
GUI      6.40      Final           8
SCM      4.0        Final           1
BW       3.5       Final           3
KW       7.0       Final              0
I can log on to Client 001 and access BI, but on trying to access using the BEx Analyzer and Web Application Designer, I get a error message saying the "User or password is not correct (Repeat Logon).
I have already provided all relevant authorization to the user I am using to logon to BEx. My Opersting system is Windows XP Professional SP1
However, if I use the RRMX transaction (using the old GUI)
SAP Frontend Package 6.20 Final Compilation 4
=============================================
SAP Frontend Package 6.20 Final Compilation 4 for Win32
Product Version   Release State    Patchlevel
GUI      6.20      Final          32
APO      3.0A      Final          19
BW       3.0B      Final           7
KW       5.2       Final              4
SEM      3.5       Final              0
I can log onto BEx anlyzer. Your help in resolving the problem would be highly appreciated.

Roger,
When installating the Comp 4 GUI make sure you have selected the BI 7.00 Add-on. There you will also find BW 3.5. For the time being just select BI 7.00 Add-on. The Patch will only update the files if they are already exisiting (installed).
Only ensure that the user has following roles assigned:
SAP_BW_ALL
SAP_BW_ANZEIGER
SAP_BW_AWTEST
SAP_BW_DEVELOPER
SAP_BW_SEM_BPS_APPLICATIONS
SAP_BW_SEM_LP
and Profiles:
SAP_ALL
SAP_NEW
S_A.SYSTEM
S_RS_ALL
RS_RS_EXPL_A
Plus a Z_BI_ROLE (having ALL authroization for below objects)
Z_BI_ALL                            All BI Authorizations
5       Manually   Cross-application Authorization Objects                      AAAB
        4          Manually   Authorization Check for RFC Access                           S_RFC
                                                              5       Manually   Basis - Development Environment                              BC_C
4          Manually   ABAP Workbench                                               S_DEVELOP
                                                              5       Manually   Business Information Warehouse                               RS
        4          Manually   Infrastructure of the Analysis Authorizations                S_RSEC
        4          Manually   Data Warehousing Workbench - Objects                         S_RS_ADMWB
        4          Manually   BI Analysis Authorizations in Role                           S_RS_AUTH
        4          Manually   Business Explorer - BEx Web Templates (NW 7.0+)              S_RS_BTMP
        4          Manually   Data Warehousing Workbench - InfoSource (Flexible Update)    S_RS_ISOUR
        4          Manually   Data Warehousing Workbench - Open Hub Destination            S_RS_OHDST
        4          Manually   Data Warehousing Workbench - Process Chains                  S_RS_PC
        4          Manually   Business Explorer - Individual Tools                         S_RS_TOOLS

In BEx analyzer, i am unable to see report's name

Similar Messages

Maybe you are looking for