IN BI 7.0 , Iam not getting the datasources

Hi gurus,
I am finding specific problem, if any of you gone through this problem please guide me
i am new to Bi 7.0, recently we have installed ECC 6 with BI 7.0,
In rsa1 when i am checking the SS( source sys) there is only one self SS is there and not finding any other SS ,s like R/3 , FC,DB,..
When i am trying to create new SS for R/3, in status " no entry for BW_USER in table RSADMIN available'.
with the existing SS i replicated the DS(Datasources) but i unable to find any of the DS what is the problem, all steps related to R/3 is performed like RSA5 .RSA6 and also checked for RSA3 - every thong was OK
Please help me , early reply is appreciable
Thanks
ram kumar

Hi Ram,
Even though u've installed ECC and BI u've build a connection between them inorder to move data from ECC to BI 7.0 through RFC after giving the RFC then u need to create a SS in BI 7.0 sytem for R/3 for doing all these things u need to get SAP_ALL authorization.
First follow the steps to given by our frnd in the below answer to create RFC connection.
then got to RSA1 and create a SS by assigning the respective logical system names and passwords then after creating this SS u should select htis SS and replicate ur datasources..........
Hope it helps........
Regards
Madahvi

Similar Messages

  • Iam not getting the data on screen after using the user exit zxpadu01

    Dear Freinds
                As per my requirement when the user enters value Ansal  it should get defaulted to Amount field (bet01 ) based on the wage type
    i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default  on the screen for bet01 once i enter value for Ansal , please any body correct my code
    in   ZXPADU02 i have written the code as  below :
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
    CASE innnn-infty.
    when '0008'.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008  --- HERE I CAN SEE EVEN THE BET01 IS FILLED
    IMPORTING
    prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
    endif.
    when others.
    endcase.
    IN ZXPADU01 I HAVE WRITTEN AS BELOW:
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
    CASE innnn-infty.
    when '0008'.
    MOVE-CORRESPONDING  innnn to wa_p0008.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
    IMPORTING
    prelp = innnn.
    endif.
    when others.
    endcase.
    Now my problem is as follows :
                   i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
    and it should  display in bet01 as 10 ( q0008-bet01 =  p0008-ansal /100)
    but i dont find the value 10 being displayed for the field bet01 on the screen  when
    user enters Ansal  as 1000 .........even then i have saved it to test the scenario......
    now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same  dates .....where i created the record........i found that the value
    bet01 is there i.e i can see  the value bet01 as 10 ( my requiremnt here matching)
    but when the user say enter during the time of creation of the record the value
    bet01 is not getting defaulted with 10 .........why iam not able to understand
    PLEASE ANY BODY HELP ME IN THIS REGARD 
    regards
    shanti.

    Hi Pranesh,
                   i have used the logic which you hav given as below
    in ZXPADU02
      FIELD-SYMBOLS <fs>  TYPE ANY.
    ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
    if <fs> is assigned.
    <fs> = l_v_amount .  ---  amount as (ansal /100 i.e 1000/100 = 10) 10
    endif.
    still iam not getting the data for the field bet01
    this is the coding i am using
    data : wa_p0008 like p0008,
            i0008 like p0008,
           l_v_ANSAL type ANSAL_15,
           l_v_amount type PAD_AMT7S.
      FIELD-SYMBOLS <fs>  TYPE ANY.
    CASE innnn-infty.
    when '0008'.
    MOVE-CORRESPONDING  innnn to wa_p0008.
    CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
    prelp = innnn
    IMPORTING
    pnnnn = wa_p0008.
    if wa_p0008-lga01 = 'MFPY'.
    l_v_ansal =  wa_p0008-ansal.
    l_v_amount = l_v_ansal / 100.
    move l_v_amount to wa_p0008-bet01.
    ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
    if <fs> is assigned.
    <fs> = l_v_amount .
    endif.
    CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
    EXPORTING
    pnnnn = wa_p0008
    IMPORTING
    prelp = innnn.
    endif.
    when others.
    endcase.
    please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
    regards
    shanti.

  • Iam not getting the document in production order

    HI,
    Iam created a document (cad drawing)in CV01N and this document is assigned to BOM item category D.
    created production order  and released .here iam not getting the document overview in production order heade details.
    Any setting for document?give me solution

    Hi Naresh,
    You can view the dms documents at purchase order item level not in header. Hope this will resolve the query.
    Regards,
    Ravindra

  • Iam getting problem with Jfilechooser iam not getting networkneighbourhood

    Dear Sir,
    Iam doing a product for education portal for that we are using swing as frontend in that we are using Jfilechooser where ever we want but the problem is in filechooser iam getting the directories of the system(like C, D, E). But iam not getting the networkneighbourhood in that. Please any body can solve my problem i want to select networkneighbouhood. Ill be waiting for your reply.If apiece of code is there ill be very thankful.
    regards
    surya

    Unfortunately can't be done with JFileChooser, you would have to write your own version.
    See the bottom of this document
    http://java.sun.com/products/jfc/tsc/articles/merlin/windows/index.html
    Unfortunately the link that the text then leads you on to is broken.

  • Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

    iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
    still not getting this options please help
    Thanks
    Koushik

    13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
    The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
    http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
    Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
    http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
    If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

  • Iam not getting output for inner join where condition

    the condition i have give
    TYPES:BEGIN OF TY_TAB,
          WERKS TYPE WERKS_D,
          LGORT TYPE LGORT_D,
          LGOBE TYPE LGOBE,
          NAME1 TYPE NAME1,
          END OF TY_TAB.
    DATA WA_TAB TYPE TY_TAB.
    DATA IT_TAB TYPE TABLE OF TY_TAB.
    SELECT  T001L~WERKS
            T001L~LGORT
            T001L~LGOBE
            T001W~NAME1
            INTO TABLE IT_TAB FROM T001L INNER JOIN T001W ON T001LWERKS = T001WWERKS
           WHERE  T001L~WERKS = 'amjt' and
               T001L~WERKS = 'bimi' and
               T001L~WERKS = 'biml'.
    LOOP AT IT_TAB INTO WA_TAB.
      WRITE: / WA_TAB-WERKS,WA_TAB-LGORT,WA_TAB-LGOBE,WA_TAB-NAME1.
      ENDLOOP.
    iam not getting output for this

    Well, re-read carefully your code
    WHERE T001L~WERKS = 'amjt' and
    T001L~WERKS = 'bimi' and
    T001L~WERKS = 'biml'
    - WERKS cannot be simultaneously equal to three different values, replace AND with OR ([Boolean algebra|http://en.wikipedia.org/wiki/Boolean_algebra])
    - WERKS domain does not allow lowercase, so use uppercase ([Creating Domains|http://help.sap.com/saphelp_nw04s/helpdata/en/cf/21edf2446011d189700000e8322d00/frameset.htm])
    Regards,
    Raymond

  • Iam not getting loacal server home page in brosers.

    hellow sir,
    iam sridhar.I have some technical problem.I started Bea Weblogic version 8.0,Apache Tomcat version 5.0 success fully.But when iam giving url like"http://localhost:8080/manager/html" for tomcat, and url like "http://localhost:7001/console" for weblogic iam not getting servers home page.Iam getting message like"Page cannot be displayed" .
    I thought that there is a problem in the browser.That is why i reinstalled the browser.Iam currently using Internet Explorer 6.0 version.Even after reinstalling iam getting the same message.
    I tried in netscape navigator browser.Iam not getting there also.
    Iam using the Microsoft XP operating Systems.
    Where the problem is.Please give me the solution for this problem.
    Thanks & regards
    sridhar

    Please contact BEA and/or apache. There are forums for these types of issues. This is a Java forum.

  • Not getting the child details

    Hi Friends,
    Iam implementing a master detail page.
    Here I have taken two sequences...one(emp id sequence)  for emp  custom table and  one (dependent id) for family details.
    empid is common column for them. Based on this empid I should get child details (family details)
    In my search page,create/update page  Iam getting the master details , but Iam not able to get child details for the  selected employee.
    I have created a ASSOCIATION  say EmpFamAO  between two EO's (emp table    and   family details table)...................Based on empid column
    AND
    I have created a VIEW LINK  between this EO's  from master (EmpFamAO) left side  and child(EmpFamAO) right side of the view link editor
    But the issue is Iam not getting this common column (emp id) in my child table when querying  therfore Iam not getting related child details...when Iam clicking on details icon or update icon .
    Let me know for any clarifications.
    Thank you.
    Aravinda.

    Hi Aravind just you have to fallow these methods.
    public void createEmployee()
            EmpHeadersEOVOImpl hVo = getEmpHeadersEOVO();
            OADBTransaction tr = getOADBTransaction();
            if(!hVo.isPreparedForExecution())
                hVo.executeQuery();
            Row row = hVo.createRow();
            hVo.insertRow(row);
            row.setNewRowState(Row.STATUS_INITIALIZED);
            Number empId= tr.getSequenceValue("KSK_EMP_ID_SEQ");
            hVo.getCurrentRow().setAttribute("EmpId", empId);
        public void createEmpFamily()
            EmpFamilyEOVOImpl sfVo = getEmpFamilyEOVO();
            EmpHeadersEOVOImpl ehVo = get EmpHeadersEOVO();
            OADBTransaction tr = getOADBTransaction();
            sfVo.setMaxFetchSize(0);
            Row row = sTVo.createRow();
            sfVo.first();
            sfVo.insertRow(row);
            row.setNewRowState(Row.STATUS_INITIALIZED);
            Number familyId= tr.getSequenceValue("KSK_FAMILY_ID_SEQ");
            String empId = ehVo.getCurrentRow().getAttribute("StudentId").toString();
            sfVo.getCurrentRow().setAttribute("FamilyId", familyId);
            sfVo.getCurrentRow().setAttribute("EmpId", empId);
    now above first method show for master table and
    second one show Child Creation methos
    so in that method we are inserting empid into Child table and inserting child id also.
    So now your requirement will fullfill.
    Let me know if required any details.
    Thanks
    San
        public void save()
            OADBTransaction tr = getOADBTransaction();
            tr.commit();

  • Refernce Nav igational Attribute is not getting the data in Infoprovider

    Hi,
    I am facing the issue with Reference Characteristic which is  a navigational attribute for which data  is not getting populated in the cube.Please find the below scenario.
    We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
    0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute  0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute  0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
    Thanks,
    SUbhash

    Hi,
    I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
    We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
    0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
    Thanks,
    SUbhash
    Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

  • I am not getting the data in Bex from the cube

    Hi Experts,
    i am not getting the data from the cube to Bex,
    cube having the data, but i am not able to see this data in the Bex result area.
    Can  any one help me.
    Best regards,
    Bhaskar

    Hi
    In the manage cube, is reporting symbol is there for your requests
    If you have any red requests delete them and refresh
    If all requests having reporting symbols you may check the BEx without any filters or selection criterions
    Regards
    N Ganesh

  • Can not get the Cisco TSP to show UP - 2003 64bit

    Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
    Thanks
    Keith

    Hi
    There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
    You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
    Aaron
    Please rate helpful posts...

  • I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

    Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

  • PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

    Hi All,
    RDBMS:10.2.0.3.0
    Oracle Apps :12.0.4
    OS:AIX 5.3
    Problem Description:
    We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
    Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
    The error message what was shown is as below:
    "Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
    Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
    could anyone please share such an experience encountered for resolution..
    Would appreciate an early response..
    Thanks for your time!
    Regards,

    I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
    Check that you can see the output from apps through the viewer (the report may not hav output anything)
    Check whether you can print anything on that printer from apps.
    May also be worth checking to see if you can print to another printer from this report.

  • I have an iPad 2 and the newest apple tv. I do not get the option on my iPad to mirror on AirPlay. I've tried all the suggestions I've seen. Does anyone have a new idea?

    I have an iPad 2 and the newest apple tv. I do not get the option to turn mirroring on in the AirPlay function. I have tried the suggestions I've seen on here so far, but nothing has worked. Has anyone come up with a fix to this problem?

    Your Apple TV and iOS device (iPad) need to be on the same network subnet.  If they are you can verify when playing that the ATV is set as the output device by clicking the icon to the the right of the fast-forwrd button.  Or you can double-click the home button and swipe left twice to see this.

  • When I go into More 4 Catch up TV I do not get the bar that allows you to pause, enlarge, scoll forward when I click onto a programme is this Firefow or More 4? Can you help me fix?

    When I go into Channel 4 website to catch up on tv programmes on any of their channels I do not get the task bar to be able to pause, select point in programme to start from etc. Happens in both play and play in pop up. So if I play I can not make large screen.
    Don't know where problem lies but others in house who acces same web site do not have this problem and I am the only one that uses firefox.
    We all have different computers

    That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Maybe you are looking for