In BI 7, how to reload a red request into a DSO without deactivating delta?

Hi,
In BI 7, how to reload a red request into a DSO without deactivating delta?
I have a red request in DSO A. I have corrected the Transfer rules and want to reload the request from PSA to DSO A. I have active delta from DSO A to DSO B.
The only way I have found to reload the red request into DSO A, is to delete it first (like in BW 3.5). The problem then is that the system then gives me no other option than deactivating the delta from DSO A to DSO B. I then have to re-initialize delta from DSO A to DSO B with data transfer. Of course I first have to delete the data content in DSO B. I cannot do this because DSO B is very large. A reload would take several days.
I have tried to reload the request from PSA without first deleting it from DSO A, but DSO A is not a valid target in the scheduler unless I delete it from DSO A first.
This scenario must be very common and there must be a very simple solution, I just cannot find it.
Any one who can help me?
Best regards
Kent Dahlgren

Hi Kent,
Regarding your questions,
Have you already  tried to delete the red request and reconstruct it ??
If the system gives you no choice beside delete delta ODS A to B, how about if you keep deleting the delta from ODS A to B, but after that you re-initilize with the option : no data transfer.
Hope it can help you a lot.
Thanks,
Best regards,
Daniel

Similar Messages

  • When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying

    When I copy and paste a chapter from MS Word into Pages my tables and equations are trashed.  But importing them results in no control over my template How do I get my chapter into my template without copying?

    Try just Opening the Word .doc from within Pages and see if that gets closer to what you want, then copy the chapter you want from the Pages version.
    Peter

  • How can I pop my 5c into its backing without causing any more damage?

    I think my phone must have fallen because now there's a gap in the corner between the screen and backing, how can I pop my 5c into its backing without causing any more damage? Everything works fine ... its now just super duper fragile ... and open.
    I have a warranty but little spare time and much need for the phone.

    I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

  • How to merge several customizing requests into a workbench request?

    Dear experts:
      could you tell me How to merge several customizing requests into a workbench request in t-code:SE03?
    thanks
    Edited by: feng Qiu on Nov 4, 2008 3:24 AM

    Hi,
    Refer this:
    Re: Customizing Request's contents - Transfer them to a new request
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/d4/34196a249711d3b29e0000e817ab98/content.htm
    I believe you need to do this from SE09/SE10.

  • [Creative Zen 4gb] How can I plug my Zen into my PC without he's gonna lo

    If I put music on my Zen he's loading too, but that's bad for the battery
    when he load much times a little bit. so,How can I plug my Zen into my PC without he's gonna load?

    When you mention 'load' are you referring to the Zen being charged because the USB is plugged in ? If so, there is nothing much you can do. Of course if you have a SD card reader, you can load the songs to the SD card and thus you do not need to plug in your ZEN to the PC when you do that.

  • How to change the transport request of a NOTE without undoing the note

    When we applied the OSS NOTE we put it in a transport request. How can we move the objects into another transport request? Since this is a REPAIR type, SAP does not allow manual copy of the entries. I don't want to include the objects of this transport into another one, Is there any other way?

    1. Create a new transport request in SE01
    2. Select the request and click on "Include Objects: button.
    3. Select "Freely Selected Objects: option from the pop-up windoe
    4. Select "Selected Objects" option
    Now you see three rows without any PGMID selected.
    5. Check the checkbox corresponds to the row and enter the value OBJ & OBJNAME (Textbox without any label). (This valued can be retrieved from your previous request).
    6. Delete the same object from your previous request.
    7. Click on "execute" button.
    8. Click on "Save In request" button.

  • How to import external Transport request into  sap system

    Hi Gurus,
    I  have Transport request in the cofiles and data  files into one sap system
    how to import  those files into  another  sap system (those are different sap systems)
    could u tel anyone  any settings is required  and how to import Those Transport request.
    Any help is appreciated.
    Thanks in Advance

    Hi Siva,
    After copied the datafile  and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
    It will put the request in the que then you can import it to the target system.
    Thanks,
    Satyabrat

  • How to insert Captivate 8 Demo into RH 10 without users having to scroll to view content? i.e. can I

    I am building RH10 Web Help that primarily consists of Captivate 8 Demos. I recorded a 900px x 700px region with my monitor set to 1024x700.
    When I insert the demo into an RH 10 topic and specify that the display window for the demo should be 900x731 (extra height to allow for space needed by Captivate play bar) the viewer has to scroll the window to see entire contents if their screen resolution is less than 1200x780.
    Scrolling bad.
    How can I make the Captivate demo auto-size so that it fits in the 900x731 window I gave it WITHOUT any need for user to scroll.
    Thanks,
    Ted

    The skin of the help itself also takes some space. You can minimize or
    hide the skin.
    My preference is to insert a placeholder image that opens the actual
    movie in a popup. See
    http://www.wvanweelden.eu/blog/2012/07/27/captivate-movies-robohelp
    (Note that this method only works for Flash output.)
    Kind regards,
    Willam

  • How to convert a .class file into .java file without .jad using DeJDecompil

    Hi all,
    I am using DeJDecompiler and working with swing applications.If I try to convert a .class file into .java file,it is converting into .jad file only.Fine but if I try to save that file into .java file,It is giving lot of errors in that program.When I went into that program the total style of the program is changed and TRY-CATCH block is not recognised by the dejdecompiler,hence If I try to include some methods in the existing .java file thus got,I could not do.Kindly help me.
    If I get the .java file without error then I can process the rest of the functionality.
    Thanks in advance
    With kind Regs
    Satheesh.K

    Not so urgent today then!
    http://forum.java.sun.com/thread.jsp?thread=553576&forum=31&message=2709757
    I'm still not going to help you to steal someone�s code.

  • How can i convert CR2 images into jpg format, without iPhoto?

    i just import a lot of images with the format .CR2 to mac through "Image capture" is there an app to convert the frmat into .jpg, app like image capture or something like that?

    If Canons software doesn't work...?
    Try Snap Converter, File Juicer or Contenta Converter

  • How to re-download the ringtone into iOS device without sync

    Dear Sir/Madam
         I recently download the ringtone in itune store and I find out that only one of my iOS device can able to change into the tones I have download while the other one not. Is there anything I can do or any place I can check to enable the download ? Please help me out !!!
    Sincerly,
    Justin P.

    Ringtones are a one-time only download from the store. You will need to connect the device that you downloaded it on to your computer's iTunes and do File > Devices > Transfer Purchases to copy it over to the Tones part of your computer's iTunes library and you can then sync it to your other device(s).

  • How to Schedule a particular request from Datasource to Data Target

    Hi Freinds,
      I have loaded x no of requests of flat file sources to the data source(p.s.a) ,  But i am unable to load particular request no  to the data targert(incube) throgh D.T.P.
    Thanks & Regards
    P.vishwam

    Hello,
    You may try the this option.
    Right click on the datasource -> Manage. Now you can see all the PSA requests. Now, click on the traffic light button of all the requests except the request that you want to load, and set their status in to red.
    Now if you run the DTP, it will pick only the green one. After the DTP is completed, you can change back those red requests into Green status.
    Hope this helps.
    Regards,
    Bijesh

  • HT1848 I purchased alert tones in itunes and updated my itunes.  Now my alert tones do not show up, although if I were to go re-purchased those items, it says I already purchased them.  Where do I find those tones and how do I get them back into my phone?

    I purchased many alert tones in itunes and then updated my itunes.  Now my alert tones do not show up, although if I were to go re-purchase those items, itunes says I already purchased them.  Where do I find those tones and how do I get them back into my phone without having to repurchase????  This is so frustrating!  Please Help!

    1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
    2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
    tt2

  • I've lost my iTunes library -not the music, just the stars,etc., But that is still on my iPod.  How do I get it back into my computer??

    I've lost my favorites info, stars, etc. from iTunes.  The music is ok, just not the personal info.  All that IS on my iPod.  How do I sync it back into my computer without loosing from the iPod, too?

    See Empty/corrupt iTunes library after upgrade/crash.
    If there is no hope of recovering the old library then you can use my scripts ImportDevice Playlists and SyncStats to recover ratings, play/skip counts/dates, and playlists.
    tt2

  • How to change Transport request into local object $temp.?

    Hi experts,
    I would like to know to how to change a Transport request into and local object.
    I have already assigned Infopackage to TR, but its not required. We dont want this infopackage to be transported to prod. So how can i change that as a local object.
    Please put our valuable inputs.
    Thanks in advance.
    Regards,
    Dubbu

    Go To that Infopackage ,
    Extras Menu----Object catalog entry.  There you can change package name.
    or
    In SE09---Under the transport requests you can search for the infopackage name and delete from the TR.
    Regards,
    Srikanth
    Edited by: srikanth on Feb 19, 2009 2:26 PM
    Edited by: srikanth on Feb 19, 2009 2:27 PM

Maybe you are looking for

  • How to use another database schema in Dictionary project

    Problem description: 1)     I want to use Developer Studio to create my own J2EE project. Then I have to use Dictionary Project to maintain my database.  My database is Oracle. 2)     I created tables in Dictionary project and deployed to database 3)

  • Sync Outlook Calendar with iPod doesn't work with iTunes 7?

    Ever since I've upgraded to iTunes 7, when I try to sync my Outlook Calendar with my iPod - either Outlook crashes or it says it's doing it, but the calendar on my iPod is now blank even when I have things scheduled on my calendar. Is there any fix o

  • Changing order line item move-out date

    Hi All, I am pretty new on the CRM end. I have a requirement where- in i need to change the move-out date on the order line item. Could someone help me out what needs to be done in order to achieve the desired functionality. Thanks, Im

  • FSRM report limits using PowerShell

    I am following this article: http://blogs.technet.com/b/filecab/archive/2014/05/20/set-fsrm-storage-report-limits-using-powershell.aspx I did have this working just fine, but after installing Windows Updates today on a 2012 R2 box this functionality

  • Where can I find the entries of all components in NWSP15

    hi all,      how can i find the url or command for all the componnents' entry.   1.visual administrator: ..usr\sap\J2E\JC00 \j2ee\admin\go.bat.   2.config tool:..usr\sap\J2E\JC00\j2ee\configtool\configtool.bat   3.portal: http://localhost:50000/irj