In BI Bex Query Designer output, dont want to have unit at column Heading..

Hi
I have a BI Bex Query Designer report showing output with Qty unit at Column Heading level. Even in KF's Text i didn't mention unit. I want unit to appear to column fields instead of column heading. Pls let me know how to do that.
One more thing is: i have 2 reports exactly same except due date range is different. first report showing unit for each KF at the column heading level and for 2nd report showing column fields level... Surprising. Pls let me know what is the reason and how to control it.
Thanks...

Hi Harpal,
Key figures can have scaling factors and units/currencies. Normally, units/currencies are displayed for every key figure, but not the scaling factors. If you activate the Display Scaling Factors for Key Figures, an additional header row is added to the row or column header. Information about the scaling factor and currency/unit appears in this additional header row, as long as it is consistent (for example, 1,000 EURO).
For more information, You can go through
http://help.sap.com/saphelp_nw04/helpdata/en/e0/52029f961aa84d869b9b20fa7f7646/frameset.htm
Hope it helps & resolves your issue.
Regards,
Pavan

Similar Messages

Problem Bex Query Designer

Hello,
Our BI guys are facing a problem with the too - Bex Query Designer.
They want us to update the version of the Query Designer.
Can you please guide me as how do I obtain the latest version of Bex Query Designer.
My current version is - release 2004s SUpport pack - 0, revision 418
Thanks.

have a look at this
SAP NW BI BEx Compatibility of MS Operating Systems and Office Products [original link is broken]
Regards,
Ravi

Drilldown in BeX Query Designer

Hello,
I am new in SAP. I am having problem creating Drill down. I have this report where all the data is Transactional data. So I haven't created any Master Data. So I won't be able to use Navigational Attribute for Drill down purpose and I don't want to use Hierarchy. Is there any possibility of getting the Drill down in BeX Query Designer? Any help will be appreciated.
Warm Regards,
Debayan

Hi Debayan,
first of all, what is your requirement to create a drill down?
A drill down in BEx query means showing additional information from report output. There are 3 ways to drill down a query in BEx
1. Master data-Navigational Attributes
2. Master data- Hierarchies
3. Free characteristics
As you dont have any master data in the report (which is very strange) you can use the additional characteristics provided in the 'Free characteristics' to see how the drill down works in BEx.
Please share your exact requirement.
Hope this helps.
-Swati.

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Bex Query designer withour Enterprise Portal?

Dear BW experts,
After launching the Bex Query designer with BI7 system. After designing query, If I click on execute (Ctrl+R). It is launching internet explorer with error "Invalid Syntax error - Page cannot be displayed"
It is launching the following URL
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCCQ20071048070001&VARIABLE_SCREEN=X&DUMMY=1
I think it is looking for Enteprise Portal server. I dont have an EP server.
What is the alternate way to execute this?
Thanks in Advance...

Hello to all of you,
just to make sure that I do not missunderstand:
As far as I know in BW3.5 (without EP installed) you were able to execute a query directly out of the query designer and it was shown as a web-query.
Now I tried to do the same with a BI7-System the first time and I get the same symptom as Abdullah. We also do not have an EP installed on that system.
As solution, you all describe that I have to open the query in analyzer to see it in excel - OK - BUT if I do not want to see it in excel but as a webquery (like in my good old BW3.5) instead ? Isn't that possible anymore ???
Uwe

Problem with Queries Structures in Bex Query Designer and Universe Designer

Hi everyone,
I have a problem when i try to do a Universe from a Bex Query Designer.
When I use a Characteristic Restrictions in a Structure, the universe only show me the structure without the objects inside it.
EJ:
1) Bex Query Designer
Colunms
(Structure) ZSRT_123
                      - (Characteristic Restrictions) Reg Guayana
>          (InfoObject)     0Product = 'XXX'
>          (InfoObject)     0Country = 'YYY'
     - (Characteristic Restrictions) Reg Caracas
>          (InfoObject)     0Product = 'AAA'
>          (InfoObject)     0Country = 'BBB'
Rows
(Structure) ZSRT_456
               (Key Figure)     Net Sales
2) Universe designer
(Class) ZSRT_456
>(Measure)      Net Sale
(Class)     ZSRT_123
>(Dimension)      ZSRT_123
The universe dont translate the two Characteristic Restrictions in the structure ZSRT_123.
Any information would be much appreciated. Thank you.

Hi,
I assume that you are using BOE XI 3.1 SP2.
We have added an option in SP2 to generate or not the L00 level.
Unfortunately this option applies not only on characteristics but also on hierarchies, hierarchies variables and structures: that's the reason why you have no elements belonging to the structure generated.
I recommend to always generate L00 in order to have your structure generated correctly.
This issue will be fixed in SP3.
Regards,
Didier

Condition (Defintion) in BEX Query Designer

Hi Experts,
I am trying to define a condition in BEX Query Designer.
I defined my condition and bit confused with Characterstic Assignment
What Happens if is select 9What is the difference)
1) All Characterstic in the Drilldown Independtly
2)Most Detailed Characterstic Along the Rows
3)Most Detailed Characterstic Along Columns and
4)Individual Chars and Chars.Combinations
Thanks

Hi,
● All Characteristics in the Drilldown Independently
This setting allows you to apply a condition in a general way. Depending on which characteristics you use in the drilldown, you obtain different results.
Note that the characteristics that are already used in an active condition for characteristic combinations are not included.
This option is optimized for ranked list conditions, but can also be used for threshold value conditions with relative values.
●Most Detailed Characteristic Along the Rows or Columns
This option is optimized for threshold value conditions. The condition is applied to the most detailed characteristic of the rows or columns.
Note that this function is not supported when executing the query in the BEx Analyzer. For more information, see Restrictions in the BEx Analyzer.
● Single Characteristics and Characteristic Combinations
This setting allows you to evaluate the condition for characteristics or characteristic combinations defined for specific drilldowns only. You can select any characteristic (of the characteristics used in the query in rows, columns, or in the free characteristics) or a characteristic combination.
○ If you only want to evaluate the condition when a certain characteristic is present in the drilldown, select this characteristic.
○ If you want to evaluate the condition for characteristic combinations, select multiple characteristics.
Source:
help.sap.com
For more information and examples please check the following link:
http://help.sap.com/saphelp_nw70/helpdata/EN/73/702e39074dc93de10000000a114084/frameset.htm
Hope it helps.

Values Bifurcation in BEx Query Designer

Dear BI Gurus,
In a column we are getting both positive value and -ve value. We want to bifurcate the values and show only +ve value in one column and show -ve value in another column. Is it possible through Bex query designer?
Please through some light on this issue.
With Regards,
Balachander.S

Hi bala,
This can be achieved by creating two calculated Key figures, Just use else if condition in the formula and use if KF1=KF>0 then KF else 0, here all the positive values will be displayed similarly use if KF2=KF<0 then KF Else 0 it will display all the negative values. But here all the values will be displayed. Just hide the Key figure and display only calculated keyfigures. Else you can use exceptions to differentiate the positive and negative values.
Hope this helps.....
Rgs,
I.R.K

Structure copy in BEx query Designer?

I created structure in BEx Query Designer in BI PRD which is our BI production system.
I'd like to copy structure to BI DEV which is our BI development system.
Is is possible?
If you have any solution, tell me about that.
Thanks.

Hi
If you want the object which is there in PRD to DEV system means, the only way is to do transportation. but to do reverse transportation, you should have STMS connection from your PRD to DEV system.
The better way is to create the structure again in DEV system.
If you want to go with reverse transportation, consult your basis person.
Regards,
Venkatesh

Creating Restrictions in BEx query designer for (1-a), where a is variable.

Dear All,
>> Suppose for the variable in the BEx query designer, I've created restriction for 0FISCPER to the variable 0P_PER (as 0P_PER-1) by right clicking 0P_PER3, from that a dialog box appears. In that I've selected 0P_PER3 and then clicked on offset variable and when I set the offset variable, it works for (0P_PER-1.etc, 0P_PER+1,etc..)
But if I want to have (1-0P_PER), then plz tell me how to define this restriction?
Plz explain me the steps to perform (1-0P_PER) restriction in BEx query designer in BW1.
I'm using SAP BI 7.2 gui.
Expecting your reply soon,
with Regards,
Jerald

My requirement is that I want to have " 1-fiscal year"., But this I could not define using offset variables, since using offset we can define "fiscal year +1" or "fiscal year -1".
So there would be some other way to define "1-fiscalyear". So Please help me to define "1-fiscalyear" by giving me the steps.
Thank you,
with Regards,
Jerald

Drill down ( Collapsible Row ) Report in BEx query designer ?

Dear Friends!
I am supoosed to create a report drill down report for Purchasing History to be precise, I know that we can have drill down feature using heirarchy but is it possible for Us to have PO & PO item heirarachy ? or any other way to do drill down reporting in SAP BEx Query designer ?
like my current report is : -
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Now I am supposed to create a report in which
normal view
| Vendor | Purchasing Organisation | Purchasing Group | Plant | |> PO Number| .... ( keyfigures) | Payment |
drill down or collapsible view ( please consider the heading as data I am not talking about dynamically change of headings ).
| Vendor | Purchasing Organisation | Purchasing Group | Plant | V PO Number | Item | Material / Service | Description | .... ( keyfigures) |
is there anyway to design the report in above mention manner ? you any input will be appreciated greatly.
Thank you so much!
Regards
Naim

Hi Naim,
usually we don't do the transactional data as hierarchy. not sure the reason behind your requirement.
we can do one of the below :-
1. To have the default view as
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
and then user can drill down on rest of the characteristics for detailed view later on.
2. or if they don't want to drill down on characteristics;-
we can build 2 reports , one for header level information and then jump to second query for detailed information(item level) using RRI.
first query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | | PO Number| .( keyfigures) | Payment |
second query:
| Vendor | Purchasing Organisation | Purchasing Group | Plant | PO Number | Item | Material / Service | Description | .... ( keyfigures) |
Let us know if this works out?
Regards,
Sakthi.

Quantity is Showing Blank : Bex Analyzer, Source - Bex Query Designer

Hello Expert SAP BI,
I Extracting Data from Flat File,
Till then Cube My Transaction data Loaded Perfectly ,
i want to create Report in Bex Analyzer, fetching fields from Bex Query Designer.
Characteristics are showing in Rows , that showing in Report , but in Columns added Key Figure , its not showing in Report .
Can any one Suggest , what will be issue and how i have resolve it.
- Thank you.

Datasource -> Transformation -> InfoSource
Infosource -> Transformation -> DSO
DSO -> Transformation -> Cube

BI Bex Query Designer

Hi SDN Guru's,
I am working SAP BI Reporting Area, My Customer asking we want to BI Report with Value and Description how to make this.
We have only Product Hierachy with value Ex:- 000000211210042803, My Client expecting with description Manoj & Co like that.
How to do in BI Bex Query Designer, can you please explain step-by-step.
Thanks in Advance Guru's.
Regards,.
Kumar.

Hi,
Pre-Requisiite: Both Key and Text should be maintained in BW system for this Infoobject
In Query designer, Click on Characterstic properties-> Select Key and Text-> Save-> Run the report
Regards,
Suman

As Bex Query design why I canu2019t select from list in values range

Hello experts,
I want to pop input window when I use analyzer run bw report, I know to add filter through restrict, then I selected value ranges, it was appearing between input text, the button canu2019t let me input, I tried select from list, Bex Query design occured some errors, if click u2018exitu2019 will prompt unknown software exception(0xc00200001) then stop .
the imange: [http://www.itpub.net/thread-1192217-1-1.html]
How to input text or select list? Why My Bex query design canu2019t do select from list?
please let me know the soultions, thanks for you help in advance
Regards,
Steve

first of all, thanks for your help. if need to install batch, please let me know. many thanks .
more infomation as belows:
the windows prompt:
Your application an unhandled exception occurs. If you click [continue], the application will ignore the error and try to continue. If you click the [end], it will immediately close the application.
I clicked more detail button , displayed as belows:
For more information call using Just-In-Time (JIT) debugging details
Please refer to the end of this message (instead of this dialog box) information.
Exception Text **************
System.NullReferenceException: Object reference not set to be the implementation of individual objects
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.HandleUnhandledException(Exception iException)
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.OnGuiUnhandledException(Object iSender, ThreadExceptionEventArgs iEventArgs)
in System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t)
in System.Windows.Forms.Control.WndProcException(Exception e)
in System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
in System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
in System.Windows.Forms.Control.SetVisibleCore(Boolean value)
in System.Windows.Forms.Form.SetVisibleCore(Boolean value)
in System.Windows.Forms.Control.set_Visible(Boolean value)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
in System.Windows.Forms.Form.ShowDialog(IWin32Window owner)
in System.Windows.Forms.Form.ShowDialog()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.GetUserSelection()
in com.sap.bi.et.selector.BExSelectorDialog.SelUIDialog.ShowSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.InvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.OnInvokeSelector()
in com.sap.bi.et.selector.BExSelectorDialog.SelUICtrlDDBox.picValueHelp_Click(Object sender, EventArgs e)
in System.Windows.Forms.Control.OnClick(EventArgs e)
in System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
in System.Windows.Forms.Control.WndProc(Message& m)
in System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
inSystem.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
in System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

BEx Query Designer - Url openining problem

Dear All,
While running a BI query through BEx Query Designer, it is generating portal URL as:
http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZTEST_Q0001&VARIABLE_SCREEN=X&DUMMY=20
have created source system and all RFCs required as running properly.
Any ideas further please ??
my usage type is as below
Active Usage Types
Product Name      UT Code      Short Name      Description      Activation Date      Configured
SAP NetWeaver 2004s      BI      BI Java      BI Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      AS      AS Java      Application Server Java      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EPC      EP Core      Enterprise Portal Core Components      Mon Aug 11 00:00:00 IST 2008      YES
SAP NetWeaver 2004s      EP      EP      Enterprise Portal      Mon Aug 11 00:00:00 IST 2008      NO
SAP NetWeaver 2004s      AAS      AS ABAP      Application Server ABAP      Mon Aug 11 00:00:00 IST 2008      YES
Please correct me where to configure default host name
Regards,
Ravi ghangurde

Dear all.
Below are the details probelm .
i want to open the portal nwa using url "http://10.2.202.154:50000/nwa" but it's ask me username and password screen , when entering J2EE_ADMIN user and correct password next screen is not appears
and same user name and password screen shows again.
when putting worng password it's show authontication fail message.
Below are url details after providig the correct password.
http://10.2.202.154:50000/logon/logonServlet?redirectURL=%2Fwebdynpro%
2Fdispatcher%2Fsap.com%2Ftc%7Elm%7Ewebadmin%7Emainframe%7Ewd%
2FWebAdminApp
in morning it was showing the nwa screen when loginig with path
http://10.2.202.154:50000/nwa and j2ee_admin and password
but we are only change sso tiket parameters in default profile and create tiket in visual administrator.
after than i am not able to open the portal NWA
i want to run post installation wizard for BI post installation please suggest to open the NWA.
is any other way for BI post installation wizard
Regards,
Ravi Ghangurde

In BI Bex Query Designer output, dont want to have unit at column Heading..

Similar Messages

Maybe you are looking for