In Billing Base Price should be in grey mode and in Sales order Change mode

Hi
I have one requirenment the Base price (ZPR0) should pick automatically from condition records and system should allow to change ZPR0 in Sales Order item level , where as it should be Grey mode in billing document item level.
1. In the condition type ZPR0 i had maintainted as NO LIMITATION and in copy controls of VTFL the pricing type as" D"
so system is allowing to change the base price at both Sales order & billing doc level.
my requirement is System should allow to change the price manually in Sales order and at billing document it should be in grey mode, so that no user cannot change the price at billing level.
Regards,
Satya

Dear Kota,
If i maintained as "B" than system will not allow to change in Sales order.
See my req. is System should allow the user to change price  in Sales Order and it should not allow the user to change in Billing doc.
Regards,
Satya

Similar Messages

  • In Billing doc Base price should not change where as in SO system allow

    Hi
    I have one requirenment the Base price (ZPR0) should pick automatically from condition records and system should allow to change ZPR0 in Sales Order item level , where as it should be Grey mode in billing document item level.
    1. In the condition type ZPR0 i had maintainted as NO LIMITATION and in copy controls of VTFL the pricing type as" D"
    so system is allowing to change the base price at both Sales order & billing doc level.
    my requirement is System should allow to change the price manually in Sales order and at billing document it should be in grey mode, so that no user cannot change the price at billing level.
    Regards,
    Satya

    Hi ,
    Create transaction varient for vf01 and vf02 in SHD0 and assign it to Users.
    Regards,
    Suresh

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

  • Billing Block removal not updated in the sales order change log

    Hi Gurus,
    A specific Billing Block is automatically assigned to the sales document header (VBAK-FAKSK) when the net value of the sales order is negative. This is an order related billing.
    Sometimes the Billing block is getting released automatically and the Negative Invoice is getting created in the Background job run for creating the invoices. When we check the sales order, the Billing block is not existing and the removal of the billing block is not recorded in the Change Log of the sales order.In the CDHDR table also there are no details about the release of the billing block.
    This is happening only occassionally. When I tried to replicate the issue, the system is not allowing me to create the invoice as long as the billing block is there in the sales order and if I remove the block, it is recorded in the sales order change log.
    My doubt is.,
    1. How the billing block is getting released automatically?
    2. Even if the block is released,  why it is not recorded in the Change Log of the sales order?
    Looking forward your for suggestions and solutions.
    Thanks,
    Ravi

    Hi
    Did u check in sales doc. details screen.There u can block for billing.

  • I recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

    i recently changed my wallpaper and when i was on safari the rainbow wheel popped up and i had to restart my computer, now theres no wallpaper it just a grey denim and when i try change the wallpaper only the tool bar changes not the background, help ?

    Hi. When you were in the recovery drive doing permissions, did you try and run a repair of the boot drive? Did you try single user mode? Try these first and then go back and try to reinstall the operating system.When I say repair boot drive I don't mean permissions. There are both options in disk utilities.When you open disk utilities ,you will see in the left column  two drives plus possibly  a boot partition that look like an external driv. click on the second drive and in first aid use repair disk. If you still can't boot and it will not let you restore, you may have to do a clean install.   http://support.apple.com/kb/PH18869?viewlocale=en_US  

  • Price in invoice is not getting copied from Sales order

    Hi,
    In my case when i create a sales order...my VPRS condition is taking price 4.020,24 (@335.02/PC). When i create a Invoice it is coming with 4.020,22 value and .02 is coming in different condition type ZDIF ( Rounding diff) automatically. When i check my PGI accounting document there also price 4.020,22  hits the G/L account.
    Now able to understand why .02 value is going in the ZDIF condition ?
    Need help
    Regards
    Nitin

    Hi Nitin,
    Rounding condition is coming in picture because there will some difference in PR00 and VPRS.
    Generally VPRS is a statistical condition type and it is just used for viewing purpose not a part of calculation.
    So you can go to V/08, select your pricing procedure and then control data.
    In that find out VPRS condition type and click on statistical, then it wont come in calculation.
    If you want that this should be copied then you have to made changes in copy control.
    Go to VTFA if you are making billing document with reference to order document.
    Go to VTFL if you are making billing document with reference to delivery document.
    Select your combination of billing document and delivery document/order document.
    Then go to item level and select you item category and then click on detail
    In that you will find pricing type just change that pricing type to D.
    Now it will copy pricing as it is from sales order.
    Hope so it will solve your problem
    Regards
    Raj.

  • Change delivery date on sales order -- change of Billing date on item

    Hi,
    We are trying to change a delivery date for a sales order's item, if we do so normally the billing date on that item's billing tab will change automatically also.
    Now, for a specific sales order the billing date in the billing tab is not changing.
    We compared 2 sales orders .. the same statusses - no blocks - ... and with one it works (changing of the billing date) and with the other it does not work..
    Please help !
    thanks a lot!

    Hi,
    Check the following.
    If invoice dates are defined for the customer, the system proposes the billing date from the invoice date calendar. If no invoice dates are agreed, then the actual goods issue date is formed on the basis of delivery related billing. In order related billing, the billing date of the order forms the basis of the billing date.
    If you are billing services, the system proposes the date of services rendered. You can change the date manually in the sales document.
    If you are using a billing plan to bill a project, the system can propose billing dates for the billing plan on the basis of planned or actual dates in the corresponding milestone.
    In a billing plan for a maintenance or rental contract, you can specify rules by which the system determines billing dates on the basis of other dates in the contract.
    Regards
    Nadarajah Pratheb

  • Variant price for one feature is missing -error in sales order

    Hello Experts,
    I am working on a SAP implementation project for a premier automobile company...
    I have stuck on one point here in this project SAP is a back end system. So sales order will generated based on the interface feed from a legacy system.
    We have Identified to have two different variant classes in SAP sales order. one will contained all vehicle specification, this will be used by PP for MRP and other variant class will have only optional features and all these features should have variant price in VA00 (maintained as pricing record) in pricing. if any of the feature don't have price then this sales sales order should through an error massage (we will customized this error message as per clients requirement)
    Can any one suggest the relevant sales order user exit or any other method to do this check?
    Thank & Regards,
    Sulabh

    Hi Sulabh,
    In standard procedure any component value of VA00 not picked by the sale order system doe's not show any kind of message.
    Use exit MV45AFZZ - USEREXIT_PRICING_PREPARE_TKOMK.take the help of ABAPer he will write the logic where the VA00
    value missing in sale order system should through the error or warning and message which will illustrate the problem,according
    to that user will check and maintain the price.
    Ram

  • Billing plan (Downpayment) for saved and open sales orders at header level?

    Hi gurus,
    I have configured billing plan in my SD environment at Item Level.
    I want to change it to header level.
    Questions:
    1- When I make the changes to update the system to have billing plan at header level for future sales orders, is that possible for me to change all my saved orders and open orders with the new settings so that I can also have those saved and open orders with a billing plan at item level?
    2- If that scenario is not possible, could we for example copy the data of a previously saved or open sales order into a new sales order with the new customizing (Billing plan at Header level?)
    Thanks for your input
    Kind regards
    Chris

    Hi
    I am afraid you cannot do that converstion for the existing orders. BP at header level are enabled at teh document type level, while BP at item level is done at item category. So both are independent. Mostly it is advisabel to use BP at item level only.
    If you are already using item level BP, and want to mvoe to header BP, then only future transactions can be executed with BP at header level. Existing item level BPlans will remain so in the system.

  • Free of goods should come automatically back when creates return sales order

    Dear sd experts
    I Know one thing that free goods wont come back ,, for ex when we create return sales order free goods wont come bz in VTAF copy requirement 302
    it means dont copy free goods
    Now i went VOV7--- for item category TANN-- i have maintained billing relevance A it means free goods items will come in to billing
    now when i am creating return sales order with reference to billing Free goods are not coming
                  My doubt is suppose if  my clinte asks free goods   will come automatically when creates returns how to do it ?

    Hi Ali,
    I just checked and understand in the below way:
    When I Do the PGI system is posting say 50 USD to COGS. But, when I do the Invoice ( 100 USD is credited to sales account and 100 is debited to discount account) So at the end 100 is getting Nullified. But, when we see P&L account you will COGS of 50 USD.
    I checked along with my FI consultant and she confirmed that its posting as per expected way only.
    Let me know if you need more details here.
    Regards, Sai Krishna.

  • Price is not being updated when creating a sales order using DTW oOrders

    Hello experts,
    When I create a sales Order using DTW (oOrders), the information in the input files document.csv and document_lines.csv is updated with no problem, except the price. The price is being ignored from the input files.
    Is there something that I must considered when trying to update the price of a sales order using the DTW?
    The field "price" was mapped in the source and target fields in DTW.
    Here is the document_lines.csv
    RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
    RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
    1,1,_SYS00000000059, ,30PA08-0360-25,1,11.2,3,20110702,V08,A5
    1,2,_SYS00000000059, ,30PA08-0707-25,1,15.2,3,20110702,V08,A5
    1,3,_SYS00000000059, ,30PA08-0707-22,1,18.3,3,20110702,V08,A5
    And the document.csv:
    RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
    RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
    1, ,c-6167,20110702,20110702,2
    Thank you for your help
    Jorge Manzo

    Hi,
    Try to re-create your dtw using my template,and use text tab when saving your template.
    SO-Header
    RecordKey     CardCode     CardName     Comments     DocDate     DocDueDate     DocNum
    RecordKey     CardCode     CardName     Comments     DocDate     DocDueDate     DocNum
    1     24-25 MANUFACTU     24-25 MANUFACTURING          4/5/2010     4/15/2010     11142
    SO-LINE
    RecordKey     linenum     itemcode     qty     uom      PriceAfterVAT      Price     SalesPersonCode
    RecordKey     linenum     itemcode     qty     uom      PriceAfterVAT      Price     SalesPersonCode
    1     0     SHAFT HEX 7/8"     1     pc     4536     4050     CRIS
    Note : Line -(LINE NUM and QTY is important upon computation of Price if SO is ITEM TYPE Document.
    hope this will help you!
    Regards,
    Darius

  • Credit block should not require for Credit card paid sales order

    Dear friends,
    my client want that sales oder with credit card payment should not block sales order for credit management reasons. Hoe can it be configured.
    Regards
    rdc

    Are you using credit card processing in SAP to get the authorization?
    If you are then the authorization should not block the order.
    Or are you using credit card as a form of payment (without authorization) in which case this needs to be put on the customers account as a payment and then the order entered.
    Where are you holding the credit card details?

  • While Sales Order Change , need to create Billing plan Item wise

    Hi ,
    We are using BAPI_SALESORDER_CHANGE for changing item category as well as parallely need to create billing plan item details (FPLT-FKDAT, FPLT-AFDAT, FPLT-NFDAT), Hence Please tell me the Procedure.
    Example: Billing Plan is Depending on Item Category, In my scenario , initially Item category do not have Billing Plan Tab, When we go for BAPI_SALESORDER_CHANGE for changing Item Category to Supported Billing Plan, So How can we update (FPLT-FKDAT, FPLT-AFDAT, FPLT-NFDAT) in Billing Plan Tab for every sales order item.
    Regards
    Jana

    Hi Ravi,
    Can You explain in detail.
    Regards
    Jana

  • How has the Sales Order Changed Prices ????

    I created a Sales Order, manually entered the prices  and Open - Printed.
    All saved and updated.
    However, customer  has received wrong prices.
    How do I check if another user has made changes?
    Or have the prices defaulted to another price list  called the (catalogue price list )
    Edited by: Philip Eller on Jun 13, 2008 9:57 AM
    Edited by: Philip Eller on Jun 27, 2008 9:53 AM*

    Darpal,
    Which Price field on the row of the Sales Order are you viewing?  There is both Unit Price and Price After Discount.  Unit Price editable, while Price After Discount is not.  If you are only viewing Unit Price on the document, B1 may be changing the price in the Price After Discount field without you being able to see it.
    B1 uses Price After Discount to calculate the final row total.
    If the Print Layout points to Price After Discount, you'd see a different price than what is in the Unit Price field on the document inside B1.
    The enhancement pack print layouts all point to the Price After Discount field, not Unit Price, out of the box.  This quite possibly be your issue if you are using the layouts directly from SAP without alterations.**
    Price After Discount will differ from Unit Price if there is any special pricing (i.e. Period and Volume Discounts or BP Special Pricing) or if a discount has been applied to the row n the Discount % column.
    Are there any types of special pricing being used?
    Confirm which database field the Price field is linked to on the print layout?
    Regards,
    Brad Windecker
    Edited by: Rui Pereira on Jul 8, 2008 5:28 PM

  • Finding batch job name for sales order change (billing block)

    hi,
    there is a tab known as billing block in the sales order.
    now a batch job ran which removed this billing block and released the sales order for delivery and PGI activities.
    we have the information regarding the date and time on which this batch job ran but the job name is unknown.
    also we tried in SM37 which gives no details.
    we have information regarding the user name of the batch job but name is unknown.
    help us in finding the batch job name with the above mentioned available data.
    it is a very high priority.
    thanks in advance
    Rahman

    Hi ,
    in SM37-->
         a)Set the Job start condition ( dates ) --You have information --YOu can keep them blank if you don't have the information. But it will fetch all the batch jobs of the user.
         b) user Name  -You have information
         c_ use '*'  in place of Job name
    Then this will fetch you the Batch Job name . Then Check step --> you can find the program name.
    You can check the Log for job details like when started and when completed.
    Regards,
    Lanka

Maybe you are looking for