In billing document VAT condition type flowing 2 times with Different value
Hi,
1. In my requirement, In order creation time , in the pricing procedure ZPROJT (Proj Material Sales) VAT condition type (JLST) is flowing one time with the condition record of 5% for one line item and the same we changed manually to 12.75 %, for the same condition type (JLST) and we saved the order. After that we created delivery with reference to the same order, final the billing document creation time with reference to the delivery (in the pricing procedure ZPROJT (Proj Material Sales))for the same line item VAT condition type (JLST) is flowing 2 times with 2 different values ( 5% and 12.75%) and it is calculating the 2 different values to the final value. But normally only the manually changed (12.75%) value should be taken to the account. Please help me How to stop the condition type (VAT C Type "JLST") from flowing two times for the same line item in the billing - and we need to take the value of (12.75% manually changed value) to the final calculation.
2. In one pricing procedure normally if you add the same "C Type" for two times it will throw the error message like "Duplication Of C type" and you can't save the order with out deleting the same. Please tell me, where is the contole for the same.
Hi,
Check copy control settings in VTFL
At item level make pricing type as D - Copy pricing elements unchanged
KAPIL
Similar Messages
-
Reprice at time of billing - only certain condition types not all of them
Hi,
My client has a requirement to reprice certain condition types at time of billing. Is there a way to reprice certain conditions at time of billing document creation and leave other conditions as they are copeid over from the sales document?
It doesn't matter if a User Exit is used, routine, etc.
Thanks
ChrisHi,
It is not possible to reprice only specific condition types and not all the conditiontypes. We have a pricing type to redetermine the tax conditiontypes. But it is difficult to reprice the c.types of our choice.
However through user exits, it should be possible. If you discuss with ur developer, he can help you. Also you can look at the possibility of creating a new pricing type (again withthe help of developer). I think it is not possible, but give it a try,may be the developers will find a way to dothis. -
Ranch Billing, the excise condition type JMOD calculation is wrong
Hi
I wish to know that in case of Branch Billing, the excise condition type calculation is wrong!!
I am surprised and unable to know how it could be?
In billing document display (T.code VF03) , Out of 3 Line items, Basic Excise Duty of 2 line items/ Materials were wrongly calculated.
i.e. In Item level Condition Overview---> the excise condition type JMOD --> details -->
Amount 10.000 %
Cond.base value 79,077.85 INR
Condition value 5,733.14 INR
Alt.calc.type 355
Ideally, It must be 7907.85 INR instead of 5733.14 INR wrong value.
Please help me to know the possible reason.
Thanking you.
PPCheck the condtion value in condition type UTXJ . If the JMOD value is 10% of UTXJ then assessable value should have been maintained for the Material and Plant combination in J1ID. This is due to Routine 351 maintined in pricing procedure for the condition type UTXJ
check and confirm
Senthils -
Hi Friends,
There is a business requirement to add a VAT Condition type where user should be allowed to add the amount manually whatever it would be. I have created a condition type by copying standard conditon type which belongs to TAX category and kept the following settings
Condition Class - 'D' Taxes
Cal Type - 'A' Percentage
Cond.Catg - 'D' Taxes
Rounding Rule - ' ' Commercial.
Under Tab - Changes which can be made
Manual Entries - 'C' Manual entries has priority
Item Condt - Checked
Amount/Perc - Checked
Rest all settings same.
I added this condition type in the Pricing Procedure.
Problem is the TAX condition type is not populating automatically in Pricing Condition. Secondly the Condition Value field is disabled. If this will be disabled then how the User will enter the TAX manually. Third i would like to know which Account Key shoiuld be used.
Please help. I am working on Pricing for the first time.Hi,
1.You have maintained field manual entries as manual entry has priority then how it would come automatically into sales order?
Please share this condition type settings in pricing procedure
2.Share screen shot of condition tab of sales order with that condition type
3.It is depends upon you because there are many account keys related to tax like TX1,TX2 and TX3 etc. ( but what ever you are taking account keys in pricing procedure ,for them you have to maintain G/L's in OB40).
BR's,
Naren -
STO Billing document shipping condition
Hi,
In STO billing document shipping condition is always copied from the customer master, even if we have a difference shipping condition in STO Order & Delivery.
For Ex:
STO Purchase Order - Shipping Conidtion AIR
Delivery _ Shipping Conidtion AIR
Billing _ Shipping Condition OCEAN
I have done some testing and it seems Ocean is picking up from Customer Master.
Is it SAP standard or is there any configuration missing from my side?
Thanks & Regards,Yes as like sale order process where system will copy the shipping condition from sale order to billing, it will not happen in case of STO. In fact, shipping condition will not copy from delivery to billing in both these cases (sale order and STO).
G. Lakshmipathi -
Can we a condition type in PO, accepts negative value & vendor no.
Hi freinds,
i have a query,
can we a condition type in PO, where user can enter negative value and can assign a vendor against that condition type as like freight vendors in import PO.
now what i have done is , i have created a condition type which can accept negative value , but unable to assign vendor against it.
if i select condition category as delivery cost it allows me to enter vendor but not a negative value.
pls suggest what should i do ?
regards
RashmiHi,
Please, could you tell me how resolved this requirement? Because I have a similar problem.
Thanks a lot in advance.
Gabriela Ramirez.
Edited by: Gabriela Ramirez on Aug 25, 2009 3:47 PM -
Condition type is statistical with account key
Hi,
the requirement is Condition type is statistical with an Account key and it should not post the Account entries.how to avoid the same.All the settings are mandatory and it should not hit the accounting books.
Thanks in advance.
Regards
Narendra
Message was edited by:
Naren NarenHi Naren,
If the condition is statistical and you don't want to hit the accounts then simply remove the account key.
This is a very strange requirement and first you should ask what is the purpose of giving such kind of requirement to configure.
Regards,
Amrish Purohit -
How i said on the question. I tried to upgrade the ios on the phone and I was asked for my icloud user and password. I don’t remember these exactly and I tried several times with different options but unsuccessfully. I also forget my email used to configurate the phone. I have the phone box and the bill. I sent you an email with my problem and attachments with the box informations, the bill and the reset request. What to do? You said to me:
Your request comes from an unrecognized email domain. Apple accepts email requests only from email domains for Apple-authorized carriers.
Please re-submit your request using your official carrier domain.
but this email is authorized, what to do??
respectfully, BebaIf you have forgotten then these links are the only way to resolve
http://www.apple.com/support/appleid/
As long as you have owned the iPhone from new and your Apple id is the one used to activate when new
OR have you recently purchased the iPhone secondhand ? -
Running the same code multiple times with different paramters automatica​lly
Hi guys,
I want to run the same code multiple times with different paramters automatically. Actually, I am doing some sample scans which takes around 2 hours n then I have to be there to change the paramters and run it again. Mostly I do use folowing paramters only
X_Intial, X_Final, X-StepSize
Y_Intial, Y_Final, Y-StepSize
Thanks,
DushyantAll you have to di is put all of the parameters for each run into a cluster array. Surround your main program with a for loop and wire the cluster array through the for loop. A for loop will autoindex an input array so inside the for loop you just have to unbundle the cluster to get the parameters for each run.
Message Edited by Dennis Knutson on 07-13-2006 07:50 AM
Attachments:
Cluster Array.JPG 9 KB -
HANA procedure call n times with different parameters
Hi,
I am implementing some procedures on sql script and due to parallelization reasons i would like to call the same procedure n times with different parameters being the procedure name one of the parameters.
Which method would you advise me (xsjs, ...)?
Thanks in advanceThis is a known issue. We plan to have a fix in a future release but there is currently no ETA that I can share with you. I would recommend that you log an SR with support so that we can track the fact that this issue is affecting you.
Chris -
Scrap Sales-VAT Condition Type Not Copying into Billing Document.
Dear All
I am facing problem while billing a scrap sales order.
1. Even though condition record has been maintained for JIVP, the condition is not picked automatically.
2. I enter it manually and save the document and later do delivery and billing; in billing, if I go to Conditions Tab, I do not see VAT condition copied into the document.
Naturally, when I am doing analysis, only PR00 condition type is showing.
Kindly require your suggestion as to where I might have gone wrong.
Thanks and Regards
AdithyaPrasanna,
It is fine to press Release to Accounting button, but the issue has not yet been identified to fix and then Release to Accounting.
When I go to document flow and check the accounting documents in Goods Issue Document, Accounting document has not been created only, only Profit Centre and Controlling Documents are created. Am looking on the same y it has happened like this.
Thanks and Regards
Adithya -
Additional VAT condition type is not flowing to PO
Dear All,
An additional tax of 1 % is levied in State of gujurat and for this we can take the credit . It behaves exactly like VAT like it calculates its value as 1% of base amount and excise duty levied on it . But this condition is not available in standard TAXINN procedure . So we created a new procedure copying from TAXINN .We created a condition type copying from standard condition type JVRD that is for VAT on which we take credit .Then we assign this condition type to tax procedure immediately below condition type JVRD and it should calculate the value in the same way as that of VAT .Then we assigned this procedure to India , assigned all the condition types in CIN config and maintained default condition types for this procedure copying from TAXINN .
But while we are creating a PO after that ,this additional tax condition type is not flowing in it .
Can anybody let me know where is the missing link in this customisation .
Regards
Abhijit DasHi AP ,
The condition type is Valid from : Todays Date and valid to 31.12.9999 . Is there any problem with this ?
Abhijit -
How to find out (parent)Base document, Base Condition type
Hi,
Is there a way to find out the base/parent document for a particular document.
1. We copy OR doc and rename it as ZOR, Is there a table which stores this parent-child relationship.
2. Similarly, we copy K007 and lets say we rename it as Z007, how can we find out the original condition type it was copied from.
Yes, we can probably compare document category or condition type class, but isn't there a table or some source where we can get the info from?
Thanks.
Edited by: SAP SD_Newbie on Sep 4, 2011 10:28 AM
I am extremely sorry for ACCIDENTALLY posting this question twice. I've logged in from a slow-speed cybercafe where it takes lot of time to post the question. In the process I open another and post, as a result it appears twice.
I looked for options to delete the duplicate questions but I found none.Raghu,
Just wanted to make my life lil easy, by knowing the base doc/cond type. If we know the standard base doc/ctype, I thought it would help me quickly recall the behavior.
Thanks.
I think I can mark this question as answered. Though I wonder why a provision was not made for this. But anyways thanks to you all. -
Enter condition type several times in a sales order
Hello Gurus,
I have a Pricing Procedures with net price minus some discounts and sales price. This is standard. One of the discount condition types you can enter manually in a sales order. Now my problem. This discount condition type you can enter several times in a sales order. How I can solve this for one time enter.
Regards
ArturYes, it is a standard behaviour only, you can only control with User exit only. Include MV45AFZZ , co ordinate with your ABAPer for the same.
Regards,
Ramesh -
BAPI to change Billing document for output type
Hi Gurus,
I need to know if there is a BAPI to change a Billing document SD to add a new output type.
Thanks in advance.
Mariano.Hi all,
To be more specific, my requirement is determinate a new output type in the billing document if other output type already was printed, so as I can't determinate automaticaly the output type by standard I need to create a program to insert an output type in the billing document if other one was printed; for that I need to know if there is a BAPI to change the billing document to insert this new output type.
Thanks,
Mariano.
Maybe you are looking for
-
Hey i just got a copy of windows vista but it won't install. i tried to install it using bootcamp but it asks me to start installing on a existing windows. i don't have any windows installed on my mac book. Do i have to install windows xp before inst
-
What cables do I need to hook up my vcr to a minidv
Hi, I want to take my home videos (currently on vhs tapes) and transfer them to my mac mini computer so I can create dvds using imovie and idvd. I have the Sony DCR HC32 minidv (that has the "pass-through" feature). What cables do I need in order to
-
VBS logon script and AppLocker
Hello I have setup applocker with "Automatically Generate Rules" for "Script Rules". When i try to execute a vbs logon script from a GPO it fails with the error below. Execution of the Windows Script Host failed. (This program is blocked by group pol
-
Dump while transferring asset through Tcode ABT1N
Hi I am facing an issue wherein asset transferred from one company to another through t-code abt1n. After simulation and save the runtime error is: Runtime errors COMPUTE_BCD_OVERFLOW Exception CX_SY_ARITHMETIC_OVERFLOW I have searc
-
hello, I'm trying to write a program that should be composed of two kind of parts: a kernel and some separate packages the cooperates with the kernel. These packages should contain text, images, sound and classes.. because every package behaviour is