In bios under freq/voltage controls it reads this...

MCP65 to AM2 auto = disabled
MCP65 to AM2 freq = 800
What does this mean?

Quote from: RGN07 on 19-January-08, 08:42:24
Should it be enabled to "auto?"
If you use stock PC parameters(without OC), leave it to Auto.

Similar Messages

  • MSI 785GTM-E45 BIOS CPU fan voltage control

    Hello MSI gurus,
    I've replaced the MB in an older HP media center with the MSI 785GTM-E45 running BIOS V8.8 out of the box.
    CPU = Athlon 64 X2 4200+
    My problem is the stock CPU fan has a 3 pin connection (voltage controlled) and is running at 100% speed all the time.  From what I've read on the forums there are a number of people that have this issue (with other MBs with 4 pin cpu fan headers) and don't want to switch to a 4 pin CPU fan (PWM controlled).  I am in the same situation.
    I am hoping that there is a BIOS for this board that has an option to switch to or enable voltage control on the CPU fan header.
    I have tried enabling the CPU smart fan target but no matter what settings I chose the fan remains at 100%.  The H/W monitor of the MB indicates a CPU temperature (33C) well below the target (tried all options from 40C to 60C in 5C increments). 
    I have tried MSI's dual core center and it had no effect on the fan speed.
    I have tried the 3rd party freeware SpeedFan and if had no effect on the fan speed.
    I am not able to check if I have the latest BIOS or even find changelogs for existing BIOS verions because MSI seems to only direct BIOS downloads for this product to the Live update application.  I have installed the live update program and it indicated V8.8 was the most recent veriosn of the BIOS for this board, although I have seen posts indicating the Live Update application is not to be trusted.
    Dual core center, SpeedFan, and Live Update have all now been uninstalled.
    I know the fan I'm using will change speed because I can connect a 3 pin fan controller and manually dial down the speed.
    I know the BIOS can read the fan speed becase it correctly shows the RPM changes when I use the hardware fan controller.
    Can anyone direct me to a BIOS version for this board (or some secret keystroke) that enables automated 3 pin voltage control on the CPU fan header?
    Thanks in advance for your time.

    For those who are interested I received the following answer from MSI technical support.  Personally I find this to be a flaw in this board's design.  I chose this MB to replace a dead MB in a HP media center for a friend.  If I was buying this board for myself I likely would be using it as a HTPC because of the mATX form factor, HDMI on board, and backward compatibility for CPUs.  However, due to the added cost of purchasing a new heat sink and fan I would be RMAing if I had bought it for myself.  Considering many of the top performing after market coolers still come with a 3 pin fan it was a poor decision for MSI to not include support for automatic speed control of a 3 pin voltage controlled fan.
    Quote
    Dear Sir/Madam,
    Thanks for contacting msi technical support team!
    We are sorry that because of the circuit designs,we could not add cpu smart function for 3 pin's connector fan in the BIOS. The difference between 3pins and 4pins is that the second has a temperature controller but the first does not.We would suggest you utilize a 4-pin CPU Fan in order to control the CPU Fan speed.
    Sorry for any inconvenience caused you!
    Best regards,
    MSI Technical Support Team

  • Low voltage radings? read this 1st

    I was concened about a problem with the rig in my sig, I had a low 12 v rail of 11.43
    so the brand new shiny 600w PS I just bought , or so I thought, was at fault, so I pop in my old trusty Antec 550 True control , same problem.  
    humm what is up? I bring home from work my good old trusty DVOM and check voltages on the molex connectors with the system powered up, now I get 12.35 and the 5V rail was 4.99
    so before you run out and get another PS best check it 1st , might save you some bucks!
    I emailed MSI about the issue , so we will see how that goes

    this issue goes for most motherboard out there.
    its partly because they use cheap parts.
    a cpy temp can easily be 20celcius off.
    also some programs shows wrong from time to time so always check in bios.
    and 11.4 is borderline.
    5% -+ on 3.3v 5v and 12v rails is within acceptable.

  • Bios for KM2M, no voltage control

    While there is a frequency and voltage control section in the bios, all you can change is the FSB  ;(  The title of the section indicates there could be that control. Is it there but disabled so we can't mess with it ?  No, No, I don't want to Overclock!!  :D   Any hacks for this ?  I also tried fuzzy logic but it just sat on the screen doing nothing no matter what i did.  So all I can do is bump the FSB. I hit a wall at 2133 or so (Proc is a XP2400+)
    Smagma

    Sorry, going to the bios forum
    Smagma  :D

  • 270X voltage control, AB 3.0.0 b18

    Hello,
    I have a brand new R9 270x Hawk running catalyst 13.12 and the newest Afterburner 3.0.0 Beta18. The Hawk claims to have triple voltage control, but I cannot seem to get Afterburner to give me the option to adjust the voltages even with voltage controls set to unlock.
    Does the card need a bios update, or is there some other way to unlock the voltage controls on the 270x?

    I guess no one has any insight into this topic.
    In the mean time, is it possible that there is a new UEFI/GOP bios for this card?
    It is R9 270X Hawk (912-V303-004)
    Display device       : MSI R270X HAWK on Curacao GPU
    Display driver       : 9.14.10.01001, Catalyst 13.12
    On-board memory      : 3840MB
    BIOS                 : 015.041.000.000 (.002887)
    GUID                 : VEN_1002&DEV_6810&SUBSYS_30331462&REV_00&BUS_1&DEV_0&FN_0
    the bios rom is "150118.rom" dated 10/07/2013.
    I have full access to the voltage control for the MSI R7870 TF/OC that is in crossfire with the Hawk. *The Hawk is the master card.
    I'm also confused as to why the 270X is reaching 80C+ under gaming load at stock voltage/frequencies, while the 7870 with voltage cranked up to 1.256 and frequencies at 1220/1400 only reaches 56C under the same load. I thought the two cards were based on the same design, and if anything, the 270X would run cooler with the Twin Frozr IV cooler and added heat plate???
    ^ The reason I ask about the heat level is that the many reviews of the card I read before I purchased it had it maxing out at 60-65C under gaming load, similar to the 7870 TFIII/OC. I wonder if the fan controller on the card is not working properly.

  • NB voltage control not working

    I'm on a 790XT-G45 (2.5 BIOS although I have tried other BIOS') which supposedly supports a 2600 MHz NB. There is nothing I can do to even get the board to post with a 2600 NB and raising the NB voltage doesn't seem to do anything either. If I can get into Windows (only sometimes) @ 2400 MHz NB, and then increase voltage through overdrive, it stays stable.
    So the question is how can I raise the NB voltage on this board? The BIOS setting that raises NB voltage in conjunction with HT link doesn't seem to really do anything.
    Otherwise does anyone know a way to get Overdrive to allow you to change the NB multiplier so I can just overclock it in Windows? I'm not happy with a 2400 NB and even worse it hardly will ever get into Windows with stock voltage and this frequency so really I'm stuck below 2200 MHz.
    Should I RMA the board?

    Quote from: wlahdone on 13-February-11, 21:31:36
    I have opened up AMD Overdrive ,Enabled Advanced ,Clock voltage andi see CMOS Items-> CPU NB Multi and NB Vid present ,but i presume you need to enable ACC to change them.I did not play with this values though.I have never gone to more than 2400 M with my CPU on any motherboard with mild voltages for the NB.But either the BIOS menu would freeze either Windows freezes.There is an increase in the speed games are loaded but thats it .I doubt you can achieve more on another motherboard.You are beating a dead horse in my opinion.Do some CPU clock overclocking better with a proper cooler.Try a 1T timing for RAM and you will get more on the memory performance side.
    I have all those enabled and I still cannot access the cmos items section. Can you tell me specifically what you have set? I can adjust NB VID under the voltages section but I cannot adjust the mutiplier in the CMOS items section.
    MANY, MANY users are reporting having ABSOLUTELY NO PROBLEMS getting a 2600 MHz NB-CPU frequency, and many are pushing that easily to 2800 and even 3000 MHz. According to AMD themselves, (http://sites.amd.com/us/Documents/AMD_Dragon_AM3_AM2_Performance_Tuning_Guide.pdf, scroll to the bottom), you can expect 2800-3000 MHz on the NB link, with 1.35-1.5v - basically you can run your NB voltage as high as your CPU.
    As far as overclocking, I am pushing 4.2GHz, on high end water (CPU & GPU) and I have added MOSFET coolers to the board so I'm pretty sure I'm good. Regardless I would like to push the board as far as it will go, and even at stock frequencies, and two different CPU's, I cannot get the NB frequency stable above 2300 MHz or so. Look it up, people are reporting better performance with a higher NB frequency, especially with higher clocked modules and overclocking.
    All I'm expecting this board to do is what all the other boards can do - to be able to increase the NB frequency to at least 2600 MHz. If I am beating a dead horse, it's because MSI users have given up and accepted lack of support as a status quo. It would probably take no time at all to add a NB-CPU voltage adjustment to the BIOS. And yes I have contacted them so we'll see what happens. If this board is supposed to support up to 5200 M/T, then I would like to see it.

  • MSI G31TM-P35 voltage control?

    Hi, I'm wondering how do you up the voltage of anything on this motherboard? I thought this motherboard came with voltage control built in but I guess I was wrong. I'm trying to achieve a stable overclock with this board.

    Quote
    So is there a way I can shoestring voltage control from another BIOS for another motherboard with a similar chipset into a BIOS for this motherboard?
    Unless you are an experienced BIOS modder with expert skills in handling assembler code the answer is likely to be "no".

  • Unlocked Voltage Controll

    Hello.
    I've got MSI GTX 670 PE and I'm using MSI Afterburner ( 3.0.0 Beta 9 atm. but with 2.2.3 and other versions I've got the same problem ).
    The voltage controll is unlocked, I'm able to controll mem voltage, I got +745Mhz ( 3746Mhz total ) mem to work on +50mV.
    Actualy this is the only unlocked voltage that works. Changing Core and Aux Voltage has no effetc ( either -100mV and +100mV, the readings are same all the time ).
    Actualy I got +70Mhz ( 1320Mhz total ) set on it with +0mV but as I said voltage dosen't work.
    I'm wondering how to fix it, maybe its coused by my BIOS ? I'm using 80.04.4b.00.47 which is default for my card.
    Also, I'm using driver 314.22.

    The vbios of most GTX670 PE are limited to 1.175v max due to Nvidia dictating that when production started. Aux voltage increase works but you can't monitor that with software.
    Check this thread: gtx 670 power edition OC unlocked bios?

  • MSI Afterburner - MSI 7850 Voltage Control

    When will afterburner support voltage control for this card? We're able to unlock voltage control in options but still not able to change the voltage control in afterburner. Other mis 7970 cards can use it fine, not this msi 7850 though.

    Hi again
    I have been doing some further testing today, using the AMD Catalyst drivers v12.8 and MSI Afterburner v2.2.3.
    THE MSI R7850 Power Edition 2GD5 card appears to have two GPU core VDDC voltage states as standard, 0.82v for 2D clocks and 1.21v for 3D clocks.
    I have confirmed this using GPU-Z v0.6.4 (managed to get it to display current VDDC correctly at last) and AIDA64. For some reason , Afterburner lets it appear that you are changing the VDDC voltage (once the unlock voltage options are ticked in settings).  Afterburner shows a core default VDDC of 1075mv when first installed which doesn't tally with what is actually the current 3D clock VDDC voltage of 1.21v. Even sliding this to 1.1v or 1.3v (the maximum) has no effect on the VDDC or 1.21v. The Afterburner OSD will always display what the voltage is set to on its own slider,  even if sensor output still shows the actual 1.21v.
    Now, this is where it gets interesting. I installed the Sapphire Trixx application which as you probably know, is similar to Afterburner. Right at the start, it was displaying the adjustable core VDDC voltage as 1.21v although the slider would only let me decrease the voltage. I believe that this is due to Trixx having  a VDDC limit of 1.18v.  To test Trixx, I reduced the core VDDC to 1.1v. This core voltage adjustment was successfully reflected in MSI Kombustor, AIDA 64, GPU-Z when running 3D..
    Strangely, this means that the Trixx application will let me adjust the volatge on MSI Power Edition  GPU core, albeit only to down volt from 1.21v where as the MSI Afterburner app does not adjust  the core voltage at all, despite the fact  that on the surface, it appears to work, letting you select core voltage 0.82v all the way to 1.3v. The 7850 states that it is triple overvoltage enchanced but Afterburner will not bypass the hard coded MSI BIOS voltages.

  • Do I need to put these .pxml files under the source control?

    I use Jdeveloper created portlet consumer. after I run it in Jdeveloper, there are lot of .pxml files generated as metadata.
    Do I need to put these .pxml files under the source control? or they will be generated at run time?
    Thanks

    Yup. Keep your mds folder under source control as well.

  • Reboot Window 7 and Voltage Control in Afterburner is gone (N460GTX)

    after i got my MSI N460GTX HAWK card and i use MSI Afterburner 2.0.0 with Driver 260.99 i haven't tried older or newer driver but when i reboot my Windows 7 Ultimate x86 my voltage control is gone and i have to unclick them, restart Afterburner, click them restart Afterburner and i can adjust them again, i was wondering if it's Afterburner or card (Software or Hardware) problem?

    Quote from: Henry on 27-November-10, 06:47:20
    Do you have it set to apply at system startup? Do you have a saved profile for it to startup on? Do both and it will apply your settings each time you cold start or warm re-start your PC.
     Edit: Where I have it underlined in red, click on the little green button on the left to apply at startup.
    This is not related to voltage unlock setting
    Quote
    click them restart Afterburner and i can adjust them again, i was wondering if it's Afterburner or card (Software or Hardware) problem?
    Software issue for sure.

  • MSI 7950 twin fozr has no voltage control

    Is this card supposed to have voltage control for the memory?
    I can change the core voltage fine. Gpuz and afterburner graphs shows the correct core voltage. But when I change the memory voltage sliders and hit apply, gpuz and the afterburner graphs don't change from default 1.6
    I think this card is supposed to have memory voltage control because the vrm model number allows it and afterburner is showing me the memory voltage sliders.
    But I can't get it to work. Any help?

    Interesting.
    The reference 7950 and 7970 boards using the chl 8228 voltage controller do have memory voltage control.
    The 7950 card I bought uses the 7970 ref board design with chl 8228 controller.
    So the card does or should have the capability based on the hardware. But if you disabled it on the software side to differentiate your product line, that is fair and I can live with that.
    But if you are saying the hardware does not support it, then I think something is not right.

  • What is voltage control mode in MSI Afterburner?

    Hi, I have a reference GTX 970 and am wondering what the difference voltage control modes are in my afterburner settings.I have the option between reference design, standard msi. and extended msi.
    Which should I use, and what's the difference between them?
    Cheers,
    Ben

    Standard msi is for normal msi graphic card and Extended msi is for like msi Lightning kind of cards. Extended mode sometimes opens up some settings just for those cards. But basically they are the same.

  • Gtx 680 lightning voltage control where is it

    Bought a 680 lightning been waiting almost a month still no voltage controll tripple over voltage or tripple temp support for msi after burner eta of release date how can u release a card and the software a month later.....

     All I have to say about the BS is this:
    Quote from: sam350;4366409
    the reply i got from msi about voltage control
    « Reply #1 on: Today at 09:11:58 »
     What version Afterburner have you been using?
     Perhaps you should also check with the Afterburner support forum.
    http://forums.guru3d.com/forumdisplay.php?f=55
    sigh they allways give the same boring response...im not stupid ofcourse iv got the latest drivers feel pretty ripped off by msi atm u cant release a product without the software..... its false advertising.......box say supports tripple overvoltage......but it doesnt yay......
     I am the moderator at the MSI "User to User" forum that gave that reply to him. I am a user of MSI products as are all of the mods over there and none of us are paid by nor employed by MSI. MSI does not write the code for Afterburner as you all should know and for him to come here bashing MSI & their support forum is uncalled for. I respectfully request that this MSI bashing post of his be removed as well as my reply.

  • MSI Z97 XPower AC - 4 pin fan headers - PWM or voltage control?

    The instruction manual states that the 2 CPU 4-pin fan headers are PWM control rather then voltage control.  The rest of the 4-pin fan headers say "NC" on the fourth pin.  Does this mean that the fourth pin has "No connection" and that they use voltage control of the fan's RPM? If so, this seems like a big oversight not to have PWM control on all the fans like another well known motherboard manufacturer.
    My second question is...  does this motherboard control the fan speed by using variable resistance to the fan headers or produce variable voltage?  The following FAQ copied from Noctua's website states that there is a difference and the fans may not operate properly if used with resistance based fan control rather then the MB actually producing variable voltage.
    Can Noctua industrialPPC fans be used with fan controllers and resistor cables (Low-Noise Adaptors)?
    Noctua recommends not to use industrialPPC fans with common PC fan controllers, resistor cables (Low-Noise Adaptors) or other devices such as potentiometers that work by applying (variable) resistance rather than actually generating different voltages such as a laboratory power supply does. Due to the higher internal resistance of the industrialPPC fans’ three phase motor, applying additional resistance will cause the fans not to start (e.g. with Low-Noise Adaptors) or to have high starting speeds (e.g. with most common PC fan controllers). Please note that the industrialPPC fans feature starting voltages between 5.5V and 6V and can be run at these voltages on devices such as laboratory power supplies or mainboard fan controllers which actually generate lower voltages rather than applying resistance. Noctua thus recommends to use either PWM or voltage based mainboard fan control or laboratory/industrial power supplies for controlling the speed of industrialPPC fans.

    Indeed only CPUfan 1 + 2 are PWM controlled according to the manual. Also yes, NC means not connected on the other headers what is why speed control is shown among the three pins left. That of course means that voltage control is used for these headers.
    Controlling speed with resistor between power (12v) and fan is an aftermarket solution while on mainboards the voltage applied to the header is already of the voltage needed for control (generating lower voltages than 12v). So also in case of your board the lower voltage is generated and not lowered later on.   

Maybe you are looking for