In BO 6.5.1 BO(DeskI) report Large Amounts are truncated/devided by 100

hie all,
we are using BO6.5.1 SP2 on windows
DB:Oracle10g.
In BusinessObjects(Desktop Intelligence) report i am facing this problem.
"small amounts is showing correct values and for large amounts are incorrect. In the sense if the amounts are large like billions and trillions then the division by 100 is happening.
Case 1 - Amount is large:
OPEN_DR_BAL shown in BO 9,353,578.00.
OPEN_DR_BAL found in DB 935,357,840.00.
Case 2 - Amount is small:
OPEN_DR_BAL shown in BO 680,000.00.
OPEN_DR_BAL found in DB 680,000.00.
In the third case below here we find issue of rounding of decimal.
Case 3 - Amount is small:
OPEN_DR_BAL shown in BO 86,735.70.
OPEN_DR_BAL found in DB 86,735.77.
Pls share ur experiences in resolving the issue.
Advance Thanks...

Double check your regional settings, test same behavior with 6.5 SP4 .

Similar Messages

Error while scheduling DESKI report in infoview

I m scheduling a DESKI report to users enterprise inbox from infoview using a server group. This server group has DesktopIntelligence Job server, Destination Job server, Adaptive Job server and Program Job servers and all these servers are running.
When I schedule the report to boldusers enterprise inboxbold it get failed and shows this error message
bolddestination DLL disabled. []: [CrystalEnterprise.Smtp] bold
I m wondering what has to be enabled for scheduling a report to infoview's own inbox.

Abhilash
You are correct that it shows all the prompts but only when we run the report either directly from the CR Designer or via View on Demand in Infoview/CMC.
But if I try to schedule an instance of this report, I am getting a check box in the parameter section which says "Show unused parameters" to see this dyanamic prompt. And When I check that box in Infoview still I am not able to select any value for this prompt as it's greyed out.
Hope I am able to explain my query to you.
Also attached a screen shot of the scenario for your reference.

Output same Deski report as PDF and XLS

Hello,
will it be possible to generate (not schedule) a Deski - Report using Java SDK ?
desired workflow:
- generate/refresh the report to hold new data (User specific, Local specific)
- output this report in Formats PDF and XLS
- store the output - reports in Users inbox
The goal is to generate the report only once and output the same twice - as pdf and as xls.
As far as i saw in scheduling a report, it is only possible to produce one output (pdf or xls), if we need both, we have to schedule twice. And therefor we will have to generate the same report twice.
I found somthing like
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.XLS);
binaryView = (BinaryView)documentInstance.getView(OutputFormatType.PDF);
in RBean for Webi - reports.
Looking forward for any idea.
Thanks in advance.
Johannes
Edited by: Johannes Kammerer on Sep 15, 2009 4:55 PM

If you're on XI 3.x, then you can specify multi-format exports using Publications.
Otherwise, you'd need to export to a file using REBean SDK, then Enterprise SDK to create a new InfoObject for that artifact.
Sincerely,
Ted Ueda

Is it possible to use the JAVA Report Engine SDK to modify DESKI reports?

Post Author: Nadine
CA Forum: JAVA
Hi, is it possible to add a complex filter to a DESKI report using the JAVA report engine sdk?
In the developer tutorials for this API, I've only found references to WEBI in terms of modifying reports, though it seems to be possible to view DESKI reports with this sdk.
I am a bit confused in terms of the scope of this API and how I would use it in regard to DESKI.
Many thanks for any suggestions!
Nadine

Post Author: Ted Ueda
CA Forum: JAVA
Current (XI R2) version of ReportEngine API only supports refreshing/viewing functionality for Desktop Intelligence documents. Document modification/creation is only supported with Web Intelligence documents. Queries aren't modifiable for Deski using ReportEngine API - you can only do so using Desktop Intelligence Reporter SDK, which is COM based.Sincerely,Ted Ueda

Row Level Restrictions on DeskI Report not working under InfoView

When running/refreshing DesktopIntelligence XI r3 (Full Client) reports under InfoView, the row-level restrictions applied in the universe are not being included in the SQL (additional filtering is NOT happening). However, if a user creates a report using the same universe in WebIntelligence or if the user runs the same report in DesktopIntelligence, the row-level restrictions are working.
It strikes me that the problem has to do with security rights granted (or not granted), but I can't figure out which settings would allow the proper running of a DeskI report under InfoView.
Thanks for any assistance rendered!

Mike,
Do people connect to Infoview and Deski using the same authentication method and the same username?
How does this compare to how your data restrictions are configured?
Are you using @Variable('BOUSER') restrictions? Have you taken domain into account e.g. "Domain\UserName" vs "UserName"?

Red Blue issue with published DeskI Report in InfoView

Hi everyone,
i'm expieriencing a strange behaviour with my published DeskI Reports.
I'm using logos in my report and they work just fine... in my full client. As soon as I publish them to InfoView and open them up in the browser, then somehow the color red and blue interchange. Red becomes blue and vice versa...
My System consists of:
BOE R 3.1 SP2
Win Server 2008
DeskI and WebI
Has anyone expirienced the same issues?
Thanks and kr,
Nils

Hi Stratos,
so far everything is just fine. Hope you are doing great too.
my IE version is: 7.0.5730.13
Tomcat version: 5.5.20
If I click on the logos in InfoView, nothing happens.
I tested 3 different ways to implement them:
1) via link; pictures shows up, but again with the red blue issue
2) as an object; pictures shows up; also w/ the red blue issue
3) inserted a cell, and pasted the picture in it, pictures shows up; also w/ the red blue issue
The strange thing is, that this issue only appears in the browser.
Thanks,
Nils

Not able to save deski report as PDF through infoview

Hi,
when I try to save a deski report as PDF through infoview error appears as:
Your request could not be completed because a failure occurred while the report was being processed. Please contact business administrator.[RCIRAS0546] (Error: INF)
we are using BOXI 3.1/ SP2.
Please let me know the possible solution for this.
Thanks
DLN

Are you migrated from earlier version to 3.1.
YES,
here you go,
Have a back door way to fix the problem...
We were having the same issue with DeskI documents while upgrading from XIR2 to XIR3.
It's tied to documents that are set to Refresh on open
If you import the report, set it to "not" refresh then publish it, test it and it should run fine. Once you get it working correctly you can republish the report again and turn the "Refresh on Open" back on.
It should work fine from that point on.
Thank You!!
Sent from iPhone
Edited by: BOCP-BOE on Oct 19, 2010 12:01 AM

How to view deski report in html format ?

Hi,
I use BO XI R2. I use jsp.
I just want to know how to view deski report in a html format.
thanks a lot.
hatoug

Since you're using JSP, please post to the Java support forum:
Java SDK Application Development
or
SAP Crystal Reports, version for Eclipse

TimeoutmexpiredState: HYT00 error while refreshing Deski Report

Hi All,
I am tryting to refresh a deski report and get the following error:
Error during SQL execution: (DA0003): Exception DBD, [Microsoft][ODBC SQL Server Driver] Timeoutexpired state: HYT00] The following data providers have not been successfully refreshed: QUERY with CONNECTION. (DMA0007): (Error: INF)
The report has prompts e.g Regions. When I select Region 1 the report runs fine, but when I select Region 2 this error occurs. I presume this region also has a lot of data and could take a couple of minutes to run.
I have tried analysing the universe and add index's to the database tables to try and speed up the query process - but no luck.
Has anyone seen this or been able to resolve this...
Many thanks
Jacques

This is scary... Google just returns 2 results and they are not much use either..
But anyway, I went all the way... and so I shall post the results.
Firstly, I tool the SQL from the report and ran it in query analyser to see the query execution plan. Where I could detect high query cost, I created index's on the tables where appropriate.
Futher, I incorporated the physical tables instead of using views from the database (from my legacy developer)...
And finally, I recreated the report to iron out the objects/tables that make the report run slow when added.
A lengthy process - most probably not the best, but at least the report runs and no timeouts occur.

Unable to run Store Procedure based deski report in Infoview

Hi All,
I have a Deski report which is created using Store Procedure. I am able to run report in Full Client Deski. But I am unable to run / schedule same report thorough infoview.
More details about report
- Report uses 3 store procedures. When I ran report in infovew I get error message as "SP2 Dataprovider did not refresh properly". -- SP2 is Dataprovider name.
- Same report I am able to run in Dev environment. After migration to Model, report fails to run in model infoview.
- I am able to Run report only for 1st. When I refresh and run with same parameter report shows error.
Any input will be great help.
Thanks,
NV

Hi,
Could you please test the following solutions to resolve the issue.
Solution1:
Test the issue by inserting the following parameter in .SBO file.
<Parameter Name="Force SQLExecute">Always</Parameter> .
Solution2
Just put SET NOCOUNT OFF in the end of the stored procedure SQL.
If the above doesnu2019t works then please try the following solution.
Solution3
Make the new connection from the scratch using ODBC connection and test the issue.
I hope this will help you.
Regards,
Sarbhjeet Kaur

Large DeskI report in Infoview

Hi,
I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
Please advice.
Regards,
Hitesh

Hi Hitesh,
Following information might help you to resolve the issue.
Issue might be related to timeouts on the connection server.
                                                                                Please login into CMC and go Home>servers , locate Input and Output File servers and modify timeout of each to be 60 minutes. Default is 10 mins
This 10min default value can be modified in the registry as well:
HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suit 11.5\File Server\Instances\input.<machine name>
There is a registry key called u201CServerMaxIdleTimeu201D. Modify it and change the decimal value to 90 (default is 10, max is 90).
After this change is made, please restart CMS and FRS servers and test same again. Please let me know the results.
Regards,
Sarbhjeet Kaur

(Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

Hi,
I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
Please advice.
Regards,
Hitesh

Hi Hitestwar,
Try these notes as well
1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
Or try to set logs on the server and check what is happening.
Thanks,
Vivek

Scheduling deski report to html format fails

We're running boxi 3.1 SP4 on a Linux redhat machine. When scheduling a deski report to html format to unmanaged disk, the report stays in processing state for 10 minutes and then it goes to failed state with error "Object failed to run due to an error while processing on the Job Server" . Additionally I get the message "The scheduler component failed the object identified by <jobnumber>. The job associated with the object was unresponsive."
Scheduling to other formats works fine. I have tracing on but there's not any hint in the logfiles. The htm file and it's subdirectories are created on the temporary location /data/procSched/<name>.DesktopIntelligenceJobServer but it's not copied to the configured destination. It is not an issue with permissions, the server has write permissions to the directory.

Hi Clive,
since your are in XI R2 you can only try to modify the layout of your report. In XI 3.x a new feauture was introduced, which allows the user to choose between keeping the layout or facilitating further processing in Excel when exporting a document in Excel.
Regards,
Stratos

Export to excel using deski report

Hi,
We are using BOXIR2 SP4 version. We have a deski report that generates excel output file and it was working fine until yesterday. Today that report successfully exported excel output file, but I was not able to open excel file and it gives me below error:
Excel found unreadable content in 'abc.xls'. Do you want to recover the contents of this workbook? If you trust the source of this workbook, click Yes.
Now, if I select Yes, then it opens blank sheet.
I found that today there was a new record in the report for new customer. When I filtered out that customer record it works fine. So I thought may be something wrong with that customer.
After that I filtered out 10 existing customers and then also I was able to open excel sheet with new customer record as well. So, I tried few other things to resolve the issue, if I reduce the length of Customer_name field from 35 to 30 by using SubStr(), it works fine. If I add a new field Customer ID to the left of Customer_name field, it works fine.
This is a strange issue. I have suggested our client the above option that have worked. But if client is not OK with it, I will still have to find the root cause and resolve this issue.
Please advise.
Thanks,
Nikhil

with your product version there are little options you have.
1. Upgrade to the latest SP and patch on XIR2 (SP6, fp6.4) and re-test
2. Upgrade to current product release.
3. figure out what has changed and how in the report and reverse those changes.

Designing a deski report

Hi All,
Need help in designing a deski report
I have two variables;month and year.these two are database objects. month has values(1,2,3....12).And year has value 2007.
Now i want to change this to a single variable which will give the value as jan,2007.
Is it possible. Please help need this report very urgently.

JK,
If you want to solve the problem in the report itself you need to create a variable with the following formula (assuming that there is only one value for year and the type of year is a number)
=If <month>=1 Then "jan,"+FormatNumber(<year>,"0") Else If <month>=2 Then "feb,"+FormatNumber(<year>,"0") Else If ......
Note: the variable is a character and will be sorted as character so apr will come before jan. You can solve that using custom sorting.
Cheers,
Harry

In BO 6.5.1 BO(DeskI) report Large Amounts are truncated/devided by 100

Similar Messages

Maybe you are looking for