In BPM sync/async Step , can you have different message schema?

Scenario:
File to XI to BPM to SOAP to RFC
In order to trigger the webservice , I use a dummy file which will be polled at a certain frequency- once in 30 minutes in Test mode - this will call the Webservice. The answer of webservice is sent to RFC Async.
so these are the Repository objects I created :
1. File Outbound Async Message Interface- Output Message (File_Request_MT)
2.File Abstract Message Interface-Output Message (File_Request_MT)
3.Async/ sync bridge Abstract interface to call the Webservice
4 Webservice Inbound Sync Message interface- with both input and output message
5.RFC Inbound Async message interface- input message (RFC_Request)
6 RFC Abstract Async Message interface-input message (RFC_Request)
BPM
a) Receive step which uses the the object 2.
b) Sync send which uses object 3
c) Send step which uses Object 5
I am using a BPM to Receive the file data/ "request " by using the File abstract message interface
Then use the the object 3 to call the webservice in BPM .
My question is on this step
Can I have for the abstract Interface(Object 3) the Request message as File_Request_MT and
response message as (RFC_Request) ?
I use a message mapping to map Input and Ouput message of Object 3 with Object 4.
Thanks for your insight

Raj,
Thanks for the feedback , but I have a question regarding your reply
Interface Objects
Object 1: File_Request_Abs
Object 2: Soap_Response_Abs
Object 3:Soap_Abs_Synch
Output Message:File_Request_Abs
Input Message:Soap_Response_Abs
Object 4:Rfc_Request_Abs
The question is about
a)SOAP_RESPONSE_ABS : could you please tell me why do we need an abstract interface -SOAP_RESPONSE_ABS?
I created a message type MT_SOAP_RESPONSE and used that in the BPM sync Send step as the Input message.
b)Soap_Abs_Synch- I am using message types
MT_File_request and MT_SOAP_Response From your reponse, it looks like you are suggesting to use
Abstract Interfaces as Output message and Input Message, am I correct? Could you please tell me whether this has advantages over using message types MT_file_request and MT_soap_reponse? I haven't used Abstract interfaces before as Input message and output message; infact, I wasn't even aware that it can be. Please confirm that it is possible. Thank you for increasing my knowledge !!!
These are the Objects I created
Message Type :
a) MT_Filerequest
b) MT_SOAPresponse
Message Interface
a)MI_Filerequest_out_async -
Output message
Mess. type MT_filerequst
b)MI_filerequest_async_abs-
Mess. type MT_filerequst
Used
i) used for BPM receiver step- container definition
ii) receiver determination
c)MI_webservice_sync_in - This is created from External definition
d)MI_webservice_sync_abs-
Input message - MT_soapresponse
Output message- MT_fierequest
Used:
i) used for BPM sync send step ,
ii)Interface mapping between MI_Webservice_sync_in and MI_webservice_sync_abs
iii)Container element-SOAP_response
e) MI_RFC_async_out
Input message
RFC_Request(This is imported from RFC definition)
g) MI_RFC_async_abs
Input message
RFC_Request(This is imported from RFC definition)
Mapping
Message mapping
i)Filerequest_TO_SOAPrequest
Source: MT_Filerequest
Target: SOAPrequest(Got from External definition)
ii)SOAPresponse_TO_BPM_response
Source : SOAPresponse(got from External definition)
Target : MT_SOAPresponse
Interface Mapping
i)IM_BPM_TO_SOAP
Source Interface : MI_webservice_sync_abs
Target :MI_webservice_sync_in
uses following message mapping
Request : filerequest_TO_SOAPrequest
Response:SOAPresponse_TO_BPM_response
BPM container element
i)Receiver_container TYPE MI_Filerequest_out_async
ii)SOAP Responsecontainer TYPE MI_webservice_sync_abs
iii)RFC_Request_container TYPE MI_RFC_async_abs
BPM flow
Receive---->Send Synch-->Transformation----->Send Asynch
Receive -
> receiver_container
Send Synch -
> receiver_container(Request Message), Soap_response_container(Response Message)
Transformation -
> Source(Soap_response_container), Target(RFC_request_container)
Send Asynch -
> RFC_request_container
Thanks for your help!!!

Similar Messages

Can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

thank you for your reply, it is not very fair from apple, since for not using your credit card, you need to create a new account and if you do not have multiple e-mail working , you are stuck! thanks anyway

Can you have different passwords for mail account and ICloud?

Can you have different passwords for mail account and ICloud?

Yes - you want to go under Notifications, Mail. Set each acct the way you want.

Can you have different I cloud accounts on different devices. Like 4 phones with different numbers while keeping them all on the same I tunes account?

Can you have different I cloud accounts on different devices. Like 4 phones with different numbers while keeping them all on the same I tunes account? My family shares one I tunes account but it would be nice to be able to have a different I cloud for family member. Is there a way to do this. Because the I cloud part on the setting on the phone and I pad are greyed out on the phones so you can't change the user.

If they are greyed out then usually this means that the account is not validated on that device. The Delete Account button at the bottom should still work and allow you to remove the current account form the iCloud Section of Settings.
To answer your question, yes. There are four places you can use an Apple ID on an iOS device:
Settings > iCloud
Settings > Messages
Settings > FaceTime
Settings > iTunes & App Stores
The iTunes & App Stores is the only one you want to use a shared (family) Apple ID account. The other three you will want a unique Apple ID for that person to prevent info merging or messages getting shared, etc.
Using Different Apple IDs for iCloud and iTunes

Want to just have phone numbers on phone can you have different groups with and email group as well

Want to just have phone numbers on phone can you have different groups with and email group as well

The iPhone remembers information about previous contacts.
Complelely independently, you have a Contacts app with a contacts list. It sounds like your contacts list has 3 names on it. You need to add a few names.

Can you have different setup settings on one document?

Hello.
I'm new to In-Design. (I own CS5) I used it back in college to make a double page spread but have only returned to it now at University. I have to create a book and submit it, in print ready format. I've tried things out for myself but some things just confuse me.
Basically, I've created a front and back cover with a spine on a document. I am wondering if I can work on the same document with my book pages and have my book pages set up with different margins? (for the inner sides)
I've been working on a seperate document for the book, but I'd like to have it all in one file to submit for the project. I'm also looking at getting the book sent to some publishers afterwards as I've been advised to. I'm just having troubles with general set up.
Also, this isn't in the title question, but if anyone can answer another, I'd be very grateful!
My story has to be 16 pages. With an inside front and back cover as well as the main book cover, that's a total of 20 pages and 6 sheets of paper, right?
When I put in the other 18 pages, Pages 1 and 18 are seperate (non facing) pages. How do I make them print together? I did a test print and they didn't print like a double page spread... or is it that when it comes to properly printing and binding a book, pages 1 and 18 will join together?
I'm terribly sorry for the newbish questions. I have tried researching a lot but still got confused and it's my first time learning about publishing anything other than a single piece of paper.
Thank you
Natalie

Natalie,
You can create several master pages within one doc. There you can change the margins and lots of other things. Then you can apply these masters to your "normal" pages.
For the cover, I would advice to leave it apart, since you created a spine, but if your book is only going to be 20 pages the spine can be omitted. In this case, first page of your doc is the cover and the last page is the back.
It seems to me it's a saddle stiched booklet, so if "print ready" means imposed, you'll have to create a booklet. Make sure the complete book has 20 pages because if you print on both sides of the paper (let's say you made the doc on A4) the imposed booklet will be printed on A3 format (double A4).
gert

Firewall: can you have different settings for different network adapters?

I've got a mac mini that is visible on the open internet via a SDSL line / fixed IP. I'd like to lock down the connection as much as possible - in particular limit the ports to just those needed by the servers that sit on that machine. But I use VNC to control the machine on a day-to-day basis (it runs without monitor or keyboard). I connect the VNC client via our internal Wireless network - but to open the port for the VNC system I have to open the port for both wireless and wired adapters.
Is there any way I can set the OS X firewall to only open the VNC ports on the wireless adapter?
Thanks in advance for your help.
G.

i don think you can bind a rule to an adapter but you could fairly easily say i only want adress like 192.168.. to be able to connect to VNC or something like that and that way you can limit it to machines on the local subnet - you could also use an "or" statement to add a couple remotoe addresses if you need to.
http://www.hmug.org/man/8/ipfw.php

Can you have different spine text colour from main title in iPhoto '11?

I've created an iPhoto book which has a full bleed image on the front cover, white font for the main title and the whole book background is white. When I preview the book (using ctrl + click > Preview book), I see no title on the spine as both the font and background are white.... I can copy the text from the spine and see that it is there, just not visible as it's the same colour as the background.
So is there anyway I can set the spine text to be black with the front cover font remaining white?
Thanks.

Natalie,
You can create several master pages within one doc. There you can change the margins and lots of other things. Then you can apply these masters to your "normal" pages.
For the cover, I would advice to leave it apart, since you created a spine, but if your book is only going to be 20 pages the spine can be omitted. In this case, first page of your doc is the cover and the last page is the back.
It seems to me it's a saddle stiched booklet, so if "print ready" means imposed, you'll have to create a booklet. Make sure the complete book has 20 pages because if you print on both sides of the paper (let's say you made the doc on A4) the imposed booklet will be printed on A3 format (double A4).
gert

Can you have different colour modes in one image?

Hi all,
I work on magazines which are half grayscale and half CMYK. Problem is that I don't know what spreads will be on what pages until I get close to completion. So what I do is make two copies of each image, a CMYK file and a grayscale copy and I find this a bit time consuming and tedious. When I'm working in Illustrator I make a CMYK layer and a Grayscale layer in the one file and switch between the two in InDesign by using the layer options. Is there a similar way to do this in Photoshop? I've experimented with layer comps and using adjustment layers such as Black and White and Channel Mixer, but the file still contains CMYK information which isn't what I need for my grayscale pages. Is there a way to make an adjustment layer that just contains grayscale information?
Thanks

Sure. Use an RGB smart object in a container file that you switch between color spaces (CMYK > Grayscale > CMYK). You can create a droplet to convert the files for you, or call an action in PS on open files. Action a black and white adjustment layer being toggled on and off in the RGB smart object, for better conversion to grayscale.

Can you have different face time accounts when two iPads use the same iTunes account?

I use one iTunes account for all apple products but want to use face time. Can I set it up so when we are not together we can face time each other.

Yes. In settings, FaceTime, just add an email. Email acts as a phone number. When you place a call to the other ipad, just make sure it's to that email.

Can you have different versions of an app that you develop and submit, based on geographic region?

For instance an app in Europe having slightly different functionality than in America or the rest of the world? The reason being that parts of my app if used in Europe would require consent from the user (sending emails and such), whereas the same rules do not apply elsewhere. I do not eant to prompt for consent in regions where it is not necessary.

Apps & content are country-specific. So the developers do have a right to change the functionality if they wish.
But you may wish to check with the developer for support as the issue may be someting else.

Can you have multiple Rates within one Work Center with multiple operations

We have a work center called Pipeshop. Within the Pipeshop we have multiple operations such as Welding, Threading, Cutting, Grooving etc. Each of these operations have a different cost assoicated with them. How can you have different cost for these operations?
Thank you,
Loretta

Hi,
For this case you need to do following activities.
1 Create individual activity accoding to requirement, that will be used for costing.
2 Activity planning w r t work center. In this cost per unit is declaring.
3. Create Routing and modify the default activity type, w r t required activity type, suitable to operations.
Now Order is referring the activity type, refered in Routing rather than, work center.
Regards
Gururaja Hebbar

Can you leave a message, such as "if found call" on the lock screen?

can you have a message displayed on the lock screen, such as "please call blank if you find this phone"?? thanks

You could edit it in using PhotoShop/Paint and use that as your lock screen wallpaper.

Can you have two separate icloud accounts for two iphones that sync with the same imac?

can you have two separate icloud accounts for two iphones that sync with the same imac?

Welcome to the Apple Community.
Yes and no.
There is no issues at all if you use two user accounts on the mac, each can sync with one of the accounts.
If you are using a single user account, you can add the second account as a secondary account in settings > mail, contacts and calendars and you can then sync mail, contacts, calendars, notes and reminders from the second account, but not documents and data, back to my mac or photostream.

HT1766 can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Can you have multiple iPhones in the same iTunes account without overwriting each phones content?

Hi sandexpress,
As Ocean20 indicates, you want to make sure that you have automatic syncing turned off. In iTunes Preferences under Devices, make sure you have "Prevent iPods, iPhones, and iPads from syncing automatically" checked. Then connect each iPhone, and make sure that "Manually Manage Music and Videos" is checked on the Info page for each of them. Then go into each page for each device, and select what you want to sync to that particular device. (you would do this one device at a time - complete the steps for one of the phones, then connect the next one and do the same thing).
With this kind of setup, you can modify what will sync at any given time for a particular device once you have connected it to iTunes, but before you click on the Sync button at the bottom of the screen. If you want to change some sync options on a particular device, you would just go into the page you wanted to change (Music, Photos, Apps, etc.), make your changes, and then Sync.
If you do not have any changes, you can just hook up the phone and click on Sync.
Hope this helps.
Cheers,
GB

In BPM sync/async Step , can you have different message schema?

Similar Messages

Maybe you are looking for