In Bridge CS3, Camera Raw 4.4.1. doesn't open

I try to open ARW-files (RAW-SONY) by clicking thumbnails in Bridge CS3,
but Camera Raw 4.4.1. doesn't open. I have all the necessary plugins installed.
Camera Raw 4.4.1. only starts up by directly using Photoshop.
what can be the problem?

>Is too much asked if you send me the upgrate for Bridge
To be honest, yes it is :-(
The Bridge update is 58,9 MB and the PSCS3 upgrade is 170 MB
E-mail can only send attachments from max 10 MB. If you have an ftp-account you can sent me the log in using my e-mail adress that is under my profile (double click on my name). I can use the ftp route to sent them to you.
Since we are in the same country and I can reach the updates without problems I give you the direct links so you can try once more:
PSCS3 10.0.1:
International version main page:
http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
If you have so, the NL version Update:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3778
Bridge 2.1.1.9:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3813
You must have an Adobe Account but since you can answer in this forum you already should have one that you can use for it. otherwise create a (free) account :-)
Let us know how it went

Similar Messages

  • PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

      Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get Photoshop CS3  error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Adobe Bridge at all.  What am I doing wrong?

    Hey,
    Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
    1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
    2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs  with Bridge or PS CS3. 
    This method wont involve any additional software purchase now.. right?    Am I missing anything.   here?    Since my final output to my customers are JPEGs any way, wont this work?   Will I be at any disadvantage.   Am I missing anything.   here? 
    From: ssprengel <[email protected]>
    To: charles cash <[email protected]>
    Sent: Monday, October 6, 2014 9:49 AM
    Subject:  PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
    PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue  created by ssprengel in Adobe Camera Raw - View the full discussion  
    You can buy it from here:
    http://creative.adobe.com/plans
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: 
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. 
    Start a new discussion in Adobe Camera Raw by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • My Photoshop, Bridge, and Camera Raw in CS5 will not update. The update downloads and then says there was an error.

    I am not able to update any of my CS5 files. Especially, Photoshop, Bridge, and Camera Raw.

    Adobe - Photoshop : For Windows
    Adobe - Photoshop : For Macintosh
    Photoshop: Basic Troubleshooting steps to fix most issues
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Bridge and Camera RAW preferences not working

    I'm setting up a new Macbook Pro, late 2013 15", 10.9.2
    CS6 Production Premium, Also have Indesign CS6, LR5, Acrobat Pro 11. Camera RAW is version 8.4. Everything is up to date.
    Bridge and Camera RAW preferences are not working correctly. Bridge prefs related to Bridge display, e.g. color theme, text beneath thumbnails, favorite locations, etc.. all work fine. Bridge prefs open and close fine with no errors. "Double Click Edits Camera RAW Settings in Bridge" does not take. Photoshop launches to open Camera RAW regardless of whether this is checked or not. Camera RAW preferences will not open. Selecting "Camera RAW Preferences" from Bridge does nothing. Camera RAW seems to work fine hosted by Photoshop.
    I tried a new user with the same results.
    What's up with this? Anyone else seeing this? Solution?
    --David

    fixed it with this work around
    Camera Raw 8.4 | No metadata or Camera Raw edit

  • Corrupted RAW in Bridge CC, Camera RAW and Photoshop CC

    Hello,
    I am using up to date versions of Bridge CC, Camera RAW nad Photoshop CC and I have the following problem.
    - after transfer photos from Canon EOS 6D to computer thumbnails in Bridge seems to be fine
    - when I open file in Camera RAW file seem as below example
    - when I open file in Photoshop CC file seem as below example
    - when I open RAW in IrfanView image seems to be fine
    - I can open image in IrfanView, save as TIFF and in Bridge and Photoshop seems to be fine
    - the problem occurs randomly, about 5% of images from 500 images
    Do you have similar problem? Does anybody have any idea?

    The previews are ok in Bridge because it's just a preview jpg, not the actual RAW file.   I'm not sure why it would open OK in Irfanview.  I had a similar problem after a HDD crash and tried Irfanview with no more luck than any of the Adobe programs.
    Have you tried Adobe's DNG converter to see if you get the same result?  Is this a consistent problem, or just this one time?

  • I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files

    I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
    Any insight/wisdom would be much appreciated. Thanks

    When you try to open in PS what happens?
    In Bridge do you see icons or thumbnails?
    Will it open in ACR in Bridge?

  • Bridge cs5 camera raw 6.5 to 6.5 and new bridge cs6 preview problem

    Hi,
    when i actualize camera raw from 6.5 to 6.6 the preview can`t give me right preview after 1 adjustment in camera raw.Image apears like when we open it in camera raw and it last few seconds with the yellow exclamation mark.
    Months ago the only solution i found after several instals was to turn back to camera raw 6.5.
    Now im trying beta bridge cs6 and problem come back for me again.
    I use Nikon D3x with 14 bits ~49MB .nef files in Windows 7 64 bits.
    Is any one have same problem?And why only in 6.6 (and new camera raw 7.0) and not in 6.5?
    Thanks
    Arménio Teixeira

    Frau S aus B wrote:
    I use Bridge CS5 with camera raw 6.7.1 in combibnation with a canon 6D and a canon 5D Mark2. The raw files from the 5D are shown in bridge, the raw files from the 6D are not. There is just an icon. The camera raw add-on is the latest usable update for Windows, the canon 6d is listed as compatible. Has anyone an idea what to do?
    The Canon 6D id NOT supported by ACR 6.7.1. It was supported for the very first time in ACR 7.3 whch requires CS6 to run.
    Therefore you will never be able to open raw CR2 files from the 6D directly in CS5.
    If you do not plan on upgrading, you can download the free, stand-alone Adobe DNG Converter 8.3 (always use the latest version, it's not tied to your version of Photoshop at all), install it like any other application and then run it on each batch of CR2 files to convert them to raw DNG files that you can then open in your version of Photoshop and ACR.

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • Good color/contrast cs4 Bridge; in Camera Raw files are overexposed...

    flat, and color is distorted. When files are opened into photoshop cs4, they appear as they
    do in Camera Raw, awful.
    I have re-downloaded cs4 from the adobe site, but the problem still persists.
    Any thoughts?
    Thank you for all response.

    flat, and color is distorted. When files are opened into photoshop cs4, they
    appear as they
    do in Camera Raw, awful.
    Maybe you could specify your problem a bit more, not sure I understand it
    now. Maybe you can also deliver a screenshot of the file in Bridge?
    If you have a raw file (do you??) you can change this settings in Camera Raw
    to the desired look before opening in PS. Changes made in Camera Raw will
    reflect in Bridge, they should appear the same.
    If you have changed the default RAW settings they might also cause this
    problem but your originals from camera can also be wrong.
    Hence my question for a bit more explanation.

  • Using Bridge to Camera Raw to Open Image button also drop shadow problems

    I remember when I was working with RAW in PSE 8. I would be in Bridge looking at a pic and double click on it. PSE 8 would open in Camera RAW and I could play with the pic a bit, make some adjustments, then click on OPEN IMAGE. When I did that it would open in PSE and it would be in jpg format. With this PSE 9 and the updated Camera RAW 6.3, when I punch OPEN IMAGE I still have a picture labeled .CR2 which I think still means RAW. When I double click in Bridge the .CR2 pic shows as 8 bit depth. I can do a little more work on it and use SAVE AS. When I do that, the sample file name that shows is still in .CR2 format and I must change that to .jpg and then below change from PHOTOSHOP to JPEG to save my file as a jpg file. Is there something that I have to change in preferences to get it to open the image in jpg format when I hit the OPEN IMAGE button? Or, is this an "improvement" with RAW 6.3? Also, I seem to be having trouble adding a drop shadow (or any other effects) on jpeg pics. At least it doesn't show up on the screen after I apply it. I just recently updated to Camera RAW 6.3 and updated my Operating system on my iMac computer to OS 10.6.6. I emailed this request to my good friend with an identical setup on his iMac and he is having the same response when performing the above operations. Any ideas what the problem might be?

    Okay, previously you seem to have been using the bridge version of camera raw to edit your raw photos. That has many more options than the PSE version of the raw converter. (If you still have PSE 8, you can see the difference by using File>Open in the editor to open a raw photo for the PSE version of ACR, which works the same way in PSE 9.) In PSE's raw converter, you use the Open button, then save your photo in an image format in the editor. The Save button in ACR in PSE is only the DNG converter.
    Layer styles should work exactly the same way as in PSE 8. However, in any version of PSE a drop shadow, like a real shadow, needs someplace to fall, so unless there is empty space on the layer, it won't appear. Try creating text or drawing and simplifying a shape and adding a drop shadow. Does it appear then?
    Also remember that Jpegs won't let you save either layers or transparency when you resave the file.

  • DNGs produced from Hasselblad .fff files display a different image in Bridge and Camera Raw

    Lately, not sure when this started exactly, Bridge CC (and Camera RAW 8.7) are displaying incorrect DNG images!  Instead of showing the image I expect to see, I'll see an old image from days ago.  This seems to carry on from Bridge through to Camera RAW.  But then if I continue on to Photoshop with the image, it'll finally show the correct image. 
    I'm assuming this has something to do with DNG, because if I load another raw file type (like .fff or .NEF), it seems ok.  Also it seems to be ok with DNGs produced from other cameras like Nikon D90.
    My set up:
    - Mac OS X 10.9.5 (Mavericks)
    - Bridge CC
    - Camera Raw 8.7
    - Photoshop CC 2014
    - Hasselblad H4D-50

    HI, I managed to fix the trouble by reinsatalling once again and running updates BEFORE opening bridge. It seemed that if I ran the update AFTER opening bridge I would get either an up to date status when checking for updates or I would get an install failure notice on all 4 updates that were trying to install. The updates were for camera raw, bridge and PS. I can't explain why but that helped a little. I also changed permissions on my whole user accnt to include read/write for all users. I can't say if this helped or not. I also had to go into my camera B/U files on a sepate HD and replace some of the CR folders I was using o nthe desktop. Still the CR files would not show a thumb nor a preview till I then went to each individual file inside that folder and purged the cashe for that file so it could repopulate the cashe yet again. This has been the strangest few days in PSCS6 history! Well my personal history. I will report back here if more quirks emerge. I would prefer quarks though....aloha, U

  • Beim cs2 bridge geht camera raw nicht

    beim cs2 bridge geht camera raw nicht

    In Ergänzung zu Willis möchte ich anmerken, dass Camera RAW zu Anfang wirklich nur für RAW-Daten vorgesehen war (daher auch der Name) und deshalb keine Beabeitung von JPGs und anderen Dateien möglich war. Erst mit späteren Versionen wurde die Bearbeitung anderer Bildformate nachgelegt.
    Gruß
    Bernhard

  • CS5 not responding after opening Bridge and Camera Raw

    I have been using bridge, camera raw and cs5 since it was released. I have not any problems until this morning. I am able to open Bridge and Camera Raw, but when trying to open PS CS5, it does not respond?
    Any suggestions?

    Try resetting your preferences as described in the FAQ.
    http://forums.adobe.com/thread/375776?tstart=0
    You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
    This resets all settings in Photoshop to factory defaults.
    A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

  • Bridge CC でCamera Rawが使用できません

    Bridge CC で「ファイル」→「Camera Rawで開く」がグレーアウトしていて使用できません。ショートカットの「command + R」でも反応せず。原因と解決方法をお願いします。気になる動作として、起動時に毎回起動時に「キャッシュのクリアにしっぱ。。。」とポップアップが出ます。キャッシュをクリア、アンインス トール後再度インストールしても解決せず。

    Photoshopからは開けません。Photoshopのバージョンは「CC」  2014.1.0 20140730.r.148、OSは10.9.4です。ちなみにCamera Rawで開こうとしてる画像はJPGです。なのでPhotoshopから通常開けないかと思われます。BrudgeからはJPGでも開けるので、Brudgeで開いています。ちなみにBrudgeのバージョンは「CC」6.1.0.115です。

  • Images won't open in PS from Bridge and Camera Raw.

    I am suddenly unable to open images in Photoshop CS5 from Bridge or Camera Raw - what have I done wrong - how can I rectify it.

    Mullit wrote:
    I am also have a lot of start up problems with the computer itself and have lost a lot of my desk top, my internet search engine and various other things. Luckily all my documents and pictures are still intact though.
    This sounds serious.  I would make sure you have a backup on a seperate hd or disk or you photos and other documents.  If the drive fails you may loose everything on the hard drive.
    Check your free space and fragmentation on hd.  You should have about 20% free space.  So if you have a 400 gig drive you should have 80 gig free.

Maybe you are looking for