In Bridge CS6, my "Tools" tab is now missing the Image Processor option.

Hello!
Two glaring changes were made in my system all by itself. One is that in Bridge CS6, under the "Tools" tab, the "Image Processor" option is gone. All that's left is Batch Rename and Cache options. Does anyone know why this happened or how to restore this. Also, whenever I double click an image, it now goes directly to Photoshop as opposed to opening in Camera Raw first like it used to. All and any help is appeciated. Thank you!!!
Eric

Curt, thank you for your response. I did try that. I unchecked then
reselected all start up options and still nothing. Any other
suggestions?

Similar Messages

Image processor option missing from bridge cc

In the past I have been able to open Bridge and go to tools - photoshop- image processor and then a panel would open where I could resize my images, change their file type, and apply an action to a batch of photos. I just updated my version of Bridge CC and when I select tools, the image processor option is no longer there. Please help!

Don't use LR, but have heard it can make different copies of image, depending on process. Will not be readable outside of LR.

HT1677 iOS 7 for iPad the bookmarks tab is now on the top right hand side how can I change this back to the top left hand side as in the previous versions?

iOS 7 for iPad the bookmarks tab is now on the top right hand side how can I change this back to the top left hand side as in the previous versions? Thanks

Sorry but you can't

I am working on a PC. My InDesign CS6 was working but is now missing its amtlib.dll file. To fix it it says to reinstall program but I was am idiot and didn't make a copy. Is there any way to reinstall this missing file?

I am working on a PC. My InDesign CS6 was working but is now missing its amtlib.dll file. To fix it it says to reinstall program but I was am idiot and didn't make a copy. Is there any way to reinstall this missing file?

It was bought for my son and he never registered it.
I still don't understand why Neema was trying to reinstall it when she didn't have the serial number but after she uninstalled it, said she couldn't reinstall it because I didn't have the serial number. I never had it yet she didn't have a problem with trying to install it originally.
Still won't buy another Adobe product again. I've talked to a lot of people who can't stand Adobe and I now know why. I can't even update Flash without my whole system crashing or getting a virus.
I won't re-purchase InDesign either. I realize it should have been registered and I explained that my email had been hacked and my proof of purchase was deleted with ALL of my emails and I also had a major virus after updating Flash.
I can't afford to buy the same product twice.
I will find out what other formats my book distributor (Ingram Books) accepts and purchase that program.
Not impressed with Adobe and will share my experience with others so they can be sure to register their product and make a copy of the program BEFORE allowing an Adobe employee to take control of their computers.
If you knew the answer to my question, customer support should have too.
Thanks for your help.
Denise

Where is the image processor gone from new version of Bridge CC?

I updated to the latest versions CC and now the image processor menu item is missing. How do I get it back?
I had to reset back to Photoshop CC (NOT 2014) in order for my extensions, actions and scripts to continue working.
Any help would be greatly appreciated.
Thanks.

I have the same issue and uninstalled then reinstalled both Bridge 2014 and Photoshop 2014 - STILL missing.
Can someone solve our problem?

Can you help me with problems from latest update of Safari and ITunes. I can no longer delete cookies as I once did, because the security tab no longer displays the show cookies option. Can anyone please help?

I can no longer show or delete cookies from my MacBook Pro, since installing the latest update of Safari and Itunes.. Previously, I went to the security tab and clicked on the show cookies option, then opted to delete.. That option has now diappeared and a completely different security tab appears. The tab does not show a cookies option anywhere.
Also, I can no longer see a list of my software applications without opening system profiler.
Sure would appreciate your help. Thanks.

Safari's cookies is broken, either intentionally or it's a bug.
You can search the forums for
safari cookies lion
and turn up plenty of threads.
If you need control over your browser cookies and other aspects of your web browser, I suggest you install Firefox.
https://www.mozilla.com/en-US/firefox/fx/

Previously i was able to select tools in the bridge and then select image processor to make jpegs from my tiffs, the image processor tab is no longer on the tools drop down menu

previously while in bridge, i was able to select tools in the drop down menu and then select image processor to get to the page where i can make tiffs and jpegs. That option is no longer available in the drop down tool selection. How do I make jpegs from my tiffs now in the bridge.
thanks
[Moved from the general Cloud forum to the specific Program forum... Mod]

In current Firefox releases the search bar on the about:home page and the about:newtab page have an autocomplete=off attribute that prevents Firefox from saving form data and now show search suggestions just like you get on the regular Google search page.

Bridge CS6 (Windows 7) Photoshop/Batch menu missing.

I've installed CS6 (CS5 is still on the machine), and in the Bridge Menu, there is no longer a Batch menu item for initiating actions.
In Bridge's Edit/Preference command, I have the Startup Scripts checked. There are no files in the "Startup Scripts" folder.
I don't see a "Startup Scripts" folder in CS5, only in CS6.
I can still do batch operations directly from Photoshop CS6's automate window, however, I like the ability in Bridge to select specific files on which to run the action.
Any help appreciated.
Thanks!

Moving this discussion to the Photoshop General Discussion forum.

In adobe bridge cs6 i would like to pre build the thumb nails on an entire drive inc sub folders

in adobe bridge i would like to build all the thumbnails for the drive so when i go to a sub folder all the iamges are ready to go. i have tried select all and then build hq thumbnail but it only did the images in the root folder i was in. not the sub folders. what am i doing wrong?
thanks,
michael

They're both wrong
In your dreams…
Maybe I did not understand the OP correctly but using build and export cache usually creates less free space (certainly) and more problems (very likely…) hence I never advice this route. On a Mac this means double cacheing, first in Central Cache (same as our answer before) and also extra cache in folders.

Graphic resizing function has changed, now crops the image, why?

I must have, without knowing it, changed some setting. Until now whenever I bring in graphic, like a png or jpg, I can resize it by using the selection tool (arrow) and at one corner of the image I click, hold down shift/command (Mac) and then reduce or enlarge the size proportionally. What has changed is that now the image does not respond like that but rather the same maneuver crops the image in the sense that, like using a mask function, the image does not change size but the border of it changes and part of the image left non-visible. I assume there is a setting I don't know that does this but so far have not been able to figure it out. Does anyone know?
Any answer appreciated as very frustrating.
Thanks,
— Richard

Yes, I see the difference. I tried the sequence you suggested and is working, but also had gone back and forth on the menu choices before doing this and it seemed to change things as well, so not sure what did it. Appreciate your help. Will follow up if problem not fixed.
— Richard

Mid 2011 macbook air. command key has popped off and is now missing the 2nd metal bar. can this be replaced?

The command key popped off my mid 2011 macbook air. It is meant to have two metal bars but can't find the 2nd one. I have clicked it back into place but if I press the button at the bottom the top pops up and I'm worried that if I don't fix the problem I may end up losing the key altogether!
Can you buy replacement metal bars? should I just remove the other bar completely?
Thanks in advance.

Sorry, must have been the crackpipe I smoked last night! LOL
You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
ADDENDUM STEP:
This step should be placed between 9-10.
Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
Apologies for missing this.
Best,
WBN

All of a sudden, when I'm cropping an image in Photoshop CS6, I get a spiral curl inside the image while I'm resizing it. I've never had this before and it's a bit annoying. How do I get rid of it?

I've been using Photoshop CS6 for a few years and have done tons of cropping but never before have I had this spiral curl inside the image. How do I get rid of it and get back to the normal resizing/cropping of an image?

Verify your settings in the options bar.

I made an iPhoto book but now all the images are gone?

I recently made a book in iPhoto and never finished it. When I re-open the book in iPhoto, the formatting and all the text exists but the images are all gone. Is there a way to try and rebuild it? Thanks-M

Do the following: make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Why are missing from the Bridge CS6 menu: Tools the entries?

Hello all
why are missing for me in the Bridge of CS6 in the menu item Tools, the entries for Fireworks, Photoshop and Illustrator?
Since I installed the Creative Cloud CS6, these entries are missing.
A screen name is required to continue. Please enter a screen name.
Thomas

Click edit/preferences/startup scripts and make sure you have at least Bridge and Photoshop checked.

Preview in browser is not working in Bridge CS6. There also does not seem to be an option to change browsers.

I am trying to create a web gallery in CS6. I have done this before in Photoshop with CS3, but now that it has changed to bridge it doesn't seem to work for me. There is no preview option within Bridge which is a bit frustrating, but I at least have the "preview in browser" options. Except, when I hit "preview in browser", my browser opens but it just opens to the current window open - I am not getting a preview at all. The only way I can seem to preview is to save the file, then open it in the browser - but this way I cannot play with the various settings and I am finding it very frustrating.
There should be a way in Bridge to change the default browser. Perhaps my browser settings are not allowing it to open, however, I cannot find an option to switch it open in another browser... also very frustrating.
This extremely simple web gallery creator, which I have used easily in CS3, seems to be less user friendly in Bridge.
Any ideas on how to change browsers or fix the browser I am currently using to use the "preview in browser" button?

I am trying to create a web gallery in CS6. I have done this before in Photoshop with CS3, but now that it has changed to bridge it doesn't seem to work for me. There is no preview option within Bridge which is a bit frustrating, but I at least have the "preview in browser" options. Except, when I hit "preview in browser", my browser opens but it just opens to the current window open - I am not getting a preview at all. The only way I can seem to preview is to save the file, then open it in the browser - but this way I cannot play with the various settings and I am finding it very frustrating.
There should be a way in Bridge to change the default browser. Perhaps my browser settings are not allowing it to open, however, I cannot find an option to switch it open in another browser... also very frustrating.
This extremely simple web gallery creator, which I have used easily in CS3, seems to be less user friendly in Bridge.
Any ideas on how to change browsers or fix the browser I am currently using to use the "preview in browser" button?

In Bridge CS6, my "Tools" tab is now missing the Image Processor option.

Similar Messages

Maybe you are looking for