In built Bluetooth for G5?

Currently my G5 does not have built in Bluetooth but rather... I am using a Bluetooth D-Link dongle.
Works fine other than I have to use my wired Apple keyboard instead of my Bluetooth Apple keyboard for Single User mode. Also since Leopard (I'm at 10.5.1) I get 781+ error messages in Single User mode related to Bluetooth. The following link shows a screenshot...
http://www.theimagecache.com/downloadarea/forum_images_misc/single_usererror.html
So I'd like to make it possible to eliminate the dongle and be able to use my Bluetooth keyboard in SUM if possible.
Is it possible?

{quote}
Just out of curiosity, why do you need to run in single user mode (I have never needed to do that)?
{quote}
SUM allows you to repair the directory without having to boot from another drive; partition; or CD/DVD.

Similar Messages

Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

Does anyone have experience with Iogear GBU 421? My MacPro has no in-built Bluetooth.

My 2010 Mac Pro does have built in bluetooth but I use the IOGear GBU421 instead. That's because the built in bluetooth on the mac pro suck$ if you are more than about 3 feet from the machine.
See the descussion: Poor Bluetooth reception and jerky mouse
It works but you need to get used to its "quirks". If you sleep your machine like I do the dongle is off because there is no USB power when sleeping for the dongle. So you need some wired USB device to wake the machine. In my case I use my wired keyboard.
When waking up it doesn't always become paired immediately (maybe 30% of the time). Then you need to flip the mouse switch to get it active. Interesting enough I don't have that problem with the trackpad.
Most of the time, in the rear occasions I reboot my machine, the mouse is ready to go.
Once you get used to the "quirks" it's no big deal. Hey, for about $9 what do you want?
By the way I also always keep a wired mouse attached as a backup.

Berklin bluetooth for mac

Hi,
I recently bought a Berklin bluetooth for mac. I have built in blue tooth in my computer but the range is not enough ( I hook up a motorola blue tooth to my computer and talk on skype this way).
The New Berklin Bluetooth is letting me use the headset. When I hook it up it acts like another blue tooth device and recognizes my computer too (and the headset for that matter). It is not letting me sync the headset.
In the instructions it says that Mac OS X driver and software provided by Apple.
What can I do to make this blue tooth act like it is taking the place of the Blue tooth in my computer and not acting like another device.
Thanks!!!
Barak, DVM

You can use almost ANY internet connection and service provider for Macs (even if they say they don't support Macs usually)
An ADSL connection over your phone line can get you speeds of 512kb/s minimum, usually much more. Or a cable connection (via your cable TV provider) can get you similar speeds.
AOL is not the only internet service provider for Mac. There are literally hundreds, if not thousands in the US.
AOL do offer ADSL broadband connections, but to be honest, you'd get a better deal elsewhere.
Have a look here for alternative Internet Service Providers, that can provide you with better speeds at lower costs than AOL.
Jools
P.S. If you can't upgrade your internet connection soon, why not ask a friend to download the updates for you and burn them onto CD.
Windows PCs are able to download these files too.
Or ask in your local Apple Store.

How to get built.xml for ear file in jdeveloper?

Hi,
I am using JDeveloper to create EAR file for my ADF Fusion Application. I think Jdeveloper use ant to create EAR file. I know how to get built.xml for my war file.
Can anyone tell how to get that built.xml that create EAR file in Jdeveloper.?

This blog explains:
http://adfhowto.blogspot.com/2011/03/ojdeploy-deploying-adf-application-from.html
Based on the blog, I simply copied an existing project "deploy" target definition and augmented the project's build.xml with a new target "deployApp" that omits the Project parameter to ojdeploy. This causes ojdeploy to build the workspace-level deploy profile instead. I also omitted the output directory parameter (default is app's /deploy folder) and assume that there is only one application deployment profile (i.e. the default for profile parameter is the '*' wildcard). You can augment the build.properties file if you need to get fancier than that.
<target name="deployApp" description="Deploy Complete YourFoo Application"
depends="init">
<taskdef name="ojdeploy"
classname="oracle.jdeveloper.deploy.ant.OJDeployAntTask"
uri="oraclelib:OJDeployAntTask"
classpath="${oracle.jdeveloper.ant.library}"/>
<ora:ojdeploy xmlns:ora="oraclelib:OJDeployAntTask"
executable="${oracle.jdeveloper.ojdeploy.path}"
ora:buildscript="${oracle.jdeveloper.deploy.dir}/ojdeploy-build.xml"
ora:statuslog="${oracle.jdeveloper.deploy.dir}/ojdeploy-statuslog.xml">
<ora:deploy>
<ora:parameter name="workspace"
value="${oracle.jdeveloper.workspace.path}"/>
<ora:parameter name="profile"
value="${oracle.jdeveloper.deploy.profile.name}"/>
<ora:parameter name="nocompile" value="true"/>
</ora:deploy>
</ora:ojdeploy>
</target>

[Flex 4.5.1] What is the best way of adopting a flex built website for mobile "as is"?

What is the best way of adopting a flex 4.5.1 built website for mobile "as is"?
I have a website built with flex 4.5.1 which I want to be working on mobile as it should - meaning that touch style of interactions should be working not mouse.
The question is: Do I HAVE TO recode all of my website from Application into Mobile Application in order to be a more lightweight version of the original one, which includes: remove some functionality, pages, animation, build a separate backend and cms to control it etc.?
OR
Can I just define mobile skins, for my existing components to use when in mobile mode, in which I could have done some tweaking by removing some unnecessary parts and changing component interactionMode to Touch ?
Are both options which I see possible and if yes - which one would you recommend?
Thanks in advance!

Thanks for the answer. Yeah I bet you figured out what I want the answer to be, but is it ? That's why I am asking here. I can see my website on my HTC Desire HD and it's working pretty well. If I reskin the parts that need a bigger hit area or the scrollers to work with touch so I don't have to scroll the actual scrollbars with my finger, remove some complex animations - everything will work just fine... The problem is that I am not sure if that is the right way to do it or if it is possible at all.
I do get your point about not designed for mobile stuff, but while with html 5 you get the job done for web and mobile with little differences at the same time, in flash you need double time cause you'll have to build 2 projects. And since the framework is one for both web and mobile.. why not...
I want to see the pros and cons of the both approaches I suggested. In a complex modular architecture I could easily swap one web module with a mobile module for example or change skins or components if I need more lightweight ones, but do I have to copy all that logic in to a MobileApplication, can't I do it with Application and use the MobileComponents (which are simplier and less functional) if the project actually needs them...
I do hope you get why I am asking these questions, and I can't believe I haven't found a guide or something like that "why this and not that" when it comes to mixing web with mobile development and flex... If you have, please share the link, I would be happy to read. Or someone with the experience in what I am talking about shares some knowledge, that would be great!
Thanks.

Can i get Bluetooth for my ipod touch 2G..????

Is there any possibility if i can get Bluetooth for my ipod touch 2G..????

i'm very much thankful to u about this.. can u tel me whether there is an availability of new panels for ipod touch 2G..???? and one more quest.. its d last.. can we fix a camera for it.??? there is a rumour that we can.. so i'm asking..

Ipad mini retina cannot share hot spot with Bluetooth for Iphon5

Ipad mini retina cannot share hot spot with Bluetooth for Iphon5
But When my Iphon5 share hot spot with Bluetooth for Ipad, I can share.

Dear Texas,
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Ipad and Iphone can connect bluetooth.
Yes, if Iphone5 share hot spot Bluetooth for Ipad mini. (Work fine)
But when Ipad mini (IOS 7.04) share hot spot Bluetooth cannot connect with Iphone5.
Adisornj

How do i find the passkey to my bluetooth for my iPod because i want to pair it with my ps3

How do i find the passkey to my bluetooth for my iPod because i want to pair it with my ps3

For what purpose? If the PS3 can act like a Bluetooth speaker than just pair it, no passcode required. The iPod does not have many Bluetooth profiles. However, also see:
iOS: Third-party Bluetooth headsets, headphones, and keyboards
iOS: Supported Bluetooth profiles

Pre-built EULs for Payroll/HRMS

Where can we obtain pre-built EULs for the following Applications modules Payroll/HRMS?

Hi,
You will have to load import the EUL stored in $AU_TOP/discover using the adupdeul.sh script. See note 257798.1 for full details.
Rod West

I work for company and we use HTC phones .. We are thinking of changing to iPhone... We use destiny pens and have been advised that apple blocks the Bluetooth for this device... Why

I work for company and we use HTC phones about a hundred .. We are thinking of changing to iPhone... We use destiny pens and have been advised that apple blocks the Bluetooth for this device... Why...?

Apple doesn't "block" that device. They just don't support the Bluetooth profiles the Destiny pen requires. You can see the Bluetooth profiles included in iOS here:
http://support.apple.com/kb/HT3647
and the profiles required for the pen here:
http://www.destinywireless.com/flash/#/thedigitalpen/compatibility/bluetooth_com patibilty/
Perhaps another pen such as the A4 Smart Pen would work for you in place of the Destiny device:
http://apenusa.com/productdetail.php?product_id=4
Regards.

Built-in for D2K like Java TAPI

Hi,
Is there any built-in for D2K like Java TAPI to track telephone
call.
Take care,
Tarek

Hi
Please refer below Google drive, where I have very good PDF -good for beginners and experts. If not able to access, let me know Email
https://drive.google.com/?tab=wo&authuser=0#my-drive

Unable to install Pre-Built VM for SOA 11gPS5 appliances

Hi,
I wanted to install Pre-Built VM for SOA+BPM latest release 11gPS5 on my system and downloaded the appliances from the below link:
http://www.oracle.com/technetwork/middleware/soasuite/learnmore/vmsoa-172279.html
But I could find one of the installer file size to be just 810 MB instead of 2GB. While extracting oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.001 using 7z, the extraction failed with as error message as below: "Data error in 'oel5u5-64bit-soabpm-11gr1-ps5-ps5-2-0-M.ova'. File is broken. "
Also I could see the processed file size as 14972 MB where as Compresses size as 13098 MB and file oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.007 is 810MB.
Are the expected file sizes for all the oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.001 to oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.007 is 2GB?
Upon running md5sum, every file gave 100% result size, but there is a mismatch in the hexcode as below:
oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z... 100% 5a57717c6c47eef31ac463abda92dc73 for 2nd file oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.002 (2GB)
f2c867a6737dd7aa3228ab4c516bbf5c oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.002 ---- as per the link http://download.oracle.com/otndocs/products/soa/soabpm/oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.md5sum
Can anybody help in this regard please?
Many Thanks
Sidharth
Edited by: user623695 on Jun 17, 2012 6:25 AM

Did you check the MD5sum to make sure the download was successful?
dowload MD5sum.exe
c:/ MD5sum.exe fille1.......file7
compare o/p with the given
http://download.oracle.com/otndocs/products/soa/soabpm/oel5u5-64bit-soabpm-11gr1-ps5-2-0-M.7z.md5sum
download again the unmatched file
, then try 2 extract with 7zip
Edited by: 952094 on Nov 29, 2012 11:03 PM

I need driver bluetooth for win 7 64bit who can help me ?

I need driver bluetooth for win 7 64bit who can help me ?

Does this solve your problem?
http://windowsforum.com/threads/make-your-bluetooth-devices-work-on-windows-7.24 580/

I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

I play music from my iPhone via Bluetooth on the car radio. The phone also connects over the radio. Can I turn off Bluetooth for phone and leave it on for music?

I haven't tried it yet, but I believe this would disconnect Bluetooth for both the phone and music. I have a 2013 Hyundai Sonata if this will help.

Stereo Bluetooth for Iphone

Do anybody know if Apple is working on coming up with Stereo Bluetooth for Iphone?

Here is how I am able to listen to audio thru my bluetooth earpiece from my iPhone's iPod content including video. It works with Apple's bluetooth and Motorola's H5 bluetooth. It's only one ear hence mono sound I believe. I don't have a stereo bluetooth headset to listen to to hear otherwise.
First make sure the bluetooth is paired and active. Touch phone from home screen< then touch voice mail < then in the upper right hand corner touch audio < your bluetooth device should be visible < touch it.
Now you should be able to listen to your iPod thru your headset. The only drawback is that the audio is also going thru the iPhone speaker too.
It works on my iPhone running latest update. Good luck.

In built Bluetooth for G5?

Similar Messages

Maybe you are looking for