In calendar program the time in outlook is one hour different from time in iphone appointments

The time for all appointments in my outlook and synced to icloud are one hour different. I was in Mexico which at the time was one hour different from pacific time. How do I keep both times the same.

You might want to go to icloud.com from your computer, sign into your iCloud account, click on your name, then confirm that you have the correct time zone set for iCloud, and that on your phone in Settings>General>Date & Time that you have Set Automatically turned On.

Similar Messages

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Whenever I go to a site or click anything, I always have to move my mouse for the page to load, why is this happening? (When I go to a site full of images, I move my mouse a little bit at a time and it loads one image at a time)

Hi, Tom.
FYI: You've not stated which of your listed Macs is having the problem. However, the following may help in any case:
1. Did you install Front Row using the Front Row hack on a Mac that did not ship from the factory with Front Row installed? If so, See my "Uninstalling the Front Row hack" FAQ. This has been known to cause a variety of problems, including the menu bar (Clock, Spotlight) issues you noted.
2. If you did not install the Front Row Hack, an incompatible or corrupted Startup or Login Item may be partly to blame for the problems with the menu bar. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
3. As a general check, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
4. Re: Safari and Mail, if not sorted by any of the above, see also:• "Safari: Blank icon after installing Security Update 2006-002 v1.0."
• My my "Multiple applications quit unexpectedly or fail to launch" FAQ
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

HT201250 Circle and cross through iTunes icon afte the seagate hard drive replaced and restored data from time machine backup.

Circle and cross through iTunes icon: had the seagate hard drive replaced and restored data from time machine backup. Why does the iTunes icon have a circle and cross through it? As though incomplete? tried everything and still Circle and cross through iTunes icon.

No it isn't something you'd find on the computer, it has to be custom installed from the 10.6 installer disc or Software Update if it wasn't before. It allows you to use older PowerPC applications on your Mac. On the other hand double check the version of iTunes you have does not require 10.7 minimum either.

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, it now happens frequently. Any insight?

I have a late 2006 iMac that has just started giving me a message to reboot after a black screen comes down slowly from the top top of the screen to the bottom. I reloaded software and restored from Time Machine, but it keeps happening, now several tomes a day. Any insight as to the issue or a proposed solution?

Unplug any peripherals you have except your keyboard, reboot, and check activity monitor for apps. Keep running apps to a minimum to find the App causing the issue.

When I locate my iPad it sends me my email but the time it says in the email is like a 3 hour difference from the actual time I locate what do I do to have the proper time there

When I locate my iPad it sends me my email but the time it says in the email is like a 3 hour difference from the actual time I locate what do I do to have the proper time there
My time is correct but email time of location is wrong

Welcome to the Apple community TMOZINGO.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?

I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?

I have a problem to update iMovie 9.0.9. The OS is running really slow and halts from time to time. In the update procedure it says it's one minute left. That was one hour ago... What can I do?

Calculating Elapsed Time Is Off By One Hour

I am fully aware of many topics discussed in the various forums here related to the OS timezone and DST settings impacting how the JVM will process date/time calculations. I am running on Windows XP Professional, and I have checked and double checked the timezone setting, it is correctly set to Central Time and the "Automatically adjust clock for daylight saving changes" checkbox is checked.
The code found at the end of this message clearly shows the problem for which I have yet to find an explination. I intended to be able to use a timer to update a string to show how much time has elapsed since the start of anything for which I need to know this information. As you can see by the results (example of which is listed after the code), the timezone and DST offsets seem to be properly retrieved by the JVM, but if this is the case, then why is the elapsed time value off by one hour?
I am looking for a solution/explanation involving the date/time classes, not a workaround whereby I end up extracting multiple time representation subsets and manipulating them myself. Any help will be greatly appreciated.
* TestTimeZone.java
* Created on September 12, 2004, 7:18 PM
import java.io.*;
import java.util.*;
import java.awt.event.*;
import java.sql.*;
import java.text.*;
* @author Jared
public class TestTimeZone {
    java.util.Date startDt;
    /** Creates a new instance of TestTimeZone */
    public TestTimeZone() {
     * @param args the command line arguments
    public static void main(String[] args) {
        new TestTimeZone().go();
    private void go() {
        startDt = new java.util.Date();
        TimeZone tz = TimeZone.getDefault();
        System.out.println("the default timezone is " + tz.getDisplayName(true, TimeZone.LONG));
        System.out.println("the default timezone ID is " + tz.getID());
        System.out.println("useDaylightTime = " + tz.useDaylightTime());
        System.out.println("default locale = " + Locale.getDefault().toString());
        javax.swing.Timer t = new javax.swing.Timer(1000, new ActionListener() {
            public void actionPerformed(ActionEvent ae) {
                java.util.Date currDt = new java.util.Date();
                Calendar cal = Calendar.getInstance();
                long elapsedTime = currDt.getTime() - startDt.getTime() -
                    (cal.get(Calendar.ZONE_OFFSET) + cal.get(Calendar.DST_OFFSET));
                SimpleDateFormat formatter = new SimpleDateFormat("HH:mm:ss");
                System.out.println("Elapsed: " + formatter.format(new java.util.Date(elapsedTime)) +
                    " Start: " + formatter.format(startDt) +
                    " Current: " + formatter.format(currDt));
        t.start();
        while (true) try {
            Thread.sleep(10);
        } catch (Exception e) {
            e.printStackTrace();
}And here is the result I am seeing:
the default timezone is Central Daylight Time
the default timezone ID is America/Chicago
useDaylightTime = true
default locale = en_US
Elapsed: 23:00:01 Start: 00:03:57 Current: 00:03:58
Elapsed: 23:00:02 Start: 00:03:57 Current: 00:03:59
Elapsed: 23:00:03 Start: 00:03:57 Current: 00:04:00
Elapsed: 23:00:04 Start: 00:03:57 Current: 00:04:01
Elapsed: 23:00:05 Start: 00:03:57 Current: 00:04:02
"

Great. Now that we have gotten half way to the goal, please let me know how you intend to get that difference in miliseconds presented as a time value using any of the date/time classes Java has to offer. That way, I don't have to rewrite the code that puts it into a properly formatted String (the kind folks at Sun have already written that code). Using date/time classes to acheive this is what I attempted with my application. I added the milisecond adjustments for TZ and DST because if I didn't the reported elapsed time would be off by 6 hours, not just 1.
I am open to all suggestions.

I was having ios 4.3 and decided to upgrade to ios 5 and in doing so I lost all my apps despite I restored from my earlier back up. The itunes I've backed up is different from the itunes I have used to upgrade-..

I was having ios 4.3 and decided to upgrade to ios 5 and in doing so I lost all my apps despite I restored from my earlier back up. The itunes I’ve backed up is different from the itunes I have used to upgrade….. I was wondering if I can get back my apps that were purchased using different apple ID (not mine). Since I am in Ethiopia doesn’t even have the chance to buy it again. I have searched it in my computer/c/user/adminstrator….but couldn’t find it. Anyone p/l help

When I updated my iPhone to IOS 5, I did it from my MB Air, when my iPhone's "home" is my work 27" iMac. I figured I could just download the new OS at home where internet is fast and then sync at office and be done.
WRONG!!! So, like others here, all my apps were "gone."
Following some of what I read above, I did the following and now all my apps that I purchased in the past are downloading to my 27".
In iTunes I went to Purchased, under "Store" in left column of iTunes.
Then at the bottom of the Purchased screen was something like Download all apps, borrom right (sorry, cant see it now, its downloading all of them). Once I hit that, I could see all my apps and it looks like they are all coming back.
Now all I have to do is put them all like I had them before, folders, etc. That will be a pain BUT at least I have all of them.

Any time I open a photo program the application freezes. I want to reinstall OSX from the original disk and then restore my machine from time machine Will a restore from time machine only restore my Apps and data

Tried to post a question about restoring my i mac from time machine, but this new format makes no sense to me. I want to restore my i mac from time machine after I reinstall the OS from the original disk. Will a time machine restore only restore the applications and data or will it restore the current state of the OS. My machine will not let me open any photo applications (aperture, I photo, NX 2) I have to force quit them every time I try to get some work done.

06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA

Concurrent program to be submitted y only one user at a time

Hi
I have an issue with one of my reports. The report is using temporary tables, those will under go insertion and deletion while the report is running. So, to make sure that two or more concurrent requests submitted for same report, will not conflict, I want to make my concurrent request to be submitted by only one user at a time.
How can I do that?
Any help is appreciated.
Thanks
BalaKrishna

The "run alone" box should not be checked. This indicates that this program can only run when no others are running. Pl see MOS Doc 1078462.6 (Custom SQL Concurrent Program Returns NO MANAGER Error). This option should typically not be used.
To be able to achieve what you need, set the incompatibility (as you have done) and then bounce the concurrent managers for the setting to take effect. Pl see these MOS Docs
436186.1 - Cannot Make Concurrent Programs Incompatible With Itself
142944.1 - How to Make a Concurrent Program Incompatible with Itself
HTH
Srini

WRT 120N- Cannot connect to the internet with more than one PC at a time.

Before I went on a three month vacation,I could connect 3 or 4 PC's either wireless or wired to my router with no problems at all.I have a desk top and a laptop computer which I use at home.After I returned,I found that I could connect to the internet with only one PC at a time.
If I was say,connected via my laptop,my desk top would continuously keep getting disconnected and vice versa.I have been reading the suggestions from experts here and have done a few checks based on them.I also cannot get to my router page which is 192.168.1.1 I keep getting a message that says "Problem Loading Page" and this happens with both,Firefox and Internet Explorer.I am running Windows 7 - 32 bit on my desk top and Vista Home Premium on my laptop.
I have opened the "Command Prompt" dialogue and pinged 192.168.1.1 and thereafter I typed in "ipconfig".These are the results:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\Gordon>ipconfig
Windows IP Configuration
PPP adapter Brownwolf:
   Connection-specific DNS Suffix . :
   IPv4 Address. . . . . . . . . . . : 92.98.42.65
   Subnet Mask . . . . . . . . . . . : 255.255.255.255
   Default Gateway . . . . . . . . . : 0.0.0.0
Ethernet adapter Local Area Connection* 22:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:35a2:8753:8832:f494
   Site-local IPv6 Address . . . . . : fec0::c:35a2:8753:8832:f494%2
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:35a2:8753:8832:f494
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:a408:59a3:918e:f0ab
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:a408:59a3:918e:f0ab
   Link-local IPv6 Address . . . . . : fe80::35a2:8753:8832:f494%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.1
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41:c:413:cf4f:77af:474d
   Site-local IPv6 Address . . . . . : fec0::c:413:cf4f:77af:474d%1
   IPv6 Address. . . . . . . . . . . : 2002:5661:4cc9:c:413:cf4f:77af:474d
   Temporary IPv6 Address. . . . . . : 2002:5661:4cc9:c:1591:ad9:13da:8fea
   Temporary IPv6 Address. . . . . . : 2002:5c62:2a41:c:1591:ad9:13da:8fea
   Link-local IPv6 Address . . . . . : fe80::413:cf4f:77af:474d%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : fe80::35a2:8753:8832:f494%11
                                       192.168.1.1
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 14:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 15:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 19:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 20:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2002:5c62:2a41::5c62:2a41
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
Tunnel adapter Local Area Connection* 23:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 24:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter Local Area Connection* 28:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
I presume that this model is a modem **bleep** router as I do not have a separate modem with my system.I have a DSL connection and the firmware version of my router is ver.1.0.If I recall,I did upgrade to the next firmware upgrade a few months after I purchased the router but I am not sure.
I use both my PC's to run a small business venture and I am worried that resetting the router may cause some other problems and will stop me from using the internet.
The Command Prompt information above was taken from my laptop.
Any help will be really appreciated.
Gerard.
Solved!
Go to Solution.

brownwolf66 wrote:
No,I have a desk top and a laptop and I cannot access 192.168.1.1 on either of them.In my OP,I have used the Command Prompt dialogue on both computers to ping 192.168.1.1 and I have attached the results.This is what I got:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Gordon>ping 192.168.1.1
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Reply from 192.168.1.1: bytes=32 time<1ms TTL=111
Ping statistics for 192.168.1.1:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
The results I obtained using ipconfig in the command prompt have already been mentioned in my OP.
I do not know if the above result is what it is supposed to be but I still cannot access my router's home page.How do I verify if there is a proxy server and if there is one,how do I disable it in my browsers?This problem occured suddenly as a few months earlier all was well.It's getting rather frustrating.
I suggest resetting the router. Make sure firmware is updated. You can download it here - http://homesupport.cisco.com/en-us/support/routers/WRT120N. After firmware upgrade, reset and reconfigure. Just access the link below to guide you setting up the router.
* Setting up a Linksys router for DSL Internet connection
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20ee1457387f40178cd5f41d4b585db4_3687.xml&pid=80&r...
* Setting up a Linksys router with Cable Internet service
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=0ff4c94586a345d082828ec2161aaecf_3686.xml&pid=80&r...

The back/forward buttons on the tool bar only go one page at a time. I used to be able to click a drop-down and select how far back/forward I wanted to go. How can I get that back

I can only navigate back/forward one page at a time. The drop down box that used to allow me to see the recent pages and select the page I wanted to go to was immediately to the right of the "forward" button. I can right click over the forward/back buttons and get the dropdown list of recent sites.

Use right-click on the back/forward buttons to bring up the context menu, the drop down was never needed, and I had suppressed it for a long time to save space.
that is item #5 in the following, you might want to check out other items there.
You can make '''Firefox 6.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

How do I get the arrow keys to move one character at a time in the address bar or search box?

I can no longer get the arrow keys to advance or retard "one character at a time" in the address bar, the search box, or on any form in Firefox. This feature works in other browsers without a problem. The "Home" and "End" keys do not work either. How do I fix this behavior?

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

How can I use the move tool to drag ONE pixel at a time?

The move tool is stuck to snapping at ~20 pixels at a time, so when I try to move a layer by a few pixels, its super frustrating. I dont want to have to use the arrow keys, I should be able to drag wherever I want.
How can I stop the move tool from snapping? I want to drag things precisely. I am zoomed at 100% if that makes a difference. I cant find anything about this under Preferences.

kelly-bot wrote:
Thanks for the tip, but like I said, I dont want to always have to use the arrow keys. Is it not possible to actually DRAG one pixel at a time? I recently upgraded to CC from CS3 and I keep running into things that feel like a downgrade. Super disappointed.
Our posts overlapped there. Are you saying you could reliably drag one pixel with CS3?
What other issues are you having? Things like the Crop tool can feel strange at first, but I promise you you'll never want to use Classic mode once you get used to it.

"STORED" Time On Texts With One Hour Earlier Time Wedged Between The Two Eastern Time Stamps.

The middle time stamp would coincide with Central Time, but it is not labeled as such. If that is what it represents, then it shouldn't
be on my texts since eastern Tennessee and Georgia are in the Eastern Time Zone.

budone wrote:
budone,
In the last two days there has been a change in the format of my text messages. Previously, the texts simply had a time stamp given in Eastern Time. NOW, this is followed with the date and AM or PM time, but the time is one hour earlier and NO Time Zone notation given. Then it says, 'Stored' with a time stamp matching the date and time given in the line designated as "Eastern."
Surely, there are others who have experienced this. I hope this clears the explanation up some.

In calendar program the time in outlook is one hour different from time in iphone appointments

Similar Messages

Maybe you are looking for