In-Call Toolbar

I was in a video call with someone (both of our online statuses listed as 'Online') and in the call, the toolbar would not disappear from over the video. It is already a nuisance that they have promised and never fixed the mic-muted button always appearing, as it takes over the majority of the bottom half of the video in the preview mode as well as a large portion when the call screen is up.
I have looked over people reporting this issue in previous versions and the recommendations for those problems are all non-applicable to me. I am not in accessibility mode. I do not have corrupt files. Myself, and the party I am calling both have the most recent version of Skype on our computers (6.21, although I have seen that 6.22 is available, the search for updates does not recognize 6.22 yet and I am on 6.21). I have not had this problem before today, and even in the past while that I have been on 6.21. There are no pending IM's or missed calls from anyone. The call quality is all fine (maximum bars). The connection between me and the other party is good.
I am certain it is not Windows thinking I am still hovering over the video in the call, because the muted microphone image appears after a few seconds as it would in general, but it appears on top of the toolbar overlay. It then disappears when I move my mouse back over the toolbar and it registers and I am able to click end-call or end-video, etc.
This is extremely annoying for many reasons, obviously. I am also still highly annoyed at the muted microphone overlay being a mandatory visible icon, although I can understand why many people need it, it is highly unnecessary and I should have the option to hide it as sometimes I just like to look at my girlfriend in video instead of seeing a monstrous microphone with a red cross over it.
I have logged out and back in. I have ended and started both Skype AND Windows. It is continuing to happen. Anyone have a fix?
Solved!
Go to Solution.

I just ran a test with Windows 7 and 10 technical preview. There is only one instance in which the bar remained. This is when I stored the mouse on the bottom. If I left it on the far top, left or right, it eventually disappeared. There is still no way of hiding the mic mute icon unless you switch the audio to a dead audio input ,

Similar Messages

I get an error when installing Call To Call

I always get this error when installing the Skype Call To Call toolbar:
"The installer has encountered an unexpected error installing this package,this may indicate a problem with this package.The Error code is 2738"
Help anyone?

Just in case, even though it's for a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Skype click to call crash

skype click to call has crashed and is affecting the uploading of my exam paper finals
in trinidad

try uninstalling Click to Call toolbar with Revo (Select advanced options-remove all)
http://www.revouninstaller.com/revo_uninstaller_free_download.html
now try reinstalling latest Click to Call with this link:
http://www.skype.com/go/getskype-skypetoolbar
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Click 2 call and excel copy/paste problems

Recent posts from late May claim that the click to call issues were resolved in late may. Today is June 21/12 and I resolved the problem yesterday by un-installing the click to call program. Prior to that cut and copy requests were losing the marquee around copied cells and when target cells were right clicked the context menu did not include Insert Copied cells.
Some problems may have been addressed but the problem still exists. It's too bad because click to call was a good feature.
Solved!
Go to Solution.

The problem was identified and fixed already in an update to the Click to Call toolbar in April: http://blogs.skype.com/garage/2012/04/skype_click_to_call_fix_for_of.html
*Best Solution* Download the new version of Skype Click to Call. It’s the quickest way to solve the copy & paste problem you are experiencing. Go to http://www.skype.com/intl/en-us/get-skype/on-your-computer/click-to-call/windows/ and click Download Now.
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Received calls are automatically rejected

All calls directed to me are automatically rejected, I don't even see the call toolbar. This is a serious issue for me as I use Skype at work. I tried installing the an older version of Skype (6) but it does not work. I really need to be able to receive Calls. This is the same for group Calls. Please provide an acceptable solution for this issue.

I am having precisely the same issue this morning, and also use Skype at work. I have tried uninstalling and reinstalling Skype, and changing and resetting my privacy settings, neither of which helped.

Click to Call Widget 8.0 Outlook Phone Numbers

Hi,
I have a customer who is using the Click to Call 8.0 Widget.
They have contacts with the following numbers specified:
Business
Business 2
Mobile
Home
The Business, Mobile and Home numbers show up when I click the "Click to Call" toolbar button but the Business 2 number does not.
Is this a known limitation of the Click to Call widget? - if yes are there any workarounds?
On a related topic the C2C plugin seems to cause Outlook to crash on a few PC's. I am using the latest version available from the Cisco download site (8.0.2540.0).
This was released in July 2010. Does anyone have any suggestions for troubleshooting Outlook crashes? - there seem to be some Engineering Special versions mentioned on here - would it be worth asking TAC about these?

Hi James,
With regard to the Outlook Crash issue, you may be hitting the bug CSCtl57395 which is superceded by
CSCtj90662.
.This bug is superceded Though it is in "release pending" state, I could see a couple of customers being able to solve this issue with the latest ES published by TAC.
I would suggest you to open up a case with Cisco TAC and let them verify if you are hitting this bug.
Please rate helpful posts.
Regards,
Saurabh Agnihotri

Forms compilation Errors under Linux

Hello,
I have a main form called Tbdoctrk.fmb.
This forms compiles and runs perfectly through Oracle 9i iDS.
When transfering the fmb file under Linux, and attempting to recompile using the f90genm.sh utility, I get the following compilation errors:
FRM-18108: Failed to load the following objects.
FRM-30436: Parent window not specified for canvas.View Canvas H_TOOLBAR
FRM-30041: Position of item places it off of canvas.
Item: BUTTON_HELP
Block: VARIABLE
Form: TBDOCTRK
FRM: Unable to adjust form for output.
====
I noticed that most of the object that failed to load (1 data block object, 1 canvas and a number of property classes and visual attributes) are contained in a file called TOOLBAR.fmb.
The TOOLBAR.fmb file compiles without errors under Linux/WIndows + is located in the same folder as the Tbdoctrk.fmb file.
1) How can I resolve this issue ?
PT
PS: I tried renaming the fmb files to upper/lower case without success.

Hello,
My main form called Tbdoctrk.fmb in turn calls a form called Pre_bord.fmb in a Program Unit.
Most but not all Class and Value Attributes are included in a file called toolbar.fmb. I did not find any specific reference to the toolbar.fmb file.
However, at compile time, I find that those objects are not loaded.
1) In what part of the main form Tbdoctrk.fmb should I find any such reference to the toolbar.fmb file ?
2) How should I create those symbolic links under Linux ?
PT

I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??

Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!

I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly!

Adobe Fourms does not work with Opera too well

Adobe Fourms does not work with Opera too well. I have to use in Opera "Identify as Firefox just to post this message!
I also have run into the same junk with Hotmail.
Web Design Tip: Always code for Opera and all other browsers will fall in line most of the time.

dave milbut wrote:
of course you're right east texas. hadn't noticed that. bad bad adobe. someone smack them with a rolled up news paper on the snout!
I've installed a button in my Firefox tool bar to toggle iFrames on and off through a Firefox add-on called "Toolbar Buttons".
The forum Reply Editor does not work when iFrames are blocked, so I need to toggle them back on when posting, then back off. I imagine that's better than having them on all the time.
Message was edited by: Ramón G Castañeda

Tablecontrol select all button

hai,
I am using Table control in screen created by wizard and added selectall,deselect,sort buttons seperately in application tool bar.
I want to access tablecontrol from this buttons outside.
i dont know how to catch the tablecontrol from outside
selectall icon or button displayed in app toolbar.
I want to including coding here PAI.
ok_code = sy-ucomm.
case ok_code.
when 'selectall'.
call toolbar method ? what method
when 'deselect'.
when others.
endcase.

hai
thanks for your reply.
I have tablecontrol name as ztabctrol.
in coding wizard generated another two kinds of variable notation G_ztabctrol_itab and T_Ztabctrol. which one should i have to use below.
loop at tablecontrol_tab into tablecontrol_wa
move 'X' to tablecontrol_wa-flag.
modify tablecontrol_tab
from tablecontrol_wa
transporting flag.
endloop.
exit.
I declared data at top in prog and wrote this code below.
inside PAI.
loop at G_ZTABCTRLOBJ_ITAB into G_ZTABCTRLOBJ_WA
move 'X' to G_ZTABCTRLOBJ_WA-flag.
modify G_ZTABCTRLOBJ_ITAB
from G_ZTABCTRLOBJ_WA
transporting flag.
endloop.
exit.
it gives error at status "G_ZTABCTRLOBJ_ITAB is not defined".
why it is.
ambichan.

URL window has disappeared

I am using firefox. The URL window where I type in addresses is no longer there. I can still use bookmarks and also google and find websites that way. However, I want to type in addresses also. How do I get it back?
Also, I have safari on my dock. I try to delete it by putting it in the trash but it refuses. Any ideas? I don't use it at all.

In firefox, have you tried clicking on the view menu. under the view menu there is a sub menu called toolbars. Under toolbars there is an option the navigation toolbar. It should be checked. if it's not, it would explain why you have no address bar.
if navigation toolbar is checked, chose "customize.." a new box will drop down from the firefox window called "you can add and remove items by dragging to or from the toolbars." click the "restore default set" button. then click the done button.

Application specific button on FPM toolbar to call action triggered in view

Hello,
In the content area of my FPM is an ALV with some buttons, e.g. clicking one of the button opens up certain ALV column for editing (for simplicity, I omit the details besides simply enable the columns).
With FPM, I want the button to be placed in the toolbar as a application specific button. How do I achieve the same functionality e.g. from PROCESS_EVENT method calling an action (to open up certain ALV column for editing) via the application specific button placed on the toolbar communicating with the action/method found in the view controller ? Thank you.
Regards
Kir Chern

Hi Arvind,
I tried as follows :
- Create an event in the component controller, say 'MA'
- Within PROCESS_EVENT, raise the event as follows :
data : lo_fpm type ref to if_fpm,
         lo_event type ref to cl_fpm_event.
create object lo_event
     exporting
        iv_event_id = 'MA'.
   lo_fpm = cl_fpm_factory=>get_instance( ).
   lo_fpm->raise_event( io_event = lo_event ).
- In the view controller, create an event handler which subscribe to the event, MA of the component controller.
However, the code in the event handler is never executed despite the event being raised. Not sure how FPM event flow works here.
Can anyone advise ? Thank you.
Regards
Kir Chern

How to call a servlet in new window without toolbar from OA page

How to call a servlet in new window without toolbar from a OA page?Please provide sample code

I have tried with the way suggested in Mukul's blog using javascript in Destination URI property.
I tried to open a OA Page and from which forwarded it to a servlet..
It is showing the error:
Error Page
Exception Details.
oracle.apps.fnd.framework.OAException: The application id or shortname () you entered does not exist.
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1969)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
     at oracle.jsp.JspServlet.service(JspServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:175)
     at oa_html._OA._jspService(_OA.java:96)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
     at oracle.jsp.JspServlet.service(JspServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
## Detail 0 ##
oracle.apps.fnd.framework.OAException: The application id or shortname () you entered does not exist.
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:5391)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:969)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
     at oracle.jsp.JspServlet.service(JspServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:175)
     at oa_html._OA._jspService(_OA.java:96)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
     at oracle.jsp.JspServlet.service(JspServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
oracle.apps.fnd.framework.OAException: The application id or shortname () you entered does not exist.
     at oracle.apps.fnd.framework.webui.OAWebBeanFactoryImpl.getAppId(OAWebBeanFactoryImpl.java:5391)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:969)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:502)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:423)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
     at oracle.jsp.JspServlet.service(JspServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
     at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:175)
     at oa_html._OA._jspService(_OA.java:96)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:385)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:259)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:178)
     at oracle.jsp.JspServlet.service(JspServlet.java:148)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)

How to call report by click application toolbar button?

I need to know the way to call a report by click a button in application toolbar?
BR,
Ali
Moderator message: next time, please (re)search yourself instead of asking basic questions.
Edited by: Thomas Zloch on Aug 31, 2010 11:44 AM

Hi Ali,
Selection-screen function key is used to add push buttons on application tool bar.
Syntax:
selection-screen functuin key<num>
Where num is ranging from 1 to 5.
whenever application toolbat components are added using above statement,tables are defined in the structure "SSCRFIELDS" as "Functxt_01","Functxt_02","Functxt_03","Functxt_04","Functxt_05" for the related function key numbers.
eg:
Tables SSCRFIELDS.
Selection-Screen pushbutton/10(10 lb1 user-command pb1.
Selectiong-Screen Function key1.
Selectiong-Screen Function key2.
Selectiong-Screen Function key3.
Selectiong-Screen Function key4.
Selectiong-Screen Function key5.
Initialization.
sscrfields-Functxt_01 = 'first".
sscrfields-Functxt_01 = 'fifth".
At Selection-Screen.
case sy-ucomm.
When 'first'.
Sumbit zreport.
endcase.
Hope it solves your problem.
Regards,
Amarnath S

Decision popup on click of a custom toolbar button during the call

Hi,
I created a custom button in the CTI toolbar to open up a decision popup. The popup opens fine when i am not in the call whereas if i am in a call the popup doesn't open.
Is this the standard behaviour? If that is the case is there any workaround to open a popup during the call?
Thanks
Selvan

IF param1-value EQ 'ZPOPUP'.
      DATA lo_popup TYPE REF TO if_bsp_wd_popup.
      lo_popup = me->comp_controller->window_manager->create_popup_2_confirm(
                            iv_title          = 'Test Popup'
                            iv_text           = 'Test Popup'
                            iv_btncombination = if_bsp_wd_window_manager=>co_btncomb_yesno ).
      lo_popup->open( ).
      RETURN.
    ENDIF.

In-Call Toolbar

Similar Messages

Maybe you are looking for