In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

What operating system are you using?
Which version of camera raw do you have in photoshop cs6?
After you select the Adjustment Brush, the New button should already be enabled.
Then after you draw on an area of the image, the Add button should be enabled, with the option to choose either of the other two buttons; New or Erase
Could you post a screenshot?
Maybe all the adjustment values are set to zero?
(at least one needs to have a value other than zero)

Similar Messages

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

I'm in Camera Raw and for no reason my adjustment brush will not work. Any suggestions

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

The built-in mic in g50 122ca laptop model is not working. please help me out.

the built-in mic in g50 122ca laptop model is not working. please help me out. OS: Windows Vista (32-bit)

here is a sample code .
so far you procedure looks good but
i bet you have to specify the name of report , instead of 'filename'.
see this
Plist_id := GET_PARAMETER_LIST('P_name');
IF NOT ID_NULL(Plist_id) THEN
DESTROY_PARAMETER_LIST(Plist_id);
END IF;
Plist_id := CREATE_PARAMETER_LIST('P_name');
ADD_PARAMETER( Plist_id, 'P_Receive_date', TEXT_PARAMETER, TO_CHAR(Receive_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_date', TEXT_PARAMETER, TO_CHAR(Hearing_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Hearing_time', TEXT_PARAMETER, TO_CHAR(Hearing_time,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Issue_date', TEXT_PARAMETER, TO_CHAR(Issue_date,'mm/dd/yyyy'));
ADD_PARAMETER( Plist_id, 'P_Workshop_date', TEXT_PARAMETER, TO_CHAR(Workshop_date,'mm/dd/yyyy'));
-- RUN_PRODCT(REPORTS,'..\Reports\Pro_License',SYNCHRONOUS, RUNTIME, FILESYSTEM, Plist_id, NULL);
-- here Pro_License is the name of report.
did you tried to see if the parameter passed using a message ?
try
message('parameter name'); pause; write this before "run_report".

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Can't open my camera raw files in CS6 - using Nikon D7100

I checked for an update as the program suggested and am running Camera Raw 8.4 - also checked and the D7100 is supposed to be compatible with that!
HELP!!

Is 8.4 definitely installed OK? (Help > About plug-in > Camera RAW)
Actually, the D7100 only needs ACR 7.4
Camera Raw plug-in | Supported cameras
Have you tried different NEF files? Have these NEF files been processed in the app supplied with the camera by Nikon? Can you test ACR by taking a RAW shot and opening it in ACR?
I ask because we have seen quite a few instances of corrupt NEF files on this forum.

Camera Raw (8.7.1) is lagging, adjustment brush esp erratic, running on a Macbook Pro (Yosemite 10.10.1) Please help it's driving me nuts!

Hi, Camera Raw keeps stalling / freezing and then doing erratic catch up. It's driving me mad and has made production levels practically zero. Please help!

In a nutshell: Yosemite is a work in progress and full of bugs. Apple doesn't get a major release right until the dot five update or so. Yosemite has a long way to go till it gets to OS X 10.10.5.
Many users have been advised to downgrade to Mavericks.

The microphone on my new inspiron 11 3000 series is not working

All setting have been checked, but the microphone is note working. Please help.

Hello. Go to the support page for your model and download a fresh copy of its audio driver. If the mic still does not work then contact tech support.
You can see a list of all of the Inspiron model names here. There are five Inspiron 11 3xxx models. Click on your laptop's model name to go to its support page. On the page, click "drivers", then select your operating system in the drop down box, and then expand the Audio category.
If you need more help please reply back with the full model name of your laptop and which operating system it has.

Im living in qatar using ooredoo network and the 4g on my iphone 5 is not working please advise

4g on my iphone 5 is not wokring im living in qatar and im using ooredoo network please advise

Look at the page I linked to. It's possible it's out of date, but just because they have LTE does NOT mean that they currently support LTE on the iPhone.
IF they do, the question becomes 'where EXACTLY' did you get the phone?
If it came from another region, for example, the US, it may not be compatible with the LTE network you're trying to use.

My iPhone won't charge and the sleep button does not work, Please Help!

I woke up this morning and my iphone was dead. I have been using the assisted touch setting because one day for no particular reason my sleep button stopped working, so I can't even try a hard reset now. The phone never had a bad drop and the only way it could be water damaged is from being in a steamy bathroom. If anyone has a suggestion as to how to get my phone to work again, Please leave a suggestion!!
Thank you

It could be that your button has justy gone out. You may try getting compressed air to blow out any dust in there. If that doesn't work, you may have to get your button and ribbon replaced.

HT1320 i have tried all of the above to reset my 30gb ipod but its still not working, please help

Hi, i have a ipod classic, it now wont turn on or do anything, i have charged it, toggled the HOLD button and tried all the suggested press and hold, but nothing. Ive tried conecting it to the computer via a USB cable again nothing, its not even showing on my Itunes account when thats turned on.
Any one got any ideas, TIM

Have you left the iPod to charge for a couple of hours and then tried resetting it again? It can take up to at least 30 minutes of charging before an iPod with a dead battery shows any signs of life. By a reset, I assume you mean pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear?
iPod won't turn on
B-rock

In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.?

In camera raw, I am no longer able to use the adjustment brush. This is a recent phenomenon.

Well, it worked fine for me as well for the past couple of years. I had not had any problems using it for the past few years. I use a Mac OS X Yosemite. As far as I can tell nothing had changed. I had not added any new updates, and a week ago the adjustment brush in camera raw simply ceased working. Everything else in camera raw works. However, the adjustment brush is a critical tool. I have checked my permissions, and even repaired my permissions with no results. Of course I have also tried several restarts to no avail.

Grey dot doesn´t appear when using the adjustment brush

In LR5, when I´m using the adjustment brush, the grey circle doesn´t appear. How can I make this dot to appear?
Thank you in advance.

I have just found it!
In the left inferior angle, below the picture I am working with, appears the text "Show Editting dots" (sorry if the text is not exact, I have the spanish version). Then, you have several options (Automatic / Always / Selected / Never). Do select any option but "Never".
Regards

Spot Removal tool should be an extension of the Adjustment Brush

I am glad that LR is taking steps in the right direction to improve the Spot Removal tool with the new Healing Brush feature. However, I agree with others that the interface needs improvement. Though I am probably not the first, I feel I have the solution:
Integrate the Spot Removal tool into the Ajustment Brush tool. Here's why.
I think an improved interface for the Spot Removal brush tool (Q) already mostly exists in the in the form of the Adjustment Brush (K), and indeed the two tools should share the best of their respective features and controls. The current Adjustment Brush has most of the features we are looking for in the Healing Brush:
Pre-brushing Size of brush (already implemented in the Spot Removal tool)
Pre-brushing Feathering control
Pre-brushing Flow/Density control (already implemented in the Spot Removal tool as Opacity)
Partial erasure of selected brush stroke masks, while maintaining the above brush controls (by holding the ALT key in Windows, aided by making the Mask Overlay visible (O))
Pre- and Post-brushing adjustments of each Spot Removal brushstroke for White Balance, Tone (Exposure, Contrast, Saturation, etc), Sharpness, etc.
Adding the above features would be an incredibly useful approach to the Spot Healing tool, and would be a natural extension of the interface we already are familiar with. Both the Adjustment Brush and Spot Removal tools could be further improved by these additional features:
Post-brushing Size of circular brush (already implemented in the classic Spot Removal tool)
Post-brushing Size of painted brushstroke (supposedly already newly implemented in the LR5 Beta Spot Removal tool, though I haven't been able to get it to work on mine)
Post-brushing Feathering control
Post-brushing repositiong of painted brushstroke (already implemented in the classic Spot Removal tool)
In summary, the Spot Removal tool should really be an extension of the Adjustment Brush. They should live in the same control panel (with a Clone or Heal ON/OFF toggle switch). The Adjustment Brush could benefit a bit from the addition of a couple of the existing post-brushing features of the Spot Removal tool.
The two tools are really one tool, they just don't know it yet. Let's introduce them to itself.

A few weeks ago, I posted the silly graphic above. It is a Venn diagram of my interpretation of Lightroom 5 Beta's three main local adjustment tools' strengths, weaknessess, and overlapping powers. Each tool - the Adjustment Brush, the Spot Repair & Advanced Healing Brush, and the Graduated & Radial Filter - has one or more discreete powers or traits. The three tools each overlap a neighboring tool in an important aspect (e.g. the Adjustment Brush and the Advanced Healing Brush can each be used to paint any freehand shape to be adjusted). By default, the descreet "Super Power" of one tool is a "Super Weakness" of each of the other two, which lacks that power (e.g. the user can make additions or partial erasures to any mask overlay with the Adjustment Brush, but neither the Advanced Healing Brush nor The Radial Filter has this power).
In the very center of the diagram is the overlap of all three of the local adjustment tools. In this triple-overlapped zone, there is currently no existing tool. I theorize that there could be a special sort of new local adjustment tool, which combines all of the powers (and none of the weaknesses) of the individual tools of which it is composed. Inspired by the notion of cartoon supeheroes teaming up to combine their powers, I gave it the tongue-in-cheek name "Super Friends Awesomesauce Brush". However, my vision for such a tool is completely serious. Basically, I envision it as an "Advanced Adjustment Brush"
For example:
Paint a shape on the image with a feathered brush. (A transparent colored mask overlay guides the user in the same way that the traditional Adjustment Brush does, as lollololli correctly suggests above as an easier way to paint a selection.)
Pick up that brushstroke with the mosue and place it in another part of the image.
Enlarge or reduce the overall size of the brushstroke with the Size slider.
Increase or decrease the overall feathering of that brushstroke's edges with the Feather slider.
Erase with the freehand erasure brush the portions of the mask that you don't wish to interact with the image.
Convert that brushstroke into a healing repair.
Resize that repair shape larger or smaller, and/or change its aspect and rotation as needed. (Transformations to the shape of the target brushstroke, not necessarily transformations of the shape of the healed or cloned sample pixels)
Increase or decrease the exposure or color temperature of the repair.
Or,
Create a new Radial Filter on the image.
Adjust the exposure, white balance, Gaussian blur, etc. of the filter.
Subtract from that Radial Filter by erasing with a second erasing Radial Filter at the same pin-level
Add back to the Radial Filter with a freehand feathered brush as desired
Or,
Maximise the brush size and minimize the feather setting and paint a solid mask overlay over the entire image.
Convert the mask overlay to a Clone repair - you have now created a second duplicate layer of the entire image on top of the original (BTW you can already do this step with the Advanced Healing Brush set to Clone and size 100 in LR5 Beta).
Subtract from that clone repair with a Radial Filter erasure to create a "hole" that shows the base image underneath.
Make independent exposure, white balance, and sharpening adjustments for both the base image (seen through the Radial Filter subtraction "hole") as well as the cloned top layer.
Reposition and resize the Radial Filter erasure as needed.
Add to and/or erase from either the Radial Filter erasure or the cloned top layer with radial filter shapes or freehand brushstrokes as desired.
I see this proposed Advanced Adjustment Brush as a very powerful localized adjustment tool. Although It really isn't a new tool at all, because it is almost completely based on the existing local adjustment tools. Additional enhancements (more geometric shapes such as polygons) could take its flexibility even further.

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

Please clarify your version of Photoshop.
There is no CC6.
There is
Photoshop CS6
Photoshop CC
Photoshop CC 2014
Also, what is your operating system?

In Camera raw setting of CS6, using the adjustment brush, the new, add or erase buttons do not work. Please advise.

Similar Messages

Maybe you are looking for