In Captivate 7, how can I track which rollover captions are viewed on a particular slide?

I have a slide with multiple rollover captions. I'm trying to figure out a way to track which captions are viewed so that when they have all been viewed, they can advance to the next slide for a quiz. I would also like to show a check mark next to the ones viewed so the user can see which ones are left. I'm not opposed to using check boxes instead of the rollover captions, but then I'd have to figure out a way to get the captions to appear when checked and then disappear. Is this possible?

Sure. The Slidelet has two parts. The rollover area (the trigger) and the slidelet area (what displays when the trigger is rolled over or clicked)
So you click to give focus to the rollover area and look at the properties panel. Specifically, the Actions area. There, you should see an ability to "Execute Advanced Actions".
So you would define an action that would increment a variable (to let you know the area was moused over) and also perform a show of an image of a check mark. (or whatever type of image you want to use to indicate it had been moused over)
You might look at the link below if you need some guidance on advanced actions
Click here to view
Cheers... Rick

Similar Messages

How can you tell which cabinet you are connected t...

As the title says, how can you tell once installed.
the reason i ask is where i live there is only the bt-pcp and the drl-fttc cabinet and no others.
from what i heard is that both BT and DRL occupy the same fttc cabinet, and this would suggest so based on other information received.
yet from other information i'm hearing is that they don't and we're probably wired all the way back to the exchange which i would have thought was a bit odd seeing with 3 miles from exchange (as the crow flies).
so is it possible that they use the same cabs?

hi,
yeh am on infinity now and so far working fine
had one disconnection but thing that was caused by outage as took router a few attempts to re-connect, but other than that my pppoe has only dropped when made a change on router which required it to restart.
now been connected for 8 days without dropping (usually dropped every weekend when on DR) so continuing to monitor.
the engineer advised was connected via the cabinet in street, but only cabinets are the bt-pcp and the dr-fttc cabinets, and AFAIK BT and DR share the cabinet from what I've been previously told, but then someone else has said they won't do that and the connection is probably one that is underground if there is no bt-pcp.
i'll send Dean a message just so i know for future as i know the bt-pcp cabinet my number is connected too.

How can I see which purchased items are not transferred before making an update?

When I try to update I get the:
"There are purchased items on the iPad “Yours iPad” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this iPad. Are you sure you want to continue?"
I have done a back-up and have in iPhotos transferred all non-importated images, so I just don't know what isn't there and what I will loss.
How can I see what it is that I am missing?
Can it have anything to do with that my boyfriend have downloaded some apps using his own apple account, and that these might therefore not have been back-uped?

If the drop-down menus aren't showing at the top of the iTunes screen then control-B on a PC should get them to show
e.g. (screenshot from a Mac)

How can I determine which programs/files are using disc space?

A question for the professionals:
What program on my MacBook Pro can I run to determine which programs and files are taking up the percentage of disc space? I am running at 72 gb, which is great, but I need to know what is using up the rest of it. Thank you in advance to any helpful solutions.
Matthew

activity monitor for RAM (its already in your utilities folder) http://support.apple.com/kb/HT1342. OmniDiscSweeper for hard drive http://www.omnigroup.com/products/omnidisksweeper/ (needs to be downloaded)

HT1338 how can i find which files that are using the most storage?

help please !!! because my storage availability is getting lower !

Try a program such as Disk Inventory X or OmniDiskSweeper.
(70433)

How can we track the entire event in which the form mode gets changed?

If the form is in OK Mode and if the user edits any field(Including UDF Window Fields). form mode changes to Update...So at that time, how can we track the entire event in which the form mode gets changed?
Thanks
Hari

Dear hari angamaly,
You could get the form mode by FormMode Property in ItemEvent Object in UI API.
Best Regards
Jane Jing
SAP Business One Forums team

How Can You Track Your Ipod If Lost Using The Serial Number

How Can You Track Your Ipod If Lost Using The Serial Number?

The find my iphone app has nothong to do with it.
That app simply allow you to find other devices using your ipod. It has nothing to do with fining the device on which it is installed.
If you set up the find my ipod feature that is built into your ipod and the ipod is on and it is connected to wi-fi and it has not been restored, then you may be able to get an approximate street address using icloud.
Othrewise, it cannot be tracked.

How can I tell which catalog a missing image belongs to?

How can I tell which catalog a missing image belongs to?
Beating a dead horse.....Everytime I need "missing images" in LR4.2, I cannot access them, even though I am looking right at the location they presntly occupy because thye image is ALREADY IN ANOTHER CATALOG.
HOW frustrating is this...going on 8 months now. But I need the images and I suppose I could just go back and reprocess 10,000 images that are missing in my collections but I have tried many solutions offered over the months that are just impractical.
So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
Any Ideas?

So Now I want to approach this thing from the other direction...
If let's say one image is already associated with another catalog that houses that collection, ( and the collection is important because it has the edits), i want to go to that catalog instead.
How do I do this?
It sounds as if you have been using separate catalogs for sets of images which are in separate folders. Perhaps you have had good reason to do that. But I would now make three linked observations:
It seems that you are now more able to both find, and distinguish, things via a folder structure - rather than via whatever classification of different catalogs you may have thought were going to be helpful to you
accordingly, having these mutiple catalogs is now getting in your way
using folders works just the same inside one big catalog, as it does inside each of two smaller catalogs.
The solution to the first two, IMO, is to merge your separate catalogs into one catalog. Then the third will kick in. You can still keep the current separate catalogs for archive or reference purposes, but the "Import from Another Catalog" function will MERGE copies of all their contents into a combined, larger catalog that you can use going forward. (The images and folders themselves, do not change in any way when you do this.)
If you wish to track which catalog each image is currently inside, you could apply some kind of keyword across all images in that catalog, before carrying out the merge. However, it sounds to me as if your folder arrangement currently mirrors the different catalogs in some way anyway - and will continue to convey the same information once combined.
Lightroom is designed to be able to work with large numbers of images more or less the same as with small numbers; and this has been anecdotally confirmed in many cases. AFAICT the main performance issue is not the size of the database, but the size and nature of the image data involved and the complexity of things you do with that, per image, also the ability of your computer system to carry these operations out, per image. (Another overall productivity issue is: do you need to keep navigating to and opening different catalogs; or... not!)
Even if you merge catalogs and then change your mind about all or some of that, you can either: retain and go back to the previous un-merged catalogs - or: to preserve further work done since merging, you can use Export as Catalog to copy out a certain highlighted set of images. Then you can Remove what you wish from the main catalog - using the exact same means of identifying which images require this - for example, the image set you have only just exported to a new catalog will still be highlighted inside the source catalog.
RP

How can i track a stolen ipod touch with a serial number?

how can i track a stolen ipod touch (2nd gen, 8gb, 4.2.1)

Lucky you, the only way to get your missing device back is thru a GOOD SAMARITHAN.Remember once the new user puts your device to "ERASE ALL CONTENT AND SETTINGS" and you connect it to your iTunes ,using the new users Apple ID ,everything changes to the new users name,unless you have an Apple Care protection plan which is registered under that serial #.

How can I identify which albums are associated with a specific picture. I used to click on the picture and see the albums but don't know how to do it in 13?

I keep pictures in Albums, specifically by year and then other topic albums. As a result some pictures are in several albums. Sometimes they are assigned in error. I used to be able to click on a picture and see not only the tags but the albums associated with the picture. How can I see which albums are assigned to a picture?

Are you referring to the yellow text box that pops up like this?
If it is those are called tooltips or anchor titles. Cyclosaurus has posted script to block them: removing rollover html detail box: Apple Support Communities.
OT

How can I tell which apps were purchased on my account?

I did search for answers but couldn't find one that fit.
I have an iPhone and so does our son.
Early on my son purchased apps on my account and downloaded them on HIS iphone. Eventually, I got him his own iPhone account and so he has also purchsed apps on his own account and downloaded them on his phone.
When we open iTunes and connect his phone, there is a list of apps that are on his phone.
QUESTION
How can we tell which apps were purchased on HIS iTunes acct and which were purchased on MY iTunes acct?
I don't want to DO anything with the apps, I just want to know one from another.
Thanks in advance!!

List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

How can I determine which computer a share is connected to in /Volumes from terminal or a script?

I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,

Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through

How can i change which iCloud account my phone is connected to

how can i change which iCloud account my phone is connected to

Just go to "Settings > iCloud" scroll down and delete the account, if you don't want to use it on your phone anymore. After you delted it from your device you will be able to sign in again to use another one for iCloud.

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

I have about 5,000 images in a Folder. How can I determine which images are NOT in a Collection?

Create a smart collection with criteria "collection" and "does not contain"; and also with criterion Folder contains (or folder contains all)
That works if you are thinking about a specific named collection.
If you are interested in finding photos that are not in ANY collection, the usual trick is "collection" "does not contain" "a e i o u y"

How does DIADEM import TDMS files? How gets every channel his number and groupindex? How can I determine which channel has which groupindex and number?

I store different channels in a TDMS file.
I like to have a time channel at the first position with group index 1 and number 1.
When I read the TDMS file with DIADEM the time channel (Float64) is on a differernt position, and the channels are not sorted alphabetically.
Here are my questions:
How does DIADEM import TDMS files?
How gets every channel his number and groupindex?
How can I determine which channel has which groupindex and number?
Best regards
Joerg

Hi Jörg,
i suppose that you´re programme whose create the *.tdms file is writing on false position. Try to create datas with timechannel on first indes in diadem, then save it and then open it again. you see that all is correct. So please tell me what programm in what version do you use and please attache it here.
Did you use the library for creating *.tdms files like in the link ?
http://zone.ni.com/devzone/cda/tut/p/id/6471
Here you find the gtdms_8.x.zip - when you extract it and opened the *.llb you find vi´s for all functions e.g. writing 2d array of strings to *.tdms file
when you open the subvi´s then you see how created and writing datas/structure to *.tdms files. Because *.tdms is binary you can´t see structure with open it in editor.
When you don´t have Labview you can use the 30 days test of current version 8.5 under following link
german version download link
https://lumen.ni.com/nicif/d/lveval/content.xhtml
english version download link
https://lumen.ni.com/nicif/us/lveval/content.xhtml
Hope it helps
Best Regards

In Captivate 7, how can I track which rollover captions are viewed on a particular slide?

Similar Messages

Maybe you are looking for