In CC bridge, I get a blank output pane

In CC bridge, I get a blank output pane, tried installing the module...no luck

Yes I have that installed, I downloaded the .zip file, and followed these instructions:
Download the appropriate file below by right-clicking (Windows) or Ctrl+clicking (Mac OS) and choosing to save the file. Save the file in a location you can remember, such as your Desktop.
AOM_Package_Win64.zip<install-output-module-bridge-cc/_jcr_content/main-pars/download/file .res/AOM_Package_Win64.zip>
Windows 64 bit
AOM_Package_Win32.zip<install-output-module-bridge-cc/_jcr_content/main-pars/download_0/fi le.res/AOM_Package_Win32.zip>
Windows 32 bit
AOM_Mac_New.zip<install-output-module-bridge-cc/_jcr_content/main-pars/download_1/file.res /AOM_Mac_New.zip>
New module for Mac OS
1.      Double-click the downloaded file to decompress it. Open the resulting AOM_Package_Mac, AOM_Package_Win64, or AOM_Package_Win32 folder. This folder contains:
the Adobe Output Module folder
the AdobeOutputModule.workspace file.
2.      Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:
Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions
3.      Copy the AdobeOutputModule.workspace file into the Workspaces folder under the Bridge CC Extensions folder.

Similar Messages

How do you get JSF to output a blank td

Hi Folks !
I am trying to get a row output from JSF panelgrid like this:
<td class="ruler"></td>
f:verbatim that outputs <td> doesn't have styleClass atribute.
Any help would be appreciated.
thanks,
-Sanjay

Thanks. Is this implementation dependent ? I am using JSF 1.2 RI and when I put <h:panelGroup styleClass="ruler" />
I get:
<td><span class="ruler"></span></td>
I am looking for <td class="ruler"></td>
BTW all this to display a horizontal ruler. From css file:
.ruler { background: #003366; height: 4; }
thanks,

Sales Analysis Report - Monthly report shows blank output

Hi,
When i run the Sales Analysis Report - Customer (Annual) report for a data set it shows the correct data - large number of invoices
However, there is no output available (blank output) when i use the the Monthly version of the same report using the same parameters. Even when i am taking the widest possible range of data sets ( large date range; no properties; All customers) i am not getting any output. I am using Individual display.
Please help out.
Regards.
Edited by: Manish Chaturvedi on Jul 14, 2009 11:56 AM

hello
In sales analysis report have u given posting date for a particular month if not give and select client /customer in group and run the report u will get exactly if not then u do have any postings for a particular month and definr due date that means posting period also
regards
jenny

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

When I open safari, I get a blank page and the beach ball.

When I open safari, I get a blank page and the beach ball. If I try to go to a website, it will load up to a certain point sometimes—the .com of www.facebook.com for instance—but other times, nothing at all.
I've fixed this once before by deleting some files in the library folder—extensions & preferences I believe—and choosing not to have plug-ins selected, then restarting the whole computer—rather than just safari. It will work fine for a day, or maybe 3 at the most, before I have to repeat the process all over again. I'm sure it's because I usually put plug-ins back on once I get it to work, because you can't really use the internet without using plug-ins. But I'm using Chrome right now, as I do when I'm too lazy or too in a rush to try the whole process of getting safari to work again, and I don't have a single issue with it.
My question is really, what plug-in could cause this to happen repeatedly? It's not like I'm going to websites that may have malware on them. I spend most of my day going to some of the most visited websites on the internet.
Is there a known bug out there, because Java has been overrunning concurrently with this happening. It's CPU % runs around 100. I quit the process, but it doesn't change anything. So, other than the fan turning on, I have not had any popup telling me that safari has crashed, that I'm not connected to the internet, or that something went horribly, horribly wrong. I'm pretty sure Safari things it's running fine, but it's not.
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Assignment Field Get Cleared(blank) During Automatic Payment Run(F110)

Hi all,
We have a senario that during the creation of AP invoice, the Profit Center is entered in Assignment field ( BSEG-ZUONR) in FB01.In the invoice document the assignment field value correctly copied into Profit center (BSEG-PRCTR) based on a subsititution rule.
But during the payment document run (F110) the assignment field is get cleared (Blank).and in REGUP table, the Assignment field get populated correctly.
By displaying the payment document using transaction code FB03, the assingment fields is empty.ie field BSEG-ZUONR is empty. .
We have checked all the subsititution rules defined in the system and none of these causing the problem. We suspect there are some hidden subsititution or configurations in SAP that affect the assignment. We also checked the sort key is not the cause of it.
Have anyone encounter the same scenario why the Assignment field get cleared(blank) in Payment document. Please kindly share.
Regards
Riaz

Hi,
I think you are trying to Run Automatic Payment Programme with Check Management and you want to Print check and payment summary.
Kindly check if you have defined SAP Scripts in FBZP Payment Method in Company Code.Select a Co Code and double click on payment method eg C-Cheque, their is a section called FORM DATA you need to input Scripts for the same so that the Payment Programme prints output as defined in the SAP Script for Checks and payment advice
Regards
Rahul

Cl_gui_alv_grid - I get a blank screen

I seem to be having a problem with my screen. The issue is that I am using cl_gui_alv_grid to display an ALV. However, I call set_table_for_first_display, I get a blank screen. I have verified that I have data in the field cat, outtab, and sort tables. Any ideas?
SCREEN 2000
PROCESS BEFORE OUTPUT.
MODULE status_2000.
MODULE create_fieldcat.
MODULE create_obj.
MODULE call_alv.
PROCESS AFTER INPUT.
module user_command_2000.
module exit at exit-command.
MODULE STATUS_2000 OUTPUT.
SET pf-status '2000'.
SET TITLEBAR '2000'.
ENDMODULE.                 " STATUS_2000 OUTPUT
*&      Module CREATE_FIELDCAT OUTPUT
*       text
MODULE CREATE_FIELDCAT OUTPUT.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'PSPID'.
    wa_fieldcat-tabname = 'IT_CONTRACT'.
    wa_fieldcat-ref_field = 'PSPID'.
    wa_fieldcat-ref_Table = 'PROJ'.
    wa_fieldcat-KEY       = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'POST1'.
    wa_fieldcat-tabname = 'IT_CONTRACT'.
    wa_fieldcat-ref_field = 'POST1'.
    wa_fieldcat-ref_Table = 'PROJ'.
    wa_fieldcat-KEY       = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'SO_VALUE'.
    wa_fieldcat-coltext   = 'Sales Order Value'.
    wa_fieldcat-do_sum    = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'BILLED'.
    wa_fieldcat-coltext   = 'Amount Billed'.
    wa_fieldcat-do_sum    = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'NEBTR'.
    wa_fieldcat-coltext   = 'Cash Received'.
    wa_fieldcat-do_sum    = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'DMBTR'.
    wa_fieldcat-coltext   = 'Retention'.
    wa_fieldcat-do_sum    = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_fieldcat.
    wa_fieldcat-fieldname = 'PERCENT_BILLED'.
    wa_fieldcat-coltext   = 'Percent Billed'.
    wa_fieldcat-no_sum    = 'X'.
    APPEND wa_fieldcat TO it_fieldcat.
    CLEAR wa_sort.
    wa_sort-spos = '1'.
    wa_sort-fieldname = 'PSPID'.
    wa_sort-SUBTOT = 'X'.
    APPEND wa_sort TO it_sort.
ENDMODULE.                 " CREATE_FIELDCAT OUTPUT
MODULE CREATE_OBJ OUTPUT.
IF g_custom_container IS INITIAL.
    CREATE object g_custom_container
    EXPORTING
      container_name = 'CCONTAINER'.
    CREATE object grid
    EXPORTING
      i_parent = g_custom_container.
    CREATE object g_handler.
    SET HANDLER g_handler->top_of_page FOR grid.
ENDIF.
ENDMODULE.                 " CREATE_OBJ OUTPUT
MODULE CALL_ALV OUTPUT.
    CALL METHOD grid->set_table_for_first_display
    EXPORTING
*    i_buffer_active               =
*    i_bypassing_buffer            =
*    i_consistency_check           =
*    i_structure_name              =
*    is_variant                    =
*    i_save                        =
*    i_default                     = 'X'
*    is_layout                     =
      is_print                      = wa_print
*    it_special_groups             =
*    it_toolbar_excluding          =
*    it_hyperlink                  =
*    it_alv_graphics               =
*    it_except_qinfo               =
*    ir_salv_adapter               =
    CHANGING
      it_outtab                     = it_contract
      it_fieldcatalog               = it_fieldcat
      it_sort                       = it_sort
*    it_filter                     =
    EXCEPTIONS
      invalid_parameter_combination = 1
      program_error                 = 2
      too_many_lines                = 3
      OTHERS                        = 4
    IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
Regards,
Davis
I believe the problem may be that I don't have the container in the attributes list of the screen. I am not sure why it isn't there.

I did, if this is what you mean:
MODULE CREATE_OBJ OUTPUT.
IF g_custom_container IS INITIAL.
    CREATE object g_custom_container
    EXPORTING
      container_name = 'CCONTAINER'.
    CREATE object grid
    EXPORTING
      i_parent = g_custom_container.
    CREATE object g_handler.
    SET HANDLER g_handler->top_of_page FOR grid.
ENDIF.
ENDMODULE.                 " CREATE_OBJ OUTPUT
Regards,
Davis

How to get a blank insted of 00.00.0000 for Dates in Bex

Hi,
For One of the DATE (Key Fig) fields in Report, iam getting an output as 00.00.0000, if there is no date available in the data.
Could be pls suggest me as how we can get a blank insted of 00.00.0000.
I have tried it as, Query Designer-> Properties -> Zero value display ->select the option "suppress zeros". But it is not working for dates.
Your answers will be rewarded with great pleasure.
Thanks..

hi Krish,
have a look at this thread.
Re: How to show 00/00/0000 as blank in BEX?
regards.

Help require to get the XML output to design template- JDE

Hi Friends,
I am asking this question from JDE perspective.I want to design XMLP Template for R40572 Check Printing.
When I upload an blank template and after attaching RD, When ever I initiate a check from P04572 Application.RThe Write Row exit will lead to check printing which in turn will call a batch R04571 and this batch will call R04572(Which I require the XML output) since it is the second report and we cant direct it to local server I am not able to get the XML output..
Another think is since its running in server i think its not taking the RD modification we done in loacl because it always fires PDF .

Hi,
I assume you're Using XMPOSA for generating the files locally. What I suggest is, you set the application to run with the report definition by default. That way, even when it is called, it will be called along with the report definition. You can take the resultant XML file from P95630
hope this helps,
-Domnic

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

In iTunes prefs>Store - is the Store check box unchecked?
Did you repair pemissions with Disk Utility?
MJ

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Tried installing Windows Vista, cancelled install and now it won't boot from the OEM Vista DVD, all i get is BOOTMGR is missing error... Ctrl Alt Del to restart and when i turn the computer on i get a blank screen and pressing C is not working to boot....

Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!

Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully.

When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud. I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file). I don't want to log in

When I try to open an image by double clicking on it in Bridge, I get a message telling me to log in to Creative Cloud. I am running CS6, and the default should be to open files in Photoshop 6 or in Adobe Raw (if it's a Raw file). I don't want to log into CC since I am not a subscriber, and this means that I have to work around, and go back to Bridge, and tell it to open the file in Adobe RAW. However, this does not work for older psd files which for some reason cannot be opened in RAW. How do I return to the process of simply allowing RAW files to open automatically in Adobe RAW, and simply right clicking on the image in Bridge to bring up the option of opening it in Photoshop?

<moved from Adobe Creative Cloud to Bridge General Discussion>

Reg : data is not getting in the output

hi team,
             data is not getting in the output, but it is getting in the debug mode
REPORT ZSAPP10 .
*tables : pernr.
TABLES : PA0001.
type-pools : slis.
types : begin of itab,
        pernr type pernr,
        orgeh type orgeh,
        abkrs type abkrs,
        end of itab,
        begin of itab2,
        pernr type pernr,
        vorna type pad_vorna,
        nachn type pad_nachn,
        end of itab2.
parameter : p_pernr like pa0001-pernr.
*DATA: g_cprog tYPE SY-CPROG.
data : i_itab1 type table of itab initial size 0,
       i_itab2 type table of itab2 initial size 0.
data : w_itab type itab,
       w_itab2 type itab2.
data : t_fieldcat type slis_t_fieldcat_alv,
        w_fieldcat type slis_fieldcat_alv.
data : t_event type slis_t_event,
        w_event type slis_alv_event.
data : t_listheader type slis_t_listheader,
       w_listheader type slis_listheader.
*get pernr.
w_event-form = 'TOP_OF_PAGE'.
w_event-form = 'sub1'.
append w_event to t_event.
w_listheader-typ = 'H'.
w_listheader-info = 'this is new top of page'.
append w_listheader to t_listheader.
select pernr
       orgeh
       abkrs from pa0001 into table i_itab1 where pernr = p_pernr.
w_fieldcat-col_pos = 1.
w_fieldcat-seltext_m = 'personnal no'.
w_fieldcat-fieldname = 'pernr'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 2.
w_fieldcat-seltext_m = 'org. unit'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'orgeh'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
w_fieldcat-col_pos = 3.
w_fieldcat-seltext_m = 'payroll area'.
w_fieldcat-tabname = 'i_itab1'.
w_fieldcat-fieldname = 'abkrs'.
w_fieldcat-outputlen = '20'.
append w_fieldcat to t_fieldcat.
*g_cprog = SY-CPROG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
           I_INTERFACE_CHECK                 = ' '
           I_BYPASSING_BUFFER                =
           I_BUFFER_ACTIVE                   = ' '
             I_CALLBACK_PROGRAM                = SY-CPROG
           I_CALLBACK_PF_STATUS_SET          = ' '
           I_CALLBACK_USER_COMMAND           = ' '
           I_CALLBACK_TOP_OF_PAGE            = ' '
           I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
           I_CALLBACK_HTML_END_OF_LIST       = ' '
           I_STRUCTURE_NAME                  =
           I_BACKGROUND_ID                   = ' '
           I_GRID_TITLE                      =
           I_GRID_SETTINGS                   =
           IS_LAYOUT                         =
             IT_FIELDCAT                       = T_FIELDCAT
           IT_EXCLUDING                      =
           IT_SPECIAL_GROUPS                 =
           IT_SORT                           =
           IT_FILTER                         =
           IS_SEL_HIDE                       =
           I_DEFAULT                         = 'X'
           I_SAVE                            = ' '
           IS_VARIANT                        =
             IT_EVENTS                         = T_EVENT
           IT_EVENT_EXIT                     =
           IS_PRINT                          =
           IS_REPREP_ID                      =
           I_SCREEN_START_COLUMN             = 0
           I_SCREEN_START_LINE               = 0
           I_SCREEN_END_COLUMN               = 0
           I_SCREEN_END_LINE                 = 0
           IT_ALV_GRAPHICS                   =
           IT_ADD_FIELDCAT                   =
           IT_HYPERLINK                      =
           I_HTML_HEIGHT_TOP                 =
           I_HTML_HEIGHT_END                 =
           IT_EXCEPT_QINFO                   =
         IMPORTING
           E_EXIT_CAUSED_BY_CALLER           =
           ES_EXIT_CAUSED_BY_USER            =
             TABLES
             T_OUTTAB                          = I_ITAB1[]
          EXCEPTIONS
            PROGRAM_ERROR                     = 1
            OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
      FORM sub1                                                     *
FORM sub1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = t_listheader
I_LOGO                   =
I_END_OF_LIST_GRID       =
ENDFORM.                                                    " sub1

write this way...
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
        i_callback_program                = w_repid
        is_layout                = wa_layout
        i_callback_user_command = 'USER_COMMAND_ACCT'
        i_grid_title             = 'Document Status Report'
         it_fieldcat                       = it_fcat[]
     IT_SORT                        = IT_SORT[]
         it_events                = it_events
         TABLES
           t_outtab                        = it_final_data[]
      EXCEPTIONS
        program_error                     = 1
        OTHERS                            = 2.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it. I also cant delete anything from this folder because of it. Any help would be greatly appreciated.

Hey Allen,
I am having the same issue here in September. How did yor situation get resolved. My iPad Siri works great. My iPhone 5 Siri has been out of comission (OOC) for almost a month and I am beginning to get a little frustrated since Siri works so well in July....ANY assistance would be highly appreciated... Thanx

In CC bridge, I get a blank output pane

Similar Messages

Maybe you are looking for