In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?

In CC214 PS Why has adobe removed the "print Size Button"  And why have they made the Brush preview window so small you can't see the effects to accurately adjust them?
These two things need to be remedied in their upgrades because It's become such a bother I've had to revert to older versions of PS.

Yea, and it's a pain to get to.  What was the rational for removing the print size button?   With the magnifying glass tool selected in older versions of Photoshop you would get a button that says "print size" right next to Actual pixels, Fit Screen, Fill Screen. Now I have to go out of my way and dig for it if I want to see the print size.  Of all the buttons you could have taken away, why not fill screen?  I never use that.
Besides the point I just downloaded the Oct Upgrade for PS and surprise! Nothing has changed and these are two big black eyes on newer versions of Photoshop.   The Brush preview window is  unchanged in CC but in CC2014 it's basically worthless.  If you apply a texture to a brush you can't properly see the scale of the texture, the spacing, scatter, etc...

Similar Messages

  • I have 15.00 on my itune gift card but when i try to download a song it`s saying the card has already been redeem,but you can still see the 15.00 at the top of itunes

    i have 15.00 on my itune gift card but it`s saying the card has been redeem but i didn`t buy  anything yet.You can still see the 15.00 in on my itunes.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?

    I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?

    Red21Gerard wrote:
    I have an iPhone 4s. My problem is that I can't see the icon of FaceTime and iMessage. I need to use these apps. What should I do?
    FaceTime:
    Check Settings>FaceTime>ON and check Settings>General>Restrictions>FaceTime>ON.  There is no icon, on the 4 & 4S FaceTime is accessed through contacts.  Go into your Contacts, access the contact you want to FaceTime with and you will see a tab at the bottom of their contact card.  You can also access FaceTime by going into your Phone app, select dialling keypad, dial number, press call and an option for FaceTime on the keypad will appear.   It should be noted that FaceTime has been removed from iPhones sold in some Middle Eastern countries at the express wish of the respective Governments.
    iMessage:
    Check Settings>Messages>iMessage>ON.  The icon is the same as your SMS icon. This support document will explain how to use iMessage http://support.apple.com/kb/HT3529

  • Is there a way to delete an app when you can't see the app's icon?

    Is there a way to delete an app when you can't see the app's icon? I have so many apps that they don't all show up on the existing screens. I know it can be done by connecting to a computer and using iTunes, but I'm on the road away from my Mac.

    I tried that and instead of showing me the inaccessible screens, it just shortens the number of available screens. Then if I reset the home screen in preferences it removes the folders I created and I'm back to square one.

  • The screen of my MacBook Pro itself periodically switches the color. That is, with the usual colors, on some blue. What to do? Should be repaired, or you can figure out the most? HELP ME PLEASE!

    The screen of my laptop itself periodically switches the color. That is, with the usual colors, on some blue. What to do? Should be repaired, or you can figure out the most? HELP ME PLEASE!

    LambChops1,
    I’m using Mavericks, and it’s still possible to select text to drag and for cutting and pasting. Left-clicking and right-clicking is still possible, too.
    Try opening the Trackpad pane of System Preferences, and select the Point & Click tab. To right-click, ensure that your “Secondary click” checkbox has been checked; the small print under “Secondary click” is a dropdown menu which allows you to select the form of right-clicking that you prefer. (For instance, mine is set to “Click in bottom right corner”.) For left-clicking, is your “Tap to click” checkbox checked, or unchecked? (Mine is unchecked, since I prefer pushing for left-clicking over tapping to do so.)

  • I am trying to take a picture of a web page and paste on a one drive powerpoint. I tryed pressing the print screen button, and pasting. But it is giving me message saying that my browser can not fine the clipboard, and I need to use the keyboard shortcuts

    I need to take a picture of a web page, insert it onto a powerpoint online, and crop the picture. I am pressing the print screen button, and right cliking paste. But I am getting the warning message saying that my browser can not use the clipboard, and I am unsure of how to take a picture, then paste it, and crop it all on to a power point.

    http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

  • HT204053 How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone?  Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't

    How to I get music I purchased before the iCloud was created to show up on my new authorized iPhone?  Right now I can only see the Apps I recently purchased on the actual phone but older music I purchased on my CPU using the same Apple ID doesn't appear.

    Does any music show in the Purchased tab on the iTunes store app on your phone ? Music can't be re-downloaded in all countries, and even where it can be it will only appear whilst it remains in the store. Do you have your purchases on your computer and/or on a backup of your puchases so that you can sync them to your phone ?

  • My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

    My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything,  I have a child that is very ill and I have to have access to a phone at all times can someone help me?  It happened one other time when I plugged it in to my to listen to music.  I know it is working it said something on voice control.  I tried the press the circle button and the top button but the screen only turned white?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • How do you close an information window when you can't see the close button?

    One of my Macs is a trusty old G3 iMac and since version 8 I've had a problem with the information window you get for podcasts when you click on the 'i' button. The window goes to the full screen height, in fact it goes beyond because you can't see the top and button. Therefore I can't close it with the mouse or move it.
    I also can't find a keyboard shortcut that will close this window, so I have to exit iTunes and re-start, which on this machine is a slow process.
    Anyone help welcome - is there a keyboard shortcut?

    Meg St._Clair wrote:
    If, on the other hand, you're talking about the Info window you get when you click on the little "i" next to the description, that can be closed using the standard Mac keyboard short cut of Command-W.
    Thud...thud...thud...
    ...that's the sound of me hitting my head on the keyboard. I never knew about Command-W because, you know, it's only a menu option IN ALL THE APPLICATIONS I JUST LOOKED AT!
    Oh well...you learn something every day...and I would like to point out that if you use OSX Leopard's help system and search for "keyboard shortcuts", Command-W isn't mentioned.
    Thanks again!

  • I bought a new super zoom lenses for iphone which is attached to the iphone but you can still see the outside of the lenses through the viewer

    I purchased on-line a new Super Zoom for my iPad and iPhone. when I attached the iPhone lense to the iPhone, there seems to be a problem with the view. You can still see the outline of the lense and it is not a clear view looking through. Can you hep

    Only the carrier can officially unlock it for you

  • Why has my b210 stopped printing apps. emails and other ok.

    i just bought a photosmart b210 and it worked fine. having lots of fun printing stuff off the apps etc. sent an email incl pics and they were fine. now it wont print apps anymore - takes ages and then just goes back to the main menu page. it print from word still. any ideas?    
    Well - just to update, I finally got it to print but the eprint centre keeps telling me it is not connected when it is and I cant find a way to try to reconnect it. any clues at all??

    Hello hilaryp2,
    I am sorry that you are having this issue with printing from apps!  Based on your post there are a couple of reasons why this could be happening.
    Your Internet Service Provider could be busy or updating servers.
    The specific app may be receiving updates.
    The ePrint servers could be receiving updates.
    The router could be faulty or malfunctioning.
    The printer itself could be malfunctioning.
    It is not common for it to be the last two reasons in the list since ePrint and apps have been working fine.
    It is more common that one of the services are being updated or upgraded.  Here are some generic suggestions to help resolve your issue.  Try the desired print action after each step has been taken.
    You can power cycle the unit.  (Unplug the unit from the back and the power source for 30secs then plug then printer back in and power on)
    Wait for 2-4 hours for services to be updated or upgraded.
    Reset network defaults on the printer. (Not Factory Defaults)  This will cause you to reconnect the printer to the network again using the Wireless Setup Wizard.
    If these steps do not resolve the issue please post again with further details.  I will be glad to assist you further if necessary.  Thanks!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • TS1363 what if you can not see the iphone in the devices?

    I have tried everything to try to get the iphone to connect but windows will not recognize it even as a mass storage device.

    The reset link will only appear if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account. If you don't have one (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get the questions reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use, or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Why Has Adobe Removed The Option For Individuals To Purchase Software And Not Use The Cloud?

    As an individual who has been using Adobe products for about 25 years for my personal use and not as a business, I find the new policy of "renting" the software and using "The Cloud" for, at least in my case, a prohibitive monthly fee, to be totally unacceptable and will result in my no longer being able to afford using Adobe products.   I do not understand why Adobe cannot offer their new cloud program for individuals and companies that may wish to use the new system and have the resources to pay in perpertuity, but they should also have the option for those of us who would rather purchase upgrades for whatever programs we use and keep them on our computer without "The Cloud" service.
    I am 67 years old and living on a fixed income.  I basically use four adobe programs... Photoshop, Premiere, After Effects, and Audition as I do volunteer work at a local non-profit radio and tv organization.  If I were to "rent" those individually it would cost $80 per month... so I could take the next deal and get access to all software for $50 per month... I cannot afford either of those.  If I could upgrade one or more of the  programs every two or three years... keeping them on my computer and not using "The Cloud," then continuing to use the products would be doable.  However, being forced into a program that requires a monthly fee and use of "The Cloud" which I do not need to use, seems totally unfair.   I certainly understand that there are  businesses and individuals who will love the new program, but why not have the option?  Or perhaps a "Senior" discount as you do for educators and students?
    Something to think about.  It seems Adobe may be moving to the "Cable Television" model of monthly fees that will go no where but up.

    Hey there, you may have heard that Adobe is continuing to sell and support CS6 for customers who prefer traditional licensing.  It's last year's version instead of the latest-and-greatest CC release, but it's something to consider if that's important to you.
    As far as a "senior discount" on Adobe software, there has never been one – but one thing to consider is becoming a student or teacher because there is no age restriction on that, in which case you may become eligible for education discounts.
    Hope this helps.

  • I currently have a one year old MacBook Pro, and right when I boot up the system, the kernel_task is using about 1GB of the 4GB of RAM that I have. Is this normal? Or if not, how can I reduce the kernel_task?

    I have noticed that my computer is running super slow, even when I only have one application (like Chrome) running for a short amount of time.

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the system log for messages that may indicate a hardware fault. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|nspace-h|n Cause: -' | tail | open -ef
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V).
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • The new ios7 update I can't size my wallpapers anymore. They are all way too big for the screen. Before I would just pinch to size it however I wanted and now it won't do this anymore. Really ***** because now you can't see the wallpapers fully.

    Before the ios7 update we uses to be able to size our wallpapers backgrounds we choose to be the size we desire to fit our screen. Now we can't do this. Why? Is it something they left out for some reason or is there something I'm doing wrong?

    Yes you can delete those temporary files as long as you've saved any changes you've made back to the main document. So I'd open the document with the same name without the ~ and hidden file attribute and make sure it's the way you want it. Then you can delete the temporary file. 
    The key command you want to enlarge text in internet explorer holding down command and hitting the =/+ key. Conversely the command and - key makes text in internet explorer smaller.

Maybe you are looking for