In Change Request Making a default subject

Dear all,
We are using SOLMAN 4 and SCM functionality.When we create a change request from charm_create transcation,i want to set in the subject line Urgent correction as default.How can we this?please help
Thanks in advance,
Avinash

Dear Henry,
I was not able to find a straight way to do that,but found a way around.
When you see the drop down menu of Subject,first it displays the codes of implementation cycle and then of Maintenance cycle.So to make the Urgent correction as the default one,i spro Soluman->Scenario-Specific Settings->Service Desk->Define code Groups and code for Catalogs (for catalog IB)changed the status of implementation in to "InProcess" from "Released".By this Urgent correction comes as the Default.In our case we are not using Maintenace Project for Change Management and so we are not having any problem by doing this.
If you are not using Charm for Imple. proj, you can do this.But as i told you it is not the straight way to do this.
Revert for any clarification.
Thanks and Regards,
Avinash.

Similar Messages

Creating Change request from an Issue

Hi, all.
We have created new transaction type for change request (SDCR at default) and have specified it for usage in parametre CHANGE_REQUEST in DNO_CUST04.
However, creation of a change request from a issue (problem) ignores this customisation. As has shown code research - the constant there is used.
Whether there are to it reasons or notices in the documentation?
Whether there was for you such problem and how you solved it?
Regards,
Konstantin

You need to maintain Transaction Types Mapping. Map your target procedure type (ZDCR) to your source procedure type (e.g. SLFN or ZLFN).
Do this in IMG task "Define Mapping Rules for Copy Control"

Subject field while creating the change request

Hi All
I want to populate the subject field in the change request by default.

Hi
The automatic population of the subject field while creating the CR through folloup transaction from Support message.
Regards
Kumar

How to set a default target system in a change request

Hello,
I would like to set up a default value for the target system when I create a change request,
for example, if I create a CHR in "DEV" system, it would auto fill the "Target" field with "TST"
I tried to look for TPPARAM parameters or some Global ones,
but with no luck
Anyone got a clue how to do it?
Thanks.

Hi Elhanan,
The next system depends on the transport route.
and the transport will follow the route assigned. this again depends on the transport layer assinged to the development package of the object.
so the assignment is like this.
Dev object > Development package (previously called dev class) > Transport layer > Transport Route
for more information, please see the help.sap.com software logistics part.
http://help.sap.com/saphelp_nw04/helpdata/en/60/e3fcfae36811d184810000e8a57770/frameset.htm
Hope this helps,
Debasis.

Change Request - Delete / Hide Subject

Dear All,
While creating CR using crmd_order for maintainance project, we have 3 subjects viz,
1. UC(maint)
2. Normal correction(maint)
3. Admin correction(maint)
Now I want to delete / Hide the 2nd one, Normal correction as we are not using this one.
The problem is for testing purpose we have created 4-5 documents using this normal correction & when i tried to delete this in spro >> Scenario-Specific Settings >> Change Request Management >> Extended Configuration >> Change Transaction >> Transaction Types >> Catalogue, Codes and Profile
system is throwing error as *Code 0020 is in use and therefore cannot be deleted
Message no. Q3221*
How can i hide or delete that entry, so that while creating CR, user should not select that option.
regds,
CB

Hi Channabasappa.K ,
You can create a custom transaction type from the standard ones by doing a copy as and then you can make the below mentioned desired configuration.
You will not be able to delete the existing change documents which you have created.
Let me know if you have any queries regarding the above.
Regards,
Sneha Vyas

Change Request SDCR - Sold to Party has to appear by default from IbaseComp

Hi,
TCode: CHARM_CREATE
In this screen I dont want to enter the Sold to party.
'Sold to party' has to come by default based on the IBase Component entered In Change Request SDCR Transaction. Is there any setting for the same.
In case of support desk when we create a message, sold to party comes automatically, Bcz in IBase Partner Sold to party is maintained. Like this can we make it for Change Request(SDCR) transaction.
Regards
Praveen Khot
+91 9724035023

Hello Praveen,
To make the "Sold To Party" be determined from the IBase in the SDCR, you have to adjust the partner determination procedure SDCR0001 using the same access sequence for "Sold To Party" than in the partner determination procedure for the SLFN (i.e. 0018 SAP Service: Determination via IBase/Ind Object from Ref. Object Set).
Then in CHARM_CREATE, leave the "Sold To Party" field blank. It will be populated during the creation. Go to CRMD_ORDER to check the assignment.
Hope this helps.
BR
Stéphane.

Change default subject in simple form

Hi! I am wondering if there is a way to change the default subject "new form submission"inthe email that is sent through the form?
Many thanks,
roula

In this case, when you export the site as HTML, you will need to get to scripts folder > open "form-u75.php" file and have the changes made in the same, please take a look :
I hope this helps.

Change Request - subject is Normal Corre. but its creating Correction SDMI

Hi,
When I am authorizing the Change Request(SDCR) it is creating Correction(SDMI) insted of Normal Correction (SDMJ).
Even though I am selecting subject as Normal Correction (Maintenance). what could be the reason ?
Regards
PK

Dear Prakhar,
Many Thanks. The problem is solved. I have run the same BC set & its working fine.
The problem is that this is the second time I am facing the Issue & it disappears after BC set is run every time.
I dont want every time to run the BC set, because if I do any customization & run BC set then it will remove the customized things.
Regards
PK

Default transport under Local change request

Dear Friends,
I am trying to transport objects from dev to QAS. i catch hold of the object, create transport request. By Default they are getting assigned to Local Change Requests instead of being assigned to Modifiable requests under target system. (in SE09)
how can i change the default from local change request to Quality.
Regards
Paddy

Thanks Edwin,
this is what i am doing now. But, by default i want it to be set in Quality--> Modifiable.
Everytime going to settings and changing it does not seem to be a permanent solution.
Request your earliest response.
Rgds.

Reg Change request

Hi ,
i am workin on SAP 4.0 B version, for few programs i have made some changes and when trying to assign a change request to the objects its by default creating a 'Local change Request'..
Tried to change the development class on advice of my basis consultant but it didn't allowed me to change that...and in the attributes i can find a Source systems such as T14 and D71 etc..is it something to do with the source systems...since we don't have the original systems now..
Is there anything we can do in table TADIR like making the repair flag as X and making the changes ??
Or something else i need to look into
Looking forward for your suggestions..
Regards
Syed

Hi,
Goto Tcode se03 .
Navigate to Object Directory --> change object directory entry.
type ur package and .
tick the Program and fill ur program name.
execute .
now click on arrow icon . change ur original system.
now u can change ur development class.
Regards,
Ballack.
Reward Points if helpful.

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

Change Request Management in Implementation projects or not?

Hello guys,
We are starting a Change Request Management project at a customer. We discuss in the blueprint phase whether we should be using it only for maintenance activities, and not for implementation projects. We have some people that can be working both in maintenance and also in projects at the same time.
We want to understand whether that scenario is possible and also whether is advisable. We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
What are the drawback, difficulties, considerations you may consider in making that decision? Is it logic to work that way or is it better just to implement it for the whole installation, including implementation projects?
Esteban Hartzstein
Edited by: Esteban Hartzstein on Jan 20, 2010 3:37 PM
Edited by: Esteban Hartzstein on Jan 20, 2010 3:39 PM

We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
this you can do either via SE03 / Display/Change Request Attributes / SAP_TMWFLOW Request created using Change Manager X X / Defaul for all client = Mandatory
or
you can achieve this by just activating the CHaRM in SolMan ( solar_project_admin / system landscape / CHARM)
Nesimi

Change Request demanded while creating a Sales Order

Dear All,
I am creating a Sales Order. The solution is using user exits to communicate between SD and TEM.
Whenever we create a Sales Order its corresponding sales order and line item is updated in TEM table HRVPAD25.
While saving the Sales Order, its asking for a Change Request which is by default the Customizing Request created for functional configuration of that particular solution.
Sales orders however are created successfully.
Can anyone throw some light on the issue?
regards,
Prosenjit.

Solved

Email notification to Manager on routine change request

I am trying to set up a multi review activity template for routine change request. The first Review Activity should notify the creator of the Change Requests Manager so the Manager can review. In the Review Activity, there is a check box for "Line Manager
Should Review". If I just check this box, will the Manager listed in AD for that user get an email or do I need to create an email subscription?
If I need the to create an email subscription, the question would now be what do I select for "Related Recipients" keeping in mind this is a Review Activity? Since we don't know who the Manager will be as it depends on the user creating the CR,
I certainly can't hard code a recipient so I need to user Related Recipients. When I get to this part, I have a laundry list of selections that basically do not make sense to me. Any help here would be appreciated.

There's really three separate problems here, so i'll address them indivigually:
First, you want to automatically add a line manager to a change request. This is the intention of the Line Manager checkbox. when the activity status workflow runs, and that box is checked, it looks at the parent work item, then looks at the created by users
of that parent work item, and adds that user to the list of reviewers for the activity. The implied permissions (http://blogs.technet.com/b/servicemanager/archive/2014/03/19/improving-ad-connector-performance.aspx,
this seems to be the only documentation of it) will allow that user to approve.
Second, there are no notifications by default, but a common requirement is a notification for all reviewers when their input is required. i have used
This method to generate these notifications. fortunately, the method Travis details is compatible with the line manager checkbox.
Finally, Approvals by emails is a function of
the Exchange Connector. You can set up keywords to allow people to reply to notifications with directives like [Approved] or [Resolved], and the connector will apply those directives to related connectors. You have to modify the exchange connector to include
the id in brackets (i.e. "[RA1234]") so it gets related correctly, but using the notification method from above, this should be easy (and
here is a hint).

Document for Change request Management in Solution Manager

Hi,
We are setting up Solution Manager. I know service desk configuration. But I need a document on how to configure change request management in Solution Manager.
Also I need a steps or a document for monitoring of EP 6.0 from Solution Manager.
Thanks a ton for help in advance.

Hi,
Check out these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/b4406827-0a01-0010-3da2-f56b36d88510
BI and Portals 2006 [original link is broken]
very good collection of eclasses. for making use of solution manager.
Feel free to revert back.
--ragu

In Change Request Making a default subject

Similar Messages

Maybe you are looking for