In Charm what is the

Hello,
In a CHaRM SDCR Change request, in the fast entry screen. There is a "desision Date" and a "Implemenation Date" under the time of entry. What are these used for?
I see in a U.rgent Correction SDHF There is only an "Implemenation Date". Also for Normal correction SDMJ There is only an "Implemenation Date.
Does it automatically get filled in somewhere?
I do not see it being used anywhere.
Can I use the Implemenation Date as a planned completion date?
Regards,
Avrohom

Hi Avrohom Weissman
Purpose of these dates are for documentation and tracking purposes with respect to a particular change made in the system.
You have to fill these informations for a transcation document (Change request and corrections) for a better tracking purposes.
You can modify these fields through configuration.
Regards
Naveen

Similar Messages

What are the pre requisites for implementing ChaRM

Hi
We are planning to implement ChaRM & CTS+ in our organization. We are using three system landscape and we have EP, PI, BI and ECC systems.
Can you please tell me what are the pre requisites for implementing ChaRM & CTS+ and what are the areas i need to look before starting the configuration
Thanks & Regards
Anand

The listed pre-requisites for the implementation of ChaRM are;
1. Already completed the basic configuraiton of SAP Solution Manager
2. You have set-up your solution, landscape and installed base (iBase) for the systems to be integrated
3. you have setup business partners for the users (or at least 1)
4. satellite systems are at the minimum support package level required (note 907768)
5. connections are available to the satelite systems
6. CTS+ if you wish to control non ABAP change requests through ChaRM

What's the best way to detect that text fits into ContainerControllers without scrolling?

Hi.
Question
What's the best way to detect that text typed by user (or added programmatically) exceeds available container space and find out where starts truncated part? Is there available some other (than described bellow) easy way to detect it or disallow set of controllers to receive more characters that can be displayed in given composition area?
My partialy failed attempt (simplified)
For example lets say that I've got an editable textflow with attached two instances of ContainerController.
var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
    firstController = new ContainerController(firstSprite, 100, 30),
    lastController = new ContainerController(secondSprite, 600, 30);
flow.interactionManager = new EditManager(new UndoManager());
flow.flowComposer.addController(firstController);
flow.flowComposer.addController(lastController);
flow.flowComposer.updateAllControllers();
With enabled vertical scroll policy I can compare height of the composition in last controller with height of the content:
var bounds:Rectangle = lastController.getContentBounds(),
    overflow:Boolean = lastController.compositionHeight < bounds.height;
trace('Content does not fit into given area?', overflow)
But when I switch vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF) - unfortunately this no longer works...(In my case scrolling should be dissabled, since text areas might have only one line with restricted width)
Use case
I want to create fillable form. Field might have a single or multiple lines. One field might start in the middle of the page, continue in the next line where it spreads through whole page and end in the - quarter of page width long - third line. Text typed by the user can't exceed given area since it might cover some static text that sits right after/below field.
Something like ascii image bellow:
|                <PAGE>                    |
|                                          |
|                                          |
|                                          |
|               [Field starts here........ |
| ........................................ |
| ........................................ |
| Ends here..]                             |
|                                          |
|                                          |
| [Another field] xxxx xxxx xxxxxxxx x xx |
| xxxxxxxxxxxxxxxxxxx                      |
|                                          |
|                              [One more.. |
| .....]                                   |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
Info:
[......] <-- form fields starts with '[' character, and ends with ']'
xxx       <-- sample, static text
| and _   <-- page borders

I've tried something like that previously, but it didn't work because then I've got vertical scroll policy to set to 'auto'. After changing verticalScrollPolicy to ScrollPolicy.OFF in the last container it worked like a charm.
Thanks zhen bian

What's the best way to remove inactive iChat users from jabberd2.db?

I'm about to run Autobuddy for users on my iChat server. However, there are several users that are no longer around and I don't want their records showing up in everyone's buddy list.
What's the safest/best way to remove them?
My plan is to use sqlite3 on the command line and use SQL to remove the entries from the "active" table, but I don't know what impact that may have on the rest of the database.
Any thoughts or suggestions?

Never mind...
Thought I had looked through enough threads. Found the following just after posting my question:
/usr/bin/jabber_autobuddy -d [email protected]
Works like a charm.

What is the best wireless internet connections for a Macbook

I have been trying to wirelessly connect a Macbook for internet connection. What is the best router that can be purchased for Macbook that will also work with a PC.

Yes, it shouldn't matter. I just picked up an Airport Express tonight - VERY easy to setup and works like a charm. One caution - Express is a wireless router ONLY. There are no additional wired ports on it for wired systems in your house. You'll take the cable that comes from your DSL modem out of your computer, and put into the port on the Express (if you already have a wired computer). If you need a wired/wireless router, you'll require the Extreme model.

What are the steps to define a phase listener in JSF 1.1?

Hello everyone...
Implementing a page listener in JSF 1.2 (the one that comes with JDeveloper 11g) is very straight forward, you implement the methods getPhaseID, beforePhase,afterPhase, and then add the class into the JSF configuration file. It works like charm.
However, doing the same thing with JDeveloper 10.1.3.4 (it comes with JSF 1.1) never works... so I was wondering... Am I missing something? What are the correct steps to do it?
thanks in advance.

Dear Mr. John...
thanks for your kind reply... however, I already was able to implement the Phase Listener successfully in JDeveloper 11g with JSF 1.2 specs. And it works just fine...
what am I asking is that I am doing exactly the same steps under JDeveloper 10.1.3.4 under JSF 1.1 specs, but it does not work at all... so what is the problem? any idea?
best regards

What cause the ZEN Touch 2 to freeze?

Hello,
I've (finally) received my ZEN Touch 2 with GPS two days ago, and it truly is a fantastic MP3 Player. But guess what? Today, for the first time, it really did froze, using the N64oid emulator. When the ZEN is lagging, I'm simply waiting, and it work like a charm a few seconds later. But now, it was completely frozen. Touch Screen, Power button... Tried connecting to computer, no reaction.
So in a bad mood, I tried reseting the unit, which I'm obviously not suposed to do often, I had a hard time. First, the reset hole is way too tiny!? Even with a paper clip or a pencil mine, this is ridiculously hard!? First, I even used the wrong hole, I though this was the reset hole, so yeah, the paper clip got inside the ZEN... Truly awesome. After all, I managed to remove it.
And then, seemed like I got it, ZEN resetted, when I thought it was completely screwed, only two days after I received it!
It seems to work correctly, now. Needless to saw I deleted the data, application and ROMs of N64oid, the right way (Along with PSXoid, which I haven't tested, but is probably similar.). When I first tried Super Mario 64, it was playable, at an OK speed. But today, I tried others ROMs, like Donkey Kong 64, or Tony Hawks Pro Skater, without a doubt, that was asking too much from the ZEN, since I couldn't pass the main menu.
So now I really hope my ZEN will last,?Creative. I'm in Quebec, got it from California. Needed to ship it to Plattsburgh by Amazon.com, and to be fowarded to my house, since you unfortunately do not ship to Canada.
I still have a one year warrantee, but undestand me, I?absolutely wouldn't want to ship it to Creative?in?the US, then get it shipped back to Plattsburgh, and then to my home. That'll cost me hell (Again)!
Alright,?I'll?now like to know what cause the ZEN Touch 2 to freeze? In my case, that was the emulator that was too advanced for the ZEN (And since it doesn't support multi-touch, it's hardly playable without a USB keyboard or gamepad (Possible?), or Wiimote). ?I don't have applications running?in the backgroung, only one at a time.
How can I avoid my ZEN to freeze again?
Oh yes, one more question. Why when I start some applications, it instantly shut ("The application [...] (process com [...] has stopped unexpectedly. Please try again.") ? How can I fix this?
Thanks for the reply.

)?Thanks for the reply.
I unistalled many 3rd Party APPs (Only /3 were booting, anyways), and I can already see a huge difference with the fluidity of the menu. It's also turning on faster.
I already uninstalled N64oid, but kept the others 2D emulators, never had a problem with them, they run without lagging.
What's odd, however, I downloaded Firefox from ZiiO Space, ran it, and the ZEN went pretty much crazy; black screen, I tried to get back to the menu, pressing buttons and all that, and then the ZEN vibrated like hell, perhaps because I pressed the buttons a lot of time. I finally made it, without resetting, but that was freaking scary. Oo
Uninstalled Firefox. I find it strange that I downloaded it from ZiiO Space, and that it doesn't work like normal.
I'll try to be more careful while downloading APPs, if I can.
I appreciate the reply.
GameX

What is the best value iMac config for hd video editing. I was going to go for i5 3.1 ghz with 4mb ram, but should I go further? Thanks!

What is the best value iMac config for hd video editing.? I was going to go for i5 3.1 ghz with 4mb ram, but should I go further? Thanks!

You have it currently installed? Can you go to the System Profiler and click on Applications (will take a while to populate) - take a look at your FCP and check what it says on the right - Universal, Intel, or PPC? It'll look like this:
If it's Universal or Intel, it'll run in Lion. However, the installer may or may not be PPC - that you may not know until you try to install. If you have it currently installed, then you could do what I did - move over all the files manually. I have a list of files for FCE and would assume they'd be the same with FCP: copy them from the old Mac and insert them in the very same spots on the new one.
Here is the list for FCE:
http://support.apple.com/kb/TA38198?viewlocale=en_US
(It was published for an uninstall, but worked like a charm).

[ChaRM] What happens to CTS status switch if SolMan fails?

Dear Gurus
We use ChaRM functionality for ERP system. We set "Request can not be created" and "Request can not be released" by CTS stutus switch. (T-cd: /TMWFLOW/PROJ )
I wonder what happens if SolMan server goes wrong and becomes unavailable. Does anybody know?
Which one is true?
1. CTS status switch is automatically turned off and request can be freely created and released in satellite ERP Dev system.
2. CTS status switch remains even though SolMan server is down. Administrator need to turn off status switch in sattellite ERP Dev system? (What is the T-cd for this?)
Thank you!!!

Within dev system, if you use SPRO_ADMIN, you should see a list of IMG-procets.
Double click on the one you care about.
Within tab Transp. Requests, the current client's CTS settings are listed (button CTS project status switch).
Regards,
Jan

What are the mandatory fields while creation of material master in differen

what are the mandatory fields while creation of material master in different views?

Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram

When would I use an if, for or while statement in Small Basic and what is the difference between the three?

I have a Y9 Computer Science Exam next week and I know that this will probably be one of the questions on it so I need to know the answer. What is the difference?

An If statement executes once IF the statement is true:
If 1 = 2/2 Then
Textwindow.writeline("True")
EndIf
A While statement executes WHILE the statement is true:
While 4 = 2+2
'Will keep looping while it is true
EndWhile
A For statement loops a number in increment:
For i = 1 to 10
'Every time through, i gets bigger by one until it equals 10
EndFor
It is written: "'As surely as I live,' says the Lord, 'every knee will bow before me; every tongue will acknowledge God.'" Romans 14:11

What is the diffrence betweensy-tabix and sy-index

hi
can any one suggest me
what is the diffrence betweensy-tabix and sy-index
Thanks & Regards
kalyan.

Hi Kalyan,
This question has been answered many times on SCN. Please make a search before posting a thread.
Read the Rules of Engagement.
Happy Posting.
Regards,
Chandra Sekhar

I just updated to 10.9.3. I now cannot open Mail - it comes up with an error window and suggests it may be incompatible with this OS. What is the fix for this? Thanks

When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
What is the answer to fix this?!

Backup for safety on at least two reliable drives.
Reinstall using the combo update at http://support.apple.com/kb/DL1746
You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading.

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

"Method Three
Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

What is the best way to set up iTunes on our home network so all family members have access to all of our itunes library, even music we don't have on the cloud?

I have five different people using 10 different apple devices on one itunes account in our family. We have had trouble sharing. What is the best way to set up itunes on our home network? We have purchased music that sits on icloud, but we also have music we have imported from our previous cd library. Our itunes program keeps crashing and dumping everyone's playlists. So far we have all been using just the one desktop computer to sync to because we can't figure out how to share the same librarly and playlists on multiple computers in our home so devices can be synced at any location as well as playlists and purchases be made.

What is the best way to set up itunes on our home network?
One iTunes library per person. One iTunes account per person.
If people wish to share songs, they can make copies.
When the inevitable day comes when the kids get older, you will not have to come back here and post asking how all that stuff can get separated!

In Charm what is the

Similar Messages

Maybe you are looking for