In CK86, child items are not coming
Dear Experts,
There is one FG - A, in the bom of A, there are 3 purchase item X,Y,Z, and one sub assembly S, procurement type of S is x (both) and its bom items are P and Q.
But in CK86 when we excute costing P and Q are not visible. System showing costing of S.
The same A FG is extended to other plant with same bom. But in that plant in CK86 P and Q are visible with their quantity and value.
What mistake I have done in my plant. I am not able to understand. Please help me.
Full points for helping answers.
Thanks and Regards
GR
Moderator: Thread locked due to crossposting into ERP Financials - Controlling
HI
use CK86_99
-ashok
Similar Messages
-
Few line items are not coming at the time of creation of delivery
Dear Experts,
When the user creating the delivery few line items are not picking in the delivery document
the following checks i verified,
Stock is available
shpping condition is differ from sold to party and sales document
Plants are same for all the line items
why the few line items are not coming in the delivery document creation,
please help me to sort out this issue
Thanks and Best Regards,
Muralidharan SHi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
BOM items are not coming in Subcontracting PO
Hi,
I have created a Finish good material and also have made BOM for that Finish material when I am trying to make a Subcontracting PO for that Finish material the BOM items are not coming in PO for that Finish material only for other material BOM items are coming properly.
regards,
zafar
Edited by: zafar_karnalkar on May 29, 2010 1:48 PMHi,
Pl. recheck the BOM.
Bom usage 1.
Item Type : L
SAM -
Line items are not coming on next page in Bill of Lading
When I am printing Bill of Lading, if it has around 8 line items then its printing on the first page, but if line items are more then its not printing the remaining line items on second page.
I have one delivery with 10 line items, when I am printing it then on first page 7 line items are coming and for 8 line item only material is printing and on second page its description is printing but last two line items are not printing at all.
Kindly help me to resolve the issue as it is very critical.Hi,
Check below points.
Point 1:
When you create a delivery document, you create it for a Shipping Point.
So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
Others got a different shipping point and that's why it didn't come to the same delivery document.
Shipping point determined based on below criteria
- Shipping Condition - From customer master
- Loading Group - Material
- Plant - Delivery Plant of the sales order line item
You assign a proffered shipping point for above combination in configuration.
If that combination is not find, those line items are not going in to the delivery.
You can check the log of the delivery document for more information as well.
Point 2:
Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
Al Requested delivery dates has to be on or before the "Selection Date" you entered in the VL01N screen.
Those line items which has a date more than that will dropped in the delivery.
Best regards,
Anupa -
ESS child iviews are not coming in PCD.
Dear All.
We are working on ESS Implementation and we installed Netviewer 7.01 sp6.
Our ECC version is 5.0.
We deployed SAP_ESS 100 SP21
SAP_MSS 100 SP21
SAPPCUI_GP 100 SP21
BP_ERP4ESS 60.2 SP0
BP_ERP4MSS 60.1 SP1
I configured SSO and JCO correctly, but In PCD only overview ivew is coming for
all application( for ex travel only overview iview is coming child ivew is missing ).
For MSS all iviews are coming.
Kindly suggest me what to do.(I stuck on this point).
Regards,
Abhishekh Singh
Enteg Infotech Pvt Ltd.Thanks.
we are using ERP 2004(ECC 5),
Kindly help me why ivews (only overview is coming for all application) for ESS is not coming in PCD.
Overview is working but I have requirement to give customer
only iview for my trips and expenses.
I created iview using SC but the link inside (create expense ) is not working
What I planned if I will get standard Iview for My trips and expenses then I will copy this to my own
ESS role and I will do personalization according to my customer.
But I am not getting the standard ivew itself.
Kindly help me to resolve this.
Regards,
Abhishekh Singh
Enteg Infotech Pvt Ltd. -
Manually schedulled cycle count items are not coming in cycle count listing
We had scheduled some items for manual cycle counting for particular date. But those are not getting generated in cycle count listing report or not avialble for counting.
Checkpoints done: 1. Items are cycle count enabled
2. Those items are avialable in that Cycle count Name
3. Onhand is avialbe for those items in particular subinventory
4. Cycle count scope is specific to Subinventory and that sub inv is included in the list
Can anyone give some thoughts why those manually schedulelled items are still not getting in cycle count listing report?
Thanks in Advance
AvinashHi Avinash,
Can you please let us know, are you using the CC with ABC analysis?
Thanks
NS -
GP Work Items are not coming in UWL after refresh the cache.
Hi All,
We are facing strange problem. We have cleared the UWL Cache for the GP connector and after that workitems releated to GP are not showing up into the UWL.
Any Idea.??
Thanks
DheerendraHi Dheerendra,
Are you using Federation by any chance? I mean, your GP runs on one server and you are using the UWL on the other server via federation? If yes then please check if the federation has been configured correctly and is working fine.
The other thing you can check is that the GPConnector is deactivated by mistake. If yes, then activate it.
Another check can be done in the System Configuration of the System Alias you are using for the GPConnector. Check whther it is pointing the correct sustem configuration. check whether the connection tests to that system are successful.
Also check whether the GPWorkItemProvider Web Service is working.
Regards,
Ajay -
Sales order are not coming in FS10N ?
Issue: How is it possible to see number of sales order in the detail of item in the transaction FS10N?
When i see the Transaction FS10N for 2011 , at item level Sale Documents are Present , but when i Use the Same FS10N for 2012 , Sale Document values are not present ?
Kindly tell me the possiblities why the Sale Document Values are not Coming ? Its Urgent .
Best Regards
Amit AroraDid you install any major upgrades or other system changes recently? I am not saying that that could cause this, but I really cannot think of anything that would suddenly stop populating Sales Document and Sales Document Item when you enter a new fiscal year. Also, are you sure you are looking at the line items that originated in the SD module?
-
Child actions are not allowed to perform redirect actions. partial view
I'm using ASP .NET MVC 5
I'm trying to use Create view with the index view to show the created item in the same page. For that I'm using _CreateCategory as the partial view and I added following to the index view
{Html.RenderAction("Create", Model);}
My controller's get and post methods as follows for the Create
[HttpGet]
public ActionResult Create()
return PartialView("_CreateCategory",new Inventory.Models.Category());
[HttpPost]
[ValidateAntiForgeryToken]
public ActionResult Create([Bind(Include="Id,Description")] Category category)
if (ModelState.IsValid)
db.Categories.Add(category);
db.SaveChanges();
return RedirectToAction( "Index");
return PartialView(category);
}My index method as follows
public ActionResult Index()
return View(db.Categories.ToList());
I didn't do any changes to the partial view. I'm getting error "
child actions are not allowed to perform redirect action
. I tried many ways to overcome this. But no luck yet.Please post ASP.NET questions in the ASP.NET forums:
http://forums.asp.net
The MVC forum is here: http://forums.asp.net/1146.aspx/1?MVC -
Business Process Graphics are not coming in SOLMAN 3.2
Hi,
In my solman system graphics for business processes are not coming.I am getting an error message "The page cannot be found".
The link is as follows...
http://itssvr.tsm.com:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?sap-language=E&sap-client=100
&_appl=SOLAR&_cmd=READ&_cacheid=032E57B2E
6FDB14188B4313543C5393E
I have checked sap-bc-solman-defaultuser-graphicdata is activated.
Please suggest.
Thanks & Regards
MrutyunjayhI,
Go to vtlf copy controls in item data vbrk/vbrp give 001 try this it my work out.
Best regards,
venkataswamy.y -
Reg: Certain Open Items are not showing in open item clearing F-44
HI all,
I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing. i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
with regards
JK RaoHi,
Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator you might not be giving here.
reward pts if useful
regds -
Asset Line items are not updating in table ANEP
Hi friends,
I found that asset line items are not getting updated in ANEP table,.
This is my precedure for posting of depreciation.
I'll create Asset through AS01, then i'll use the T.Code: F-90.. then i'll run the depreciation program thru t.Code: AFAB.
In but i am unable to capture the values of Planned and Depreciated or Posted values in ANEP.. Is there is any other table for this...
Where is the mistake in my process..
thanks in advance..
NaveenHI Naveen
The FI-AA documents are stored in tables ANEK (document header), ANEP (document line items) and ANEA (proportional values). You can use FI-AA standard report RABEWG_ALV01 to list all transactions to an asset in one fiscal year, and report RAABGA_ALV01 to list only retirement postings.
ANEA should be the solution you are looking for.
Hope it helps!
Cheers
Z -
Line items are not appearing for some users
Hi
In one module pool program some line items are not appering for specific users. For Ex: Out of 5 line items user1 is able to see only 3 and user2 able to see all the line items. what might be the reason.
Regards
John.Hi,
What do you mean by line items? Are you talking about screen fields in your module pool program or output of the program?
Please clarify your issue.
Regards,
RS -
Prices are not coming in invoice
Dear Friends,
When i prepare a sales order than prices are coming, but during invoice preparation prices are not coming for particulary 2 materials only.Please help.
Regard.s,
AbhijeetDear Friends,
Thanks for your reply. In copy control from delievery to billing,settings are as follows,
Pricing type:- G
Coping requirement:-004
Data VBRK/VBRP:-007
Users enter prices manually when they prepare sales order.Condition category is empty in condition type.
Looking forward for your reply.
Regard,s
Abhijeet -
Delta changes in R/3 sales document are not coming into CRM
Hi Middleware experts,
We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
Now, if I changes the document in CRM and these changes are coming into R/3.
Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
I do not have any clue on what is happening? Highly appreciated, if you can help me.
Thanks,
PKHi PK,
In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.
Message was edited by: Vikash Krishna
Maybe you are looking for
-
How to store the XML data? file or database?
i'm frustrate at it. If store XML data into files, then when i query any data,how can i search data using relationship as SQL? But if store XML data into database.How can i transform the xml data to the data table? Can any one give me an clear exampl
-
Hi We have a customer requirement where customer wants to post the the recon account through condition type while billing. These recon accounts are made assigned in VKOA. While billing it is giving error that recon account can't be directly posted to
-
Since a few days back the usage of the magnifying tool has changed, don't know what I've done and can't fix it. Previously the magnifying glass enlarged and reduced the image while I moved the mouse ponter, its was flowing with my movement. But now i
-
Hi folks,I need to backup some apps on a 7.1 server. Some of them are BSO and we both export values and copy files after we have stopped the essbase service (ind, pag, ind, tct, esm,...)However, it appears we can't export ASO models without using a r
-
Hi, When I opened the MSN, it always say "A newer version of MSN Messenger for Macintosh is available. You must download the newer version in order to continue using MSN Messenger." I have downloaded it for few times, but the computer still said the