In cloud when i create VM on which host VM will create?

I have Host group in that i moved two host's but when i created VM it created in 1 host but can i select which VM should create in which HOST?
Santosh Dharamsale

I am not sure that I follow you on this one.
When you deploy a VM to a cloud, it can be placed to any of the hosts available in the host groups you have added to this cloud.
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Similar Messages

My firefox won't create a new tab when I click on the tab. It will create a new window. It worked fine till this morning. I've rebooted several time to see if that would make a difference. It doesn't.

I can only create tabs by clicking on a link in an email or a program or a link in the window I am viewing. It will NOT create a new tab when I click on the tab to create a new tab, nor will it create a new tab when I right click on the tab & click on create a new tab. I'm used to using tabbed browsing all the time & it's driving me nuts. HELP!
I have not downloaded any new updates on any software or downloaded any new software in the hours before this started happening.
Just to clarify about my original question. I meant to say that firefox will create a new window when I right click & click on create a new window but will not create a new tab when I click on create a new tab. I think what I wrote may have been somewhat confusing.

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

How to create one procedure which can drop and create materialized view

Hi,
I want to create one pl/sql procedure which can first drop materialized view CATEGORY_PK and after that create same materialized view CATEGORY_PK.
programme is as follows:
DROP MATERIALIZED VIEW CATEGORY_PK;
CREATE MATERIALIZED VIEW CATEGORY_PK REFRESH FORCE WITH PRIMARY KEY AS
SELECT cav1.ownerid AS categoryid, p.uuid AS productid ,p.domainID AS productdomainid,pav.stringvalue AS NAME
     ,pav2.stringvalue AS ID, pav3.stringvalue AS SHORT
FROM product p, product_av pav, catalogcategory_av cav1, catalogcategory_av cav2,product_av pav2,product_av pav3
WHERE
cav1.NAME = 'PRODUCT_BINDING_ATTRIBUTE' AND
cav2.NAME = 'PRODUCT_BINDING_VALUE' AND
cav1.ownerid = cav2.ownerid AND
p.uuid = pav.ownerid AND
          p.uuid = pav2.ownerid AND
          p.uuid = pav3.ownerid AND
pav.NAME = cav1.stringvalue AND
          pav2.NAME = cav1.stringvalue AND
          pav2.NAME = cav1.stringvalue AND
pav.stringvalue = cav2.stringvalue AND
          pav2.stringvalue = cav2.stringvalue AND
          pav3.stringvalue = cav2.stringvalue
UNION
SELECT catalogcategoryid AS categoryid, productid, repdomainid AS productdomainid,pav1.stringvalue AS NAME
     ,pav2.stringvalue AS ID, pav3.stringvalue AS SHORT
FROM productcategoryassignment ,product_av pav1,product_av pav2,product_av pav3
     WHERE pav1.ownerid=productid
     AND pav2.ownerid=productid
     AND pav3.ownerid=productid
     AND pav1.NAME='name'
     AND pav2.NAME='productID'
     AND pav3.NAME='shortDescription';

user498566 wrote:
I want to create one pl/sql procedure which can first drop materialized view CATEGORY_PK and after that create same materialized view CATEGORY_PK.That sounds like a waste of time and resources. What do you hope to achieve by this? A refresh? If so, a simple refresh of the old materialized view will do.
If you truly want to continue this road, you'll have to use the EXECUTE IMMEDIATE command to execute DDL commands from within PL/SQL.
Regards,
Rob.

At which column i will create index ????

my query is as follows and please tell me at which column of the table i would create an index
select code, detail, nvl(sum(dr)-sum(cr),0) from spda
where sdate < '01-feb-09'
order by codebecause the query result very slow as there is above 3 million record in a table
Regards
M. Laeeque A.
Edited by: MLA on Feb 27, 2009 12:02 PM

MLA wrote:
my query is as follows and please tell me at which column of the table i would create an index
select code, detail, nvl(sum(dr)-sum(cr),0) from spda
where and sdate < '01-feb-09'because the query result very slow as there is above 3 million record in a tableYou've posted this request three times (with three different versions of above statement).
Which one would you like to get replied to?
If this is the nested subquery that is part of the query posted here: Query Response Very Slow
you should consider that the nested subquery is correlated to the outer query by this additional predicate:
WHERE SUBSTR(spda.mcode,1,2) || '-' || SUBSTR(spda.mcode,3,4) =
SUBSTR(ac.code,1,2) || '-' || SUBSTR(ac.code,3,4)So in order to optimize the nested subquery access path this should be taken into account.
As I've already pointed out in the other thread, getting rid of the nested subquery and instead using regular joins probably offers the best performance.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Packagemaker will create my user name in target devices

Hi,
i'm trying to create a package.
But when i install it on another machine, it will create my username and install the files in that path.
But Packagemaker is supposed to install files on client account.
What am i missing?
Thanks
John

a staging area?...
What's that?
Yes i suppose i'm missing the whole point..
I thought it was easier to do.
As you said i will try to install into the root Library.

I have the latest Creative Cloud versions of Lightroom and Lightroom Mobile on my Ipad. On my desktop I have created a collection which I have put in a custom order. On my Ipad I go into that collection and set the order to custom order, which I presume m

I have the latest Creative Cloud versions of Lightroom and Lightroom Mobile on my Ipad. On my desktop I have created a collection which I have put in a custom order. On my Ipad I go into that collection and set the order to custom order, which I presume means the order I have on my desktop. However, the photos on the Ipad seem to be just random photos from the collection THEN the rest of the collection is in the correct order after that.

Do you have virtual copies in your collection?
Could you please send send me a LR Desktop +Mobile diagnostig log - best as a private message with a downloadable dropbox link
You can trigger the Lr Desktop diagnostig log via LR Desktop preferences -> Lightroom Mobile and when you hold down the alt key you will notice a generate diagnostic log button.
The Lr Mobile app log can be triggered when you open up the settings and long press the to LR Icon a diagnostic log will be generated and attached to your local mail client. While opening the settings could you double check if you are signed-in?
Thanks
Guido

My creative cloud subscription is over, and I'm trying to open up Adobe Photoshop CS6 which I got from my Adobe Creative Suite 6 Design & Web Premium - Education Edition, but it keeps trying to validate my creative cloud when I know it's expired. What do

My creative cloud subscription is over, and I'm trying to open up Adobe Photoshop CS6 which I got from my Adobe Creative Suite 6 Design & Web Premium - Education Edition, but it keeps trying to validate my creative cloud when I know it's expired.
What do I do? Help ):

How do I prevent Creative Cloud from taking over my CS6 perpetual license?
https://forums.adobe.com/thread/1584746

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

I created a brochure in pages and exported it to a pdf format. The pdf looks and opens perfectly using preview but when opened in adobe reader (which my printer uses), fonts look odd, transparencies don't display...etc. Tells me error exists on page?

Does this essentially mean there is no way to fix this problem on my end? It's a pity because the design and branding of my brochure will suffer if I remove transparencies and use different fonts. It also concerns me moving forward because it means the quality of print on my pieces will be significantly lower because most commercial printers use Adobe products.

I recently bought this 27 " iMac used and he restored and whipped everything off of it. So i went to buy some stuff from apple store and it asked me to created apple id which i did. when i went to get the ilife items

I recently bought this 27 " iMac used and he restored and whipped everything off of it. So i went to buy some stuff from apple store and it asked me to created apple id which i did. when i went to get the ilife items such as garage band iphot iMovie the button said accept. when i clicked it. it said the following ..
These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the applications.
Please let me know what to do to fix this issue and be able to purchase ilife 11 for this computer

Hi Lance ...
You can only re download the iLife apps using the same Apple ID they were purchased with.
See: Restoring iLife applications after Internet Restore of OS X Lion
here > Lion Recovery

I am not able to get name of the person when he is calling for which i have already saved the no. on my contact list i have reseted my phone twice help me out

hello i have started using iphone 5 for which i downloaded my contacts from i clouds i am not able to get name of the person when he is calling for which i have already saved the no. on my contact list i have reseted my phone twice its only showing the names of the person whose no. i have saved it with the country code i am staying in india new delhi pls help me i am fed up not able to get the name of person who is calling

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks.

I have Adobe Creative Cloud. How do I edit a PDF form I created at work and e-mailed to my home tablet?

I have Adobe Creative Cloud. How do I edit a PDF form I created at work and e-mailed to my home tablet?

Hi Val,
I see! Please see this thread: Is FormsCentral part of the Creative Cloud?
Creative Cloud doesn't include FormsCentral, which is why you're being prompted to upgrade. (An Acrobat Pro subscription, on the other hand, does include FormsCentral.)
Best,
Sara

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

I keep getting an error message when downloading a new app which states " Zinio and 5 other apps cannot be purchased at this time" and then it let's me purchase the app that I was looking at? Can anyone explain that?

apple_master New Delhi, India
This solved my questionRe: Unable to Purchase
Apr 16, 2012 10:22 PM (in response to eight4seven)
This worked for someone
I had this problem for about six weeks. I was following this forum but was too unsure of what might happen to try the fixes that were suggested.
About two weeks ago I decided to delete the downloads.28.sqlitedb file (usingDiskAid(a free program), on a PC running Windows 7). The original downloads.28.sqlitedb was 936 KB. The new one that the system created is 80 Kb., and has stayed at about that size. After about four days I also deleted all the other contents of the Download folder. Ten days later and still no more problems. Downloads are much quicker, nothing greys-out (as was happening frequently before).
Everything has worked well since with no more error messages.
I am using an iPod 4G, iOS 5.1 (originally iOS 5.0). I do not have a manifest file, and as far as I know, have not had one. DiskAid can search the whole "hard drive" on the iPod.
Deleting downloads.28.sqlitedb and the contents of Downloads worked for me.

Create PDF file which will write to mdb

HI there.
I have a requirement to add some code to a set of PDF files which will be read by members of my team as part of their induction. Each pdf has a form at the end which captures their name and a tickbox to state that they have read the document. When a submit button as part of the form is clicked I would like to write these basic details to an access mdb database so that we can keep a check of who is compliant with the induction process.
Is it possible to use Livecycle designer to create a document which will do this when opened in Adobe Reader? I don't need the code to do this - just need to know if it is possible. If not are there any other ways I could save the information on the form silently without the user needing to do anything other than submit the information?
I've read somewhere that for certain things to work you need to activate some kind of reader extensions - is that the case for this solution?
Thanks in advance for your advice.
Matt

Hi Matt,
Yes, if the user has the free Adobe Reader, then database access will require the form to be Reader Enabled in LC/ADEP Reader Extensions.
While you can Reader Enable a form in Acrobat (with restrictions), connecting to a database is not permitted.
See here for a summary: http://assure.ly/etkFNU.
Hope that helps,
Niall

Creating an art which is not visible on 'Layer' panel.

Hi all,
Is it possible to create an art which is present on the document but not on the 'Layer' panel(F7)?
My requirement is to create an art which is visible on the document, but could not be seen on the Layer panel and user is not able to select it.
Just like it happens in case of reflection, when we are creating a copy of selected art object, the reflected copy doesn't present on the 'Layer' panel but it is visible on the document and user is not able to select the reflected one, while he can only select the original art.
Any help would be appreciated.
Thanks..

If you want something that is rendered, but not in the layers panel, the only way to do that (that I know of) would be through a Live Effect. Live Effect lets you create art that is drawn, but not part of the art tree. The caveat is that it has to be tied to a piece of artwork that *is* on the artboard. I think you could apply it to the layer group for a layer, but every time anything on the layer changed it would trigger your live effect execution, so make sure its not hard to render!

In cloud when i create VM on which host VM will create?

Similar Messages

Maybe you are looking for