In CloverETL the Text Enrichment component not recognizing Indian Person Names

Im using OEID Integrator ETL3.1.1.
The component Text Enrichment is not recognizing Indian Person Names. Is there any lib files which needed to be added in Lexalytics?
Please suggest.

Holy S H ! T, I thought this was only me!
SEVEN Months, and Apple has NOT addressed your issue.
I was gonna say "I miss Steve", then I remembered he didn't answer user concerns either...

Similar Messages

Error scheduling Graph containing text Enrichment component

I have been trying to schedule Graph containing text Enrichment component without any joy (Integrator 2.2.2). The graph executes but returns an error when trying to run TE component.
Has anyone managed to get this configuration scheduled?

What error are you getting (in the graph log or app server log)? Does the graph throw the same error if you execute it directly from the Sandboxes section (not scheduled)? Also to note, there is not a supported TE product component in version 2.2.2. The first release of a supported TE product component is in 2.3.0 and it appears to run fine as scheduled in the LDI Server.

Having two or more Text-Enrichment component in an Inetgrator graph

Hi All,
The data I am trying to load into Endeca Server v3.0 has got three text columns and I would like to do the text-enrichment process on all of them. At the moment I have used one text-enrichment component per each column (overall three text-enrichment components) but as a result some output columns such as Document-Sentiment or Summary are only containing the last column's sentiment/summary where my ideal is to have a summary of all three columns or an average on their sentiment. I wonder if there is any configuration available for these kind of requirements or if it is possible to use different properties files in order to plan three different set of output columns?
Appreciate your help, Regards.

Hi Farnaz,
If you enriched in parallel, with each branch enriching a different field on the record, you'd wind up with 3 'EntitiesPerson' fields, one on each branch (assuming you're using the same te.properties file). When you combine the record back together, you will have to do something in your join logic with CTL to combine them.
Something like:
$out.0.EntitesPerson = $in.0.EntitiesPerson + ${"MULTIASSIGN_DELIMITER"} + $in.1.EntitiesPerson + ${"MULTIASSIGN_DELIMITER"} + $in.2.EntitiesPerson;

Go - Connect to Server does NOT work - The text entered does not appear to

Two Macs with Mac OS X 10.5.2. Both migrated from Mac OS X 10.4.11. One Mactel and one PowerPC. I can see the former from the latter, but not the latter from the former:
Go/Connect to Server
gives this error all the time for all listed servers:
The text entered does not appear to be a recognized URL format
This does not help:
Mac OS X 10.5: "The text entered does not appear to be a recognized URL format" alert when connecting to server
http://docs.info.apple.com/article.html?artnum=307256
Any idea how to fix it? Thanks.

At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
I'd do it on all of them.
Then we can go on from there if you still have a problem, but with several queastions eliminated!

My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized.

My 120GB IPod classic is not recognized by my Windows 7 PC. When I plug the ipod into my computer I receive a message saying that the USD device is not recognized. The Device Manager lists it as an Unknown Device. I've tried uninstalling iTunes and reinstalling it, but it had no affect. The odd thing is that our other iPod (160 GB Classic) is recognized on the same computer using the same USB cable. When I plug the ipod in question into another PC, the PC seems to recognize the iPod and lists it in Windows Explorer (iTunes is not installed on this machine). There seems to be something out of wack with this PC/iPod combo. Any thoughts on what I can do to try to resolve this issue? I tried all of the steps listed here, but they didn't help me. http://support.apple.com/kb/TS1538
Any help would be greatly appreciated.

Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

You can prevent it from being printed by applying a security policy to it
in Acrobat. The rest can't be prevented, unless you spend a LOT of money
on DRM protection.

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.

I just bought a mac mini over the weekend. I saved items from my old G4 to an external hard drive. I go to plug in the external hard drive and the new computer is not recognizing it. Help.
Here is the information I have. The external hard drive is a 120GB Acomdata. It has both USB and Firewire. When I go to plug in to the mac mini through USB, it is not being recognized. When I switch to Firewire on the old computer I can see it, however when I go to USB it is not being recognized (even on the old computer).
I'm at a loss as to what to do. Any advice would be helpful.

Shalese wrote:
Have you ever tried the FW 400 to 800 adapter?
I have used them on multiple occasions and they work just fine.
Try this (maybe you already have):
-Boot Mini with drive disconnected.
-Do not connect drive but turn it on
-wait a few seconds for drive to spin up
-plug cable into the Mini then into drive.
This is an old drive and may have some timing
issues.
I had an Acomdata drive a long time ago. It
worked fine with FW but USB was flakey.

The text "Remove" is not appearing in the remove button of Bookmarks.

Hi,
The text "Remove" is not appearing in the remove button of Bookmarks. My problem is the same as mentioned in this question.
https://support.mozilla.org/en-US/questions/1017302
The solutions suggested on the link don't seem to work. How do I resolve this? For me this problem is persisting everyday.
Thanks

You already tested in Firefox's Safe Mode and that did not make any difference?
Can you associate this problem with any software changes, such as upgrading from Firefox 31 to Firefox 32, or updating an add-on, or Windows, etc.?
Have you noticed problems with any other dialogs or menus?
Occasionally a corrupted settings file may cause issues with dialogs. This file also stores toolbar customizations. You can rename the file and customize from scratch.
Open your current Firefox settings (AKA Firefox profile) folder using either
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Leaving that window open, switch back to Firefox and Exit, either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
Pause while Firefox finishes its cleanup, then rename '''localstore.rdf''' to something like localstore.old
Start Firefox back up again. Any improvement in the Edit Bookmarks dialog?

I have a new Nano and I get a message that says the USB device is not recognized by my computer and I cannot set it up.

I have a new IPod Nano and when trying to connect to my PC for the first time I get a fault message that says the "USB Device is not recognized by my computer. I have several other IPod devices and have never had this problem. When I go to windows explorer, the device does not show at all, so I cannot manually open it.

Hello JETaylor2015,
Congratulations on your new iPod nano! I would be concerned too if my iPod was not recognized by iTunes or my computer. I recommend reviewing this article for steps to take when your iPod is not recognized:
iPod not appearing in iTunes
http://support.apple.com/kb/TS3716
Thank you for using Apple Support Communities.
Best,
Sheila M.

I have a manual that contains headings and index entries that contain less than and greater than characters, and . The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the C

I have a manual that contains headings and index entries that contain less than and greater than characters, < and >. The Publish to Responsive HTML5 function escapes these correctly in the main body of the text but does not work correctly in either the Contents or the Index of the generated HTML. In the Contents the words are completely missing and in the index entries the '\' characters that are required in the markers remain in the entry but the leading less than symbol and the first character of the word is deleted; hence what should appear as <dataseries> appears as \ataseries\>. I believe this is a FMv12 bug. Has anyone else experienced this? Is the FM team aware and working on a fix. Any suggestions for a workaround?

The Index issue is more complicated since in order to get the < and > into the index requires the entry itself to be escaped. So, in order to index '<x2settings>' you have to key '\<x2settings\>'. Looking at the generated index entry in the .js file we see '<key name=\"\\2settings\\>\">. This is a bit of a mess and produces an index entry of '\2settings\>'. This ought to be '<key name=\"&lt;x2settings&gt;\" >'. I have tested this fix and it works - but the worst of it is that the first character of the index entry has been stripped out. Consequently I cannot fix this with a few global changes - and I have a lot of index entries of this type. I'm looking forward to a response to this since I cannot publish this document in its current state.

TS1538 Ipod is stuck in recovery mode, and not recognized by iTunes. Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius said it may be a hardware error, but all of the buttons and cords work. Now

iPod is stuck in recovery mode, and not recognized by iTunes.
Tried all of the recommended resets and combinations mentioned, but the ipod is still not recognized. Genius at apple said it may be a hardware error, "The button is broke" but all of the buttons and cords work and i proved it to him. He then said he doesnt know, ma Now what?

If it does not work on other computers then I agree with the Genius

The Disk inserted is not recognized

I'm having a problem with my DVD drive. I get the error message "the disk you inserted was not readable by this CPU" after inserting a burned DVD. I also tried a regular movie DVD and I received the same message. Both the burned DVD and obviously the regular movie DVD played fine on a DVD player. The drive also ejects the disk automatically after not recognizing it. This problem just started in about June. Any help would be appreciated. Whenever I have problems with my computer I laugh at the new mac commercials.

How common is it for the lens to get dusty and not read a particular DVD? I have two new DVD movies that are not even recognized on my PowerBook, and get spit out after a minute of cycling. Every other DVD works fine. I even returned one of the non-recognized DVDs and exchanged it for another of the same title, and guess what, it does not play either.
I tried these two problem DVDs in my G4 desktop last night, and they both worked just fine in that older drive. Unfortunately, and unrelated, my four year old Quicksilver desktop died overnight after the successful movie screenings.
Are some newish Region 1 NTSC DVDs different somehow (what is DVD9?)? Or is it most likely a dirty lens needing service, as you suggest?
Garth

I find that I am unable to receive updates. When I try to re-install, the serial number is not recognized. I have a retail, boxed, full-version of PS6.

I find that I am unable to receive updates. When I try to re-install, the serial number is not recognized. I have a retail, boxed, full-version of PS6

Call Apple or an Apple Store in your city and ask them. Or do a Google search.

When preview my ibook on IPAD the text on the edge of the text box is not visible. How do I fix that?

When I preview my ibod created in Ibook Author on my IPAD some of the text on the edge of the text box is not visible. How do I fix that?

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

In CloverETL the Text Enrichment component not recognizing Indian Person Names

Similar Messages

Maybe you are looking for