In CMS, there is no Transportable change list in ID

Hi All,
I am using CMS. I want to transport Configuration Objects. But when I am going to Change list tab page in ID, I am able to see only open and close Change list. There is no option called Transportable Change List.
I have followed HELP.SAP.COM which tells,
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
But still the status of the change list changes to closed and there is no tab called transportable change list.
However I am able to transport IR objects correctly and there I am able to see Transportable change list too.
Is there any specific configuration for this??
Warm Regards,
Gouri

Hi Gauri,
for ID, the XI track which you have created, you should specify SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0) swcv.............now you create a new config scenario in ID.............Now you should see transportable change list in ID....
Thanks,
Rajeev Gupta

Similar Messages

CTS - Don't Always Want Transportable Change Lists

Is there a way to turn off automatic creation of the Transportable Change Lists? At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created. I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder). Is there something like this for CTS?

This change did not resolve my issue (and we bounced the system to make sure it took effect).
If anyone knows of anything else, please chime in.
When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates. I would like that turned off and I will only make transports when I am ready.
Thanks

Transporting directly from ID transporting from transport change list

Hello,
am using CTS+ transport.
Here, what would be the difference after activating, all my objects of a CS go into tranportable change list and then i release for CTS transport, for all the objects of the CS.
And, what if I do not do the above step and after activating my change list, right click on my CS and hit "export" and use the mode of transport as "cts" and transport the entire CS?
My IR objects got successfully transported by the 2nd method.
MY ID objects are failing, am not too sure, if this is the reason. Groups and tragets in SLD are correctly maintained.
Thanks,
vishal

Hi Vishal,
What we do is: (From Dev to QA)
in Dev:
1) Right click on software component,select Export, mode CMS
2) Select objects to be transported.
3) Export
in QA:
1) go to change list of lsadmin.
2) Transfer list to your name
3) Make necessary changes(communication channel parameters,etc)
4) activate.
Same has to be done from QA to Prod
Are you doing the same?
Thanks
Regards,
shweta

Not option for Transport under the tab Change list in both IR and ID

Hello All,
The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Also we are running a seperate NWDI server for CMS and the SLD is with the XI production server.
Am I missing any configuration? Kindly suggest
Regards,
Anand

Hi Anand
Please check if the following link is of some good to you:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/f9f02cf3e41ecce10000000a1553f7/frameset.htm
Also check for steps mentioned here:
http://www.saptechies.com/minisap-610-installation/
I hope it helps
Regards
Chen

How to alphabetize reading list. Is there a way to change the order of the reading list?

how to alphabetize reading list. Is there a way to change the order of the reading list?

At present there is no way to alphabetize Reading List.
Best.

Is there a way to change the order of the list that appears when i right click on a link?

In previous versions of firefox, when i right clicked on a link the list that appeareded was in order:
first Open Link in New Window
second Open Link in New Tab
In firefox 4 this is reversed. Is there a way to change it back?

You can do that with the Menu Editor extension - https://addons.mozilla.org/firefox/addon/menu-editor/
This extension has not been updated by its author in a couple of years, but another developer has updated it for Firefox 4, you can get the updated version from http://netticat.ath.cx/MyAddons/MyAddons.htm#3rdpartyaddons

Is there any way to change the type of Transport like workbench to Customiz

Hi All,
Here we are having very silly question.
Is there any way to change the type of Transport like from
Workbench to Customize and from Customize to Workbench within the same client.
Assume that there the no object associated with the transport.
Your quick respose is highly appreciated...
Thanks in Advance!

No this cannot be done.
Both work bench and custimizing are separate entites when it comes to tranport layers config.
You cannot save a report change into customizing request this will be saved into work bench request only .
In the same way table entries or some customizing tasks can be captured only into custimizing tr.
Br,
Vijay.

No Transport option in Change list tab

Hello All,
The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Am I missing any configuration? Kindly suggest
Regards,
Anand

Hi,
In XI (in IR & ID) you will not find the transport option in tab change list. If you what to tansport any namespace or any particular object then put the mouse on that and right click then press Export and follow the instructins. Finally it will create a .tpz file. You have to take the help of BASIS team to tranport this file, once the file will be trasported into Quality or Production then you can Improt it from menu Tools --> Import desigen objects..
Regards,
Sarvesh

(1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??

(1) I want to alphabetize faces. (2) Can't change spelling in Faces. After I correct it, it jumps back to the incorrect spelling. There are names in the list that aren't assigned. Can they be deleted??
I type Sandi Patty. It changes it to Sandi patty. (Little "p") There are some pics in there correctly capitalized and some that aren't. So, I deleted all the faces with incorrect spelling hoping to clear the system of that name completely. Didn't work. As you type Sandi, all the choices, including the one with error in capitalization show up. I type it CORRECTY -- Sandi Patty -- I click on another face and the Sandi Patty becomes Sandy patty. (Little P) There are other names in the list that were the result of bad spelling. Can these NOT be deleted??

Not at this time, I spent an hour on the phone with Apple support today on this topic and they could not locate the files necessary to delete names from the list. Bummer

Version of the object using Transport Wizard and Change Lists

Hello experts,
When using the Transport Wizard, after selecting --> "Individual Objects" --> "Add Objects from Change Lists", do you know if the version of the object selected
- is the last one (aka, the version right after the last activation of the object)
- or the version of the object at the time it was added to the Change List?
Thank you very much!

Go to T-code SE10, go to the transport request you created. See all objects that are attached to your request. Now you would need to revert all the objects attached to its previous version(as you recieved before changes).
Go to each object, by double clicking on it, go to utilities - version management and see the relevant version just prior to your change. Uncheck the checkbox which is checked on current version and check the previous version checkbox and find button on toolbar which says retrieve version, click on it and once that version is retrieved go to change mode on that object and generate or activate the same.

TS3274 When viewing pick lists from different web sites my iPad2 selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

When viewing pick lists from different web sites my iPad 2 (safari) selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
This will load the original clip into the viewer at the matching point of the frame in the timeline.
K

Thunderbird puts a new message at the end of the thread. Is there any way of changing this preference to listing new message at top of the thread?

Thunderbird puts a new message at the end of the thread.
Is there any way of changing this preference so that new messages are displayed at the top of the thread.
This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.

No it is not possible. The newest message is attached to the message it is in reply to.
The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss

Import process not started in CHARM 7.1 when there is empty transport

Hi all,
We have this issue when using CHARM in Solman 7.1 to import transports for Urgent Change documents (ZMHF).
When we import 2 transports (1 released Workbench and 1 unreleased empty transport) to the ECC QA system, the system returned with error "Not all transports yet released". The Task List log displyed that releasing process was completed ok, but the import process was not started.
We had this issue after we applied Support Pack (EHP6) to our ECC QA system.
Prior to the upgrade, the releasing and import process are ok even there is empty transport. The system will just delete the empty transport when we use the action "Pass Urgent Change to Test".
Has anyone have any idea about this issue?
Thanks,
Tess

HI Tess,
What is the SP version of SAP Solution manager 7.1 system.
Normally subtask only needs to release in TR, once the click the "pass change to test"
https://websmp208.sap-ag.de/~sapidb/011000358700000478212011E/index.htm
Action :
CLEAR_EMPTY - This action will delete the empty TR in the change document.
RELEASE_REQU - it will release the TR
IMPORT_TEST - Start importing in the QAS
Please update the ChaRM master note in the system and try iy.
Also check the action log and post it.
Rg,Karthik

Unable see the transported changes.

Hi All,
There is change in my source IDOC structure for mapping.
In my dev system i have imported this changed idoc and made the mapping changes
I have transported these objects from DEV to Test server
The changed mapping got successfully transorted from DEV to Test server
For changed IDOC the changes were successfully imported from DEV to Test server. But there was problem for assembly. The problem was with Version conflicts for this IDOC.
What I did is, I deleted this IDOC definition from test server and retransported the IDOC from DEV to Test server
This time the IDOC got successfully imported and exported in test server. SWC got assembled successfully.
But the IDOC did not get created.
I can see the IDOC in transported list but cant see the IDOC structure created in test server under Imported objects.
Please suggest.
Regards,
Sheetal

Hi Sheetal.
You can see in change List in Test Server if there are objects stopped (not active) there. Or maybe you have to retransport all objects. If In the Test Server shows the conflits message, you must accept this updates (accept button new objects).
Regards.
Bruno

Can not close a change list in XI

Hi all,
I am not able to close or transfer a change list in XI due to a "Missing value for objVersion!" error. It is preventing me to transport any interface to this system due to the same error. Both things seems to be related and I need to delete or close the change list in order to be able to transport the interfaces.
Any idea?
Much appreciated
Diana

HI Iñaki,
This is a new interface and it is not in the target system so there is no conflict there. We tried to transport it but the change list is now empty and we can not do anything with it. There is no conflict tab...
Thanks
Diana

In CMS, there is no Transportable change list in ID

Similar Messages

Maybe you are looking for