In compressor 4: compressing an apple intermediate 1440x1080 50i file to mpeg2transport stream (PAL) gets me the error "HOST Quicktime Error: 0"

Any idea?

Hi,
i guess you ran into the same problems, i experienced myself. If you setup a cluster, then you might be interested into the solution described in this comment: https://discussions.apple.com/message/15484726#15484726
If you manage to get Compressors/Qmaster to create the folders
/Users/Shared/Library/Application Support/Apple Qmaster/ and
/Users/Shared/Library/Application Support/Apple Qmaster/Storage/
then your cluster should work standalone without having to send from FCPX. (Note: i created those folders an all machines, that are part of my render cluster, and everything works now as expected)
Regards.

Similar Messages

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

My iphone 3GS gives me this message: Your Apple ID has been disable. How can I get into the apps?

My iphone 3GS gives me this message: Your Apple ID has been disable. How can I get into the apps?

Apple ID FAQ
http://support.apple.com/kb/HE37
Apple ID Security Alert
http://support.apple.com/kb/TS2446

The Facetime can not process the registration of my Apple ID, I've tied several times, and it always says " The server encountered an error processing registration."

The Facetime can not process the registration of my Apple ID, I've tied several times, and it always says " The server encountered an error processing registration."

I had this problem and also was unable to directly access the App store and could not get iMessage to work. I disabled the firewall protection on my third party virus protection software, rebooted and was good to go. iMessage also works and I can directly access the App store, rather than enter via iTunes.

HT2534 I have just created an Apple Id for itunes, it is allowing me to get to the debit card stage but they no longer accept Visa Debit, there is no other option for me as i dont have any other cards and there isnt a 'none' option! HELP!!

I have just created an Apple Id for itunes, it is allowing me to get to the debit card stage but they no longer accept Visa Debit, there is no other option for me as i dont have any other cards and there isnt a 'none' option! HELP!!

How did you create the account ? Unless you followed the instructions on the page that you post from exactly then you won't get the 'none' option and you will need to enter payment details - those instructions won't work on existing accounts.
I tried those instructions a week ago in response to another thread and I got the 'none' option on it e.g. on my computer's iTunes I logged out of my existing account, found a free app in the store, clicked on its 'free' price, clicked on 'create Apple id' on the popup, and after agreeing to the terms and filling in my details I was able to select 'none' as my payment option and download a free app with it.

Compressor error - Failed: Quicktime error 0

I'm sending my FCP sequence directly to Compressor and I'm getting this message after I submit: "Failed: Quicktime error 0". It's a 34 minute sequence. I'm using DVD Best Quality - 90 Minutes as my setting. I've googled this error and I'm seeing some folks suggest that there may be a corrupt file in the FCP sequence. Others say that it may be an insufficient RAM issue (not my issue). My questions:
- Has anyone seen this before? If so, how did you resolve?
- If this is due to a corrupt file, how would I go about finding that corrupt file?
Any help would be appreciated. I'm up against a deadline about to get into panic mode. thanks!

Michael,
Try cutting your sequence into ten minute segments to narrow down the problem, if indeed it is a corrupt clip or file.
You may also want to post your sequence settings, also do you have any stills in your timeline, if you do are they in RGB color space and not CYMK
DM

IPad 2 stuck on apple logo and not charging but keeps rebooting without getting to the lock screed

My iPad 2 ran out of battery last night while I was playing a game on it, it keeps attempting to reboot but only gets as far as the apple logo before powering off, displaying low battery screen and rebooting again, it has been on it's charger all night, I have tried resetting it but it just starts up again, can anyone tell me how to force it to shut down so it can try to charge before i try it again? (I can't get to the lock or the screen and pressing the power button and the home button together won't work) I thought the charger/cable may have been the problem but no cable or charger seems to work.
It doesn't seem to matter to it if it's connected to a computer or not

I am having the exact same problem!! did anyone figure anything out with this?!?!?!
it just keeps trying to reboot and it only gets as far as the logo then it'll reboot again!!

Capture HD with AVCHD apple intermediate codec

I have captured video from my Canon xha1 previously. Today I went to capture some video. I have my presets to HD with avchd apple intermediate codec. When I go to capture I receive the message "capture preset must have video or an audio digitizer set to capture. Please change the desired preset in the audio/video settings. I go back to system settings and the "audio capture" is not highlighted. I'm not sure if this is how I set the capture preset or if there is something else I am looking for. Any advise is greatly appreciated.

Hi Tom,
The camera settings are on HDV/DV. I haven't changed the setting, that I am aware of. I have tried a few easy set up settings. Last night I set to all formats and HDV. I was able to import video but not audio came through. I also tried HD with HDV or AVCD and received the message about needing a digitized audio preset. Today I received the message my deck could not be recognized. I loaded the footage into imove hd just to check my firewire. Video and audio both came through. Interestingly enough when I tried to import an imovie hd into fce, I received an error message. So my problem went from bad to worse. The other devices connected to my imac is an external hard drive and a printer. In the system profiler my camera is listed under the firewire device tree.
I am going to call Apple again tonight. I have only had this machine a month. So I am not very experienced with what can go wrong. But I guess I'm learning. By the way I have enjoyed your tutorial. I have learned a lot.
Thanks,
Jamie

Convert AVCHD Progressive To Apple Intermediate Codec?

Is there a really simple way to take AVCHD Progressive footage (1920 x 1080 at 50 fps) and convert it into Apple Intermediate Codec (AIC, 1920 x 1080 at 25 fps)?
I ask because when I connect my Panasonic HC-V700 Camcorder to iMovie '11, all I see are these "No 60p" icons over the AVCHD Progressive clips.

Hi, guys. I met the similar problem last month. I recorded many 1080 50p MTS footages by using my Panasonic TM700. I like editing videos with iMovie to share with my family and friends. But I found iMovie can't surpport 60p Import. I had tried different ways to import to iMovie, but I failed. Fortunately, my a friend found a blog post from goole and helped me to convert 50p AVCHD into Apple Intermediate Codec (AIC, 1920 x 1080 at 25 fps).
The link is http://www.editavchdmac.com/make-1080-60p-mts-editable-imovie-mac/.
Here I hope it also give you a big help.

Compressor Fails "QuickTime Error: -50" for h.264 Encoding

When I try to compress movies of 720p resolution or greater to h.264 Compressor often fails right at the start with
"QuickTime Error: -50". Any idea what this is or whether there's a workaround?
This is on an 8-processor Mac Pro (16 GB RAM) configured for 7 distributed processors via Qmaster. Export from QuickTime Player works, but I'm not gaining any benefits of multiprocessors. Other compression (to, say, ProRes422) seems to work fine with these files.
I suspect some kind of memory issue, but it seems to only be happening for h.264 compression, and while these movies are rather large, this machine is quite the beast, with adequate RAM.
Help?
multiple2x3Ghz Quad-Core Intel Xeon Mac OS X (10.4.10)

Hi:
I've been experiencing all sorts of issues with compressor, somewhat like this. I think my quicktime plug-ins are the culprit. Example, I have been exporting directly out of Motion with no problems lately, but when I export to Compressor I see my "Flip4Mac" import window several times, then Compressor either fails to export, or crashes.
I would suggest trying a direct export from FCP or Motion, or whatever your source is. See if that works. Just bypass Compressor and choose your HD DVD option from the export window. It does the trick with Motion.

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

I am unable to get past the apple login screens on my iPad to access my settings menu for a new home network. My Apple password is not recognized so I cannot even get into the settings mode to make a chance. How can I get past the Apple logins?

Hey Dpcupcake,
If you can not get past the sign in screen on your iPad, you will need to use the steps in this article to recover use of your iPad -
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Thanks for using Apple Support Communities.
Happy computing,
Brett L

Quicktime error 0 with compressor

Every time I try to export a sequence from FCP 5.0.2 using compressor I get an error when it tries to export the video saying "quicktime error 0" also when I try to export as a quicktime movie, I get a message saying "general error" im running compressor 2.0.1
any help is greatly appreciated
thanks
~jon

Udate: The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step. Its a mystery why I was getting the error when sending the render to Compressor from within FCPX.
Anyone else that has this issue, please share any solutions if you have them.

Compressor keeps failing - "Quicktime Error 0"

Hi all
Compressor 1.2.1 has decided to start playing up - whenever I submit a sequence from FCP HD 4.5, and use any of the mpeg2 presets (or indeed a custom preset) the Batch Monitor opens fine but the batch fails almost immediately, with the error message:
"QuickTime Error: 0"
Neither Compressor or Batch Monitor are crashing, the encodes are just failing. I've tried exporting from several different sequences in different projects, and they all fail.
One of the sequences is only 20 seconds long, just a clean clip captured from tape, no added effects, transitions or edits. So it's not that there's a tricky or dodgy bit of rendering or processing in the middle of the sequence that's making it stumble.
My sequence video setting is Uncompressed 8-bit 4:2:2 - could Compressor be having problems with uncompressed video? Seems unlikely...
Oddly, the mpeg-1 preset in Compressor seems to work fine, it only fails on the mpeg-2 presets.
Any ideas how to fix this?
Dual 2.5 GHz PowerPC G5 Mac OS X (10.4.6)

Im have the same problem as well. Did you guys ever figure out how to resolve the issue?
It seems like this error came up alot in previous versions of fcp, and it was tied to currupt/missing render files or missing mpeg2 components. I think the error is a bit different for fcpx. Ive tried everything I can think of as well.
Thanks,
Carlton
Project is 1080p - 1 Hour:45 - from canon dslr

Quicktime Error:0 with Compressor 4

Here's what I'm working on:
Mac Pro Quad-Core
16gb RAM
Mac OSX 10.7.5
I"m exporting from FCPX 10.0.7 to Compressor 4. I have an 82 minute timeline. When Compressor opens, I select the standard DVD presets for mpeg2 video and ac3 audio. The audio file renders fine, but the video files fails and I get this error- "Failed: Quicktime Error: 0"
When importing every source file, I have optimized media selected. Any ideas whats causing this?

Udate: The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step. Its a mystery why I was getting the error when sending the render to Compressor from within FCPX.
Anyone else that has this issue, please share any solutions if you have them.

HOST Failed errors with multi-core processing in Compressor

I used Digital Rebellion's Pref Mgr to trash all prefs; then Compressor Repair to fix them. Rebooted. Stopped Qmaster. Reset services. Established 5 instances ( I have 8 core Xeon 2.8ghz Mac Pro ). Restarted Qmaster sharing. Opened FCP file, sent to Compressor. Selected DVD settings. Chose cluster I set up in Qmaster. Submitted. Instant "HOST Failed" error messages on the five instances that appeared in Batch Monitor.
Help. Tired. Frustrated. ******.

If you really are running 10.6.2, I'd start by running all software updates.
See what happens if you export a 5 minute section of your movie, export that as a master file and bring that movie into a new Compressor job,
Post a screen shot of the Computer Sharing settings window to see whether anyone can spot something amiss.
Russ

In compressor 4: compressing an apple intermediate 1440x1080 50i file to mpeg2transport stream (PAL) gets me the error "HOST Quicktime Error: 0"

Similar Messages

Maybe you are looking for