In Console every 10 seconds: "FireWire GUID ffffffffffffffff is invalid!"

Subject says it.
Any ideas on what this is all about?
FireWire GUID ffffffffffffffff is invalid!

Which Mac?
Have you tried resetting the FW bus?
Information on resetting the bus can be found in the 5 steps listed here.

Similar Messages

  • Console filling with "FireWire GUID 0000000000000000 is invalid!"

    Hello all. I would appreciate any help I can get. I know just enough to be a danger to my system.
    Im on my 2.4 Ghz Core 2 Duo MacBook Pro. 4 GB mem, OSX 10.7.5. Software is up to date as of yesterday.
    Here's the problem. When I wake machine up, within a minute it slows to a crawl, throwing beachballs all over. When it catches up to itself, it still runs slower than normal. Then I can hear the drive being written on, prompting me to check console.I get this message:
    8/16/13 12:02:15.000 PM kernel: FireWire GUID 0000000000000000 is invalid!
    It repeats every 5 seconds, never ending until a restart.
    It DOESN'T happen all the time. VERY intermittent, and haven't been able to recreate it on purpose.
    Today, I had an external drive plugged into the firewire 800 port. Normally, I do not.
    System info:
    Hardware Information:
              MacBook Pro - model: MacBookPro3,1
              1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Startup Items:
              ProTec6b - Path: /Library/StartupItems/ProTec6b
    System Software:
              Mac OS X 10.7.5 (11G63b) - Uptime: 0 days 0:27
    Disk Information:
              FUJITSU MHW2160BHPL disk0 : (160.04 GB)
                        disk0s1 (disk0s1) <not mounted>: 209.7 MB
                        Sarah's (disk0s2) /: 159.18 GB (30.8 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. Built-in iSight
              Apple Inc. Bluetooth USB Host Controller
              Apple Computer Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
    FireWire Information:
              WD My Book 111D 800mbit - 800mbit max
                        disk1s1 (disk1s1) <not mounted>: 209.7 MB
                        MacBook (disk1s2) /Volumes/MacBook: 249.91 GB (138.97 GB free)
                        Recovery HD (disk1s3) <not mounted>: 650 MB
                        MacPro (disk1s4) <not mounted>: 250 GB
                        BIG External (disk1s5) /Volumes/BIG External: 2.5 TB (2.08 TB free)
    Kernel Extensions:
              at.obdev.nke.LittleSnitch          Version: 3876
              com.wdc.driver.1394_64HP          Version: 1.0.0
    Problem System Launch Daemons:
                 [not loaded]          ftp-proxy.plist
    Problem System Launch Agents:
                     [failed] com.apple.mrt.uiagent.plist
    Launch Daemons:
                     [loaded] at.obdev.littlesnitchd.plist
                     [loaded] com.adobe.SwitchBoard.plist
                     [loaded] com.bombich.ccc.plist
                     [loaded] com.chickenbyte.IconBoxHelper.plist
    Launch Agents:
                     [loaded] at.obdev.LittleSnitchUIAgent.plist
                 [not loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.extensis.FMCore.plist
                     [loaded] com.wacom.pentablet.plist
    User Launch Agents:
    User Login Items:
              iTunesHelper
              BambooCore
    3rd Party Preference Panes:
              Default Folder X
              DivX
              Flash Player
              Flip4Mac WMV
              FUSE for OS X (OSXFUSE)
              PenTablet
    Internet Plug-ins:
              AdobePDFViewer.plugin
              DivXBrowserPlugin.plugin
              EPPEX Plugin.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              GarminGpsControl.plugin
              Google Earth Web Plug-in.plugin
              googletalkbrowserplugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              npgtpo3dautoplugin.plugin
              OVSHelper.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
              VLC Plugin.plugin
              WacomNetscape.plugin
              WacomTabletPlugin.plugin
    User Internet Plug-ins:
              Move-Media-Player.plugin
    Bad Fonts:
              None
    Top Processes:
              3.9   %          WindowServer
              2.8   %          EtreCheck
              2.2   %          Finder
              0.6   %          hidd
              0.0   %          fontd
              0.0   %          ODSAgent
    console log:
    Thanks.

    I received this from Akitio/Thunder Dock Support
    "Thank you for your feedback. We are aware of this problem and yes, it happens when the system comes out of sleep mode and the Thunder Dock is connected to your system. It does not affect the functionality of the product but it does tend to fill up the console with error messages.
    Unfortunately, we cannot fix this with a simple firmware or driver update and you would have to return the product to us, so that we can replace it.
    Thanks for your help

  • /var/log/system.log - kernel[0]: FireWire GUID fffffffffeffffff is invalid!

    Recently been seeing the following kernel messages within /var/log/syslog.log file however no FireWire devices are connected. There's been not impact on the system performance when FireWire davices(iPod 3G & 30Gb HD via FW enclosure) are connected and being used. Any ideas were these messages are coming from.
    Jun 2 12:09:44 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:09:49 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:09:54 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:09:59 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:04 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:09 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:14 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:19 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:24 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:29 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:34 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:39 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    Jun 2 12:10:44 whiteCider kernel[0]: FireWire GUID fffffffffeffffff is invalid!
    iMac 20" Intel Duo (2Ghz, 250Gb, 1Gb, 256Mb VRAM)   Mac OS X (10.4.9)   PowerBook G4 667Mhz (DVI);iPod 15Gb (3G);iMac Rev.B

    I'm having a hard time analyzing where this problem come from.
    Immediately after upgrading to 10.4.11, I thought the messages had disappeared and my hard drive was finally working correctly. I mounted it correctly and transferred about 7GB with no problem at all.
    However, some time later I connected the hard drive again and got a hard crash (finder, the applications freeze with no recovery => hard reboot). This was while the console was outputting the "Firewire GUID XXX is invalid!" message.
    Hardware Test returns no error. Here is a sample log I got when connecting the drive, a while back:
    Oct 18 07:08:43 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:08:48 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    <repeated every 5s>
    Oct 18 07:09:48 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:09:49 Totoro kernel[0]: /SourceCache/AppleFWOHCI/AppleFWOHCI-296.4.0/AppleFWOHCI.cp
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: I/O error.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: I/O error.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: I/O error.
    Oct 18 07:09:52 Totoro kernel[0]: jnl: dojnlio: strategy err 0x5
    Oct 18 07:09:52 Totoro kernel[0]: jnl: end_transaction: only wrote 0 of 37376 bytes to the jo
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s5: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:52 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:53 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:09:56 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:56 Totoro kernel[0]: HFS: err 6 reading VH blk (Olympe)
    Oct 18 07:09:56 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:56 Totoro kernel[0]: HFS: err 6 reading VH blk (Olympe)
    Oct 18 07:09:56 Totoro kernel[0]: jnl: flushing fs disk buffer returned 0x6
    Oct 18 07:09:56 Totoro kernel[0]: disk1s3: media is not present.
    Oct 18 07:09:56 Totoro kernel[0]: jnl: dojnlio: strategy err 0x6
    Oct 18 07:09:56 Totoro kernel[0]: jnl: writejournalheader: error writing the journal header
    Oct 18 07:09:57 Totoro kernel[0]: jnl: close: journal 0x3aefc98, is invalid. aborting outsta
    Oct 18 07:09:58 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:10:03 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:10:08 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    <repeated every 5s>
    Oct 18 07:12:08 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:12:12 Totoro kernel[0]: /SourceCache/AppleFWOHCI/AppleFWOHCI-296.4.0/AppleFWOHCI.cp
    Oct 18 07:12:13 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:12:18 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    Oct 18 07:12:23 Totoro kernel[0]: FireWire GUID ffffffffffffffff is invalid!
    At this point I think it might be a problem with the firewire hardware on my macbook, but I have no certainty...
    Any ideas ? Shall I return my laptop to a repair center ?

  • Console messages every second

    I am getting "INFO NativeIoPipeManager:50 - Found candidates: 0" every second in the console. I have no clue when it started or what the cause can be. Any pointers appreciated.

    I am getting "INFO NativeIoPipeManager:50 - Found
    candidates: 0" every second in the console. I have
    no clue when it started or what the cause can be.
    Any pointers appreciated.
    Do you run camino browser?
    http://www.google.com/search?hl=en&lr=&q=NativeIoPipeManager&btnG=Search

  • I get 3 messages in console every 10 seconds

    A few days ago, i noticed a process running in my task manager. Something along the lines of, "Seagate data manager". The reason it was there is because my friend installed some software that would let us use his Seagate hard drive (it would not work on a mac without it). I was annoyed that this process was running on start-up years later when i did not need it any more. I searched though my Mac and found no apparent way to uninstall it, so i decided to find every file that had the word "seagate" and delete it. Probably not my brightest moment, i know, and technically it worked. I dont see the process running any more, but now i am seeing the fruits of my stupidity as i get these 3 messages in console every 10 seconds from what i think is my Mac trying to launch the process, but cant find the files that i deleted. I deleted 2 files. I cant remember exactly what they were called or where they were from. I think one was from "Macintosh HD > Library" and the other was from "Macintosh HD > System". I know that one of the files had the icon that looks like a little white Lego piece (see attachment called "icon").
    Is there anything i can do?
    here is what console says:
    4/18/12 9:09:01 AM
    com.apple.launchd.peruser.501[97]
    (com.seagate.SeagateStorageGauge.plist[794]) posix_spawn("/Library/Application Support/Seagate/Seagate Storage Gauge.app/Contents/MacOS/Seagate Storage Gauge", ...): No such file or directory
    4/18/12 9:09:01 AM
    com.apple.launchd.peruser.501[97]
    (com.seagate.SeagateStorageGauge.plist[794]) Exited with exit code: 1
    4/18/12 9:09:01 AM
    com.apple.launchd.peruser.501[97]
    (com.seagate.SeagateStorageGauge.plist) Throttling respawn: Will start in 10 seconds

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • OS 10.4.7 finder crashing every second

    I have the console log and a witness, for those who think I am hallucinating.
    Last night this happened twice. Firefox crashed, and took a couple of open applications with it. Rapidly, the finder crashed, opened again, crashed, opened again, rinse and repeat, the remaining open applications crashed, and the finder opened and crashed repeatedly approximately every second. It was like a slow strobe light. I watched in amazement for a while then powered it off. The apps that phone home and report crashes crashed too, but all crashes were written to the console log (I haven't checked the app logs themselves yet.)
    My son went back to what he was doing, to apologize to the friends he was chatting to, and the whole thing happened again. We powered off and I declared it bed time.
    I started in safe mode this morning and it is OK so far.
    My son thinks the trigger for the initial crash was MSN web messenger running on Firefox and using Japanese language.
    Isn't OS X designed so that when an application crashes that is the only one that crashes and other applications and the system itself are protected? What could be going on here? While my son is waiting for his PC to come back from the repair shop, should I let him chat with his Japanese friends on my Mac or ban him?
    Pam
    (P.S. I have good reasons to use Firefox not Safari, but that is a different topic.)

    I'm glad there is someone else out there who has seen this. I was worried I would have no cred at all. My son is studying software engineering, and has studied computer science, and stresses his PC to the max when gaming, and he has never seen any computer anywhere crash like that.
    If he asks to use my Mac again, I will make sure all the Japanese fonts are enabled (I have hundreds of fonts, so won't enable them all).
    Add to the weird stuff: an iCal alarm reminding me to put out the garbage stayed open and I was able to close it even with the finder flashing on and off like that. My garbage note was the only thing that survived.

  • TCCD crashes every second

    Dear All,
    I've got a problem with TCC similar to https://discussions.apple.com/message/19128438#19128438.
    There are 2 accounts in my macbook pro. If I log in with the second user then tccd crashes every second and that makes impossible to use most of the programs (Safari, Contacts, Mail etc).
    There is no tccd db created for this user. The com.apple.TCC folder doesn't exist in ~/Library/Application support/
    If I open the Console then I see how crash reports are generated. Every second I've got a new tccd crash report.
    The system is freshю I just got out of the box in February. Any help is appreciated.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    This time you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.

    I am getting a pop up on my iPhone 4S asking password of my iCloud even though I feed the password but still keep on asking the same thing every second so I am not able to use my iPhone.at various times it asks different passwords.

    Curretly, there is an iCloud blackout.  It started this morning around 2AM California time (Pacific), 5AM New York (Eastern).  A lot of people have been having issues all day, including me.  No iCloud services are online.  Even Find My iPhone is down.

  • When I plug in ipod, it connects/disconnects every second, forever..Win-7

    My ipod worked fine when I was running XP, but when I changed to Windows 7 (32bit), it started doing this thing where it would disconnect and connect every second, for as long as it's little heart desired.
    i tried:
    -letting it die
    -restarting it
    -all possible solutions provided by itunes help
    -putting it into disk mode
    -reformatting it (it worked on dad's comp: win xp)
    other facts:
    -it still charges
    -still plays music when not connected to computer

    Having the same problem with Vista Ultimate 64 bit. Started about a month ago. Gen 1 iPod video that I have updates and connects fine, just not my 4Gen Nano. Sent it in for repair, they sent me back a different one, having the same problem.

  • Create data merged document with data on every second page?

    Is it possible to create a data merged document with the variable data only on every second page?
    I have set up the pages with the variable data as a master page (on every odd page) with the text box and paragraph style all set up, and I have set 'override master page items' so the data can be placed, but InDesign seems to freeze up when I try to create the merged document?

    There should be no problem doing the merge with a two-page master and a two-page template document with fields only on one page (and off the top of my head there's no reason to move them off the master page if that's where you put them). I think the problem here is that rachrachm already has a file of 500 pages (based on another thread asking how to apply masters to every other page).
    It's potentially possible to simply place the data file (without the header row) as a text file and auto-flow through the master page frames (can't say for sure without seeing the files), or if the pages without the merge fields are the same just, remove all but the first two pages from the template and do the merge.
    As I metioned earlier, though, this is a very inefficient method of producing that sort of document. A true variable data print flow would be better (you'd need to find a commercial printer who can do it with your data file), or the home version would be to make one single page file for the static content, print 250 copies (plus a few extras, just in case), then make a single page merge template, do the merge, and print that on the back of the already printed pages, or as a separate page. It is immeasurably faster to print multiple copies of a document than it is to print a document that has multiple identical pages.

  • "Ghost" page numbers on every second page - how to remove?

    Hi,
    I'm setting a short book with Pages and after importing from Word, I'm seeing duplicate, partially hidden additional page numbers on every second page. I'd like to remove them entirely, keeping Pages' page numbering. Removing and inserting page numbers doesn't help and the second set of numbers can't be selected in any way (clicking, dragging don't work). One solution would be to re-import from word, deselecting page numbers beforehand, but I'd rather like avoid this step as I made many changes in Pages.
    Here's a screenshot showing the duplicate page numbers: http://dl.dropbox.com/u/3304376/pages_bug.png
    Does anybody have an idea how to remove them?

    Hello,
    Sometimes in the process of importing from Word, page numbers are improperly converted to Master Objects or Background Objects. Go to Format > Advanced > Make Master Objects Selectable. Then, with the cursor in the Margin of the document, press the Command Key (Cursor changes to an Arrow) and drag the cursor diagonally across the page number to select it. Then press the Delete key and the number should be gone. You need to check carefully to make sure that you have eliminated all the instances. There may be one per Section.
    Jerry

  • Refresh only a region in a Page automatically every second

    Dear All
    I have a page in my application which would display the remaining seconds like 20,19 etc and when it reaches 0 the webpage should redirect to the calling page. I have set a counter for the same and is calling meta refresh tag in the page header every second for resetting the counter. Everything works fine.
    My question is whether there is any other way instead of using the meta tag as this will refresh the full screen. I just need the region containing the counter only to be refreshed and displayed on the screen.
    Thanks

    Hi,
    HTML regions do not support native region refresh like e.g. classic reports.
    You need write own JavaScript to fetch data using AJAX.
    Regards,
    Jari

  • "Last devices used" menu every second over Ovi map...

    Hello all,
    I installed Ovi Maps on my phone, and have a huge problem with it: Every second the"Last devices used" pops up and goes away again.
    Since a few years I own (and use) a Nokia N95, and I just used 'Setup Nokia Maps Update 1.0.8.exe' to get Ovi maps on my phone. Apparently I had to use 'Nokia Software Updater' to make sure I got the latest version. Done that too.Next step is to use the Nokia Map Loader to get the maps on there. Done that too.
    Here is the version info of the installed map:
    I have Bluetooth enabled. Now, when I use the maps, every second the"Last devices used" pops up and goes away again. Mildly irritating would be a severe understatement here. Switching Bluetooth off and starting the map again gives the question "Bluetooth is currently switched off. Switch on?". Every second. It seems impossible to answer the popup-question or do something with the popup-menu.
    Is this a known prob by anyone, and can you please tell me a fix or workaround (preferably a fix of course)?
    Thank you,
    wlamee
    Solved!
    Go to Solution.

    And I got a nippy reply from the Benelux Nokia Care.
    The trick is I had to go to Tools -> Settings -> General -> Positioning -> Positioning Methods, and switch off 'Bluetooth GPS'. I think I always ahd this switched on and it never complained with the standard Nokia maps, but I'm not sure - I think I saw that menu only once, when I was palying with my GPS and the original maps.
    But hey, it's fixed. Cool!
    wlamee

  • Updating JTable every second, want to ignore these events in my listener

    I have a JTable that I update every second using
    table.getModel().setValueAt(data, row, col);I'm also reacting to when the user clicks on a row in a the table, using a ListSelectionListener:
    public class MyTableListener implements ListSelectionListener {
              public void valueChanged(ListSelectionEvent e) {
                   if (e.getValueIsAdjusting()) return;
                   //do stuff
    }And of course I've done this:
    table.getSelectionModel.addListSelectionListener(new MyTableListener());Problem is, every time I update the table data it generates an event handled by valueChanged() above. I need to prevent this.
    Do I need a customized table model for this?
    Thanks!

    Found the problem: I forgot I was using JXTable, not JTable. Here's my example:
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.table.*;
    import java.awt.*;
    import org.jdesktop.swingx.*;
    public class Test {
         JXTable table = null;//change this to JTable to fix
         public class MyTableListener implements ListSelectionListener {
              public void valueChanged(ListSelectionEvent e) {
                   System.out.println("event="+e.toString());
         public Test()
              JFrame frame  = new JFrame();
              String columns[] = {"one", "two"};
              Object data[][] = {{0, 0}, {0, 0}, {0, 0}};
              table = new JXTable(data, columns);//change this to JTable to fix
              table.getSelectionModel().addListSelectionListener(new MyTableListener());
              frame.add(new JScrollPane(table, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED),
                          BorderLayout.CENTER);
              startThread();
              frame.setVisible(true);
         public static void main (String args[]) {
              Test test = new Test();
         public void startThread()
              class RefreshThread extends Thread {
                   public void run() { try {
                             while(true) { SwingUtilities.invokeLater(new Runnable() {public void run() {
                                       updateTable();
                                  sleep(1*1000);
                        } catch (Exception e) {e.printStackTrace();}
              RefreshThread rt = new RefreshThread();
              rt.start();
         public void updateTable()
              TableModel model = table.getModel();
              try {
                   for(int row = 0; row < model.getRowCount(); row++)
                        model.setValueAt(System.currentTimeMillis(), row, 0);
                        model.setValueAt(System.currentTimeMillis(), row, 1);
              } catch (Exception e) {
                   e.printStackTrace();
    }When I change it to a JTable, valueChanged() is not called every time I programmatically update the table.
    If it's a JXTable, valueChanged() is called with every update. Annoying!
    To compile/run the JXTable version you'll need something like
    java -cp swingx-1.0.jar:. TestAs for the events themselves, I added print statements with e.toString() and the events are not distinguishable from user interaction. I wonder if this is a JXTable bug or feature.
    Thanks!

  • How to make Mavericks Activity monitor refresh every second

    I noticed that the Mavericks version of Activity Monitor now refreshes only every 5 seconds.  It used to be every second.  I am guessing they intend to make Activity Monitor more energy efficient this way, but is it possible to make it refresh every second like it used to ?
    Thank you !

    All right,I have set up my Philips LCD vertical display content with normal built in screen... need playing with xrandr & xorg.conf more then....
    one question, intel driver in linux support vertical screen?
    Last edited by andywxy (2008-11-19 15:23:01)

Maybe you are looking for