In Content Server video not play

Hi All,
In my one of the project they have Content Server but they have one issue in Content Server
Generation 2
version 5.3x
When we open Contenet server page ther we not able to see silverlight video (message-you can not paly this video) but from anyPlayer we can see this video
We install new silverlight version also but problem was same.
Please Suggesation for this.
Regards
Yogesh

hello all
i am facing problem in data carrier creation actually i am creating data carrier type PC and i want set as default for all desktop
after DEFINE DATA CARRIER TYPE SERVER, FRONT END and Select PC and IDENTIFY FRONT END COMPUTER its shows
No entries found that match selection criteria
Message no. SV004
Diagnosis
No entries were found when importing data from the data base.
Procedure
If you have specified selection conditions, start the transaction again with conditions that are less restricted.
You can make new entries independently of this. To do this, select the function New entries in menu Edit.
help me

Similar Messages

Video not play on phone

Mp3 play but video not play my phone
my Email add. [email protected]
Moderator's note: E-mail address was removed. Please don't publish your personal contact information on a public forum.

sharankumar1, which phone model do you use? Nokia phones are a bit picky about the file content, the codec. If you tell me your model, I tell you the available codecs. In the meantime, you have to convert your videos …

When using ipad4, why do videos not play on Google? Audio works fine

WWhen using ipad,why do videos not play on Google? Audio still plays. I have reset the Google app and it will be ok for short time but then reverts back to not playing videos.

Hi Vernon70,
Welcome to the Apple Support Communities!
I understand that an application you downloaded from the App Store, Google, is not functioning as you would expect. In this situation, I would recommend following the troubleshooting steps outlined in the attached article.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Best regards,
Joe

Content server is not running.

All,
I have rather peculiar issue. The external 10.1.3.1 content server is setup against EBS 12.1.3.The content server is running fine and I was able to upload content using it. I fail to upload content all of the sudden until EBS is bounced. Nothing changes on content server side and again it works for day or two and stops and throws "Content server is not running" error. Is there any EBS configuration that can cause this behavior? I do not even see the request being logged in default-web-access-<date>.log on content server that indicates that it is not even reaching content server. It works fine in TEST environment and in PROD it is behaving in this manner. This is a new setup.
Any pointers are appreciated.
Thanks,
Faisal

The fact that bouncing EBS fixes the issue temporarily indicates that the problem is most likely on the EBS end, but we haven't encountered that specific issue. What OS are you using to host EBS? Are you purging the J2EE cache when you bounce the services?
Feel free to reach out to Anne or myself if you'd like to dive into this. We could test with an alternate content server to see if that helps isolate the problem.
Best,
John Hobart

Embedded MP4 videos not playing in iOS Safari

Hi everyone,
I'm having a problem with embedded MP4 videos (e.g. YouTube videos) not playing correctly in Safari. When I try to play one, I get one of two problems:
1. On my (first gen) iPad, Safari usually crashes.
2. On my iPhone 4, videos will load but only play audio, not video, though when I tap on the screen the "play" and "pause" symbols appear.
Has anyone else run into this problem? Or know how to fix it?
Thanks,
Mike

Ok, I fixed it. Go to some embedded Flash video, click to run and then right click to get Global Settings for Flash. Go into Storage and make sure you aren't blocking any data from being stored on your computer. At the very least choose the "ask me" setting. (For good measure I also went into Advanced and clicked to Delete All Data associated with Flash. But when I restored Block for data storage the videos stopped working, so that seems to be the answer.) I'd be interested to hear if this works for others.

Why are my videos not playing the right way up

Why are my videos not playing the right way up

I took four video clips while on a trip this week. Two are oriented the right way (playing wide on the device and imported correctly). The other two are Tall and not oriented right. Orientation is 90 degrees to the right. I don't know why this is happening on occasions. Even some pictures I took did the same **** thing. It's weird. And I can't figure it out. The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

How to check file is exists in specified path in content server or not

i m using JDevloper 11.1.1.6.0
I want to upload file using RIDC functions,but before uploading it i have to check wheather it is already present on specified path in content server or not.
How i check it.

I tried to write a (simpler) version of my own code:
    public static Results CheckInToFolder(File f) {
        // create the binder
        DataBinder checkinDoc = idcClient.createBinder();
        // populate the binder with the parameters
        checkinDoc.putLocal("IdcService", "CHECKIN_UNIVERSAL");
        checkinDoc.putLocal("dDocTitle",
                            "Document checked in through RIDC at " +
                            new Date());
        checkinDoc.putLocal("dDocType", "Document");
        checkinDoc.putLocal("dDocAccount", "");
        checkinDoc.putLocal("dSecurityGroup", "Public");
        checkinDoc.putLocal("dCollectionID", "909964822906001607");
        // add a file
        // execute the request
        try {
            checkinDoc.addFile("primaryFile", f);
        } catch (IOException e) {
            myExecutable.logEvent("File" + f.getName() + " not found.");
            return null;
        ServiceResponse checkinResponse;
        try {
            checkinResponse = idcClient.sendRequest(userContext, checkinDoc);
            myExecutable.logEvent("Check-in successful. Size:" + f.length() + " bytes");
        catch (oracle.stellent.ridc.protocol.ServiceException e) {
                        myExecutable.logEvent("ServiceException");
                        e.printStackTrace();
                        return null;
        catch (IdcClientException e) {
            myExecutable.logEvent("Check-in failed.");
            e.printStackTrace();
            return null;
        DataBinder checkinData;
        try {
            checkinData = checkinResponse.getResponseAsBinder();
            Results res =
                new Results(checkinData.getLocal("dID"), checkinData.getLocal("dDocName"));
            myExecutable.logEvent("Successfully got response - dID is " +
                                  res.getDID() + ", dDocName is " +
                                  res.getDDocName());
            return res;
        catch (oracle.stellent.ridc.protocol.ServiceException e) {
                        myExecutable.logEvent("ServiceException2");
                        //e.printStackTrace();
                        return null;
        catch (IdcClientException e) {
            myExecutable.logEvent("Unable to get response.");
            e.printStackTrace();
        return null;
    }What I'm getting is this:
Mon Aug 13 14:51:29 CEST 2012 0ms: Started
Mon Aug 13 14:51:29 CEST 2012 57ms: Connection to idc://192.168.44.129:4444 successfully established.
Mon Aug 13 14:51:29 CEST 2012 102ms: Check-in successful. Size:702 bytes
Mon Aug 13 14:51:29 CEST 2012 5ms: ServiceException2
Mon Aug 13 14:51:29 CEST 2012 0ms: Finished
This means:
a) it does, indeed, return the exception (oracle.stellent.ridc.protocol.ServiceException)
b) you could use this mechanism for your code
c) it is, indeed, primaryFile.name what's being checked
I will also take a look at the other service to perform the check prior to check-in service call.

U310 Touch - Videos not playing after 8.1 Update

Hello,
I have updated from Windows 8 to 8.1 and updated all my drivers on my U310 Touch.
However, I seem to have a problem with web based videos not playing videos on the internet.
This seems to happen on every kind of web browser, including IE, Firefox, Chrome, and even Steam.
If anybody knows how to fix this problem, that'll be great.
Thanks in advance.

Since the upgrade to 8.1.1 my iPhone 6 stopped recognising the fingers I had stored. I've deleted and addrd them again (which went as norma) and it still has problems recognising them. Seems very intermittent now, whereas before this upgrade was very reliable.
I've reverted to a pin code :-(

Yahoo video and other video not playing

Yahoo and other video not playing in firefox 37.0.2
They played automatically 5 days ago....since then video screen is blank...no 'play' button
I have updated Flash several times
Tried to play these videos on IE....don't play there either.
Thanks for your help!

Note that your System Details List shows multiple Flash plugins.
# Shockwave Flash 15.0 r0
#Shockwave Flash 17.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
You can find the latest Flash player versions for Firefox on this page:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

You tube videos not playing

You tube videos not playing on safari, my flash player is up to date, i tried to refresh, quit safari, again tried to play, but every time it shows "an error has occurred, please try again later". I did almost everything to make it work but its not working... help needed

Try deleting the cache and cookies for YouTube.

DVDSP Help - Video not playing in Viewer during some assets, only audio...

Video not playing in Viewer during some assets, only audio until paused. once you hit the space bar or pause, the video shows up in viewer? same results when burnd to disc.
when dragging cursor through out timeline (track 1) video shows up in viewer fine too.
any advice on what could be wrong?
at first i was thinking this was a memory problem, i added another Gig of ram and the problem still exhists.
thanks!

Hi Crazy Dan:
It's a kind of bug in DVDSP Simulator. If you build your project in your hard drive and test it with DVD Player all video will play fine.
I would like to tell you where exactly the problem is located, but it's just a Simulator problem.
Try building your project.
Hope that helps !
Alberto

I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

. I'm running Windows XP and FF 8.0. I'm having more trouble than ever with intermittent streaming and videos not playing all the way through. What is the easiest way to fix this?

That may be a problem with the VLC plugin. VLC has never worked for me properly on the occasions that I've tried it on Windows and Linux, so I have stop using it. There are usually other plugins or media players available that work better.
What kind of media files are that?
For WMP files you can install the new Windows Media Player plugin you can also try RealPlayer and QuickTime if it is about media that those programs can handle to see if that works better.
* https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
* http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
* http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

Facebook videos not playing on iPad Air(safari browser)

Why do my Facebook videos not play in iPad Air(safari browser) but same video play nicely on iPhone 4(safari browser). It asks me to download flash player to play on iPad but plays fine on iPhone without giving any prompt to download flash player.

You should not have trouble playing using the FaceBook app.

Video not played using JMF while tramitting stream over RTP

video not played using JMF while tramitting stream over RTP
I am using code to tranmit video using RTP using JMF and i am able to successfully get the video on client side
Code to send the video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVTransmit2.java
code to recieve video over rtp
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html#source
My problem is i am not able to play video in AVTransmit2.java.
If i create a player using datasouce, eigther i get player already occupied or a black screen.
please help me running the video on Transmit side as well.
NOTE: i am using web cam for video source
Edited by: qasitouch on Dec 23, 2009 5:55 AM

I am not getting any error on consol, rather video is not displayed on media screen but black rectangle.
On Transmitter
     // Try to create a processor to handle the input media locator
     processor = Manager.createProcessor(ds);
createPlayer(Manager.createCloneableDataSource(ds)); // here i am craeting a player to show the video on transmitter end aswell.
Player code:
     private void createPlayer(DataSource ds) {
          try {
               Player player;
               if(processor!=null)
                    System.out.println("processor: " + processor);
                    player = processor;
               }else{
                    System.out.println("null is processor");
               player = Manager.createRealizedPlayer(ds);
               Component video = player.getVisualComponent();
               JFrame mediaFrame = new JFrame("Camera Screen");
               mediaFrame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
               mediaFrame.add(video);
               mediaFrame.setSize(300, 300);
               mediaFrame.setVisible(true);
               player.realize();
               player.start();
               player.prefetch();
          } catch (NoPlayerException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (CannotRealizeException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (NotRealizedError e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (Exception e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
I am not getting any error and not running on the same side. My problem is showing video on Tranmitter end.
Using above code i can create player and a black screen is showing, i am ubable to find, why video is not played in screen.

FLV videos not playing correctly in Captivate 6

I am running into an issue where my FLV video is not playing correctly when my Captivate project is exported out and saved to the web. The FLV video is about 20 mins long (~100 MB) and it is being streamed from Kaltura. The FLV video is inputted into the Captivate project as a multi-slide synchronized video across 27 slides. The slides themselves are imported from Powerpoint. The problem that we are running into is that the Captivate project and the FLV video play correctly when viewed with decent bandwidth, but they do not appear to play correctly for users with slower bandwidth. However, if a user views the videos independently of Captivate, they can view the videos correctly, even at slower bandwidth. I have tried hosting the Captivate files on several different webservers, including an LMS. But the issue continues and I'm searching for any type of answers that might help.
Thanks for reading and any help you can provide would be greatly appreciated.
Nathan

Nathan,
Your welcome, if that is the case, then can you try and insert the MultiSlide Video, you can insert the streaming video URL.
You can add the server to you computer as network Drive and then browser to that location, once you do that, the options to add the Video as Streaming can be chose and your Vidoe would remain insync with main playbar, users can play and pause content that way.
See if this can be implemented at your end.
Thanks,
Anjaneai

In Content Server video not play

Similar Messages

Maybe you are looking for