In course quiz issues

Need help with in course quizes in a Captivate 5 project. If you go back to the slide after visiting once and submitting your answer all the buttons disappear and your only option is to exit the course. How do I fix that? Are there other aternatives to using the question slide?

Hello,
Are you talking about my blog? I suppose you are creating your own question slides with click boxes. Click boxes do not cause fading, they are invisible. You can check the slide transitions as Rod does suggest, but those are by default set to 'No transition'. Only first slide is by default set to fade in, last slide to fade out (you can change that in the Preferences, Project, Start&End). Perhaps you have other objects on the slide that do have a Fade in/Fade out effect because most objects do have by default that kind of effects. The click box has its pause point always at the end of its duration, however if you do use buttons you can set the pausing in the Properties panel.
Lilybiri

Similar Messages

  • Quiz issues

    Hello,
    I have a finished project and I'm testing the it at the moment. In the end of the project there's a quiz of 10 questions in different formats. I've set it up so you can do the test 3 times, and if you still haven't completed it you have to retakt the course. It works quite well, but I've encountered some issues. I'll start by saying I'm using Captivate 5.0.
    As I said, you can do the test 3 times, and it works well. If you don't obtain the required score you'll have to press "retake quiz" and the "result page". Next to the "retake quiz"-button there is a "continue"-button as well, but it doesn't work since you didn't pass the test. If you press the "continue"-button before pressing the "retake quiz"-button the quiz acts different from the first time. First of all the pictures looks faded, like it's 50% transparent. Also the slide doesn't change when you've selected the correct answer and press submit. You have to choose you're answer, press submit and then press "skip" to go onto the next question. If you press "submit" again nothing happens.
    This is something I've encoutnered only when I press "continue" before "retake quiz" at the "result page" and the end of the quiz.
    Also another question. It would the the best if the "continue"-button doesn't show at all in the "result page", and only the "retake quiz" if you don't pass the test. Just as there's not "retake quiz" if you pass the test. Any way to set that up to minimize confusion?
    I hope that I've described the problem sufficiently, otherwise fire away the questions
    Thanks in advance.
    Kind regards,
    Patrik

    Hi Patrik,
    Here is a work around: resize the Continue and Retake button to the same size. There is a stacking order in the buttons on Question slide and Score slide. Drag the Retake button (that has higher priority) on top of the Continue button, and it will only appear when the Retake button is disappearing. Beware: stacking order could change if you desactivated and reactivated the buttons.
    I blogged about this stacking order and other things concerning Quiz slides recently:
    Question Question slides in Captivate
    Lilybiri

  • LSO Course Program Issues (Need Instructions)

    We are currently investigating the need for the course program functionality at our organization and have setup a few with mixed results.  We are running LSOFE603 and have been live for over a year so the portal and configuration appears to be correct.  If I subscribe to the course program then a course program can not be found error is displayed.  In addition to this I can book in the seperate course types from the learner portal but titles seems to be missing from the display.   
    Does anyone know where I can find clear step by step instructions on how to setup a course program? Everything checks out okay from our setup but we continue to have issues.  Thank you in advance for your response(s).
    Regards,
    Matt

    use lso_pvct > Create Course program
    Enter abbrev, name, language, & save
    when you save, it will ask you to manage course blocks.
    you can create sequential or non-sequential course blocks.
    You must save the blocks before you can add course types to them.
    Once saved, edit the course program > Course blocks
    add your course types to the blocks; either sequenced or non-sequenced.
    config for course programs is
    1) number range intervals
    2) relationships for the course type object EK
    3) Define object type > Structure search LSO-l-ek
    4) Followup for course type EK

  • Adobe Presenter 8 Quiz issues

    We're having issues with the way quizzes are acting in SCORM packages created with Presenter 8. Users are having the quiz freeze and unable to answer, some questions are already marked wrong when they start the quiz, and some questions (particularly matching questions) display incorrectly. We are using Moodlerooms Joule as our LMS. Any ideas?

    I was having similar problem. So many that I gave up on the quizzes altogether.

  • Captivate Quiz issue

    I created a 8 question quiz in Captivate at the end of a 80
    slide project. The quiz drops off elements of the quiz slide, like
    the top radio button of a multiple choice question and no answers
    are correct, even when you are able to answer them correctly with
    the information displayed. The quiz slides do not advance properly
    either. The quiz summary never appears. The rest of the project
    runs fine. I can copy only the quiz into a seperate project and the
    quiz will run WITHOUT an issues.

    Hi mymini7 and welcome to our community
    First off, I'd like to point out that I'm simply a recognized
    volunteer here. I'm not an Adobe employee.
    As with any software, it's not common to see limitations
    listed among the "selling features". The typical run-of-the-mill
    movie is said to be anywhere between 50-65 slides long. But as with
    anything, this varies. Factors such as:
    * Physical dimensions of the movie
    * How much audio is being used
    * How many objects are being used
    can come into play here. I've heard of folks with 30 slide
    movies that are just "too large" for things to work right. And at
    the other end of the spectrum, I've heard of folks that regularly
    create movies 130 slides long that play with no issues whatsoever.
    Anyone encountering issues should really report them via
    this
    link.
    Sincerely... Rick

  • Quiz issue on LMS

    Hi all.
    I really hope someone can help - I have been haunted by this
    problem for weeks now!
    I have created my first quiz on Captivate 3. When I launch it
    on LMS as soon as I click on the first question I get a pop up
    message saying: is this the end of your learning activity? Click
    yes to exit or cancel.
    I have reviewed my quiz property and set up hundreds of
    times! Is this and issue within Captivate 3?
    Thank you so much for a reply.
    Opunthia

    Not sure which version of SumTotal you are using, but this
    has worked well for me using SumTotal 7.2 and Captivate 3 (SCORM
    1.2).
    The SCORM.htm file is a template file that Captivate uses
    each time your project is published. If we make changes to this
    file, it will affect all future projects we publish. If you follow
    these steps correctly, we can replace the original SCORM.htm, with
    another one that will prevent the premature "end of activity"
    message, until the user clicks the exit button from within your
    captivate project.
    Step 1: Back up this file (just in case).
    C:\Program Files\Adobe\Adobe Captivate
    3\Templates\Publish\SCORM.htm
    Step 2: Edit the original SCORM.htm file.
    Right click on the SCORM.htm file. Choose 'Open With' and
    select "Notepad' (or your preferred HTML editor).
    Delete the existing code, and paste the new code into it.
    (See bottom of my post)
    Step 3: Save the file, and publish your project.
    And we are done! Save the SCORM.htm file and close it, launch
    Adobe Captivate 3 and publish your project!
    It is very important that the exit button from within Captivate
    is used. You must use a "skin" in Captivate 3, so that there is
    an exit button. Using the Close button from within Internet
    Explorer will cause your results to not be sent to the SumTotal
    LMS.
    As long as you make it very clear at the end of your project
    which exit button to use, it shouldn't be a problem.
    New HTML code:

  • LSO : Course Appraisal Issue

    Hi All,
    Please let me know whether its mandatory for  Training Administrator to create Appraisal Document for each participant for the course manually or is there any way out to automatically create the document for all partipant of the course.
    A quick reply will be appreaciated.
    Regards,
    Deb
    Edited by: Debdarshan Panda on Dec 17, 2008 9:44 AM

    Hi Debdarshan,
    Did you ever get an answer on this one? Or are you using a manual process`?
    We're looking into the same issue at the moment
    Best regards
    Jakob

  • Multiple Choice Quiz issues

    Hello
    I just build a multiple choice quiz using Captivate 3. The
    quiz have3 right answers. I set it up so that the user has infinite
    number of attempts. However after the first try I can try the quiz
    again.
    Has anyone experienced this problem. If it's not fixable, my
    project is doomed.

    Can you restate the problem you're having? Is it that you can
    NOT try the quiz again?
    Otherwise, from what you wrote, it doesn't sound like there's
    a problem...

  • Quiz Issues - Not highlighting selected answers when 'back' button pressed

    Any help would be very much appreciated for this problem.
    On Captivate 5.5. and have a few quizzes with anything from 18 questions to 37, the user enters their name and it moves onto the question page.
    For example, the user answers question one and goes forward, then goes back one and the answer is no longer selected but the question is locked. When the user comes to review the quiz, it now says the question hasn't been answered when is has been and obviously doesn't get a mark.
    Anyone else experienced this or have a clue how to fix it? My preferences are as follows:

    Lilybri, I'm not sure if I explained myself well enough in my original post.
    User answers question one - presses submit button. CP moves to next question, no problem.
    User then answers question two, presses submit button.
    User moves back to question two and the button they had selected is no longer selected and the question is locked (it should be locked obviously, but CP should show which answer the user selected).
    When you review the quiz it claims 'you did not answer the question completely'. When you had selected something. Also in tests, it was found it knocked off two points from the user sometimes.
    I've just tested one this morning and it seems to be it'll sometimes happen on first go, or you have to move forward and backwards a few times for it to start up this behaviour. Any help is appreciated.
    https://apps.kcadeutag.com/cbt/CBTs/questiontester/questionsformodule1.htm
    Is a link to one of the modules.

  • Captivate 7 | HTML course loading issues on iPad

    Hi,
    I have created a course in Captivate 7 and published it to HTML 5 version. The published course was uploaded on a server and launched the course on ipad, but noticed that the audio loading delayed. Kindly let me know if there are any solutions to increase the performance of the course so that audio loading is good.
    Below is the link where the course is uploaded.
    http://118.139.169.29/subbuk/For_Adobe_community/Sample/index.html
    Regards
    Chandru

    Suresh,
    Could you please clarify what you mean by your statement? : "The request to audio download happens after content download..."
    Are you talking about the content for an individual SLIDE is downloaded before the audio clip for that slide (in slide-based audio)? Or do you mean that the content for the entire module is downloaded before the audio for a slide is downloaded?
    Also, if you're saying the slide content is downloaded before the audio for that particular slide, then what exactly is the benefit of having preloaders for the project?  Are you saying that with HTML5 content project preloaders are not really much use because content is downloaded slide by slide anyway?

  • Retake Quiz Issue

    Hi there, I would like to have a Retake Quiz button at the end of a quiz.
    This is what is happening:
    1 - The user answers all the questions with 100% success. The score is recorded. I record with an Internal Server - all is good, results are sent.
    2 - The user does not answer with 100% success - in other words - fails to get the mark. In this case, I can see only the Continue button and the Quiz Results are NOT sent to the server.
    I would like that the user is able to choose always from two buttons. One - to Retake the quiz, the other - to continue with the failed result.
    What am I not doing properly? I am with Cp7. Here are some shots of the Quiz Preferences.
    Thank you in advance.
    Bobby

    Hello,
    Waht are your Quiz settings, such as Action on Failing Grade?  But I'm not suer at all that you can jump to another slide than the first Question slide.
    Captivate always considers all quesitons in a file as one Quiz. You really do have two quizzes. One way to avoid this is splitting in two files, each one hveing a quiz and chaining them together. Or create the non-scored quiz slides yourself with standard objects, and be sure not to attach any score to interactive objects like click boses, buttons, text Entry Boses.
    Lilybiri

  • Adobe Captivate 4 Quiz Issues

    My Clear button will not clear the answer if the wrong answer is selected. Once a user selects an answer, it can't be changed. How do I fix this?
    The Continue button on the Quiz Results slide does not continue. How do I fix this?

    Hello,
    Formatting Question slides in CP is sometimes a pain. I cannot give you a proper answer, but it would be great if you filed a feature request to the team to have more control over the styles used in this dropdown list (link is in the main page of this forum). If we are many to ask for such enhancements, it will get higher on the priority list.
    As you probably discovered, in the Properties of the dropdown lists in the Matching Question slide you can only change font and color, not font size. My proper workaround is choosing a font that gives the best result, some fonts really look bigger than others. This is not always consistent with the styles in the rest of the movie, but I adapt all the Text in Question slides to this choosen font.
    Sorry not to be able to help you. Question slides are in the folder, but in SWC-format, and I cannot open those files, even though I have Flash CS4 installed. Perhaps a Flash-wise guy will pop in to help you.
    Lilybiri

  • Captivate 4 - Quiz Issue

    I have developed in captivate 4 - at the end of my e-learning I have inserted a 5 question quiz - but the calculations for the quiz go wrong.
    It keeps thinking that I have 29 questions. There are simulations in the presentations - and I wonder if it is somehow including these. I have checked the quiz preferences and reporting is turned off - can't really think what else to try. Not using an LMS Yet

    Hello and welcome to the forum,
    I suspect that you do not only have Question slides but several scored objects (like Text Entry Boxes, Click Boxes, Buttons) in your project.
    You can check this in the Advanced Interaction view (F9 or in the Project menu). Look in the column 'Points' and 'Add to Total'. At the bottom you will see the total number of points, that will include the scores of those objects. This view is interactive in CP4 - not in CP5, so you can deselect "Add to total' for those objects and I hope that you will see the correct number of questions after this action.
    Lilybiri

  • Course/Quiz problem - please help

    My scenario is that I have around a 30 frame course and 5
    questions on various pages in the course. When going through the
    course I get to a question and answer it...it goes to the next page
    and then I hit back and I'm at the question, then I hit back again
    and I'm on the frame before the question. I then go forward again
    progressing throught the next few frames until I get to the next
    question...this question is now locked without me ever answering
    it. Any way to fix that? Please help if possible.

    We have had similar problems in Captivate 2. I don't know
    which version you are using, but I'm very interested in the
    solution. We have gotten to the point where we don't use the
    built-in quizzes for this reason, and I actually came out here to
    ask if some members use a third-party software as a solution to
    this problem or if Captivate 3 may have solved the problem.
    I am moving to a new company where my products will be
    marketed and I can't afford to have quizzes and interactions
    malfuntion. I am thinking of using rapitivity or another product to
    add re-inforcement exercises to my modules. I'd love to know of any
    fixes for the problem or what third-party products others
    use.

  • Cpt 3 - quiz summary page falsely triggers 100% completion

    I'm experiencing a problem - I've noticed the quiz summary page falsey triggers to the LMS that 100% of the slides are complete when they aren't.
    I'm using Captivate 3 and Sum Total. I have a standalone quiz that is part of a curriculum where the current quiz is a pre-requisite for the next course - in other words, pass the quiz and continue, fail the quiz and you have to keep trying until you pass.
    After a bajillion different combinations, I have found what almost works. The course is set to "Complete/Incomplete" when a user views 100% of slides. The last slide is the "way to go" slide and is only reached when the learner passes. A failing grade goes back to the beginning and doesn't reach the last slide. The intent, according to our LMS admin people, is that a failing grade never completes the course/quiz.
    If I exit part way through, it shows as "incomplete" in the LMS - that is what I want. When you fail, you go back to the beginning - again, what I want. When you pass and you go to the last page, it shows as "complete", which is what I want.
    Here is the problem. When you fail and you find yourself at the quiz summary page, saying, "sorry, you failed", a learner will do one of two things - quit right then and there or click on the button to try again. If the learner quits right on the quiz summary page they get a "complete" message. In other words, regardless of the Quiz Reporting settings, Captivate 3 reports to the LMS that all slides are compete at the quiz summary page. You can add 15 blank slides afterwards and that doesn't matter. I've even put the "way to go" slide near the beginning with the quiz skipping it until it is branched back after a pass - but that doesn't work. For some reason, this one quiz summary page sends a message to the LMS that all slides are 100% complete. I've even removed the slide and put my own in its place but even the competion of the quiz triggers that all the slides are 100% complete.
    I'm at a loss. My deadline was yesterday and I need help!!!

    Hi Michael,
    Are you using SCORM 1.2 or 2004 ? Try both and let me know if you see the same result.
    There were some issues with reporting in Cp3 and were fixed with Cp4, so could you try your project on Cp4 or Cp5.
    Thanks,
    Deepak

Maybe you are looking for