In CRM 2007 WebClient UI - How to change the exit URL?

Good Evening All
When we log off from the CRM 2007 WebClient UI application, the exit url is pointing to www.sap.cpm. Where can we change this to point to our corporate URL or point back to the logon URL?
Sometime back I had seen some information regarding this, but am not able to find it. Any information would be highly appreciated.
Thanks
Anand

Hi Anand,
Check this wiki page
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/crm/howtochangetheURLwhenuserclicksLogOffinnewWEB+UI
Regards,
Shwetha

Similar Messages

How to change the endpoint url of the siebel service ?

Hi All,
JDev : 11.1.1.5
I am fetching data from the siebel webservice. I created the proxy client from the Siebel WSDL in the JDeveloper. It was working fine.
Now the endpoint URL(Server) is changed. This service fails to connect to that server. The service name is same.
I want to fetch the end point urls from a property file, so that, even again if the server is changed, i have to change it in my property file.
How to change the End point URL at runtime before calling the service ?
This is my endpoint URL.
http://oa8181.us.oracle.com:10800/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Now it is pointing to this
http://oa8023.us.oracle.com:7777/eai_enu/start.swe/#%7Bhttp%3A%2F%2Fpolicing.oracle.com%2F%7DPolicing_spcQuery_spcIncidents_spcWF?wsdl?SWEExtSource=WebService&SWEExtCmd=Execute&UserName=AUSTINP&Password=AUSTINP
Give me some solution.

See if this helps:
http://kingsfleet.blogspot.co.uk/2008/12/controlling-what-service-proxy-uses-at.html

CRM 2007 - Webclient Logo replacement

Hi Gurus
In the CRM 2007 Webclient view there is a SAP Logo on the top right corner of the view.
I'd like to replace this with a customer branded logo.
I have reviewed and applied from the blog.
/people/sudipta.sarma/blog/2008/03/28/how-do-you-brand-your-company-logo-in-crm-2007-ui
As well I looked at
http://help.sap.com/saphelp_crm60/helpdata/en/b3/f00c1514c54e67a60b61f7318c14b7/content.htm
I think these maybe referring more to the WEB UI than the Webclient.
Is there a cookbook or Note on this subject, any help will be gratefully received and rewarded.
Regards
Panduranga

Hi.
Go again through blog:
/people/sudipta.sarma/blog/2008/03/28/how-do-you-brand-your-company-logo-in-crm-2007-ui
And read the first comment related with Logo for IC:
BSP "CRMCMP_IC_FRAME"
MIMEs->images->branding->SAP_logo.gif
Regards,
Susana Messias

How to change the task type of bdoc in sap crm

Dear CRM Experts,
I am new to CRM. Want to know how to change the task type of Bdoc from update to insert. I am gettind B doc error due to the reason that under object_task the entry is U , whereas i have to change it to I (insert).
Pls provide deatil answer. Points will be given.
Regards
Rajat
Edited by: Gurinder Pal Singh on Jul 21, 2011 10:17 AM

Hello Rajat,
Please provide us more information about the error you have and it's description so that we can help here arounfd here.
thanks
Willie

How to change the default structure when exporting data in CSV format?

Hello,
can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ?
If it is possible where can we find these structure ? In the blueprint customizing ?
Thank you very much,
Christian

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to change the default sorting in iTunes

Hi,
Does anyone know how to change the default sorting method for all items in iTunes? I use the third option for organizing the library as a whole (the one that has a list of icons for bands that you double click to show only that band's songs). The only sorting method I use is to sort by Album by Year (ascending), this makes the most sense to me. I can tell that iTunes is attempting to remember when I do this for certain artists, but it epically fails at maintaining this sorting pattern.
To be clear, say I open Radiohead and click through to have it sort with the above method. Everything works great, but when I return a few days later to play Radiohead again, the sorting is not maintained. It could be as simple as sorting in a descending direction, or could even be trying to sort by the number it was added in my library.
I'd really appreciate it if someone knew of a way (maybe even through scripts if possible / the only solution) to eliminate this problem and have every (NOT just the artists who I've told iTunes to sort a specific way) artist sort that way.
I don't know if my copy is just corrupt? It may be, since for some artists it's started playing them in the above mentioned order they were added to my library even if I force a sort by album by year (i.e. it will go from playing a 2007 album to a 2002 album and not the 2008 album).
Thanks!

Andrew, I know I am extremely late to the party but I too use Grid View. I had the same problem that you had but have found this to work for me. I used it and it is still holding as my default sorting even after switching between the Artist page and Grid View.
Once you are inside of the Artist page continue to click on the Album column until it shows Album by Artist/Year.
That will give you each album sorted by the year instead of it randomly sorting it for you each time you leave an Artist's page and then back again.
Hope this helps.

How to change the Timestamp In a program

Hi,
We faced a problem today, Some of the critical jobs from a source system are going to short Dump. Unfortunately we couldn't find any lockwaits, deadlocks and any delay in SM37. After analyzing, we came to know that, SAP trace indicates failure occured during program /GLB/RGTCSR_RC_INV execution :
B *** ERROR => DISTRIBUTED_TA_FAILED:
The timestamp for the execution of the program has been set as "20.070.801.000.000", that does mean it will try to retrieve all values after the date 01.08.2007 and the time 00:00:00. Now checking on the code we can see there is a logic written which retrieves the values from the table /GLB/RGTT_CS_RC, checking on the Goods Movement status (wbsta) , timestamp and document number (VBELN_SO) if any. For this case VBELN_SO is blank and vbsta is equal to space (Not Relevant). This retrieval helped to logic to retrieve 706706 document and items from the table. This amount of data is huge and we would like to request BW team to run the program with a smaller timestamp to avoid any inconsistencies and also to avoid the dumps which can occur when we try to play with this huge entries.
Checking on the code, two similar selects have been written on the same table /GLB/RGTT_CS_RC, firstly to select all the document numbers relevant to the timestamp and wbsta value and secondly to check "Get records that may have already been used", depending on the document number and item numbers. But as we are doing a select * it will automatically select VBELN_SO as well as POSNR_SO. Hence, the second select from the same table is irrelevant and it will only effect the performance of the system, in the worst case it will terminate the program with this huge amount of entries. Hence, this logic has to be combined to one single select for which the first select statement is enough. Playing with a huge amount of data 706706, and retrieving from the same table twice can surely result in a short dump. Also there are couple of loops has been done on the same table which reduces the performance too.
Possible solution looks like we need to reduce the time stamp and run it,
can some one tell me how to change the time stamp in a program???

First check the connection with the source system. If its ok then replicate the datasource and activate. Then try with running job.
Time stamp error usually happens when source system in BI and r/3 side differs.

How to change the fields order by pushing the TAB button?

Hello.
I have 4 input fields on a screen that i have build.
When i'm running the screen, I can move from one field to
another by the TAB button.
I need to set a different moving order that is performed by the TAB button.
For example: the fields are 1,2,3,4. if I use the TAB button to move from one field to another- the order is 1->2->3->4.
I want it to be 1->3->2->4.
Is it possible??
Thanks, Barak.

Hi Barak Sahar,
a) set the initial cursor at dynpro level
b) set the cursor positions dynamically using codeSET CURSOR[/code]
Here are the online help links I found:
http://help.sap.com/saphelp_470/helpdata/EN/9f/dbac0b35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_470/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/frameset.htm
Go through below thread...
How to change the sequence of fields accessed with the tab key on a dynpro;&#56907;
Hope it will solve your problem
<REMOVED BY MODERATOR>
Thanks & Regards
ilesh 24x7
Edited by: Alvaro Tejada Galindo on Dec 25, 2007 9:13 AM

How to change the Org Data depending on the Person Responsible?

Hi Group,
I have a requirement relating to Org data changing as :
while creating the activities in CRM, by default I was getting the Org data for the person responsible ( whoever has created the Activity ).
there is a provision that, we can change the Person Responsible for the Activity.
and when the Person Resp is changed, the Org data also to be changed accordingly....
But, this was not happening due to some technical reasons....
So please give me some inputs as how to change the Org data according to the changes to the Person Resp.
Thanks in advance.
Regards,
Vishnu.

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

How to change the date format YYYYMMDD to MM/DD/YYYY

Hi ,
How to change the date format YYYYMMDD to MM/DD/YYYY .
Ex : 20071008 to 10/08/2007
Is there any function module for this ??
Regards
Rahul

Hi Sharma,
check the code:
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-031.
PARAMETERS: date1 RADIOBUTTON GROUP rad1 DEFAULT 'X', "SAP date format YYYYDDMM
date2 RADIOBUTTON GROUP rad1, "Date format like aprial31, 2006
date3 RADIOBUTTON GROUP rad1, "Date format like 31 apr,2006
date4 RADIOBUTTON GROUP rad1, "Date format like DD/MM/YYYY
date5 RADIOBUTTON GROUP rad1. "Date format like DD.MM.YYYY
SELECTION-SCREEN END OF BLOCK b2
FORM getmonth .
SELECT mnr
ktx
ltx
INTO TABLE T_month
FROM t247
WHERE spras = 'EN'.
IF sy-subrc NE '0'.
MESSAGE I "Message - Not able to get month values from the table T247
ENDIF.
ENDFORM.
DATA : temp_date(16) TYPE c,
temp1_date(60) TYPE c,
year(4) TYPE c,
daymonth(11) TYPE c,
daymonth1(11) TYPE c,
month(9) TYPE c,
day(2) TYPE c,
mon LIKE t247-ktx,
len TYPE i .
MOVE date TO temp1_date .
CONDENSE temp1_date NO-GAPS.
MOVE temp1_date TO temp_date .
IF date2 EQ 'X'. "The date format is like Aprial 31, 2007
CONDENSE temp_date NO-GAPS.
SPLIT date AT ',' INTO daymonth year.
IF STRLEN( year ) NE '4'.
error = 'X'.
WRITE : 'Invalid date format.'.
ELSE.
daymonth1 = daymonth.
CONDENSE daymonth1 NO-GAPS.
_len = STRLEN( _daymonth1 ).
l_len = 13 - len.
SHIFT daymonth1 RIGHT BY len PLACES.
CONDENSE daymonth1 NO-GAPS.
month = daymonth1.
CONDENSE month NO-GAPS.
SORT t_month BY monthltx.
READ TABLE t_month WITH KEY monthltx = month.
IF sy-subrc <> 0.
error = 'X'.
WRITE : 'Invalid date format.' .
ELSE.
len = STRLEN( month ).
CONDENSE daymonth NO-GAPS.
SHIFT daymonth LEFT BY len PLACES.
day = daymonth.
CONDENSE day NO-GAPS.
CONCATENATE year t_month-monthnumber day INTO o_date.
ENDIF.
ENDIF.
ELSEIF p_date3 EQ 'X'. "The date format is like 31 apr, 2007
CONDENSE temp_date NO-GAPS.
SPLIT i_date AT ',' INTO daymonth year.
IF STRLEN( year ) NE '4'.
error = 'X'.
WRITE : 'Invalid date format.'.
ELSE.
daymonth1 = daymonth.
CONDENSE daymonth1 NO-GAPS.
SHIFT daymonth1 LEFT BY 2 PLACES.
CONDENSE daymonth1 NO-GAPS.
month = daymonth1.
CONDENSE month NO-GAPS.
TRANSLATE month TO UPPER CASE.
SORT t_month BY monthstx.
MOVE month to mon.
READ TABLE t_month WITH KEY monthstx = mon.
IF sy-subrc <> 0.
error = 'X'.
WRITE : 'Invalid date format.' .
ELSE.
CONDENSE daymonth NO-GAPS.
day = daymonth+0(2).
CONDENSE day NO-GAPS.
CONCATENATE year t_month-monthnumber day INTO o_date.
ENDIF.
ENDIF.
ELSEIF p_date4 EQ 'X' OR p_date5 EQ 'X'. "Date format is like DD.MM.YYYY or DD/MM/YYYY
CONDENSE temp_date NO-GAPS.
IF STRLEN( temp_date ) EQ 10.
o_date0(4) = temp_date6(4).
o_date4(2) = temp_date3(2).
o_date6(2) = temp_date0(2).
ELSE.
error = 'X'.
WRITE : 'Invalid date format.' .
ENDIF.
ENDIF.
IF STRLEN( o_date ) NE '8'.
error = 'X'.
WRITE : 'Invalid date format.'.
ENDIf.
ENDFORM. " f0100_conv_date
Reward if helpful.
Regards,
Harini.S

How to change the line's color?

In a linechart, if the backgroundColor of
Application is not "#ffffff",there will be some white
horizontal lines in the linechart. how to change the
line's color?? thanks

Hi, I hope this is what you are looking for:
http://blog.flexexamples.com/2007/11/15/customizing-the-horizontal-grid-lines-in-a-flex-li nechart-control/

How to change the asynchronous bpel to synchronous pbel

Hi All,
Let me know how to change the asynchronous bpel to synchronous pbel or synchronous pbel to asynchronous bpel.
thanks in advance..
Hari

HI,
Hi go through this link.
It is explained there with mnute details.
http://suryaveer-chauhan.blogspot.com/2007/06/converting-synchrous-bpel-process-to.html
Thanks
Akshay

How to change the OraSSO login link in webcache/load balance

Hi
we have 10gAsR1 installed as a Portal instance. We have 6-server
load balancer => webcache as loadbalancer (listening port 80)
Wb ch1 and wb ch2 => webcache (listening port 7777)
portal1 and portal2 => Portal listening 7778
infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
Any one know how to chang the URL at load balancer.
I am struck at this point please suggest how should i proceed..
Thanks,

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change the default apex port

hi,
i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
URl: http://hostname:7777/pls/apex
My EBS R12 running on http://hostname:8007.
is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
Before change : http://hostname:7777/pls/apex
After Change : http://hostname:8007/pls/apex
Thanks in advanace....

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

In CRM 2007 WebClient UI - How to change the exit URL?

Similar Messages

Maybe you are looking for