In CS5 bridge with Mac OS10.8.2 jpegs thumbnails now only dislpay as icons

When I open bridge CS5 i see my jpegs thumnails for a second, then they all convert to the jpeg icon and I get this message.
"Could not complete your request because a SOFn, DQT, or DHT JPEG marker is missing before a JPEG SOS marker". 
I try rebuildign the cache then they all conver to the icon. I have thousands of jpegs. How do I corect this?
They do open in the mac preview, but that is useless for lage folder previews.

10.8.2 broke a lot of stuff, report this to Apple.

Similar Messages

  • Does CS5 work with MAC OS10.9 ?

    Does CS5 work with MAC OS10.9 ?

    It may be specific to the applications which you're running. This is probably better asked in the product forums for the products you use.

  • Is CS5 compatible with Mac OS 10.8.5?

    Is CS5 compatible with Mac OS 10.8.5? I am trying to use CS3, but am having a lot of problems with InDesign & Photoshop. Thanks

    Hi djackathens,
    CS3 is not compatible with MAC 10.8.5.
    CS5 though not tested but works on MAC 10.8.5
    You can check the minimum system requirements for CS5 at :
    https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&ved=0CGEQFjAG&url= http%3A%2F%2Fadmin.a-f.ch%2Fmediaserver%2Fapi%2FgetMediadata.cfm%3Fmedia_id%3D377%26mandat or%3Dfw40_mandator_0217&ei=ld-1UuyWBKavygORiYGgCw&usg=AFQjCNGOyo8rZNRO_VFt67O8ABTzjHHbvQ&s ig2=FZLdEwnz6fe2k2vsGhVXtg&bvm=bv.58187178,d.bGQ

  • I'm trying to loack a document with mac os x 10.6.8  They only have infor. on how to lock it with lion 7.0 on the help button.  Can I lock it with snow leopard?

    I'm trying to lock a document with mac os x 10.6.8  I only found infor. on how to lock a document with os x lion 7.0 on the help button.  Can I lock it with 10.6.8 operating system?

    Thank you.  I did what you suggested and it worked. 

  • Using MAC OS10, After running fine, CS3 now crashes on startup

    Using MAC OS10, After running fine, CS3 now crashes on startup

    Which specific OS version?
    And what does the crash report say?

  • Is there an external hard disc that will work with Mac OS10.4.11 and Windows Vista?

    Is there an external hard disc that will work with both Mac (OS10.4.11) and Windows (Vista)?

    For NTFS on Mac, there are both open-source and commercial solutions. See:
    http://www.macupdate.com/find/mac/NTFS
    For HFS+ Drivers for Windows, there is only one:
    http://www.mediafour.com/products/macdrive
    Regards.

  • I am running CS5 on my MAC OS10.6.8 and I want to upgrade my OS to 10.8 or 10.9. Will my CS5 continue to work and do I have to reinstall anythig?

    I am running CS5 on my MAC OS 10.6.8. I want to upgrade my OS to 10.8 or 10.9. Will my CS5 work and do I have to do anything to keep it working when I install the new OS?

    It should upgrade fine.
    Worst case is you'll need to run the Adobe Cleaner Tool (link below), then reinstall from your original discs:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • What copiers are compatible with mac os10.8, what copiers are compatible with mac os10.8

    what copiers are compatable with mac os 10.8

    You need to clear what you want. All in one printer that does printing and scanning? There are many. Look at the HP Envy series.

  • Scanning with Mac OS10.10.1

    Since I've updated to Yosemite I cannot scan on my printer. Can someone familiar with Macs Yosemite tell me how to do that? Just scanning. Everything else is fine and I do NOT want to buy a new printer just for this. I've tried Image Capture and Preview to no avail.
    TIA
    Connie

    I found another similar link that might help out in the short term. There are other software packages that can scan besides the HP scan utility. The following link provides this info. However the first step is to add the printer back to the system. I would be frustratied to to not see hte printer in the list of available devices. 
    Since you've tried unplugging the cable and then reattaching without any success, I would next try powering off the printer completely and then powering it back on after a couple of seconds. I'm not an expert but I believe it should show up in the list of available printers to add in.
    Please try Steps 1, 2, and 3 in the link below. Make sure your OS is fully updated from the Apple App store. If it does not show the HP Printer driver as an option then I believe you are fully updated. Step 2 has you add the printer back in. Step 3 explains the other software packages that can be used to scan from the printer. The key is really going to be getting your printer back on the system. 
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04467713&tmp_task=useCategory&cc=us&dlc=en&lc=e...
    I am an HP Employee

  • Illustrator CS5 compatibility with Mac OS

    Will CS5 run on Mac OS x 10.9.2?

    Oneills,
    From this page it seems not,
    http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-illustrator.html#mai n_Illustrator_CS5_system_requirements
    unless you have an Intel based system, see under CS6.

  • Firefox freezes with Mac OS10.6.7. The menus are also frozen

    I just upgraded my mac to 10.6.7. Now when Firefox freezes all the menus are also frozen. When you click on the apple to force quit it can not be selected.

    I just upgraded my mac to 10.6.7. Now when Firefox freezes all the menus are also frozen. When you click on the apple to force quit it can not be selected.

  • Sync with .mac never seemed to work great, now won't work at all

    sync never seemed to work that well for me, now it won't work at all. I get the following message now:
    .Mac Sync Error
    A failure occurred while synchronizing the .Mac Sync Client.
    I've tried reseting all the .mac stuff, but nothing seems to work now. Its pretty frustrating. Plus, while mac support in the store and over the phone is superb, .mac support online is a joke. Doesn't anyone have any suggestions?

    With the exception of a framework reset, iSync no longer has anything to do with .Mac synchronization, which is instead handled exclusively by .Mac Sync.
    I would start with a search of this forum for the error messages you describe:
    http://discussions.apple.com/forum.jspa?forumID=957
    Some of the same users who answer questions here regarding iSync, also do that there for users of .Mac Sync.

  • Installation errors with CS5.5 on mac os10.9.4

    Hello,
    I just tried installing from CD a recently purchased copy of CS5.5 design and web premium (student teacher). There were errors with the installation. I've gone through the troubleshooting provided for exit code 6 and 7 but I'm still getting the same errors. I also can't find these errors in the troubleshooting or install, launch errors sections. The errors I get are as follows:
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    ERROR: DF024: Unable to preserve original file at "/Library/Application Support/Adobe/Linguistics/5.0/Providers/Proximity/11.00/swd58.ths" Error 0(Seq 408)
    ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 408)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Linguistics CS5: Install failed
    Any help would be wonderful!
    Thanks,
    Amanda

    Hi Amanda,
    You might try copying the installation files from the disc to the desktop and run the install from there or download the installation from here Download CS5.5 products
    If you wanted to make a clean start, uninstall
    Mac HD > Applications > Utilities > Adobe Installers (Mac OS X)
    and use the Cleaner Tool - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    then reinstall
    - Dave

  • Using Windows CS5 license with Mac

    Hello all,
    I recently bought Adobe CS5 Design Premium as a download for my Windows desktop. However, I need to install it on my Macbook so that I can have it "in the field" ... I do a lot of web development, and I need to be able to do it on the go. I figured I could buy the Windows version, install it on the desktop, download the Mac trial, and activate both with the same serial. I even asked Adobe if I could do exactly that, and they said yes as long as they were both mine. When I tried it, the Mac would not accept the serial. Now Adobe Support is saying I need to buy another copy if I want to use it like that. Figures.
    So I assume I just need a new serial for the Mac version as well. Yes, I could use a text editor, download GIMP, buy Coda, or use CrossOver/VMWare/BootCamp, but quite frankly I shouldn't have to and don't want to. CrossOver and VMWare cost money, and BootCamp doesn't give me enough battery life. Honestly I shouldn't have to pay another $2000 for the privilege of using, with slightly more functionality (actually it would be the functionality they advertised, and I wouldn't have bought it had they just said I could not do this ... but I digress), what I've already paid an exorbitant amount of money to have. I will refer to this xkcd comic: http://xkcd.com/488/
    But anyways, does anyone know where and/or how I could get a Mac serial to complement my Windows version? They are both my computers. A full-fledged download link would be nice, too, so that I don't have to mess with the trial version stuff.
    Thanks in advance,
    roadkill

    Adobe sells plaform specific licenses. I'm sorry you got incorrect info from whomever you talked to but if you want to use that Windows license on your MacBook I suggest visiting Newegg.com and buying an OEM version of Windows 7 Home Premium for about $99.
    Install it using Boot Camp and then you can install and activate your CS5 Windows version there.
    Bob

  • CS5.1 with Mac OS X Retina Display

    Hello,
    I recently installed adobe elements CS5.1 onto my Macbook Pro retina display running Mountain Lion.  All of the Adobe programs (Photoshop, Illustrator ect) are blurry and pixelated when I open them.  Can you please let me know of a solution to this problem?  I especially notice it with the fonts dropdown. Thanks!

    This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the proper forum so that it can get proper attention.
    We also have many other forums relating to other Adobe products at: http://forums.adobe.com.

Maybe you are looking for

  • Can not see messages in SXMB_MONI of ECC

    Hi Friends,              Here I am facing some problem with SXMB_MONI of ECC. I am doing an XI upgrade from XI3.0 to PI 7.1. when I am doing my interface upgrade I am unable to see messages in SXMB_MONI of ECC. As ECC is also got upgraded  now BASIS

  • Hiding certain columns in UIX table

    I want to hide certain colums of my UIX table based on VO at runtime depending on context. I know that I can use the rendered property of a column but I believe there is a way to do it without dealing with UIX. The reason is that I have about 30 dyna

  • Urgent: Need help in making report

    Hi, i am making a report in which i have to display the minimum level,maximum level,reorder level and stock level. Plzz tell me which tables should i use ? if there is a material which have 3 values and we have to display these as a sum of values in

  • BlazeDS configuration with coldfusion/java No destination 'testClass' exists in service flex.messaging.services.RemotingService"

    Hi   I have an application which requires interaction with both coldfusion and java.I have taken the configuration files from the blazeDS turnkey project and added it to my application.My application server is  coldfusion  deployed in a weblogic.I wa

  • Need to do invoice verification even PO price is zero due to 3rd party sale

    Dear friends, AR complained he is not be able to do invoice with message " Billing quantity is zero" After diagnosis, I found out it's a third party sales order..followed by Purchase order, becasue materials are free stock, thus PO has no unit cost..