In CS6 InDesign (8.0.1) I tried looking for Folio Overlays panel and it doesn't appear...
In CS6 InDesign (8.0.1) I tried looking for Folio Overlays panel and it doesn't appear. So, I tried to go to Updates under Help menu but the Updates button is deactivated.
Any ideas?
Folio Overlays is available under the 'Window' Menu. If it is not available, download it manually, links are available in the following document: Digital Publishing Suite Help | Installing DPS tools
Similar Messages
-
Just want to make sure it is safe to use public wifi and push notifications for my Hotmail.
I Had the same us issye on iPhone 5s. Started when 7.1 came out in April. Only was to get the mail coming through ysing the mail app was to wipe the phone clean. It only worked agsin fir 36-48 hours. I had to install the Yahoo app to just tell me mail was available. i then manually opened the appke mail app. Apple was so help. My internet provider examined my email. Eventually agter 6 months and other issues starting, my carrier took back the phone and I'm in Samsung. Miss the iPhone but after trying 3 and all had the same issue something was up. Never found the issue. Apples service and quality gas dropped.
-
i have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed.
when double clicking on the image it says unable to open and gives me the option to search the app store.
any help would be much appreciated
AdamWell, first, just make sure it's the Mac version and not the Windows version (which indeed would not run on your Mac). You say "Windows Office" which is why I mention it. I think you probably just mean "Microsoft Office" though.
Next, is this on a disk (DVD), or did you purchase and download it from the Microsoft site?
Matt -
I am trying to "personalize" my cs2 software online download with the serial number from my original boxed cd set and it didn't work. I tried using the download serial number and that doesn't work either. Need help!
I understand that you have also used the download link & serial number from Adobe - CS2 Downloads, if still the CS2 is not working, then please refer to the system requirement for e.g System requirements | Photoshop
The issue can be that the present operating system might not be compatible with the CS2.
Regards
Rajshree -
I just tried to fax information to the number provided for Verizon Corporate Headquarters and it doesn't answer. What is the fax number to Verizon Corporate Headquarters?
How To: Direct Message and JohnB_VZW
-
have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request, an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.
I have this same problem. It's like it is not Authorizing this Mac.
What happens when you try to listen to a preview on the Music Store?
Mine asks me to authorize again and gives me the error exactly as you said above.
What happens when you try to view your account information (in Music Store, click on your account name in the top right corner)?
Mine lets me authorize sucessfully and shows me my account information.
I have emailed iTunes support about this and they replied with a generic answer about Deauthorizing and re-authorizing the computer.
I even tried, to no avail, the tips here...
http://discussions.apple.com/thread.jspa?threadID=471237&tstart=30
If anybody reads all this and has any new info for us, please take the time to post it here!
PowerMac G4 Mac OS X (10.4.6) -
InDesign CC - no folio overlay panel
Newly installed off the cloud, DPS tools should be good, folio overlay panel not showing up anywhere.
i get this message when trying help>updates
-
Facebook app is blocked on "waiting..". I tried to close the app firstly but it doesn't appear on the multitasking. I tried the normal and the hard reset. I tried to move the app in another group with itunes but it is still in "waiting". Any suggestion?
I can't! Tried to deleteit from the iphone and from itunes but the X doesn't appear!
-
How do I authenticate my pc ? I tried looking for the authenticate computer but was unsuccessful.
In the new itunes
Ctrl +B to show the top menu
Store > Authorise this Computer... -
Hi i have tryed looking for my high definition device driver for my acer
Hi i have tryed looking for my high definition device driver for my acer
I have looked on the acar web site and i cant find it at all i am on windows 7 and the updates didn't install it
can some 1 help me find it plz or give me a website to get itYou might want to repost your inquiry to the Acer experts in the
Acer Notebook Support Forum.
Carey Frisch -
Hi! My friend told me that her iPhone 5 has problem and the charger is not charging. I gave her mine, but doesn't worked on her too. After that I tried to charge my iPhone 5 and it doesn't work on my phone too. Have you any idea ?? What to do ??? Thanx !
But of course I'm sure! I went to the local apple store and they replaced my charger ! Thank you!
-
?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I am trying to set up icloud on my new device. However it keeps showing the message - account not verified, check your email. I have looked for email and there is nothing. How do I set this up?
Welcome to the Apple Community.
Put in a request for another verification e-mail to be sent to you.
Start here, change your country if necessary and go to manage your account.
Also check your Mail rules and filtering, the verification mail may be going to a junk folder or even being deleted altogether. You may also wish to contact your mail provider to see if their spam filters are removing the email before it gets to you. -
MacBook
Model Identifier: MacBook5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
I have an i phone 5 s and i am trying to sinc using this computer mac pro and it doesn't sync trying to see if anyone can give me a solution to this..You need minimally Snow Leopard 10.6.8.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Safari status bar disappears. I have tried clicking on show status bar, under the View tab and it will only appear when I move the cursor to the top of the screen. I can not minimize the open page, only full screen or close the browser. Any idea how the rectify this issue?
One enters and exits full-screen with control+command+F keys. This is on the View menu in Safari. Optionally, the green traffic light in your browser title bar, if you roll over it, has the full-screen control it it. While in full-screen mode with Safari, moving your mouse pointer virtually up, and off-screen reveals the Safari title bar again, and you can click the green traffic light to exit full-screen mode.
You can hide/show the status bar by simply typing command+/. This too, is on the Safari View menu. and in 10.10.1 — it works reliably for me.
Maybe you are looking for
-
I use Firefox v10.0.2 as default browser on Dell XPS8300 e/w Intel Core i5 & Windows 7 Ultimate and Compaq Presario CQ57 e/w Intel Core i3 & Windows 7 Home. More frequently on the (about 90% of attempts) than the Dell (50% of attempts) Firefox will n
-
PI 7.1 NetWeaver Adminstrator/STRUST configuration for SSL
We are trying to configure SSL on a PI 7.1 system. My understanding is that you either use the NWA or the ABAP stack STRUST functionality. The problem is, when I try to configure a communication channel to use client authentication, the "SSL client
-
Adobe Reader 9.4-1 cause 100% CPU load on EL40 system
Hi, when starting Adobe reader 9.4-1 on a Enterprise Linux 4 system the cpu load directly goes up to 100% This happens on EL40 update 4, 5 & 8 I´m using gnome. uname -a Linux 2.6.9-89.0.0.0.1.ELsmp #1 SMP Tue May 19 04:23:49 EDT 2009 i686 i686 i386 G
-
CTS+ integration with NWDI in NW 7.01
Hi, all. I read in the release note that in NW 7.01, you can package NWDI activity and transport it using CTS+. For most of the afternoon, I was searching in vain for the procedure on help.sap.com, SDN and service.sap.com. The doc on help.sap.com in
-
Error Code: U44M2P20 when upgrading CS5, with Illustrator CS5 15.02
Recently I got the message to upgrade my Adobe Creative Suite (CS5) Production Premium. However during upgrade three components failed: 1. Extension Manager 5.5 2. Adobe Illustrator CS5 15.0.2 and 3. Pixel Bender 2.5 I got the message to