IN CUSTOMER CONTROL- ALV GRID ,
IN CUSTOMER CONTROL -ALV GRID,
It is possible to have both the hotspot and f4 help.I WANT TO USE BOTH OF THEM AT A TIME. PLZ GIVE ME SOLUTION.
THANKS,
RANI.
hey rani,
ya it is possible just define f4 help and hotspot independently in program itself, in program define search help for which field you want to make searh help and also provide hotspot condition with that field itself ok, if it is helpfull reward.
Similar Messages
-
Dear friends ,
I want to make 'HYPERLINK' action in custom control alv , in my alv one icon is there , when ever I click into that icon ,action will generate in PAI , m nt able to generate this action . please help me out .
Thanks ,
Joy .Hi,
Go trough the [LINK|http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=55249] which has sample example for hyperlink in ALV custom contianer.
Regards,
Shanmugavel Chandrasekaran -
Changing Custom Control / ALV size in program
Hello,
Everytime I need a screen with more than 1 ALV, I do as follows:
1 - I define one custom container for each ALV;
2 - In my program, I create one object of class CL_GUI_CUSTOM_CONTAINER for each ALV;
3 - For each ALV, I create one object of class CL_GUI_ALV_GRID. For each of these objects, I assign one of the parents created in 2;
So far so good - with this technique I can easily have multiple ALV screens, make ALV's dependent on each other, etc.
My problem is as follows:
- I need to change the screen appearence in my program (typically size and position of the ALV's);
- I tried to use the methods of class CL_GUI_CUSTOM_CONTAINER that seem to be appropriate (SET_HEIGHT, SET_LEFT, etc), but nothing seems to happen:
Example:
CALL METHOD gr_ccontainer1->set_height EXPORTING height = 200.
I would appreciate any help,
Regards,
JoaoHi Sandra,
Thank you for the tip about the poins, I'll try to correct that, if it is still possible. About the question, I confess that I didn't test the solution with the splitter. Nevertheless, I decided to close the question - I believe that following the tips I'll get somewhere:-)
In fact, trying to resize the ALVs was just a first step towards the final result that I want: to resize the objects in a (ABAP) screen according to the screen resolution. Because time is short I decided not to continue for now, and I used my normal approach:
- Defining a screen for the worst resolution in the project;
- Designing custom containers (that now I know cannot change in size in runtime);
- Attacching my ALVs to these custom containers;
Regards,
Joã -
Hi,
I have written a program to display the details of customer in ALV Grid. I have also added code to add a hyperlink to the field name - KTOKD of the table KNA1. It would be helpful if anyone could tell me what is wrong with the code. The list is correctly displayed but the hyperlink is not working.
tables kna1.
data: BEGIN OF itkna1 OCCURS 0,
ktokd like kna1-ktokd,
kunnr like kna1-kunnr,
name1 like kna1-name1,
name2 like kna1-name2,
ktokd_hdl type int4,
end of itkna1.
*creating an instance of grid
data it_custom_control_name type scrfname value 'C_C_ALV'.
data it_container type ref to cl_gui_custom_container.
data it_alvgrid type ref to cl_gui_alv_grid.
data it_lyo type lvc_s_layo.
data it_fcat type lvc_t_fcat.
data tmp_fcat like LINE OF it_fcat.
data it_hype type lvc_t_hype.
data tmp_hype type lvc_s_hype.
Selection-screen begin of block Enter_data with frame title text-001.
PARAMETERS pktokd like KNA1-ktokd OBLIGATORY.
SELECT-OPTIONS skunnr FOR KNA1-kunnr.
Selection-screen end of block Enter_data.
SELECT ktokd kunnr name1 name2
FROM kna1 into CORRESPONDING FIELDS OF TABLE itkna1
WHERE ktokd = pktokd AND kunnr IN skunnr.
*prepare field catalog
clear: it_fcat, tmp_fcat.
tmp_fcat-fieldname = 'KTOKD'.
tmp_fcat-ref_table = 'KNA1'.
tmp_fcat-ref_field = 'KTOKD'.
tmp_fcat-col_pos = '1'.
tmp_fcat-web_field = 'ktokd_hdl'.
append tmp_fcat to it_fcat.
tmp_fcat-fieldname = 'KUNNR'.
tmp_fcat-ref_table = 'KNA1'.
tmp_fcat-ref_field = 'KUNNR'.
tmp_fcat-col_pos = '2'.
append tmp_fcat to it_fcat.
tmp_fcat-fieldname = 'NAME1'.
tmp_fcat-ref_table = 'KNA1'.
tmp_fcat-ref_field = 'NAME1'.
tmp_fcat-col_pos = '3'.
append tmp_fcat to it_fcat.
tmp_fcat-fieldname = 'NAME2'.
tmp_fcat-ref_table = 'KNA1'.
tmp_fcat-ref_field = 'NAME2'.
tmp_fcat-col_pos = '4'.
append tmp_fcat to it_fcat.
data: c_lines type I, count type I.
DESCRIBE table itkna1 LINES c_lines.
loop at itkna1.
count = count + 1.
tmp_hype-handle = count.
tmp_hype-href = itkna1-ktokd.
APPEND tmp_hype to it_hype.
itkna1-ktokd_hdl = count.
MODIFY itkna1.
ENDLOOP.
*prepare layout
it_lyo-grid_title = 'Custormer details'.
call screen 200.
module status_0200 OUTPUT.
*creating an instance of container class
CREATE OBJECT it_container
EXPORTING container_name = it_custom_control_name.
*creating an instance of the grid
create OBJECT it_alvgrid
EXPORTING i_parent = it_container.
*displaying the grid
call METHOD it_alvgrid->set_table_for_first_display
EXPORTING
is_layout = it_lyo
it_hyperlink = it_hype
CHANGING
it_outtab = itkna1[]
it_fieldcatalog = it_fcat
EXCEPTIONS
invalid_parameter_combination = 1
others = 2.
ENDMODULE.Try this..
give the field name in CAPITAL LETTERS..
*prepare field catalog
clear: it_fcat, tmp_fcat.
tmp_fcat-fieldname = 'KTOKD'.
tmp_fcat-ref_table = 'KNA1'.
tmp_fcat-ref_field = 'KTOKD'.
tmp_fcat-col_pos = '1'.
tmp_fcat-web_field =<b> 'KTOKD_HDL'.</b>
REGARDS,
SAI RAMESH -
HOW CAN WE USE ALV-CUSTOM CONTROL
Dear Friends,
How can we use the custom control ALV.please provide the sample PPT or material to learn the container ALV.
Thanks &Regards,
Rajkumar.ASAP released document on ALV custom control. Pretty cool stuff..
http://www.saphelpbykevin.com/saphelpbykevin/modules.php?name=Downloads&d_op=getit&lid=10#dl
Edited by: Kevin Nguyen-Tu on May 14, 2008 7:44 PM -
Custom F4 for a field in ALV GRID
I am want to provide a custom f4 fro a field in alv gird
similiar to the functionality of process on value request
on a normal screenHi Kaushik
You can find some information at page 37 of the document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/an easy reference for alv grid control.pdf
*--Serdar -
Hi,
I am working on ALV Grid Control. When the user clicks enter button on the keyboard the event DATA_CHANGED is triggered. I am actually collecting the data entered on the screen in the handler method of this event.
Now, I want the same functionality with the Enter button on the SAP Screen (this button appears next to the Command Box in SAP Screen). Whenever I click the button in the SAP Screen, the DATA_CHANGED is not called.
How can I make the button on the screen work the same way as the Enter button on the keyboard.
This is very urgent requirement. Please help me.
Regards,
VaraHi ,
You are missing OK CODE at your Container Screen(Where you defined the custom Control to populate your ALV grid).
Please define General attribute "OK_CODE" in your screen which you are using for Container(Where you defined the custom Control to populate your ALV GRID)..
In User Command routine:
Case OK_CODE = 'DATA_CHANGED'.
ENDCASE.
Hope this may help you.
Regards,
Lanka -
ALV Display on the Custom Control
Hi Friends,
Iam developing a Module Pool program where I call a ALV grid on a custom control.
I have only one screen in which i have a input field and a custom control.
when I enter a material number in the input field and press ENTER the custom control should be populated with some of the material details. I have written all the logic. But the problem is when i press enter the custom control is not filled but after I press the REFRESH button present by default on the grid, the details are displayed.
What is the problem??
Regards,
Raju...HI,
Use the method <b>REFRESH_TABLE_DISPLAY</b> after filling the new values into <b>it_outtab</b> table. in the PBO flow logic of your Module pool program.
<b>CALL METHOD grid1->refresh_table_display.</b>
Regards, -
Multiple ALV Grid Controls per report - problem with default displ.variant
Hi,
I have a report with few screens called sequentialy. Each one of the screens has implemented own instance of ALV Grid Control within custom container, means:
- screen 100 has container Cont100 and grid control "grid100",
- screen 110 has container Cont110 and grid control "grid110"
- screen 120 has container Cont120 and grid control "grid120"
and so on...
Each one of the grid controls is initialized with own field catalog table, with own layout and variant structure definitions. My problem occurs when the user changes the display variant for some of the grid controls and save the layout variant using "default setting" checkbox. In this case next time the program is started all other grid controls behaves like they don't have their own variant definitions, but uses the default setting of the mentioned screen. This leads (usualy) to unsuable grid controls by default, because usualy different controls have no equal field-definition tables. I have the same behaviour even when there are more than 1 ALV grids on a single screen (for example - 2).
For now I don't provide variant variables at selection screen, but it seems there is no way to provide such variables for each one of the grid-controls.
Is anyone aware how to control this? Means no matter if there is default setting in use for some of the grid-controls, how to manipulate other grid-controls not to use this default setting?
Many thanks in advance.
Regards,
Ivaylo Mutafchievcheck this sample code which displays 4 grids in 4 different tabs and with 4 different handles
PROGRAM sapmzsdpp MESSAGE-ID z1.
Table Declarations *
TABLES:
vbpa, " Sales Document: Partner
kna1, " Customer Master
vbap. " Sales Document: Item Data
Tab Strip Declarations *
CONTROLS:
tabstrip_sdpp TYPE TABSTRIP. " Tabstrip
Constants declarations *
CONSTANTS:
c_rep_zm(2) TYPE c VALUE 'ZM', " Outside Sales Representative
c_rep_ve(2) TYPE c VALUE 'VE', " Inside Sales Representative
c_rep_zi(2) TYPE c VALUE 'ZI', " Sales Manager
c_abgru_08(2) TYPE c VALUE '08', " Reason for Rej: SO Not Closed
c_stock_ind_e TYPE c VALUE 'E', " Stock Idctr : Orders on hand
c_gauge(5) TYPE c VALUE 'GAUGE', " Characteristic Name - GAUGE
c_width(5) TYPE c VALUE 'WIDTH', " Characteristic Name - WIDTH
c_gauge_metric(12) " Character Name - GAUGE_METRIC
TYPE c VALUE 'GAUGE_METRIC',
c_width_metric(12) " Character Name - WIDTH_METRIC
TYPE c VALUE 'WIDTH_METRIC',
c_eng_metric(14) " Charac Value - ENGLISH_METRIC
TYPE c VALUE 'ENGLISH_METRIC',
c_coil(4) TYPE c VALUE 'COIL', " For Value COIL
c_spec_bf(7) TYPE c VALUE 'SPEC_BF'," Charac value SPEC_BF
c_wadat_ist(8) " Actual Goods Movement Date
TYPE c VALUE '00000000',
c_mcha(4) TYPE c VALUE 'MCHA', " Database Table 'MCHA'
c_classtype_022(3)
TYPE c VALUE '022', " Class Type : BATCH
c_pipe(2) TYPE c VALUE '06', " Material Pricing Group: Pipes
c_item_ctgry_ztam(4)
TYPE c VALUE 'ZTAM', " Item Cat:Certificate Mnfctr
c_lab_result(10) " Charac Value LAB_RESULT
TYPE n VALUE '0000001392',
c_none_reqd(10) " For Value NONE REQD
TYPE c VALUE 'NONE REQD.',
c_passed(6) TYPE c VALUE 'PASSED', " For Value PASSED
c_pending(12) TYPE c " For Value TEST PENDING
VALUE 'TEST PENDING',
c_bundling(13) " For Value TEST BUNDLING
TYPE c VALUE 'TEST BUNDLING',
c_normal(2) TYPE c VALUE '01'. " Priority: Normal
Internal Table Declarations *
DATA :
Internal table to hold common data for all reports
BEGIN OF t_common_data OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
vbeln LIKE vbap-vbeln, " Sales Document Number
posnr LIKE vbap-posnr, " Sales Document Item Number
ihrez_e LIKE vbkd-ihrez_e, " Mill Order Number
matnr LIKE vbap-matnr, " Material Number
pstyv LIKE vbap-pstyv, " Sales Document Item Category
kwmeng LIKE vbap-kwmeng, " Cumulative Order Quantity
lprio LIKE vbap-lprio, " Delivery Priority
werks LIKE vbap-werks, " Plant
kondm LIKE vbap-kondm, " Material Pricing Group
aedat LIKE vbap-aedat, " Date of Last Change
cuobj LIKE vbap-cuobj, " Configuration
saldata LIKE vbap-zzcust_req_avail,
" Required Availability Date
END OF t_common_data,
Internal table to hold Customer Number
BEGIN OF t_cust_temp OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
END OF t_cust_temp,
Internal table to hold stock details
BEGIN OF t_stock OCCURS 0,
vbeln LIKE mska-vbeln, " Sales Document Number
posnr LIKE mska-posnr, " Sales Document Item Number
matnr LIKE mska-matnr, " Material Number
werks LIKE mska-werks, " Plant
charg LIKE mska-charg, " Batch Number
kalab LIKE mska-kalab, " Valuated Stock
ersda LIKE mska-ersda,
END OF t_stock,
Internal table to hold deliveries
BEGIN OF t_delivery_data OCCURS 0,
vbeln LIKE lips-vbeln, " Delivery Document Number
vgbel LIKE lips-vgbel, " Document No of Ref Document
vgpos LIKE lips-vgpos, " Item No of Ref Item
END OF t_delivery_data,
Internal table to hold released tons & released days
BEGIN OF t_released_tons_days OCCURS 0,
vbeln LIKE likp-vbeln, " Delivery Document Number
btgew LIKE likp-btgew, " Total Weight
bldat LIKE likp-bldat, " Document Date in Document
END OF t_released_tons_days,
Internal table to hold Pre-Production-Pending Orders (Report-1)
BEGIN OF t_pre_prod_ord OCCURS 0,
sortl1 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e1 LIKE vbkd-ihrez_e, " Mill Order Number
salord1(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
days_entry LIKE zlgcyinfo-days_since_entry,
" Days Since Entry
dept LIKE zlgcyinfo-bklog, " Department
notes1 LIKE zcsimemo-text, " CSI File Memo Text
*/ Request No. DV2K904687
chng_date LIKE vbap-aedat, " Date of Last Change
END OF t_pre_prod_ord,
Internal table to hold Delinquent Orders (Report-2)
BEGIN OF t_delinquent_ord OCCURS 0,
sortl2 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e2 LIKE vbkd-ihrez_e, " Mill Order Number
salord2(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
schdate LIKE vbep-edatu, " Schedule Line Date
days_late LIKE zlgcyinfo-dayslate,
" Days Late
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
days_at_unit LIKE zlgcyinfo-daysatunit,
notes2 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_delinquent_ord,
Internal table to hold Processed Material Orders (Report-3)
BEGIN OF t_processed_ord OCCURS 0,
sortl3 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e3 LIKE vbkd-ihrez_e, " Mill Order Number
salord3(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
order_tons LIKE vbap-kwmeng, " Cumulative Order Quantity
fin_tons LIKE mska-kalab, " Val.Stock With Unres Usage
fin_days TYPE i, " Finished Days
rel_tons LIKE likp-btgew, " Total Weight
rel_days TYPE i, " No.of.Days Order is Released
status(15) TYPE c, " Status Of Stock
tb_tons LIKE zlgcyinfo-tons, " Tons
notes3 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_processed_ord,
Internal table to hold Flagged Orders (Report-4)
BEGIN OF t_flagged_ord OCCURS 0,
sortl4 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e4 LIKE vbkd-ihrez_e, " Mill Order Number
salord4(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
tons LIKE zlgcyinfo-tons, " Tons
priority LIKE vbap-lprio, " Delivery Priority
notes4 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_flagged_ord,
Internal table to hold CSI memo file data
BEGIN OF t_csi_memo_data OCCURS 0,
vbeln LIKE zcsimemo-vbeln, " Sales Document Number
posnr LIKE zcsimemo-posnr, " Sales Order line item
text LIKE zcsimemo-text, " CSI File Memo Text
END OF t_csi_memo_data,
Internal table to hold Customer Codes
BEGIN OF t_customer_code OCCURS 0,
sortl LIKE zcustcode-sortl, " Sort Field
kunnr LIKE zcustcode-kunnr, " Customer Number
END OF t_customer_code,
Internal table to hold schedule line dates
BEGIN OF t_schedule_line_date OCCURS 0,
vbeln LIKE vbep-vbeln, " Sales Document Number
posnr LIKE vbep-posnr, " Sales Document Item Number
edatu LIKE vbep-edatu, " Schedule line date
END OF t_schedule_line_date,
Internal table to hold Characteristic values
t_configuration
TYPE TABLE OF conf_out
WITH HEADER LINE,
Internal tables to hold legacy data
t_lgcyinfo TYPE TABLE OF zlgcyinfo
WITH HEADER LINE.
Work variables declarations *
DATA:
gv_parvw LIKE kupav-parvw, " Partner function
gv_abgru LIKE vbap-abgru, " Reason to eject sales order
gv_gauge LIKE conf_out-atwtb, " Charac Value Description
gv_width LIKE conf_out-atwtb, " Charac Value Description
gv_ok_code LIKE sy-ucomm, " Usercommand
gv_okcode LIKE sy-ucomm, " User Command
gv_number LIKE sy-dynnr
VALUE '0101', " Initial Sub Screen Number
gv_vbeln LIKE vbak-vbeln, " Sales Order
gv_posnr LIKE vbup-posnr, " Sales Item
*/ Request No. DV2K904687
gv_del_prio LIKE vbap-lprio, " Delivery Priority
gv_obj_key LIKE inob-objek, " Object Key
gv_config LIKE inob-cuobj, " Configuration
gv_lab_result LIKE ausp-atwrt, " Lab Result Value
gv_pass_stock LIKE mska-kalab, " Finished Stock
gv_fail_stock LIKE mska-kalab, " Failed Stock
gv_tp_tons LIKE mska-kalab, " Test Pending Tons
gv_csi_stock LIKE mbew-lbkum, " CSI Stock On Hand
gv_val_stock LIKE mska-kalab, " Valuated Stock
gv_fin_tons LIKE mska-kalab, " Finished Tons
gv_fin_days TYPE i, " Finished Days
gv_rel_tons LIKE likp-btgew, " Released Tons
gv_rel_days TYPE i, " Released Days
gv_no_delivery " Number of Delivery Documents
TYPE i,
gv_bund_tons LIKE zlgcyinfo-tons, " Bundling Tons
gv_net_weight LIKE mara-ntgew, " Net Weight
gv_tb_tons LIKE zlgcyinfo-tons, " Test/Bundling Tons
gv_date LIKE mska-ersda, " Date
gv_tabix LIKE sy-tabix, " Table Index
gv_flg TYPE c, " Flag Variable
gv_exit TYPE c. " For Parameter Exit
Constant declarations for ALV Grid *
CONSTANTS:
c_cont_pre_prod_ord
TYPE scrfname VALUE 'CUST_PPP',
" Custom Container for Report-1
c_cont_delinquent_ord
TYPE scrfname VALUE 'CUST_DIP',
" Custom Container for Report-2
c_cont_processed_ord
TYPE scrfname VALUE 'CUST_PMS',
" Custom Container for Report-3
c_cont_flagged_ord
TYPE scrfname VALUE 'CUST_FLGORD',
" Custom Container for Report-4
c_handle1(3) TYPE c VALUE 'G_1', " Handle for PPP rpt Grid
c_handle2(3) TYPE c VALUE 'G_2', " Handle for DIP rpt Grid
c_handle3(3) TYPE c VALUE 'G_3', " Handle for PMS rpt Grid
c_handle4(3) TYPE c VALUE 'G_4', " Handle for FLGORD rpt Grid
c_true TYPE c VALUE 'X', " For value 'X'
c_save TYPE c VALUE 'A'. " User-Defd & Global Variants
Selection Screen *
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-014.
PARAMETERS :
p_osr RADIOBUTTON GROUP g1
DEFAULT 'X', " Outside Sales Representative
p_isr RADIOBUTTON GROUP g1, " Inside Sales Representative
p_s_mgr RADIOBUTTON GROUP g1. " Sales Manager
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-005.
SELECT-OPTIONS:
s_pernr FOR vbpa-pernr
OBLIGATORY, " Employee Number
s_kunnr FOR kna1-kunnr, " Customer Number
s_sortl FOR kna1-sortl, " Customer Search Term
s_kondm FOR vbap-kondm. " Material Pricing Group
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-006.
PARAMETERS:
p_open RADIOBUTTON GROUP g2
DEFAULT 'X', " Open Orders
p_closed RADIOBUTTON GROUP g2. " Closed Orders
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-007.
PARAMETERS:
p_var1 LIKE disvariant-variant, " Variant For Report-1
p_var2 LIKE disvariant-variant, " Variant For Report-2
p_var3 LIKE disvariant-variant, " Variant For Report-3
p_var4 LIKE disvariant-variant. " Varinat For Report-3
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF SCREEN 500.
*/ Begin of Modification - Request No. DV2K904687
Selection Screen for Changing Sales Order Priority
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b5 WITH FRAME TITLE text-044.
PARAMETERS p_sonum LIKE vbap-vbeln." Sales Order Number
SELECT-OPTIONS s_item FOR vbap-posnr." Sales Order Item
PARAMETERS p_delpr LIKE vbap-lprio." Delivery Priority
SELECTION-SCREEN END OF BLOCK b5.
SELECTION-SCREEN END OF SCREEN 1100.
*/ End of Modification - Request No. DV2K904687
CLASS lcl_gv_event_receiveriver DEFINITION *
CLASS lcl_event_receiver DEFINITION DEFERRED.
ALV Grid - Work Variables Declarations *
DATA:
gv_cont_pre_prod_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-1
gv_cont_delinquent_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-2
gv_cont_processed_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-3
gv_cont_flagged_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-4
gv_grid_pre_prod_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-1
gv_grid_delinquent_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-2
gv_grid_processed_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-3
gv_grid_flagged_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-4
gv_event_receiver TYPE REF
TO lcl_event_receiver,
" Object For Local Class
gs_lay_pre_prod_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_delinquent_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_processed_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_flagged_ord TYPE lvc_s_layo,
" Work Area for Grid Layout
gs_var_pre_prod_ord TYPE disvariant,
" Layout Structure
gs_var_delinquent_ord TYPE disvariant,
" Layout Structure
gs_var_processed_ord TYPE disvariant,
" Layout Structure
gs_var_flagged_ord TYPE disvariant,
" Layout Structure
t_fcat_pre_prod_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-1
t_fcat_delinquent_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-2
t_fcat_processed_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-3
t_fcat_flagged_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-4
t_exclude TYPE ui_functions,
" Function Code Table
gs_exclude TYPE ui_func. " Function Code Structure
CLASS lcl_gv_event_receiver DEFINITION *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_top_of_page
FOR EVENT print_top_of_page OF cl_gui_alv_grid,
*/ Begin of Modification - Request No. DV2K904687
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER DEFINITION
CLASS IMPLEMENTATION *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_hotspot.
CASE e_column_id-fieldname.
WHEN 'SALORD1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_pre_prod_ord-salord1.
WHEN 'SALORD2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_delinquent_ord-salord2.
WHEN 'SALORD3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_processed_ord-salord3.
WHEN 'SALORD4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_flagged_ord-salord4.
WHEN 'SORTL1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_pre_prod_ord-sortl1.
WHEN 'SORTL2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_delinquent_ord-sortl2.
WHEN 'SORTL3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_processed_ord-sortl3.
WHEN 'SORTL4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_flagged_ord-sortl4.
WHEN 'IHREZ_E1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_pre_prod_ord-ihrez_e1.
WHEN 'IHREZ_E2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_delinquent_ord-ihrez_e2.
WHEN 'IHREZ_E3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_processed_ord-ihrez_e3.
WHEN 'IHREZ_E4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_flagged_ord-ihrez_e4.
WHEN 'NOTES1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_pre_prod_ord-salord1.
WHEN 'NOTES2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_delinquent_ord-salord2.
WHEN 'NOTES3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_processed_ord-salord3.
WHEN 'NOTES4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_flagged_ord-salord4.
ENDCASE. " CASE E_COLUMN_ID ...
ENDMETHOD. " HANDLE_HOTSPOT
METHOD handle_top_of_page.
PERFORM write_report_header.
ENDMETHOD. " METHOD HANDLE_TOP_OF_PAGE
*/ Begin of Modification - Request No. DV2K904687
METHOD handle_toolbar.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
append a button for Change Delivery Priority
MOVE 'CHNG_PRIO' TO ls_toolbar-function.
MOVE 'Change SO Delivery Priority'(048)
TO ls_toolbar-quickinfo.
MOVE 'Change SO Priority'(049) TO ls_toolbar-text.
MOVE 0 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " handle_toolbar
METHOD handle_user_command.
DATA: t_sel_row TYPE lvc_t_roid,
gs_sel_row TYPE lvc_s_roid,
gs_flagged_ord LIKE t_flagged_ord,
lv_lines TYPE i.
CASE e_ucomm.
WHEN 'CHNG_PRIO'.
REFRESH t_sel_row.
CLEAR e_ucomm.
CALL METHOD gv_grid_flagged_ord->get_selected_rows
IMPORTING
et_row_no = t_sel_row.
CLEAR: t_flagged_ord,
gv_vbeln,
gv_posnr,
gv_del_prio.
DESCRIBE TABLE t_sel_row LINES lv_lines.
IF lv_lines GT 1.
MESSAGE i001 WITH 'Select only one row'(043).
ELSEIF lv_lines EQ 1.
READ TABLE t_sel_row INTO gs_sel_row INDEX 1.
READ TABLE t_flagged_ord INTO gs_flagged_ord
INDEX gs_sel_row-row_id.
IF sy-subrc EQ 0.
SPLIT gs_flagged_ord-salord4 AT '-' INTO gv_vbeln gv_posnr.
gv_del_prio = gs_flagged_ord-priority.
CLEAR: s_item, s_item[].
p_sonum = gv_vbeln.
p_delpr = gv_del_prio.
s_item-low = gv_posnr.
APPEND s_item TO s_item.
CLEAR s_item.
ENDIF. " IF sy-subrc EQ 0
ENDIF. " IF lv_lines GT 1
IF lv_lines LE 1.
CALL SELECTION-SCREEN '1100' STARTING AT 30 2
ENDING AT 110 7.
LEAVE TO SCREEN 100.
ENDIF.
ENDCASE. " CASE e_ucomm
ENDMETHOD. " handle_user_command
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER
" IMPLEMENTATION
Form WRITE_REPORT_HEADER *
This subroutine displays Report Header which includes *
Report Name, Executed by, Execution date, Execution Time *
There are no parameters to be passed to this subroutine *
FORM write_report_header.
DATA lv_rep_tit(72) TYPE c.
FORMAT COLOR COL_KEY.
MOVE sy-title TO lv_rep_tit.
CONDENSE lv_rep_tit.
SKIP 1.
WRITE: /3 sy-repid,
25 'California Steel Industries, Inc.'(040),
75 'Page'(041),
80(4) sy-pagno.
WRITE: /3 sy-uzeit,
25 lv_rep_tit,
75 sy-datum.
FORMAT RESET.
ENDFORM. " WRITE_REPORT_HEADER
At selection-output *
AT SELECTION-SCREEN OUTPUT.
CLEAR sy-ucomm.
IF sy-dynnr EQ '0500'.
Initialize layout variant for report-1
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM initialize_layoutvariant CHANGING gs_var_pre_prod_ord.
p_var1 = gs_var_pre_prod_ord-variant.
Initialize layout variant for report-2
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM initialize_layoutvariant CHANGING gs_var_delinquent_ord.
p_var2 = gs_var_delinquent_ord-variant.
Initialize layout variant for report-3
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM initialize_layoutvariant CHANGING gs_var_processed_ord.
p_var3 = gs_var_processed_ord-variant.
Initialize layout variant for report-4
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM initialize_layoutvariant CHANGING gs_var_flagged_ord.
p_var4 = gs_var_flagged_ord-variant.
*/ Begin of Modification - Request No. DV2K904687
ELSEIF sy-dynnr EQ '1100'.
DATA t_exclude TYPE TABLE OF sy-ucomm.
SET PF-STATUS 'MENU_1100'.
To use your own GUI status for a selection screen
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = 'MENU_1100'
TABLES
p_exclude = t_exclude.
ENDIF. " IF sy-dynnr EQ '0500'
*/ End of Modification - Request No. DV2K904687
At Selection Screen *
AT SELECTION-SCREEN.
*/ Begin of Modification - Request No. DV2K904687
CASE sy-dynnr.
WHEN '1100'.
IF sy-ucomm IS INITIAL.
CLEAR sy-ucomm.
LEAVE TO SCREEN 1100.
ENDIF. " IF sy-ucomm IS INITIAL
CASE sy-ucomm.
WHEN 'SAVE'.
CLEAR sy-ucomm.
Change Delivery Priority using BAPI method
PERFORM change_del_priority.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
ENDCASE. " CASE sy-ucomm
WHEN '0500'.
IF sy-ucomm EQ 'CRET'.
LEAVE TO SCREEN 100.
ELSEIF sy-ucomm IS INITIAL.
LEAVE TO SCREEN 500.
ENDIF. " IF SY-UCOMM EQ 'CRET'
ENDCASE. " CASE sy-dynnr
*/ End of Modification - Request No. DV2K904687
Selection Screen: Validations *
AT SELECTION-SCREEN ON s_pernr.
Validate Employee Number
PERFORM validate_employee_number.
AT SELECTION-SCREEN ON s_kunnr.
Validate Customer Number
IF NOT s_kunnr IS INITIAL.
PERFORM validate_customer_number.
ENDIF. " IF NOT S_KUNNR IS INITIAL
AT SELECTION-SCREEN ON s_sortl.
Validate Search Term
IF NOT s_sortl IS INITIAL.
PERFORM validate_search_term.
ENDIF. " IF NOT S_SORTL IS INITIAL
AT SELECTION-SCREEN ON s_kondm.
Validate Product
IF NOT s_kondm IS INITIAL.
PERFORM validate_product.
ENDIF. " IF NOT S_KONDM IS INITIAL
Validate p_var1
AT SELECTION-SCREEN ON p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
gs_var_pre_prod_ord-variant = p_var1.
IF p_var1 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_pre_prod_ord.
ENDIF. " IF P_VAR1 IS NOT INITIAL
Validate p_var2
AT SELECTION-SCREEN ON p_var2.
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
gs_var_delinquent_ord-variant = p_var2.
IF p_var2 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_delinquent_ord.
ENDIF. " IF P_VAR2 IS NOT INITIAL
Validate p_var3
AT SELECTION-SCREEN ON p_var3.
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
gs_var_processed_ord-variant = p_var3.
IF p_var3 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_processed_ord.
ENDIF. " IF P_VAR3 IS NOT INITIAL
Validate p_var4
AT SELECTION-SCREEN ON p_var4.
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
gs_var_flagged_ord-variant = p_var4.
IF p_var4 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_flagged_ord.
ENDIF. " IF P_VAR4 IS NOT INITIAL
Selection Screen: Value Request for ALV GRID Variants *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM f4_variant CHANGING gs_var_pre_prod_ord
gv_exit.
IF gv_exit NE c_true.
p_var1 = gs_var_pre_prod_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var2
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var2.
CLEAR:
gs_var_delinquent_ord,
gv_exit.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM f4_variant CHANGING gs_var_delinquent_ord
gv_exit.
IF gv_exit NE c_true.
p_var2 = gs_var_delinquent_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var3
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var3.
CLEAR:
gs_var_processed_ord,
gv_exit.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM f4_variant CHANGING gs_var_processed_ord
gv_exit.
IF gv_exit NE c_true.
p_var3 = gs_var_processed_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var4
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var4.
CLEAR:
gs_var_flagged_ord,
gv_exit.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM f4_variant CHANGING gs_var_flagged_ord
gv_exit.
IF gv_exit NE c_true.
p_var4 = gs_var_flagged_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
Form validate_employee_number *
This subroutine validates Employee Number *
There are no parameters to need be passed to this subroutine *
FORM validate_employee_number.
DATA lv_pernr LIKE vbpa-pernr.
SELECT SINGLE pernr
INTO lv_pernr
FROM vbpa
WHERE pernr IN s_pernr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-010.
ENDIF. " IF SY-SUBRC NE 0
CLEAR lv_pernr.
ENDFORM. " VALIDATE_EMPLOYEE_NUMBER
Form validate_customer_number *
This subroutine validates Customer Number *
There are no parameters need to be passed to this subroutine *
FORM validate_customer_number.
SELECT SINGLE kunnr
INTO t_common_data-kunnr
FROM kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-011.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_common_data-kunnr.
ENDFORM. " VALIDATE_CUSTOMER_NUMBER
Form validate_search_term *
This subroutine validates Search Term *
There are no parameters need to be passed to this subroutine *
FORM validate_search_term.
SELECT SINGLE sortl
INTO t_customer_code-sortl
FROM kna1
WHERE sortl IN s_sortl.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-012.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_customer_code-sortl.
ENDFORM. " VALIDATE_SEARCH_TERM
Form validate_product *
This subroutine validates Product *
There are no parameters need to be passed to this subroutine *
FORM validate_product.
SELECT SINGLE kondm
INTO t_ -
Control Framework: Fatal error - GUI cannot be reached-ALV Grid in Bckgrnd
I have an ALV grid which dumps in the background. But works fine in the foreground.
I thought I am not using Control framework anywhere. But I get 'COntrol framework :Fatal error - GU cannot be reached' error.
I am using a docking container that I have split using a splitter.
I have no custom container in my screen. What else could be causing the Control framework error ? Any suggestions is appreciated. But please do not tell me to use 'REUSE_ALV*' or Classical reporting
Here are the PBO modules of my screen and here are my data declarations.
ALV Data declarations :
data :gt_sort type lvc_t_sort,
gr_event_handler TYPE REF TO lcl_event_handler ,
o_docking type ref to cl_gui_docking_container,"Docking Container
o_grid type ref to cl_gui_alv_grid,"Grid
o_split type ref to cl_gui_easy_splitter_container,"Splitter
o_top_container type ref to cl_gui_container, "Top Container
o_bottom_container type ref to cl_gui_container,"Bottom Container
o_document type ref to cl_dd_document. "Document
module status_0100 output.
if o_docking is initial.
set pf-status 'ZSTATUS_0100'.
set titlebar 'ZTITLE_0100'.
Creating Objects
perform create_objects.
Filling top of page
perform fill_top_of_page.
Filling the fieldcatalog table
perform build_fieldcat. "we already got'em
Displaying the output
perform display_output.
endif.
Here is the Form Create_objects called in the PBO.
form create_objects .
Creating Docking Container
CREATE OBJECT o_docking
EXPORTING
RATIO = '95'.
IF sy-subrc eq 0.
Splitting the Docking container
CREATE OBJECT o_split
EXPORTING
PARENT = o_docking
sash_position = 25 "Position of Splitter Bar (in Percent)
with_border = 0. "With Border = 1 Without Border = 0
Placing the containers in the splitter
o_top_container = o_split->top_left_container .
o_bottom_container = o_split->bottom_right_container .
Creating Grid
CREATE OBJECT o_grid
EXPORTING
i_parent = o_bottom_container.
Creating the document
CREATE OBJECT o_document
EXPORTING
style = 'ALV_GRID'.
CREATE OBJECT gr_event_handler .
ENDIF.
endform. " create_objects
form fill_top_of_page .
data : lv_char(255) type c.
Calling the methods for dynamic text
CALL METHOD o_document->add_gap
EXPORTING
width = 140.
CALL METHOD o_document->add_text
EXPORTING
text = 'Plant Attainment Report '
sap_fontsize = 'Large'
sap_color = cl_dd_area=>list_key_int
sap_emphasis = cl_dd_area=>strong. " For bold
Display the data
CALL METHOD o_document->display_document
EXPORTING
parent = o_top_container.
Calling the method of ALV to process top of page
CALL METHOD o_grid->list_processing_events
EXPORTING
i_event_name = 'TOP_OF_PAGE'
i_dyndoc_id = o_document.
endform. " fill_top_of_page
form display_output .
gx_variant-report = sy-repid.
gs_layout-zebra = 'X'.
gs_layout-sel_mode ='X'.
gs_layout-cwidth_opt = 'X'.
call method o_grid->set_table_for_first_display
exporting
is_variant = gx_variant
i_save = 'A'
is_layout = gs_layout
changing
it_fieldcatalog = it_fldcat
it_outtab = <gt_tabletotal>.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SET HANDLER gr_event_handler->handle_print_top_of_page FOR o_grid .
endform. " display_output
Edited by: Shareen Hegde on Jul 23, 2009 5:03 PM (I have no clue why
.. doesn't work anymore. My code looks messed up..Sorry folks!Nilesh,
If i put all these create objects inside the IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL. ENDIF , will I be still able to use ,
call method o_grid->set_table_for_first_display
exporting
is_variant = gx_variant
i_save = 'A'
is_layout = gs_layout
changing
it_fieldcatalog = it_fldcat
it_outtab = <gt_tabletotal>.
in background ? WIll I not get - OBJECTS_OBJREF_NOT_ASSIGNED erorr ?
How can I call the set_table_for_first_display without creating the object reference ?
Here is my creat object routine.
form create_objects .
* Creating Docking Container
IF CL_GUI_ALV_GRID=>OFFLINE( ) .
CREATE OBJECT o_docking
EXPORTING
RATIO = '95'.
IF sy-subrc eq 0.
* Splitting the Docking container
CREATE OBJECT o_split
EXPORTING
PARENT = o_docking
sash_position = 25 "Position of Splitter Bar (in Percent)
with_border = 0. "With Border = 1 Without Border = 0
* Placing the containers in the splitter
o_top_container = o_split->top_left_container .
o_bottom_container = o_split->bottom_right_container .
* Creating Grid
CREATE OBJECT o_grid
EXPORTING
i_parent = o_bottom_container.
* Creating the document
CREATE OBJECT o_document
EXPORTING
style = 'ALV_GRID'.
ENDIF.
CREATE OBJECT gr_event_handler .
endif.
endform. " create_objects -
Hi Experts,
I have a ALV grid. I have added some custom buttons to it.
I want to change dynamically enable of disable some of the buttons in the ALV.
Please help me through.
I tried free, clear refresh for the grid object, control object and the event handler objects also.
still I get the old buttons when i execute the program.
Thanks.Hi,
class lcl_event_receiver implementation.
method handle_toolbar.
IF OK_CODE EQ 'XYZ'.
* append an icon to show booking table
clear ls_toolbar.
move 'BOOKINGS' to ls_toolbar-function.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Detail'(112) to ls_toolbar-text.
move ' ' to ls_toolbar-disabled. " Enable
append ls_toolbar to e_object->mt_toolbar.
clear ls_toolbar.
move 'FILGHT' to ls_toolbar-function.
move 'Show Flight'(113) to ls_toolbar-quickinfo.
move 'FlightDetail'(114) to ls_toolbar-text.
move 'X' to ls_toolbar-disabled. " Disable
append ls_toolbar to e_object->mt_toolbar.
ELSE.
* append an icon to show booking table
clear ls_toolbar.
move 'BOOKINGS' to ls_toolbar-function.
move 'Show Bookings'(111) to ls_toolbar-quickinfo.
move 'Detail'(112) to ls_toolbar-text.
move 'X' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
* append an icon to show booking table
clear ls_toolbar.
move 'FILGHT' to ls_toolbar-function.
move 'Show Flight'(113) to ls_toolbar-quickinfo.
move 'FlightDetail'(114) to ls_toolbar-text.
move ' ' to ls_toolbar-disabled.
append ls_toolbar to e_object->mt_toolbar.
ENDIF.
endmethod.
Endclass.
call method grid1->set_table_for_first_display
exporting i_structure_name = 'SFLIGHT'
is_layout = gs_layout
changing it_outtab = gt_sflight.
create object event_receiver.
set handler event_receiver->handle_user_command for grid1.
set handler event_receiver->handle_toolbar for grid1.
call method grid1->set_toolbar_interactive.
call method sender->refresh_table_display.
set handler event_receiver->handle_toolbar for grid1.
call method grid1->set_toolbar_interactive -
Problem in handling double click in the second alv grid control
Hi all,
I have a screen. In the screen , I have 2 custom container and each custom container has 1 alv grid control.
I need to handle double click event for both of alv grid controls in my screen.
I defined 2 local event handler class for each alv grid and defined 2 handle_double_click event.
In the first Alv grid double click works fine , everything is ok, world is peaceful.
But in the second alvgrid, the row parameters (E_ROW, E_COLUMN, ES_ROW_NO) comes initial so i cannot handle it.
All i need is to call a different transaction (displaying the equipment-IE03) when user double-click on a field in the second alv grid control. I tried to use hotspot_click event too but it does'nt give the row id either.
I read some posts in the forms ([Double click event of alv grid control|Double click event of alv grid control]).
I tried everything but nothing works.
Please help. Your answers will be appreciated.Hello Eagle
I am not sure where the problem lies in your case but sample report ZUS_SDN_THREE_ALV_GRIDS_01 shows that you can always find out the current cell after the double-click event (in any case you have the current cell already as IMPORTING parameters of the event):
*& Report ZUS_SDN_THREE_ALV_GRIDS_01
*& Flow logic of screen '0100' (no screen elements, ok-code => GD_OKCODE):
** PROCESS BEFORE OUTPUT.
** MODULE STATUS_0100.
** PROCESS AFTER INPUT.
** MODULE USER_COMMAND_0100.
*& Thread: problem in handling double click in the second alv grid control
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1172052"></a>
REPORT zus_sdn_three_alv_grids_01.
DATA:
gd_okcode TYPE ui_func,
gd_repid TYPE syst-repid,
go_docking TYPE REF TO cl_gui_docking_container,
go_splitter TYPE REF TO cl_gui_splitter_container,
go_splitter_2 TYPE REF TO cl_gui_splitter_container,
go_cell_top TYPE REF TO cl_gui_container,
go_cell_bottom TYPE REF TO cl_gui_container,
go_cell_left TYPE REF TO cl_gui_container,
go_cell_right TYPE REF TO cl_gui_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid,
go_grid3 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_outtab TYPE STANDARD TABLE OF vbak,
gt_outtab_2 TYPE STANDARD TABLE OF vbap,
gt_outtab_3 TYPE STANDARD TABLE OF vbep.
**PARAMETERS:
** p_bukrs TYPE bukrs DEFAULT '1000'.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
ms_row TYPE lvc_s_row,
ms_col TYPE lvc_s_col.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_outtab TYPE vbak,
ls_outtab_2 TYPE vbap,
ls_outtab_3 TYPE vbep.
" Initialize class data
CLEAR: ms_row,
ms_col.
CASE sender.
WHEN go_grid1.
ms_row = e_row.
ms_col = e_column.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'GET_ITEMS'
* IMPORTING
* rc =
WHEN go_grid2.
ms_row = e_row.
ms_col = e_column.
* Triggers PAI of the dynpro with the specified ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'GET_SCHEDULE_LINES'
* IMPORTING
* rc =
WHEN go_grid3.
** READ TABLE gt_vbap INTO ls_vbap INDEX e_row-index.
** CHECK ( ls_vbap-matnr IS NOT INITIAL ).
** SET PARAMETER ID 'MAT' FIELD ls_vbap-matnr.
** CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
WHEN OTHERS.
RETURN.
ENDCASE.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM vbak INTO TABLE gt_outtab UP TO 100 ROWS.
PERFORM init_controls.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAK'
CHANGING
it_outtab = gt_outtab
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_outtab_2.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'VBAP'
CHANGING
it_outtab = gt_outtab_2 " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_outtab_3.
CALL METHOD go_grid3->set_table_for_first_display
EXPORTING
i_structure_name = 'VBEP'
CHANGING
it_outtab = gt_outtab_3 " empty !!!
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
EXPORTING
repid = gd_repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "ORDERS"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Refresh display of detail ALV list
CALL METHOD go_grid3->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
OTHERS = 2.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
" Double-click on first or second ALV grid
WHEN 'GET_ITEMS' OR
'GET_SCHEDULE_LINES'.
PERFORM get_details.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form INIT_CONTROLS
* text
* --> p1 text
* <-- p2 text
FORM init_controls .
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create splitter container
CREATE OBJECT go_splitter
EXPORTING
parent = go_docking
rows = 1
columns = 2
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_left.
CALL METHOD go_splitter->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = go_cell_right.
* Create 2nd splitter container
CREATE OBJECT go_splitter_2
EXPORTING
parent = go_cell_left
rows = 2
columns = 1
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter_2->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = go_cell_top.
CALL METHOD go_splitter_2->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = go_cell_bottom.
* Create ALV grids
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_cell_top
EXCEPTIONS
OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_cell_bottom
EXCEPTIONS
OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid3
EXPORTING
i_parent = go_cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc NE 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid3.
ENDFORM. " INIT_CONTROLS
*& Form GET_DETAILS
* text
* --> p1 text
* <-- p2 text
FORM get_details .
* define local data
DATA: ls_row TYPE lvc_s_row,
ls_col TYPE lvc_s_col.
data: ls_outtab type vbak,
ls_outtab_2 type vbap,
ls_outtab_3 type vbep.
BREAK-POINT.
CASE gd_okcode.
WHEN 'GET_ITEMS'.
CALL METHOD go_grid1->get_current_cell
IMPORTING
* e_row =
* e_value =
* e_col =
es_row_id = ls_row
es_col_id = ls_col
* es_row_no =
read TABLE gt_outtab into ls_outtab index ls_row-index.
refresh: gt_outtab_2,
gt_outtab_3.
SELECT * FROM vbap into TABLE gt_outtab_2
WHERE vbeln = ls_outtab-vbeln.
WHEN 'GET_SCHEDULE_LINES'.
CALL METHOD go_grid2->get_current_cell
IMPORTING
* e_row =
* e_value =
* e_col =
es_row_id = ls_row
es_col_id = ls_col
* es_row_no =
READ TABLE gt_outtab_2 into ls_outtab_2 index ls_row-index.
refresh: gt_outtab_3.
SELECT * FROM vbep into TABLE gt_outtab_3
WHERE vbeln = ls_outtab_2-vbeln
AND posnr = ls_outtab_2-posnr.
WHEN OTHERS.
RETURN.
ENDCASE.
IF ( lcl_eventhandler=>ms_row = ls_row AND
lcl_eventhandler=>ms_col = ls_col ).
MESSAGE 'Current cell identical' TYPE 'I'.
ELSE.
MESSAGE 'Current cell NOT identical' TYPE 'I'.
ENDIF.
ENDFORM. " GET_DETAILS
Regards
Uwe -
Hide alv grid PR custom subscreen
Hello All,
I have a custom subscreen on PR ( bulit via screen exit) with ALV grid and some screen elements ( to get input data from user) on it.
In create and change PR mode, I need to get the input ( could be multiple rows with the help of create next icon )from user and update ALV grid with the input values. But in PR display mode, I need to hide the ALV grid.
I tried using desctructor method FREE, but dint work.
Any suggestions?
Thanks,
ChandraI have a similiar problem:
I have a dynpro where there are different possibilities for ALV grids to be shown. I have 10 containers (that's the maximum number of ALV grids that can appear) and want to use the highest first. Now, it might be that I want to show another ALV in a container I have had an ALV before, therefore I must hide / delete / destroy the previous ALV in this container.
I use the FREE( ) method of the alv controls, I clear and free all references, but still, even after leaving and accessing the dynpro again, the ALV is shown. That's why I'd need some help here too...
Thanks in advance, Christopher -
Hi,
I have created on one Dynpro 3 Custom Controls, which are
responsible for Three ALV Grid Reports.
I have named CC1 for ALV1 CC2 for ALV2 and CC3 for ALV3.
I can put the Data for each ALVs.
So far so good, but if I save the Layout global for one ALV and start the Program again, disappears me some Elements on other ALVs like Columns , Buttons etc...
I have used Method set_for_first_display.
Thanks for your Replies.
Best Regards
Beserithan MalabakanWha tis happening is the VARIANT parameter values that you are passing are the same for all the three grids. So, once you alter the layout of one its changing all the grids. What you need to do is to specify a unique name in the field HANDLE of the parameter VARIANT for each grid, say the grid name.
Then this problem will not occur and you will have variants specific to the grid.
It has nothing to do with the global / user defined layouts.
Regards,
Ravi
Note: Please mark the helpful answers -
I need model program for alv grid control
hi all,
i need example program and detailed description of alv grid control . what is the features of alv grid control over normal alv.Hi,
Check out the below sample code.I have pasted even the include programs, u can copy the program.
SAP-User : BWR2KOR *
Author (name) : Bharadwaja R *
Created on/in : 07.02.2006 *
Description : Report for Listing IDOC-Informations for the given *
segment on the selection screen *
Changes: - for each change: add chapter *
- changes get a changes number (ascending) *
- source code has to be marked with SAP-user-name *
change date and number *
Change number : *
Enhance/Change numer: 90xxxx (900001-909999) -> /RB11/YBF_MODIF *
SAP-User : *
Author (name) : *
Created on/in : *
Reason for the change: *
REPORT Y16S_VIEW_IDOC_CONTENT LINE-SIZE 230
NO STANDARD PAGE HEADING.
Data declarations
INCLUDE Y16S_VIEW_IDOC_CONTENT_D01I.
Selection screen
INCLUDE Y16S_VIEW_IDOC_CONTENT_S01I.
Events
INCLUDE Y16S_VIEW_IDOC_CONTENT_E01I.
Routines for program
INCLUDE Y16S_VIEW_IDOC_CONTENT_F01I.
START-OF-SELECTION.
Get the fieldcatalog
PERFORM get_fcat.
**Method for getting the reference for the structure
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING it_fieldcatalog = g_t_fieldcat
IMPORTING ep_table = dref.
**Passing the reference of the structure to field-symbol of type table
ASSIGN dref->* TO .
Fill IDoc data
PERFORM fill_data.
Display ALV
perform display_grid.
INCLUDE Y16S_VIEW_IDOC_CONTENT_D01I *
Data declaration : Tables used *
TABLES : edidd, "Data record (IDoc)
edidc, "Control record (IDoc)
edid4, "IDoc Data Records from 4.0 onwards
dd03d, "Dynpro fields for table fields
edsappl, "EDI: IDoc Segment Application Structure
int_seg, "Data record details display
dd03l, "Table Fields
edisegment. "IDoc Development : IDoc Segment
Name of segment
DATA : g_f_segment LIKE dntab-tabname.
*--Data Declaration.
FIELD-SYMBOLS : TYPE ANY.
DATA : BEGIN OF g_t_edid OCCURS 0,
docnum LIKE edid4-docnum,
segnum LIKE edid4-segnum,
sdata LIKE edid4-sdata,
END OF g_t_edid.
*DATA : g_t_edid LIKE edid4 OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF g_t_edidc OCCURS 0,
docnum LIKE edidc-docnum,
credat LIKE edidc-credat,
mestyp LIKE edidc-mestyp,
END OF g_t_edidc.
DATA : BEGIN OF g_t_appl OCCURS 0,
fieldname LIKE edsappl-fieldname,
END OF g_t_appl.
DATA : g_v_tabix LIKE sy-tabix.
ALV Declarations
*Declaration of type groups
TYPE-POOLS :
slis. "Globale Typen für generische Listbausteine
DATA: g_f_okcode LIKE sy-ucomm,
g_container TYPE scrfname VALUE 'G_C_ALV',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
FIELD-SYMBOLS: .
Class
CLASS: g_cl_event DEFINITION DEFERRED.
Alv Grid Constants
DATA : g_c_handle(4) TYPE c VALUE '0100',
g_c_save(1) TYPE c VALUE 'A',
g_c_exit(4) TYPE c VALUE 'EXIT'.
DATA: g_v_layout TYPE lvc_s_layo,
g_f_print TYPE lvc_s_prnt,
g_f_variant TYPE disvariant,
g_v_recv TYPE REF TO g_cl_event.
CONSTANTS : gc_ucomm_sel_criteria(12) VALUE 'SEL_CRITERIA'.
CLASS G_Cl_EVENT DEFINITION
Class to handle GRID Events *
CLASS g_cl_event DEFINITION.
PUBLIC SECTION.
METHODS:
constructor IMPORTING value(grid_name) TYPE REF TO
cl_gui_alv_grid,
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
PRIVATE SECTION.
DATA: g_v_alv TYPE REF TO cl_gui_alv_grid.
ENDCLASS. "g_cl_event DEFINITION
CLASS g_cl_events IMPLEMENTATION
Class to handle GRID Events *
CLASS g_cl_event IMPLEMENTATION.
Handling methods
METHOD constructor.
g_v_alv = grid_name.
ENDMETHOD. "constructor
Tool bar
METHOD handle_toolbar.
CONSTANTS:
lc_quickinfo_sel_criteria(111) VALUE 'Show Selection Criteria'.
DATA:
l_toolbar TYPE stb_button.
CLEAR l_toolbar.
MOVE 0 TO l_toolbar-butn_type.
MOVE gc_ucomm_sel_criteria TO l_toolbar-function.
MOVE icon_select_with_condition TO l_toolbar-icon.
MOVE lc_quickinfo_sel_criteria TO l_toolbar-quickinfo.
MOVE space TO l_toolbar-disabled.
APPEND l_toolbar TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
User Command
METHOD handle_user_command.
CASE e_ucomm.
When Exit button is used
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
ENDMETHOD. "handle_user_command
ENDCLASS. "g_cl_event IMPLEMENTATION
INCLUDE Y16S_VIEW_IDOC_CONTENT_S01I *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
Creation Date of IDoc
SELECT-OPTIONS : s_date FOR edidc-credat.
IDoc Number
SELECT-OPTIONS : s_idocnm FOR edidc-docnum.
Basic IDoc type
SELECT-OPTIONS : s_idoctp FOR edidc-idoctp.
*Message type
SELECT-OPTIONS : s_mestyp FOR edidc-mestyp.
Segment name
PARAMETERS : p_segnam LIKE edisegment-segtyp OBLIGATORY.
Field name
SELECT-OPTIONS : s_fldnam FOR dd03d-fieldname NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
Field name
PARAMETERS : p_fldnam LIKE dd03d-fieldname.
Field contents of a field of an IDoc segment
SELECT-OPTIONS : s_fldval FOR int_seg-string.
SELECTION-SCREEN END OF BLOCK b2.
INCLUDE Y16S_VIEW_IDOC_CONTENT_E01I *
Check for IDoc number on selection screen
AT SELECTION-SCREEN ON s_idocnm.
IF NOT s_idocnm IS INITIAL.
Data fetch : Control record (IDoc)
SELECT COUNT( * ) FROM edidc
WHERE docnum IN s_idocnm.
IF sy-subrc NE 0.
MESSAGE e429(mo).
ENDIF.
ELSE.
message for required entry.
MESSAGE e055(00).
ENDIF.
Check for segment name on selection screen
AT SELECTION-SCREEN ON p_segnam.
Check segment name is an input on selection screen
IF NOT p_segnam IS INITIAL.
Data fetch : Table Fields
SELECT SINGLE * FROM dd03l
WHERE tabname EQ p_segnam.
IF sy-subrc NE 0.
MESSAGE e429(mo).
ENDIF.
ENDIF.
F4 help for fieldname
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_fldnam-low.
DATA : l_rc LIKE sy-subrc.
Check segment name on selection screen is not empty
IF NOT p_segnam IS INITIAL.
PERFORM get_f4help USING l_rc.
IF l_rc = 0.
Fill the selected field name
READ TABLE g_t_appl INDEX g_v_tabix.
CHECK sy-subrc = 0.
s_fldnam-low = g_t_appl-fieldname.
s_fldnam-sign = 'I'.
s_fldnam-option = 'EQ'.
APPEND s_fldnam.
ENDIF.
ENDIF.
Check for field name on selection screen
AT SELECTION-SCREEN ON s_fldnam.
IF NOT p_fldnam IS INITIAL.
Data fetch : Table Fields
SELECT SINGLE * FROM dd03l
WHERE tabname EQ p_segnam
AND fieldname IN s_fldnam.
IF sy-subrc NE 0.
MESSAGE e429(mo).
ENDIF.
ENDIF.
F4 help for fieldname
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fldnam.
DATA : l_rc LIKE sy-subrc.
Check segment name on selection screen is not empty
IF NOT p_segnam IS INITIAL.
F4 Help for fieldname
PERFORM get_f4help USING l_rc.
IF l_rc = 0.
Fill the selected field name
READ TABLE g_t_appl INDEX g_v_tabix.
CHECK sy-subrc = 0.
p_fldnam = g_t_appl-fieldname.
ENDIF.
ENDIF.
Check for field name on selection screen
AT SELECTION-SCREEN ON p_fldnam.
IF NOT p_fldnam IS INITIAL.
Data fetch : Table Fields
SELECT SINGLE * FROM dd03l
WHERE tabname EQ p_segnam
AND fieldname EQ p_fldnam.
IF sy-subrc NE 0.
MESSAGE e429(mo).
ENDIF.
ENDIF.
Check for field name on selection screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_fldval-low.
Check field name is an input on selection screen
IF NOT p_fldnam IS INITIAL.
Get the domain values as F4 help
PERFORM get_domain_value.
ENDIF.
*Check for Message type on selection screen
AT SELECTION-SCREEN ON s_mestyp.
IF NOT s_mestyp IS INITIAL.
Data fetch : Logical message types
SELECT COUNT( * ) FROM edmsg
WHERE msgtyp IN s_mestyp.
IF sy-subrc NE 0.
MESSAGE e429(mo).
ENDIF.
ENDIF.
*Check for Basic type on selection screen
AT SELECTION-SCREEN ON s_idoctp.
IF NOT s_idoctp IS INITIAL.
Data fetch : Basic types
SELECT COUNT( * ) FROM edbas
WHERE idoctyp IN s_idoctp.
IF sy-subrc NE 0.
MESSAGE e429(mo).
ENDIF.
ENDIF.
*& Form GET_F4HELP
text
-->P_L_RC text
FORM get_f4help USING p_l_rc LIKE sy-subrc.
DATA : l_v_segment LIKE edsappl-segtyp.
DATA : l_t_help_value LIKE help_value OCCURS 0 WITH HEADER LINE.
Segment name
l_v_segment = p_segnam.
Data fetch : EDI: IDoc Segment Application Structure
SELECT pos fieldname FROM edsappl
INTO CORRESPONDING FIELDS OF TABLE g_t_appl
WHERE segtyp = l_v_segment
ORDER BY pos.
Popup having data
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
endpos_col = 110
endpos_row = 16
startpos_col = 90
startpos_row = 1
titletext = text-001
IMPORTING
choise = g_v_tabix
TABLES
valuetab = g_t_appl
EXCEPTIONS
break_off = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Return code
p_l_rc = sy-subrc.
ENDFORM. " GET_F4HELP
*& Form GET_DOMAIN_VALUE
text
-->P_L_RC text
FORM get_domain_value.
DD: Domain header with text
DATA : l_s_dd01v LIKE dd01v.
Value table
DATA : l_v_valuetab LIKE l_s_dd01v-entitytab.
RFC Table Read: Description of Fields to Retrieve
DATA : l_t_db_fld LIKE rfc_db_fld OCCURS 0 WITH HEADER LINE.
RFC Table Read: Select Options / WHERE Clause
DATA : l_t_options LIKE rfc_db_opt OCCURS 0 WITH HEADER LINE.
Table with a 512 byte field
DATA : l_t_valuetab LIKE tab512 OCCURS 0 WITH HEADER LINE.
*Data Dictionary access routines
CALL FUNCTION 'G_DOMAIN_READ'
EXPORTING
domain = p_fldnam
langu = sy-langu
IMPORTING
domain_attr = l_s_dd01v
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
l_v_valuetab = l_s_dd01v-entitytab.
l_t_db_fld-fieldname = p_fldnam.
APPEND l_t_db_fld.
External access to R/3 tables via RFC
CALL FUNCTION 'RFC_READ_TABLE'
EXPORTING
query_table = l_v_valuetab
DELIMITER = ' '
NO_DATA = ' '
ROWSKIPS = 0
ROWCOUNT = 0
TABLES
options = l_t_options
fields = l_t_db_fld
data = l_t_valuetab
EXCEPTIONS
table_not_available = 1
table_without_data = 2
option_not_valid = 3
field_not_valid = 4
not_authorized = 5
data_buffer_exceeded = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CLEAR g_v_tabix.
IF NOT l_t_valuetab[] IS INITIAL.
Popup having data
CALL FUNCTION 'POPUP_WITH_TABLE_DISPLAY'
EXPORTING
endpos_col = 110
endpos_row = 16
startpos_col = 90
startpos_row = 1
titletext = text-001
IMPORTING
choise = g_v_tabix
TABLES
valuetab = l_t_valuetab
EXCEPTIONS
break_off = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE l_t_valuetab INDEX g_v_tabix.
CHECK sy-subrc = 0.
Fill the select-options of Fieldvalue
s_fldval-low = l_t_valuetab-wa.
s_fldval-sign = 'I'.
s_fldval-option = 'EQ'.
APPEND s_fldval.
ENDIF.
ENDFORM. " GET_DOMAIN_VALUE
INCLUDE Y16S_VIEW_IDOC_CONTENT_F01I *
*& Module STATUS_0100 OUTPUT
ALV grid output
MODULE status_0100 OUTPUT.
*set the screen elements
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'TITLE100'.
*instantiation
IF g_custom_container IS INITIAL.
g_v_layout-zebra = 'X'.
g_v_layout-sel_mode = 'A'.
Create custom container
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
Create ALV grid
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
CREATE OBJECT g_v_recv EXPORTING grid_name = grid1.
Display ALV grid
CALL METHOD grid1->set_table_for_first_display
EXPORTING
i_save = g_c_save
is_layout = g_v_layout
is_print = g_f_print
is_variant = g_f_variant
CHANGING
it_fieldcatalog = g_t_fieldcat
it_outtab = refresh_table_display.
ENDIF.
User command
SET HANDLER g_v_recv->handle_user_command FOR grid1.
CALL METHOD grid1->set_toolbar_interactive.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
User actions on grid
MODULE user_command_0100 INPUT.
Dispatch the okcode
CALL METHOD cl_gui_cfw=>dispatch.
CASE g_f_okcode.
WHEN g_c_exit.
PERFORM exit_program.
WHEN OTHERS.
*do nothing
ENDCASE.
CLEAR g_f_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form EXIT_PROGRAM
Exit from the Grid
--> p1 text
<-- p2 text
FORM exit_program.
Container for Custom Controls in the Screen Area
CALL METHOD g_custom_container->free.
*Control Framework Basic Class
CALL METHOD cl_gui_cfw=>flush.
Call the selection screen
SET SCREEN 0.
LEAVE SCREEN.
ENDFORM. " EXIT_PROGRAM
*& Form GET_FCAT
Field catalog fill
--> p1 text
<-- p2 text
FORM get_fcat.
*Segment details regarding fields
PERFORM get_segment_details.
Populate the Fieldcatalog
PERFORM fill_fieldcat.
IF g_f_variant-variant IS INITIAL.
Get the default variant
g_f_repid = sy-repid.
CLEAR : g_f_variant.
g_f_variant-report = g_f_repid.
g_r_x_variant = g_f_variant.
Get default variant
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_c_save
CHANGING
cs_variant = g_r_x_variant
EXCEPTIONS
not_found = 2.
g_f_variant = g_r_x_variant.
g_f_variant-variant = 'X'.
ENDIF.
ENDFORM. " GET_FCAT
*& Form FILL_DATA
Fill the output internal table
--> p1 text
<-- p2 text
FORM fill_data.
FIELD-SYMBOLS TYPE ANY.
DATA : l_rc LIKE sy-subrc.
*Get the IDoc data
PERFORM get_data.
LOOP AT g_t_edid.
*Check for filtering the values
IF ( NOT ( p_fldnam IS INITIAL AND s_fldval[] IS INITIAL ) ).
Field value check
PERFORM check_fieldvalue USING l_rc.
IF l_rc NE 0.
CONTINUE.
ENDIF.
ENDIF.
ASSIGN LOCAL COPY OF g_t_edid TO .
ENDLOOP.
ENDFORM. " FILL_DATA
*& Form DISPLAY_GRID
Display ALV grid
--> p1 text
<-- p2 text
FORM display_grid.
Call ALV grid
CALL SCREEN 100.
ENDFORM. " DISPLAY_GRID
*& Form CHECK_FIELDVALUE
Check the fieldvalue
-->P_L_RC text
FORM check_fieldvalue USING p_l_rc LIKE sy-subrc.
Segment data
ASSIGN g_t_edid-sdata TO CASTING TYPE (p_segnam).
Segment fields
LOOP AT g_t_segment WHERE fieldname = p_fldnam.
ASSIGN COMPONENT g_t_segment-fieldname
OF STRUCTURE IN s_fldval.
p_l_rc = 0.
ELSE.
p_l_rc = 4.
ENDIF.
ENDLOOP.
ENDFORM. " CHECK_FIELDVALUE
*& Form GET_DATA
Get the IDoc data
--> p1 text
<-- p2 text
FORM get_data.
*Clear the header line of the internal table
CLEAR : g_t_edid,
g_t_edidc.
Clear the body of the internal table
REFRESH : g_t_edid,
g_t_edidc.
*Data fetch : Control record (IDoc)
SELECT docnum credat mestyp FROM edidc
INTO TABLE g_t_edidc
WHERE docnum IN s_idocnm AND
credat IN s_date AND
mestyp IN s_mestyp AND
idoctp IN s_idoctp.
*Date/Message type if not initial
IF ( ( NOT ( s_date[] IS INITIAL ) )
OR ( NOT ( s_mestyp[] IS INITIAL ) )
OR ( NOT ( s_idoctp[] IS INITIAL ) ) ).
Check the control record of the IDoc
PERFORM check_control_data.
ELSE.
Data fetch : IDoc Data Records from 4.0 onwards
SELECT docnum segnum sdata FROM edid4 INTO TABLE g_t_edid
WHERE docnum IN s_idocnm AND
segnam EQ p_segnam.
ENDIF.
ENDFORM. " GET_DATA
*& Form CHECK_CONTROL_DATA
Check the control data of IDoc
--> p1 text
<-- p2 text
FORM check_control_data.
CHECK NOT g_t_edidc[] IS INITIAL.
Data fetch : IDoc Data Records from 4.0 onwards
SELECT docnum segnum sdata FROM edid4 INTO TABLE g_t_edid
WHERE docnum IN s_idocnm AND
segnam EQ p_segnam.
LOOP AT g_t_edid.
READ TABLE g_t_edidc WITH KEY docnum = g_t_edid-docnum.
*Check for the correct MT
IF sy-subrc = 0.
CONTINUE.
ELSE.
*Delete, if unsuccessful
DELETE g_t_edid.
ENDIF.
ENDLOOP.
ENDFORM. " CHECK_CONTROL_DATA
*& Form GET_SEGMENT_DETAILS
Segment details regarding fields
--> p1 text
<-- p2 text
FORM get_segment_details.
Segment name
g_f_segment = p_segnam.
CALL FUNCTION 'NAMETAB_GET'
EXPORTING
langu = sy-langu
tabname = g_f_segment
TABLES
nametab = g_t_segment
EXCEPTIONS
internal_error = 1
table_has_no_fields = 2
table_not_activ = 3
no_texts_found = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_SEGMENT_DETAILS
*& Form FILL_FIELDCAT
Populate the Fieldcatalog
--> p1 text
<-- p2 text
FORM fill_fieldcat.
DATA : lv_pos TYPE i.
IDoc number in the catalog
lv_pos = 1.
g_r_fieldcat-fieldname = 'DOCNUM'.
g_r_fieldcat-ref_table = 'EDID4'.
g_r_fieldcat-ref_field = 'DOCNUM'.
g_r_fieldcat-key = 'X'.
g_r_fieldcat-col_pos = lv_pos.
g_r_fieldcat-outputlen = '10'.
APPEND g_r_fieldcat TO g_t_fieldcat.
Segment number in the catalog
ADD 1 TO lv_pos.
g_r_fieldcat-fieldname = 'SEGNUM'.
g_r_fieldcat-ref_table = 'EDID4'.
g_r_fieldcat-ref_field = 'SEGNUM'.
g_r_fieldcat-key = 'X'.
g_r_fieldcat-col_pos = lv_pos.
g_r_fieldcat-outputlen = '10'.
g_r_fieldcat-colddictxt = 'X'.
g_r_fieldcat-reptext = text-002.
APPEND g_r_fieldcat TO g_t_fieldcat.
**Populating fieldcatalog with segment field
LOOP AT g_t_segment .
ADD 1 TO lv_pos.
CLEAR g_r_fieldcat.
g_r_fieldcat-fieldname = g_t_segment-fieldname .
g_r_fieldcat-ref_table = p_segnam.
g_r_fieldcat-ref_field = g_t_segment-fieldname .
g_r_fieldcat-key = 'X'.
g_r_fieldcat-col_pos = lv_pos.
g_r_fieldcat-outputlen = '10'.
Check for given fields on the selection screen
IF NOT g_t_segment-fieldname IN s_fldnam.
g_r_fieldcat-no_out = 'X'.
ENDIF.
*Column text
IF g_t_segment-fieldtext IS INITIAL.
*Get the DDIC texts for columns
PERFORM get_ddic_texts.
ENDIF.
APPEND g_r_fieldcat TO g_t_fieldcat.
ENDLOOP.
ENDFORM. " FILL_FIELDCAT
*& Form GET_DDIC_TEXTS
Get the DDIC texts
--> p1 text
<-- p2 text
FORM get_ddic_texts.
DATA : l_f_descr TYPE string.
Get the texts for the data element
CALL FUNCTION 'TB_DATAELEMENT_GET_TEXTS'
EXPORTING
name = g_t_segment-fieldname
IMPORTING
description = l_f_descr
LENGTH_FIELD =
LENGTH_HEADER =
LENGTH_LONG =
LENGTH_MIDDLE =
LENGTH_SHORT =
TEXT_HEADER =
TEXT_LONG =
TEXT_MIDDLE =
TEXT_SHORT =
EXCEPTIONS
not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*Add DDIC text..
g_r_fieldcat-colddictxt = 'X'.
g_r_fieldcat-reptext = l_f_descr.
ENDFORM. " GET_DDIC_TEXTS
Maybe you are looking for
-
I connected my mini with the Apple DVI - S video adaptor to an S video-Scart cable to my TV (PAL- europe) I can only get a gray scale image (no color) Sound is OK. Is this a known problem, what is the solution? Thanks!
-
Performance problem, statspack report included.
HI, on my 9.2.0.8 cpu_count=12 EE I've got job which takes 5h , there is strange top sql reported: STATSPACK report for DB Name DB Id Instance Inst Num Release Cluster Host E1 2020101010 E1 1 9.2.0.
-
Creating a new OrdImage in Java
I want to manipulate and validate an incoming OrdImage object before adding a record for it in the database. Specifically, I want to do a hash on the file and check for duplicates. The few examples I've seen fetch an existing row from the database th
-
Cisco Call manager 7.2 through ASA firewall
Hi, We have a part of our building that we have sold to another company. We still have to provide them with some resources until they can install their own network. We have a 6500 switch there and we are going to implement a ASA in between and lock d
-
I currently have Photoshop Elements 9 and want to change to Photoshop Elements 12
I need to understand how ver. 9 converts to ver. 12, how does the organizer, specifically I want to understand file structure, folders & tagging