In debit invoice price is not flowing from debit request order

hi ...
after making debit memo order ..when I am going to raise debit memo invoice ... values in pricing is not coming ..I hv checked in copy control ... in price type --"copy price unchanged is maintained " ... it is type " D "
Pls advc

hello,
and what do you have in the order? As in this case it should be taken over into the invoice. If your order doesn't have pricing data, don't expect them in the invoice either. What happens if you do a new pricing in the invoice?

Similar Messages

Excise Values are not flowing from J1IJ to VF01

Hi All,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
I have gone through SDN, everybody is suggesting about 356 routine.
My scenario is STO from Plant to Depot and Sale from Depot to Customer.
ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
In J1IJ, excise values are coming but in VF01 it is not coming.
Kindly help me.
With Regards
Azeez.Mohd

Hi,
in j1ig initial screen which excise group/series group i need to enter
is it of supplying plant or depot --- Enter Your Excise group
If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
You can also use the Excise Invoice Details tab
Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
use Depot Excise Invoice in case of transfer from another depot
and Excise Inv. Date
On next screen,
In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
Hope this will resolve your issue.
Regards,
Krishna O

Depot Sales-Excise values are not flowing from J1iJ to VF01

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference. And the excise values are shown here correctly.
Issue: In VF01- when we are raising the commercial invoice , the duty values are not flowing from the J1IJ transaction. Instead the values are showing Zero for all the three condition types namely JEXP, JECS and JHCS. We have used the Pricing Procedure ZINDEP and 356 routine.
Inputs on this how to solve will be highly appreciated.. as we are in critical stage.
What are the checks to be ensured to Get the values flow from J1IJ to VF01.
Scenario: STO from Mfrg Plant to Depot and Depot sales to customer.
Me21N-Me29N-VL10B-VL02N-VF01-J1IIn-MIGO-(STO process completes)-VA01-VL01N-J1IJ-VF01(duty values should flow from the J1IJ referenced Excise Invoice) Correct me if I am wrong.
Any user exits, Notes please let me know. I could not find any. I have gone through the forum threads, which speaks about 356 routine, J1ID- checks etc.
Thanks&Regards
Sreekanth:

Hi!
Am sure you would have captured the Excise at Depot with J1IG.
Also, have you saved the billing document to check the duties?
Thirdly, after save, again open the billing doc and go to Header-Conditions then Save. This part does not seems logical, but i am sharing my practical experience.
Please check condition records if any.
Regards
Arun

Price is not transferred from materail contract to po

Dear Experts,
When i create a service po , the price is not transferred from material contract to po , for material po it is working fine.In debugging i got to know that it is picking up purchase requisitions package number , and not contracts package number.Can u guys help me out wid dis,my all UAT is pending becoz of this issue
Reward points for helpful answers
deepthee

hi,
when you create a service po, the prices from the Contract Service line items will flow down to Service PO when you make service selection in Service PO.
when you create servcie PO, and you enter item cat 'D', you have the option to select the servcies from your Contract by 'Service Selection' button.
If you use this, the price from contratc will flow to PO. Otherwise the prices will not flow.
Regards
Seema

Excise Duty Value not flow from J1IJ to VF01

Hi SAP Expert,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ for pricing procedure JINDEP. I maintained Alt Cal type as 356 in Pricing procedure JINDEP for Excise condition types JEXP. But it is still not flowing. I am using Tax Procedure TAXINN.
Do I need to go to VTFL In item level copying requirement to set pricing type: to C ??
But once i set, it will impact other billing document too. Please advise.
Thanks.

Hi,
I have successfully posted Excise Invoice at Depot using J1iJ.
When i create billing via Vf01, i am unable to see the value of Excise Duty in item pricing condition from J1iJ.
I analyse the pricing condition for condition type JEXP, below is what i got :
This message tells you that the condition record exists, but has not been set in the document. If pricing was carried out again for the document item, then the condition would be set.
There are different reasons for this:
1.The condition was deleted manually in the item condition screen.
2. The condition record was created later. Please note that order processing and pricing have buffer mechanisms. This means that a newly added condition record might only be found after order processing has been left completely and then started again.
If the condition type is used for subsequent settlement (rebate), there may be subsequent updating of business volume (the agreement is is created retrospectively). The document conditions do not contain the condition record, as the condition record was not created when pricing was carried out. Updating of business volume is carried out using special functions for subsequent settlement.
1. When an item was added, the condition record was accessed with key fields other than change time. This could lead to different results in the requirements check at the time of adding and the change time. This can occur when modifications are made.
2. In billing (or when copying orders): Certain condition types were not determined in the source document (this is usually controlled by the pricing requirements). When creating the document, the document flow (TVCPF,TVCPA) is processed using a pricing type that does not redetermine these condition types, although they are supposed to be called via the requirements.
Is it correct that i assigned routine 356 to Pricing Condition JINDEP ?

Price was not picking from the Condition type for Item Category 'P' in PO

Hi Experts,
I Created one condition type based on Material and WBS which price was fixed based on this
I used the Purchase Order having Item Category P or Q Price should pick from the condition type where I mapped the WBS Element and Material.
The Net price was not picking from the Condition type Record. Why? What should be the Problem?
Whether my logic is correct or not?

The Scenario: I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
Please help on this.
Thanks
Muthukumar

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

Po prices is not updateing from inforecord

Guru
In Po when enter the Material & QTy & Price for that material is appering from info earlear now the problem is that Price is not picking from the last Po or Inforecord what must be problem. can u help me
Thanks
Sudhir

Hi
Price from inforecord has following steps
1) System will search for inforecord with valid price if it finds then the price will be pulled to PO
2) If there is inforecord and no valid price then system will look for last PO to pull the price.
3) If there is no info record then we have to enter the price manually.
In your case check the above prerequisites additon to that
1) If it is refering the last PO no then check whether the item is deleted or not.
2) If it is refereing the valid price in info record then check the validity period of the PIR.
Hope it helps.
Thanks/Karthik

PO price is not picking from Inforecord

Hello All,
When PO is created by one particular user the price is not picked from inforecord. Inforecord validity periods are active and this price is not of previous purchase order. The problem is only for this user. Can you please advice what needs to be done here.
Thanks a lot in advance.
Best regards,
Raji

Hi,
1. Check out user profile whether EVO parameter is maintained properly for all the users.
2. Check in EVO parameter key you set radio button on Always copy.
EVO is parameter ID for Defining Defualt values for buyer. Relevent customization carried out in SPRO --> Mat mangt --> Pur --> Env data --> define default value for buyer.
Rewards, if helpful to you.
rgds,
rajesh

The delivery date should not flow from PR to PO.

Dear Gurus,
While creating a P.O with reference to PR.
The delivery date should not flow from PR to PO.
Any settings are there for this

there is no planning.
this is a utilites industry.
if there is any way to do.The delivery date should not flow from PR to PO.
please share ur ideas

Can i Match invoices with a currency different from the purchase order curr

Dear Valued Consultant,
Can i Match invoices with a currency different from the purchase order curr
Thanks

Hi,
As a functionality, Payables will not allow matching an invoice to a purchase order that is in a different currency.
Refer Oracle Public sector payables user guide for 11i (page 4-94).
I understand that there is an enhancement request (3286623) logged for this functionality.
Please refer Note:172291.1
- Thiagu

Block delivery creation if price has not been maitaned in sales order

Hi,
I have the following issue.,
Say if have a sales order with 4 schedule lines, where the price has been updated only for 2 schedule lines. The order is incomplete.
Is it possible to block deliveries been created if all the schedule line prices are not complete, atleast for the schedule lines where a price has not been maintained?
Appreciate your help on this.
Keshini

Hi,
It is possible to save the order, however the order remains incomplete.
They want the order to be saved without having the prices. Prices are known at a later stage before delivery creation.
Can we set up the system so that no deliveries can be created if a price is not maintained in the sales order?
Thanks
Keshini

Changed JAOQ values not flowing from J1IEX to MIRO

Dear CIN experts,
We are having Dealers excise invoice capturing scenario in our implementation.
Here, we are capturing ADC for imported scrap at the time of posting J1IEX, which is not known at the time of punching PO. a nominal value has been maintained using JAOQ condition type.
While posting J1IEX, the actual excise values (BED, ECESS and SECESS) as in Traders excise invoice is captured including ADC.
All the values except AED (captured ADC) is flowing from J1IEX to MIRO, where as AED (JMOQ) is being picked up from Purchase order.
But this is not the case if JAOP is used to capture ADC in tax procedure. the changed AED value in J1IEX is flowing to MIRO.
Is this SAP standard behavior or is that SAP has not tested these scenarios?
kindly help to solve the issue.
Thanks in advance.
Ashwin..

Hi Shankar,
Thanks for the reply.
well, AED is almost non existent now. at least not in the scenario i have explained. this is about procurement of Metal Scrap. so the SAD that the import vendor has taken credit of is transferred to us through a dealer.
with JAOP, i can increase or decrease the value of AED mentioned in PO. but this is not happening with JAOQ (value condition).
With JAOQ, the value flows from PO, with JAOP, the value flows from J1IEX.
please let me know, if you require any more clarification on the above scenario.
Thanks again for the help
Ashwin.

Revenue not flowing from Sales order to PS so no WIP in PS/WIP

Hi,
We are following PS with MTO scenario.
For calculating WIP in projects we are unable to get the actual revenue flow from Sales order to PS so entire amount in PS/WBS is sitting in WIP but its wrong.
User wants to do the Delivery and billing form Sales order only.
Can you please help us how to calculate the WIP in this scenaio.
Thanks,

Hi,
Have you made the account assignment as WBS Element in the SO line item. Ift his is done, once you create an invoice from SO the actual revenue will get updated in WBS Element.
Regards
Sreekanth

Excise duty values not flowing from PO to MIGO

All SAP Gurus,
We have created a PO and used excisable tax code in it.
Excise duties are calculated correctly in PO.
When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
System allows us to enter the Excise duty values manually.
Further excise entries and register updates are happening correcetly.
We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
Please help.
Regards,

hi
chekc following
path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
here give appripriate conditions for ur procedure as per BED cess and other
regards
kunal

Price is not Picking from Contract while making PO

Hi Gurus,
Value Contract for services is created, While making the Purchase Order the price is not picking.
Note:-The Contract is in Valid Period only.
Can any one tell me what reasons may be there.
Regards,
Prabhakaran M

As a std procedure while creating PO price won't be picked from contract. Rather you need to create a PO w.r.t the contract. In that case PO will take the same conditions stored in the contract.
Else if you are working with sourcelist, then you need to define the contract as a source of supply. In this case when you create PO system will pick Contract as source and contract price will appear in PO.

In debit invoice price is not flowing from debit request order

Similar Messages

Maybe you are looking for