In Demand planning design evaluvation

Hi All,
We are going to do roll-outs for our project, at this juncture I have some doubts on roll-outs, It will be appreciated if any one can through some light on below mentioned doubts.
- How can I evaluate my design ( i.e Number of characteristics, number of key figures and time buckets used) is optimal and makes best use of live cache space.
-- What and how, points to be checked if I wants to add some more planning areas and Master planning objects on the same existing live cache space (In terms of available size before and after adding new objects).
Thanks in advance.
-- Aravind

Hi Arvind,
If this is roll put project, then you should have all the information about business process.
1. first thing is that check whether all the char. are really important in MPOS or not.
2. Check same for key figures. Check whether there is new requirement for client side or not. Becz after implementation some new logic coming up, So check with client.
3. Check from user prespective also. I mean there is really new requirement of Plannign Area,Planning Book & data View.
4. if you reduce the CVC`s automatically LC space consume less.
5. If there is reports from APO BW then check from that prespective also.
All above points are at generic level.
Hope it will help you.
Regards
Sujay

Similar Messages

Business Process: Final Demand Plan Key Figure in the past for APO DP

Hello APO process experts,
I have a BPX question for APO DP process owners, consultants or gurus:
1.- Have you ever seen in any SAP APO customer, that in their APO DP planning books, they chose or designed to update the Final Demand Plan key Figure in the past closed historical buckets with the Actual Sales?
Meaning that that in the Past closed historical Buckets, Actual Sales and Final Demand Plan, look exactily the same.
Meaning that they create a dynamic Final Demand Plan key figure so to speak, yet they did not choose to create a key figure that also keeps the Final Demand Plan as originally entered.
2.- Would you think that doing the above, without keeping any keyfigure in the planning book that actually shows what the Final Demand Plan was in the Past, is a good practice?
The Demand Planner could still retreive the Final Demand Plan from BI reports, yet, dynamically they could never really see it in the planning book.
3.- Do you think the above dynamic key figure would bias the Demand Planner's behaviour to manipulate the future open Final Demand Plan buckets to enter volumes in order sum to a monthly total, independently of what were the over and underachievements in the past (since they are not really visible to him) ?
I would really like your feedback,
thanks in advance!
JD Loera

Hello Thanks for your feedback.
I agree with your point, and I hope that i still get more feedback from other Business Process Experts.
I am trying to build a case for my client, to challenge the decision of their initial design as this practice is going to hurt the Demand Management process, if what they intend to achieve is a true "unconstrained demand plan"
Much appreciated
JD Loera

SAP SNP and Demand Planning

Can someone provide some links or papers which have details of extracts from SAP SNP and Demand Planning and APO in general?
I am aware of help.sap.com links
Thanks

Hi,
Check these.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5f229690-0201-0010-84ba-9ee5a8958a05
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fe5d590-0201-0010-6c8d-ada86492cf11
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/bp_biv335/BI_EN/html/BW/DemPlanAnal.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/apo%2b-%2bbw%2badhoc%2breporting
Re: APO to BW Design Question
Re: APO BW Integration
Regards.

Demand Planning and eSOA

I am an SCM consultant, with particular interest in Demand Planning.
I am experienced with SAP APO, but am now interested in how the emerging eSOA environment can help with Demand Planning solutions.
Can anyone share thoughts/experiences of how web services in general and SAP eSOA in particular can provide 'added value' to Demand Planning?
Thanks,
Bob Austin, Atos Origin

Generally speaking, the demand plan or forecast is ultimately the "image" of the demand side that the supply side wishes to "mirror" or fulfill against. This view is a consolidation of many views from several players on the demand side -- whose input is provided to a much smaller group of planner-users of the Demand Planning tool.
What eSOA does is to essentially extend the Demand Planning process to this larger audience via a number of means:
The new Duet/Excel capability is one example of this extensibility. Think of all the spreadsheets that are being used to do <i>something</i> associated with the demand management process that you can now start to inject some process discipline and control into.
Another example is the ability to integrate with tools like 3rd party sales force automation or channel partners across mobile devices, etc. Because eSOA decouples the interaction layer from the data itself, I now have greater flexibility to extend and collaborate across an increasingly fragmented "demand chain" and different types of users and devices. The opportunity to add value requires some analysis and creativity -- but we are in the age of user-driven innovation and eSOA is designed for this "self service" paradigm.
Hope this helps.

Optimizer to not consider Disrtibution Demand (Planned) with SS "SZ"

Hi Experts,
We have one challanging requirement where we do not want to consider "Disrtibution Demand (Planned)" with safety stock method "SZ" in Optimization runs.
How can we achive this?
Thanks in advance...
Regards
Sujay

Hi Sujay,
Sorry but I am still not quite sure what your requirement is...
Do you want to ignore the distribution demand from what?
What do you mean by "the result will be doulbing"?
Please explain in details you scenario.
Do you want to ignore completely this demand (e.g the optimiser does not see this demand at all, so this demand does not reduce stock?)
Or do you want to ignore the demand from the safety stock calculation?
If it is the first case, then I am really struggling to understand the objective.
If it is the second case, then there is a solution, but it involves extra parameters (GLOBALSAFETYMETHOD) so I will suggest to do it under the guidance of a optimiser expert.
Actually I suggest you to get in contact with SAP optimiser expert to help you; they will be able to review your design and help you with the configuration, test and so on...
Thanks and Regards
Julien

Difference - Demand Planning

Hello All,
In Demand Planning I wanted to know the difference between Top Down Demand Planning and Bottom Up
demand planning.
Can anybody please explain ?
Thank you for the help.
Regards
Steve

Hi Amol and All,
That article definately helps and gives a perspective of the types of planning that we can use.
But, with respect of SAP, what are the configurations that we have to change if the system is designed
intially for Top Down Demand Planning ?
Thank you for all the help and efforts for the article.
Regards
Steve

Demand Plan and Supply commit

The forecast or demand plan from Demantra (monthly bucket) is sent to suppliers by Collaboration planning Via ASCP (broken to weekly bucket). The supply commit will be received through CP (wkly bucket) to ASCP (wkly bucket) to Demantra (aggregated to monthly).
The reason being demantra values are in montly bucket and we want weekly break up and thats why we are thinking to use ASCP.
Is this true?
View Plan vs. commit by month in Demantra
View Plan vs. commit by week in ASCP
CP is a portal for file exchange
Or supply commit is visible only in CP?
Please explain and suggest alternate design if possible?
Thanks

Hi,
You need to define the SNP Demand Profile and SNP Supply Profile in the Product Location master data.
Goto -> /n/SAPAPO/MAT1 -> On the selection screen below the Product / location fields, you see the fields for
- Lot Size Profile
- Demand Profile
- SNP: Demand Profile
- SNP: Supply Profile
- Deplloyment Profile.
Here you can enter the name of any profile you want to create and use the 'Create' button to create your profile. This will be then available for selection when you create your Product Location master.
Hope this helps. Let us know if you still have any doubts.
Cheers,
Srinidhi
Hope this helps.

Not able to Upload data in Demand Planning data view

Hi
I am trying to upload a csv file in to Demand planning interactive planning through " Upload Data " functionality
First I exported data from interactive planning , updated some data in file and again trying to upload same file.
I am getting following error
File cannot be uploaded
Message no. /SAPAPO/SDP_UPLOAD009
Diagnosis
File has no technical information or incorrect technical information.
Procedure
Save the file again locally. Make sure that the file has the technical information.
Could u please suggest what needs to be done
Thanks and regards,
Nitin Lavhe

Hello,
For using the upload data functionality from interactive planning grid, you need to first download the data. While downloading the data, please check the check box for "Prepare the file for upload at later time", and then select the option of putting the technical setting into the file or into the system. Either way is okay. Then try uploading the same file.
This should solve your problem.
Thank you.
Regards,
Jacky Jain.
SAP APO Architect.

Error Message When Opening Interactive Demand Planning

Hello Experts,
I have one user who is receiving the following error message when trying to open Interactive Demand Planning Workbook. Only one user is experiencing this issue. Has anyone run into this before?
GP: Graphics product not available in this system; see long text
Message no. APPLG225
Diagnosis
The required graphics product is not available on the current platform. It is either not permitted, or it does not work properly.
The application does not have a fallback strategy.
Procedure
Application/Specialists
Contact your developers to see if a fallback strategy can be implemented.
Development
Check the call method of the graphics proxy. If the graphics product is not mandatory (parameter FORCE_PROD), then the graphics proxy can select a different graphics product that is available on this platform.

Dear Adam,
The prerequisite for graphics in planning folders is the SAP Internet Graphics Server. The connection between the SAP Internet Graphics Server and the system in which you operate BPS must take place using an RFC destination of the type TCP/IP with the predefined name IGS_DEST_POFO.
Please make sure that your settings are correct and check the online help at:   http://help.sap.com/saphelp_sem320bw/helpdata/en/05/
242537cedf2056e10000009b38f936/frameset.htm
Planning Folder
> Editing a Planning Folder: Details
      >Planning Folder: Portfolio Graphic"
Please have a look at the following notes as well that helped to solve problems with the IGS. 454042 IGS: Installing and Configuring the IGS
676532 Dumps in transactions with splitter containers
I hope this helps.
Regards,
Tibor

Ask the Expert: Plan, Design, and Implement Mobile Remote Access, the Cisco Collaboration Edge Architecture

Welcome to the Cisco® Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about planning, designing, and implementing mobile remote access (Cisco Collaboration Edge Architecture) with Cisco subject matter experts Aashish Jolly and Abhijit Anand.
Cisco Collaboration Edge Architecture is an architecture that provides VPN-less access of Cisco Unified Communications resources to Cisco Jabber® users. This discussion is dedicated to addressing questions about design best practices while implementing mobile remote access.
For more information, refer to the Unified Communications Mobile and Remote Access via Cisco VCS deployment guide.
Aashish Jolly is a network consulting engineer who is currently serving as the Cisco Unified Communications consultant for the ExxonMobil Global account. Earlier at Cisco, he was part of the Cisco Technical Assistance Center (TAC), where he helped Cisco partners with installation, configuring, and troubleshooting Cisco Unified Communications products such as Cisco Unified Communications Manager and Manager Express, Cisco Unity® solutions, Cisco Unified Border Element, voice gateways and gatekeepers, and more. He has been associated with Cisco Unified Communications for more than seven years. He holds a bachelor of technology degree as well as Cisco CCIE® Voice (#18500), CCNP® Voice, and CCNA® certifications and VMware VCP5 and Red Hat RHCE certifications.
Abhijit Singh Anand is a network consulting engineer with the Cisco Advanced Services field delivery team in New Delhi. His current role involves designing, implementing, and optimizing large-scale collaboration solutions for enterprise and defense customers. He has also been an engineer at the Cisco TAC. Having worked on multiple technologies including wireless and LAN switching, he has been associated with Cisco Unified Communications technologies since 2006. He holds a master’s degree in computer applications and multiple certifications, including CCIE Voice (#19590), RHCE, and CWSP and CWNP.
Remember to use the rating system to let Aashish and Abhijit know if you have received an adequate response.
Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation on the Cisco Support Community Collaboration, Voice and Video page, in the Jabber Clients subcommunity, shortly after the event. This event lasts through June 20, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Hi Marcelo,
Yes, there are some requirements for certificates in Expressway.
Expressway Core (Exp-C)
- Can be signed by either External or Internal CA
- Better to use a cluster name even if you start with 1 peer in Exp-C cluster. In the future, if more peers are added, changes would be minimal.
- Better to use FQDN of cluster as CN of certificate, this way the traversal zone configuration on Expressway-E won't require any change even if new peers are added to Exp-C cluster.
- If CUCM is mixed mode, include security profile names (in FQDN format) as Subject Alternate Names
- The Chat Node Aliases that are configured on the IM and Presence servers. They will be required only for Unified Communications XMPP federation deployments that intend to use both TLS and group chat. (Note that Unified Communications XMPP federation will be supported in a future Expressway release). The Expressway-C automatically includes the chat node aliases in the CSR, providing it has discovered a set of IM&P servers.
- For TLS b/w CUCM, IM-P & Exp-C
+ If using self-signed certificates on CUCM, IM/P. Load Cisco Tomcat, cup, cup-xmpp certificates from IM-P on Exp-C. Load callmanager, Cisco Tomcat certificates from CUCM on Exp-C.
+ If using Internal CA signed certificates on CUCM, IM/P. Load Root CA certificates on Exp-C.
+ Load CA certificate under tomcat-trust, cup-trust, cup-xmpp-trust on IM-P.
+ Load CA certificate under tomcat-trust, callmanager-trust on CUCM.
Expressway Edge (Exp-E)
- Signed by External CA
- Configured Unified Communications domain as Subject Alternate Name
- If using a cluster, select FQDN of this peer as CN and FQDN of Cluster + this peer as Subject Alternate Name.
- If XMPP federation is being deployed, enter the same Chat Node Aliases as entered in Exp-C.
For more details, please refer to the Certificate Creation Guide for Cisco Expressway x8.1.1
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-Certificate-Creation-and-Use-Deployment-Guide-X8-1.pdf
- Aashish

Issue in creating Duet Demand Planning Sheet on the basis of Dataview

Hi all,
We are using following landscape
Landscape Details-
 SAPAPO = SCM 700 0002 - SAPKY7002
 Duet 1.5 - 150.700 SP3
 Duet Demand Planning u2013 1000.150.700.3.0 (Server Component), 1000.150.700.3.0 (Client Component)
There are 2 ways available to create Duet Demand Planning Sheet
1. On the basis of existing Demand Planning Scenario
2. On the basis of existing Data views( with SAP macros)
We are able to create Duet planning Sheet with 1 option. But we got erro with second Option that is on the basis od Data view(with macros).
Planning area, Planning Book/Data view and Selection Ids are existing and active.All the Webservices given by SAP are released.
Duet is able to retrive the list of Dataviews avilable for the Planning Area. But it is failing to retrieve the Data View Details the Error is as follow
"No view Details were found Please choose another dataview."
Web Service Call (PlanningViewDetails):
java.rmi.RemoteException:Service call exception; nested exception is:
java.rmi.UnmarshalException: Attribute schemeAgencyID is required in element ID !
Data: TYPEID DUET_JAVA_ADDON
Data: SEVERITYCODE 2
Exception of type 'System.Exception' was thrown.
Is there any SAPNOTE for this ?Any specific configuration requirement from SAPAPO side?
Any webservices to be applied?
Please help in this Issue
Thanks & Regards
Rahul

Hi
There are couple of OSS notes, you might have already seen:
1371328 Internal Error using Planning Book with Aux. KF
1431661 Duet Demand Planning 1.5 SP4.
Regards
Datta

Loading Demand plan data from APO to BW

Hi Gurus,
We have requirement as below.
we have to extract two key figures from APO to BW system
The 2key figures of APO will get data as below:
First key figure has to hold Yearly snap shot and 2nd Key figure has to hold QTY snapshot.
we have constrained production plan & sales plan keyfigures in apo demand planning and the requirement is to extract these 2 keyfigure quaintest into BI.
Data Example as below:
KF1: Yearly snapshot
KF2: Quarterly snapshots
Yearly data means from   Jan to Dec and
Quaterly data is as below
Qtr1 - Dec       JAN to Dec
Qtr2 (in FEB) - Mar to Dec
Qtr3 (in May) - Jun to Dec
Qtr4 (in Aug) - Sep to Dec
so please let me know to how to handle or extract these data into BW.
Thanks,
Shailaja

Hi Venkat,
Yes, both the key figures are ther in the same planning area.
But my question here is how to get that data into BW? meaning...
If APO/DP does the planning in the month of Sep 2010 for Jan to dec 2011 and the
values are like
Sep-10   jan      Feb mar   april may june july aug sep oct   nov dec
               15     14     13      11    10     11     12     16    14         15   22     20
Dec-10   12     14   16        18    29     20    18     15   14    12   17        20
Mar-11          10 12   13       14     15   16    17 18         20
Jul-11                                  20       40     30      40       50
meaning, If the planning is done in the month of Sep 2010 for the yr 2011 as explained above that values should be extracted into BW and the next planning will be done in the month of Dec 2010 again for entire yr of 2011 i.e. Jan 2011 to Dec2011.
But the values should be captured as they are.. that means if i use DSO the values from request1 to request2 will be over written n if i use the cube they will be added up..
Request1 will hold data of Sep2010: planning data
Request2 wil hold Dec 2010 data ....n req3 will hold data of Mar 11...
but users want to see the values or planning figures as they are.
Hope i made my requimrent more detailled.
Please let me know the solution to get the data as it is in BW.
Thanks,
Shailaja

What is best practice to do APO Demand planning

Hi,
My client wants to implement demand planning.
Client has come up with one scenario like a New Customer is created in ECC, and if I use BI and then APO flow ( ECC -> BI -> APO-BI) for Demand planning, user will have to wait for another day. (AS BI is always having one day delay).
For this scenarios user is insisting on ECC and APO-DP interface.
Will anybody suggest what should be the best practice for Demand planning.
ECC -> Standalone BI -> Planning area (Planning is done in APO) -> Stand alone BI
Or ECC -> APO-DP (Planning is done in APO) -> Standalone BI system
I hope I am able to explain my scenario.
Regards,
ST

Hi Sujoy,
Thanks for reply.
(1) I have to get Sales Order data from ECC into BI standalone system Cube.
(2) Then from this cube same data is sent to SCM APO - BI Cube.
(3) Planning will be done in SCM APO.
(4) Planned data is again sent to BI standalone system, Using datamart on Planned area.
(5) In BI we will have reporting on cube, which has ECC sales order data and APO Planned data.
But in this case, there is always delay between data loads (firstly ECC -> BI, then BI -> APO, then APO -> BI).
In this case, if a new customer is created, Client wants to see demand planning in latest data.
How do we do APO DP generally?
Do we follow the route from BI, or directly between ECC and APO..
Hope I am able to explain the scenario..

What is the best practice for APO - Demand planning implementation

Hi,
M client wants to implement demand planning.
Cient has come up with one scenario like a New Customer is created in ECC, and if I use BI and then APO flow for Demand planning, user will have to wait for another day. (AS BI is always having one day delay).
For this scenarios user is insisting on ECC and APO-DP interface.
Will anybody suggest what should be the best practice for Demand planning.
ECC -> Standalone BI -> Planning area (Planning is done in APO) -> Stand alone BI
Or ECC -> APO-DP (Planning is done in APO) -> Standalone BI system
I hope I am able to explain my scenario.
Regards,
Saurabh

Any suggestions !!

Changing the Chart Title in Graphic View in Interactive demand Planning

Hi All,
Is it possible to change the Chart title in Graphic View in interactive demand planning screen.
When we go to interactive planning after loading the data we go to Univariate forecast then switch to graphic, the chart title shows the selection at which the planning is done. For eg; If I plan at die level and i select a particular sap material, the chart title displays Die value and not the material value.
Is it possible to change the chart title such that it displays all the selections made in selection winodw, like in the above case both Die value as well as SAP Material Number.
Thanks and Regards,
Diana

Dear Diana,
unfortunately this is not possible.
The chart title is build from the planning book name + the Show characteristic in the shuffler (+ available nav. attributes of the Show char).
The functionality you requested doesn't exist in standard.
Regards,
Tibor

In Demand planning design evaluvation

Similar Messages

Maybe you are looking for