In Design / Mac OS 10.8 / using External RAID / shortcuts disappear

Friends,
When I use In Design, the key to my success is using a whole bunch of shortcuts in my FINDER WINDOW:
But then, when I unplug my RAID external drive from my laptop, I lose all my shortcuts!!!!
Like this:
What can I do to fix this??

I have posted on the Mac forum and absolutely nobody has responded:
https://discussions.apple.com/thread/4898631

Similar Messages

  • Mac Pro freezes when using external drives

    I have a 2009 imac 27 and a macbook pro. I do a lot of design work so I have started saving all my work to a time capusle with both computers linked up to it. This has been fine for all software used, final cut, adobe cs5 master collection, cinema 4d etc.
    My problem started when I got a mac pro. If I try to save directly to the time capsule I get the coloured "wheel of wait" and the software, eg illustrator shows 100% cpu usage and never drops back down. Eventually I can't do a thing.
    I installed cs6 onto the macbook pro and got the same thing.
    But, I also have the same problem if I try to put files on a usb stick from the mac pro, Finder goes to 100% cpu and stops responding or transfer stops about 8mb in and doesn't go any further and I cant stop the transferto  try again. It's there until I reboot. Sometimes it locks up the whole system.

    The Time Capsule is a horrible place to routinely save your files. Its drive is pathetic -- suitable only for backups, and the connection to it using USB2 is horribly slow.
    You have a Mac Pro now. Put another "real" drive in a bay there, and enable File Sharing. Save your files there. (Gigabit Ethernet with Jumbo frames recommended.)
    As long as you have an Apple Base Station hosting your network, you can even allow the Mac Pro to sleep and use "Wake on Demand" to wake it for Sharing.

  • ITunes library xml from windows to mac using external drive.

    Hi there!
    I'm a newbie on mac computers.. I've recently purchase a macbook pro retina.
    So, I used to use iTunes in windows XP. My old computer crashed and I can't re-open it and save files...
    Now, the only file I have from my windows library is an "library.xml" file.
    The mp3 files that I had in previous iTunes playlists are in my external I: Drive. (not in Itunes folder).
    I was searching in apple communities to see how I can transfer playlists in my new iTunes on mac.
    But I can't find a solution to my problem... and unfortunately I don't know if there is...
    I've try to set the iTunes media folder location my external hard drive, from Preferences-->Advanced-->iTunes media folder location.
    Then I go to file-->library--> import playlist and I open the "library.xml".
    The result is that I have all my playlists in tact, like it was in my previous iTunes.... But THERE IS NOT ANY FILE ON THEM!!!
    So, I have only the playlists... Could you help me to set my I: drive as default path of itunes library, to get my playlists WITH the mp3s?
    PLEASE HELP!
    Thank you in advance.

    Should I change the Preferences-->Advanced-->iTunes media folder location back to default folder?
    That should be set to wherever you want iTunes to store media in the future (though it sounds like you are planning on keeping this unchecked anyway).  It has no effect on where iTunes looks for existing files.  That is already determined when you first add the file to iTunes or through later consolidating.
    In theory you should be able to start iTunes with a blank library, use the import function to add that .xml file and it should still point to the files on the external.  If that is not working then I guess it is possible all those %20 space designations may be causing problems.  It's strange you are seeing those coded that way but  it is likely some carry-over from Windows.  The purpose of adding a test file to the external, then adding it to iTunes, then looking at the .xml is to see how Mac iTunes lists the path for a file on the external added when using the Mac so you can use that as a model for changing other paths if necessary.
    Holding down the option key while starting iTunes (make sure you are using the correct key) or immediately after starting it should invoke a screen asking if you want to make a new library.  If this is not working for you then I have no idea why because it works for hundreds of other people I have told to do this.

  • Switching from PC to Mac - Using External Drives

    Hi,
    I have Lightroom 5 (Creative Cloud) and currently use a Windows 7 32 bit Laptop and a 1TB external HDD (connected via USB2, designated as my 'G' Drive) that stores my LR Catalogues and the Library of Photos that LR has created.  I want to switch to a MacBook pro with 64 Bit OSX.  I have looked at other questions on this forum about switching, but I'm concerned that all my current LR catalogues point to this external G drive.  I plan to connect my MacBook pro to an external RAID drive via Thunderbolt, which will contain my 'Master' LR5 Catalogues and photo Libraries.  My Questions are :
    (1) Will I need to designate this drive to be a 'G' Drive - does Mac work that way ?  I don't want to have to go through the (prolonged) pain of finding all the photos manually !
    (2) How do I ensure that the Windows Hierarchy is 'replicated' on the Mac formatted RAID when it is transferred ?  I gather that Macs don't naturally store folders and files in this way.  Is there a particular App that facilitates this ?
    Thanks for your help,
    Regards,
    Mungo

    I Have the same issue did anyone answer your question ?

  • How can i force my mac book pro to use an external display

    how can i force my mac book pro to use an external display
    my screen is black

    What sort of adapter are you using?
    Clinton

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • My final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

    my final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me.  I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

    What did Apple tell you about what they did (or did not) find here?
    See if working on the main disk is any faster.
    USB2 is glacial, as I/O interconnects go.  And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too.  FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
    Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

  • I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items. Help.

    I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items.  What happened and how do I get my mac to rerecognize the device?!?!?

    Hi,
    Check Finder>Preferences>Sidebar, is it checked there to show external drives?

  • Full backup ( ~ 1 TB ) using external HD - speed USB vs. Firewire vs. eSATA  - what are relative speeds - how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)_

        Hi All,
         I'm trying to resume regular scheduled Full backup ( ~ 1 TB ) of drives using external HD (to allow off-site redundant backup storage) .
         What are relative speeds of USB vs. Firewire vs. eSATA ?
         I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
          ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
    Thanks

    Jim Bogy wrote:
    ...I suspect eSATA connection may be considerably faster … how to install eSATA on mid-2010 Mac Pro desktop ( dual hex-core processors)?
          ( The quicker and easier backup protocol is, the more likely one is to use it to backup on a routine repetitive basis.)
    Adding a USB 3.0+eSATA PCIe card, which The hatter mentions, is the best solution that I've found. See http://eshop.macsales.com/item/CalDigit/FASTA6GU3/. The card is not cheap, but the USB 3.0 works flawlessly (which can't be assumed; ask me how I know) and the eSATA connection allows booting from the connected drive. Grant Bennet-Alder's point about HD speed is important to consider; in addition, the size of the individual files being backed up and where on the backup disk they're going will affect overall transfer speed. For example, using the USB 3.0 connection on that CalDigit card going to a Toshiba 3TB external, the transfer rate for a big file (say a virtual machine file) from an internal SSD boot drive was about 145 MB/sec while a bunch of little files might drop to 30 MB/sec and both rates decrease as an inner partition on the external is used. All told, a nearly 700 GB backup took under 1.5 hours. Using a HD as the source added almost an extra hour, though a WD external was used for that. Using a WD green drive plugged into this http://eshop.macsales.com/item/NewerTech/FWU3ES2HDK/ with an eSATA connection took about 2.5 hours also, but that was bootable whereas the USB 3.0 connection is not.
    Another point to consider is that USB 3.0 is ubiquitous on PC's now so there's lots of price competition for externals; not so much for eSATA externals.

  • I am new to a MAC.  I have an external hard drive that I used with my Windows XP computer.  Can I reformat it

    I am new to MAC.  I have an external hard drive that I used with my former computer running Windows XP.  Can I reformat it to use with my new MAC?  If so, how do I do it?

    Yes you can. See the following:
    Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • External Firewire HDD causes hangs on my Mac Pro & HDD lag using finder

    External Firewire HDD causes hangs on my Mac Pro & HDD lag using finder.
    I have an 2008 Mac Pro 8 core 2.66hz, 10GB Mem, ATI HD4870 with 4 internal 1 TB Drives. I have 3 external HDDs (2 USB + 1 FW400). The 2 USB HDDs are for Time Machine and backups.
    The external FW HD is a 1TB bootable clone of my Internal 1 TB boot HDD.
    I have 2 problems ... somethimes when using finder or opening a folder, copying files, starting or quiting a program, I get the spinning beach ball that seems to hang the Mac.
    I power off the external FW HDD and everything starts to work. I get an error about the device going offline, I then power the FW HDD back on and all is good.
    It seems the external FW Drive tends to hang the system. It occurs pretty frequently.
    Any recommendations?
    The other issue is that when I use finder to go to a folder, I seem to have to wait for all these drive to spin up. You can hear them all start whirring.
    is there a way to remove that lag?

    If you recently moved to Snow Leopard you might look for new firmware for your external drive. I would also get DiskWarrior and run that on the external and consider programs like Drive Genius. You might also back it up and wipe it and restore the data. After that I'd consider looking at a new external.
    Sleeping drives that take time to spin up after waking....I'd like to learn how to stop that myself. Be sure the Energy Saver in System Preferences is set to not put drives to sleep when possible. Even then my drives will go to sleep and I have up to 6 external added at times and they take quite a while to all spin up. I've never found a way to prevent that.
    BTW...external USB drives on a MacPro? Really? Even for backup....

  • HT1452 I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I have a Toshiba Canvio 1TB external hard drive on my Mac. I've used it for 4-5 months with no problems, but now cannot add to it (I use it mostly for photo storage) to it. I can still access information previously added. Ideas?

    I cannot find this 300GB "Backup" in the Finder, only in the Storage info when I check "About This Mac".
    You are probably using Time Machine to backup your MacBook Pro, right? Then the additional 300 GB could be local Time Machine snapshots.  Time Machine will write the hourly backups to the free space on your hard disk, if the backup drive is temporarily not connected. You do not see these local backups in the Finder, and MacOS will delete them, when you make a regular backup to Time Machine, or when you need the space for other data.
    See Pondini's page for more explanation:   What are Local Snapshots?   http://pondini.org/TM/FAQ.html
    I have restarted my computer, but the information remains the same. How do I reclaim the use of the 300GB? Why is it showing up as "Backups" when it used to indicate "Photos"? Are my photos safe on the external drive?
    You have tested the library on the external drive, and so your photos are save there.  
    The local TimeMachine snapshot probably now contains a backup of the moved library.  Try, if connecting your Time Machine drive will reduce the size of your local Time Machine snapshots.

  • My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

    My mac won't recognize an external monitor. The screen Goes Blue Once, then goes blue again and the second monitor just turns off. I am using an HDMI adapter to a visio TV. I also have my xbox on the tv. Can anyone Help??

    Lol, figured out the first part. Just for those who may be searching, when you click on the Display Preferences, and click on the arraingment tab... it not only shows where your two screens will be displayed, but the WHITE BAR at the top of one screen is the dock/toolbar. Click and hold to grab this and just slide it over to the screen you'd like it to be on.
    You have to release it IN the screen box, not on top of it... and it should pop right over to the new (or old) screen. At any rate, you can put the dock on either (or any) screen that you prefer.
    I am thinking of ordering more of these. Lol. 3 monitor setup seems like it would be crazy good.
    Still looking for the answer to keeping the new 16" screen on the right without switching between screen #s with that... not expose... Lion feature.
    Thanks. Hope my other question has an answer out here.
    Paul H

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • Backing up photos on iMac using external hard drive and time machine

    How do i back up photos from my imac using an external hard drive and time machine
    Thanks in advance

    Apple explains how to use Time Machine in http://support.apple.com/kb/ht1427.
    Setting up and using TM is very simple to do, connect any external HD (format as Mac OS Extended (Journaled) using Disk Utility ) and your computer shoudl ask if you want to use that EHD for a Time Machine backup. If you have any questions visit your local Apple Store or reseller and they can answer how to setup and use TM and also should be able to offer suggestions on EHDs. My personal preference is OWC (www.macsales.com) Mercury Elite Pro due to the build quality and OWC's level of support.

Maybe you are looking for