In Desperate need for help with Security Settings

I am currrently working on a project that requires a Flash
submenu running through an HTML Browser window and running from a
CD. The problem is that the final destination for these CDs will be
on computers without the capability to connect to the internet. So,
when the user gets the popup requiring them to change the security
setting in order to use the flash element, which is through the
internet (the dumbest way of doing this) they have no choice but to
decline the popup and therfore cannot use the flash submenu.
Is there a way to automatically be trusted whitiout the use
of the internet "security settings" window???????? If anyone from
Adobe/Macromedia read this please be advise that this should really
change to be computer based and not requiring an internet
connection.
If this is esay enough to change, I regret everything that I
am thinking of about Adobe/Macromedia at the time I writing this.
and please acceot my apologies.
If not, well.....
Thanks for anyones help.

When Exporting, you get the option of setting the Local
Playback security (very bottom of the Export dialogue box). Have
you checked to make sure you have yours set to "Access local files
only"?
What is the submeu trying to access that would cause the
sandbox warning?

Similar Messages

  • IN DESPERATE NEED FOR HELP flashing question mark appears MacBook

    Hello everyone, I got this White MacBook Mac OS X 10.4.11 yesturday I was updating limewire and iTunes, I was downloading some songs from Limewire when all of a sudden my macbook frozed. I was not able to do a thing. Not even minimizing nor quiting the app nor even opening another aplication, so I decided to shut it down by holding the power button until it shut down (about 8 secs). So I restart my macbook and I got this grey=blank screen whit a flashing question mark on it. I've tried EVERYTHING on this link http://support.apple.com/kb/TS1440?viewlocale=en_US even these one http://support.apple.com/kb/HT1533 and all I was able to accomplish, was to hold the mouse (/trackpad) button to eject a Cd, and while pressing Shift during startup (in order to start in Safe Boot mode) all I get is this lock image and this space to type a password. I've tried typing every password I know and I can't fix my macbook. Can anyone please help me out on this one?

    It means certain system files needed for startup are corrupted. You will have to reinstall OS X. If your hard drive is unaffected you can try the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Need some help with Mail settings

    I need some help on what mail settings to use. Basically I want my Mac's Mail.app synced with my iPhone's mail.app and everything on the gmail server to be archived and have it so that i do not need to download all the archived emails that are on gmail to either mail.app, if anyone could help it would be appreciated.

    You are not alone. I can't get mail to work with our exchange server no matter what I do. I set Entourage up in less than 2 minutes by entering some simple information. I am using the latest versions of Leopard and Mail and it just refuses to connect.
    For instance, in Entourage I entered my user name, password and the exchange server name and that was it. Got my mail and it works great. Mail wants to know the SMTP server name? What SMTP server? No matter what information I put in that field it gives me an error saying it can'tr connect to the SMTP server. That is because it is an exchange server not an SMTP server I guess. Also, even when I enter the exact same information as I did with Entourage, mail refuses to connect with it saying to "check the connection". The connection works fine, as Entourage is having no problems sending or receiving mail. With Entourage there is a LDAP setting but no where in Mail can you enter what the LDAP server is. At least is doesn't use that terminology anywhere.
    What do you have to do to get Mail to work with an exchange server?

  • In desperate need for help - Lag spikes through a wired connection

    Hello. I've recently started experiencing random lag spikes. I have no idea what the cause of these could be. I've used this router for almost 2 yrs now and never ran into a problem. I've done extensive searches and updated my old firmware to the new one following the strict intructions. I've also been trying to figure out how to log my network to provide more information on my situation. I've downloaded kiwisyslogd but have no idea how to use it... Any help with that would also be greatly appreciated.
    -Tesm
    EXTRA INFO - I called my isp (cox) and they told me everything on their line is fine. I'm running on a 15mb line. Internet connection works and everything else is fine except for periodic lag spikes that really interupt my gaming and web browsing severly.
    router: wrt54g v2
    Firmware: DD-WRT v23 SP2 (09/15/06) std then reverted back to linksys latest firmware... still no solution.
    Tried isolating the router out of the equation. Connected pc directly to the modem and had no problems. Connected the router back in and lag spikes came back. Pc is connected through ethernet wire.
    Tried disabling windows wireless zero service - no help
    Pinging a game server i tested the lag at. No problems when I pinged the server with the router. But when I joined the server with the game. I experience the lag spikes. Could this mean its not my router? When I plug the modem directly to my pc this problem doesn't happen.
    PING 75.126.174.198 (75.126.174.198): 56 data bytes
    64 bytes from 75.126.174.198: icmp_seq=2 ttl=119 time=44.9 ms
    64 bytes from 75.126.174.198: icmp_seq=3 ttl=119 time=46.8 ms
    64 bytes from 75.126.174.198: icmp_seq=4 ttl=119 time=44.1 ms
    64 bytes from 75.126.174.198: icmp_seq=5 ttl=119 time=45.9 ms
    64 bytes from 75.126.174.198: icmp_seq=6 ttl=119 time=47.6 ms
    64 bytes from 75.126.174.198: icmp_seq=7 ttl=119 time=44.3 ms
    64 bytes from 75.126.174.198: icmp_seq=8 ttl=119 time=41.5 ms
    64 bytes from 75.126.174.198: icmp_seq=9 ttl=119 time=45.0 ms
    64 bytes from 75.126.174.198: icmp_seq=10 ttl=119 time=42.7 ms
    64 bytes from 75.126.174.198: icmp_seq=11 ttl=119 time=45.2 ms
    64 bytes from 75.126.174.198: icmp_seq=12 ttl=119 time=48.5 ms
    64 bytes from 75.126.174.198: icmp_seq=13 ttl=119 time=47.0 ms
    64 bytes from 75.126.174.198: icmp_seq=23 ttl=119 time=45.9 ms
    64 bytes from 75.126.174.198: icmp_seq=24 ttl=119 time=42.2 ms
    64 bytes from 75.126.174.198: icmp_seq=25 ttl=119 time=44.0 ms
    64 bytes from 75.126.174.198: icmp_seq=26 ttl=119 time=43.2 ms
    64 bytes from 75.126.174.198: icmp_seq=27 ttl=119 time=47.1 ms
    64 bytes from 75.126.174.198: icmp_seq=28 ttl=119 time=42.8 ms
    64 bytes from 75.126.174.198: icmp_seq=29 ttl=119 time=43.3 ms
    64 bytes from 75.126.174.198: icmp_seq=30 ttl=119 time=44.9 ms
    64 bytes from 75.126.174.198: icmp_seq=41 ttl=119 time=44.7 ms
    64 bytes from 75.126.174.198: icmp_seq=42 ttl=119 time=44.1 ms
    64 bytes from 75.126.174.198: icmp_seq=43 ttl=119 time=44.8 ms
    64 bytes from 75.126.174.198: icmp_seq=44 ttl=119 time=46.1 ms
    64 bytes from 75.126.174.198: icmp_seq=45 ttl=119 time=47.7 ms
    64 bytes from 75.126.174.198: icmp_seq=46 ttl=119 time=44.8 ms
    64 bytes from 75.126.174.198: icmp_seq=47 ttl=119 time=46.1 ms
    64 bytes from 75.126.174.198: icmp_seq=59 ttl=119 time=44.7 ms
    64 bytes from 75.126.174.198: icmp_seq=60 ttl=119 time=42.2 ms
    64 bytes from 75.126.174.198: icmp_seq=61 ttl=119 time=41.9 ms
    64 bytes from 75.126.174.198: icmp_seq=62 ttl=119 time=45.0 ms
    64 bytes from 75.126.174.198: icmp_seq=63 ttl=119 time=44.3 ms
    64 bytes from 75.126.174.198: icmp_seq=64 ttl=119 time=45.5 ms
    64 bytes from 75.126.174.198: icmp_seq=65 ttl=119 time=45.1 ms
    64 bytes from 75.126.174.198: icmp_seq=77 ttl=119 time=47.1 ms
    64 bytes from 75.126.174.198: icmp_seq=78 ttl=119 time=48.7 ms
    64 bytes from 75.126.174.198: icmp_seq=79 ttl=119 time=45.9 ms
    64 bytes from 75.126.174.198: icmp_seq=80 ttl=119 time=45.5 ms
    64 bytes from 75.126.174.198: icmp_seq=81 ttl=119 time=48.7 ms
    64 bytes from 75.126.174.198: icmp_seq=82 ttl=119 time=44.1 ms
    64 bytes from 75.126.174.198: icmp_seq=83 ttl=119 time=43.5 ms
    64 bytes from 75.126.174.198: icmp_seq=92 ttl=119 time=46.7 ms
    64 bytes from 75.126.174.198: icmp_seq=93 ttl=119 time=44.8 ms
    64 bytes from 75.126.174.198: icmp_seq=94 ttl=119 time=45.8 ms
    64 bytes from 75.126.174.198: icmp_seq=95 ttl=119 time=47.0 ms
    64 bytes from 75.126.174.198: icmp_seq=96 ttl=119 time=42.3 ms
    64 bytes from 75.126.174.198: icmp_seq=97 ttl=119 time=45.6 ms
    64 bytes from 75.126.174.198: icmp_seq=98 ttl=119 time=42.6 ms
    64 bytes from 75.126.174.198: icmp_seq=99 ttl=119 time=42.3 ms
    64 bytes from 75.126.174.198: icmp_seq=107 ttl=119 time=43.6 ms"
    system:
    Thermaltake Amor Case
    AMD Opteron 165 Dual Core CPU
    EVGA nforce4 SLI Motherboard
    Hitachi 250GB SATA2 Hard Drive
    OCZ EL Platinum 1GB CAS 2 RAM
    EVGA 7800GTX Graphics Card
    Sunbeam NUUO 550Watt Power Supply

    which game server are you trying to connect to ??  did u try forwarding ports for that game server ?? do u have any firewall running on the computer??

  • Need to encode project tonight need some help with compressor settings!

    Hi have the export file for a feature (PAL DV origination in FCP) 75minutes in length, need to encode a DVD asap, will be burning to a single layer DVD.
    Can someone please tell me what bitrate etc to put for optimum quality in compressor as we need to do a last minute screening tomorrow night off the DVD. Once again if someone could tell me the optimum settings for playback that would be great, we need the best picture quality we can get.
    Also once i've encoded it in Compressor do i need to do anyting to the BITRATE settings in DVDSP??
    All help would be appreciated as we need to screen tomorrow.
    Cheers
    Karan

    Karan:
    The best settings are different from different projects. The best starting point is using the DVD: Best Quality 90 min (4:3 or 16:9 depending your footage) setting and encode video to MPEG2 and audio to Dolby 2.0 (AC3).
    Import the MPEG2 and AC· files in DVDSP and they are ready to build. If you encode your assets using Compressor you don't worry about DVDSP encoding settings.
    Hope it helps !
      Alberto

  • Need some help with security sandbox stuff asap please

    hey guys... so im trying to do a swfLoader call to a swf on a server from my actionscript on my local machine, when i do that i get the security sandbox violation error.... i tried adding a crossdomain.xml file to the server that has the following code in it
    <cross-domain-policy>
         <site-control permitted-cross-domain-policies="master-only"/>
         <allow-access-from domain="*"/>
         <allow-http-request-headers-from domain="*" headers="SOAPAction"/>
    </cross-domain-policy>
    and in my actionscript on application initialize i do
    initialize="init(); Security.loadPolicyFile('http://myServer.com/crossdomain.xml')"
    i also do
    Security.allowDomain("http://myServer.com");
    any ideas???? oh and i also went to this website http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml and set the always allow trust locations to "/"
    any ideas on how i could possible fix this problem?? ive been trying to get around this problem for the last 2 days!!
    please help!!!!

    Hi,
    Please use policy file logging to check the exact error. This should shed some light on the problem.The procedure is detailed here.
    http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_05.html
    Nishad

  • In desperate need for help on Gingerbread upgrade

    I have an unrooted D2 Global and tried to upgrade to 2.3 yesterday. I did download this stupid update but it just wouldn't install. The install bar would stop at 20-30% and then reboot, and then tell me the upgrade fail. I downloaded the patch for over 6 times already. I tried clearing the cache and everything else. I didn't try SBF as I don't think that's necessary yet.
    Could anyone help me solve this problem?Thanks a lot!
    I am thinking about going back to iPhone after this one. My experience with Android has compelled me to stay away from this danger software.

    JCJCJCJ wrote:
    Thanks any ways.
    This seems a risky buisness.
    Never did I know upgrading a phone or remove an preloaded garbage on a phone I paid $$ for would be so hard.
    Perhaps, I can just SBF the phone to 2.4.330 and then see if that flush all the wrong files out. 
    You just answered your question, you rooted and removed bloatware and now your device isn't stock and this is why the update will not load, it detects that you changed your device and wont install..
    By the way you do know that the method you used to remove the apps voids warranty and breaches Verizon TOS....
    The method to resolve this should be located at the location you received the unauthorized software, no disrespect but it may be wise to research what you are doing to your device before modifying it in this method because you can not get support on the Service Providers site when they do not support the method.
    Just something to consider...  Google is your best solution...

  • Help with security settings please?

    I just downloaded HP 8500 wireless software and each time I start up the macair, i get an error message about an incorrect security setting. Where does one find this setting and change it?

    When you searched Google for "iPhone Error 21" what did you find?

  • IN DESPERATE NEED OF HELP WITH CODE...

    I HAVE DONE EVERTHING CORRECTLY: TABLE DROP SEQUENCE CHECKED, ALL SYNTAX WERE ALSO CHECKED AND SPELLING WERE ALSO VERIFIED... BUT I AM STILL HAVING PROBLEMS... HERE IS THE CODE....
    THANKS....
    set pause on
    spool output-file
    echo on
    rem Asfa Taitt
    rem Project2
    drop table T_ENROLL;
    drop table T_SECTION;
    drop table T_STUDENT;
    drop table T_INSTRUCTOR;
    drop table T_COURSES;
    drop table T_SCHOOL;
    drop table T_MAJOR;
    create table T_ENROLL (
    Semester Char(7),
    Course Char(7),
    Sec_No Char(4),
    Student_No integer,
    GOS Char(1),
    Major char(4),
    foreign key (Student_No) references T_STUDENT,
    foreign key (Course) references T_COURSES,
    foreign key (Sec_No) references T_SECTION,
    foreign key (Major) references T_MAJOR);
    create table T_SCHOOL (School char(4) not null,
    primary key (School));
    create table T_MAJOR (Major char(4) not null,
    School char(4),
    primary key (Major),
    foreign key (School) references T_SCHOOL);
    create table T_STUDENT (Student_No integer not null,
    Student_Name Char(20),
    Major char(4),
    primary key (Student_No),
    foreign key (Major) references T_MAJOR);
    create table T_INSTRUCTOR (Instructor_No integer not null,
    Instructor_Name Char(20),
    School char(4),
    primary key (Instructor_No),
    foreign key (School) references T_SCHOOL);
    create table T_COURSES (Course Char(7) not null,
    MAX_Allowed Integer,
    Credit_Hours Integer,
    GOA Char(1),
    primary key (Course));
    create table T_SECTION (semester Char(7),
    School char(4),
    Course Char(7),
    Sec_No Char(4) not null,
    Sec_Loc char(5),
    Section_Time char(13),
    Instructor_No integer,
    primary key (Sec_No),
    foreign key (Instructor_No) references T_INSTRUCTOR,
    foreign key (Course) references T_COURSES,
    foreign key (School) references T_SCHOOL);
    insert into T_COURSES values ('IFSM410',30,3,'R');
    insert into T_COURSES VALUES ('CMIS300',30,3,'R');
    insert into T_INSTRUCTOR values (111223333,'BABISKIN ROBERT G');
    insert into T_INSTRUCTOR values (222997777,'CODD TED E');
    insert into T_SECTION values ('SPR01','BUS','IFSM410','4031','RM32','TUTH3:30-5:00',111223333);
    insert into T_SECTION values ('SPR01','ENG','CMIS300','4011','RM407','MWF 1:30-2:30',222997777);
    insert into T_STUDENT values (222445555,'HARRIS JOHN H');
    insert into T_STUDENT values (215557777,'LITTLE BOB K');
    insert into T_STUDENT values (517443333,'JONES JANE G');
    insert into T_ENROLL values ('SPR01','IFSM410','4031',222445555,'R','IFSM');
    insert into T_ENROLL values ('SPR01','CMIS300','4011',215557777,'R','CMIS');
    insert into T_ENROLL values ('SPR01','CMIS300','4011',222445555,'R','IFSM');
    insert into T_ENROLL values ('SPR01','CMIS300','4011',517443333,'R','CMIS');
    insert into T_ENROLL values ('SPR01','IFSM410','4031',517443333,'R','CMIS');
    DELETE from T_ENROLL
    WHERE T_ENROLL.Student_No = 222445555 and T_ENROLL.Course = 'IFSM410';
    alter table
    commit;
    select * from T_INSTRUCTOR;
    select * from T_COURSES;
    spool ofF

    Try this.
    Rob
    -- First we need to define some tablespaces
    DEFINE idxtbs='idx01'
    DEFINE datatbs='data01'
    -- There is more then one way to skin a cat. You can disable all the constraints
    -- in these tables, then drop them.
    spool x
    Select 'alter table ' &#0124; &#0124; table_name &#0124; &#0124; ' drop constraint ' &#0124; &#0124; constraint_name &#0124; &#0124; ';'
    from user_constraints
    where table_name in (T_ENROLL;
    ,T_SECTION
    ,T_STUDENT
    ,T_INSTRUCTOR
    ,T_COURSES
    ,T_SCHOOL
    ,T_MAJOR);
    spool off
    @x.lst
    host del x.lst
    -- Now drop your tables
    set pause on
    spool output-file
    echo on
    rem Asfa Taitt
    rem Project2
    drop table T_ENROLL;
    drop table T_SECTION;
    drop table T_STUDENT;
    drop table T_INSTRUCTOR;
    drop table T_COURSES;
    drop table T_SCHOOL;
    drop table T_MAJOR;
    -- I changed all the chars to varchar2, this is much better form
    -- notice the addition of tablespace, freespace and storage
    create table T_ENROLL (
    Semester Varchar2(7),
    Course Varchar2(7),
    Sec_No Varchar2(4),
    Student_No integer,
    GOS Varchar2(1),
    Major varchar2(4)
    tablespace &datatbs
    pctfree 30
    pctused 70
    storage (initial 1M next 1M pctincrease 0)
    create table T_SCHOOL (School varchar2(4) not null)
    create table T_MAJOR (Major varchar2(4) not null,
    School varchar2(4)
    tablespace &datatbs
    pctfree 30
    pctused 70
    storage (initial 1M next 1M pctincrease 0)
    create table T_STUDENT (Student_No integer not null,
    Student_Name Varchar2(20),
    Major varchar2(4)
    tablespace &datatbs
    pctfree 30
    pctused 70
    storage (initial 1M next 1M pctincrease 0)
    create table T_INSTRUCTOR (Instructor_No integer not null,
    Instructor_Name Varchar2(20),
    School varchar2(4)
    tablespace &datatbs
    pctfree 30
    pctused 70
    storage (initial 1M next 1M pctincrease 0)
    create table T_COURSES (Course Varchar2(7) not null,
    MAX_Allowed Integer,
    Credit_Hours Integer,
    GOA Varchar2(1)
    tablespace &datatbs
    pctfree 30
    pctused 70
    storage (initial 1M next 1M pctincrease 0)
    create table T_SECTION (semester Varchar2(7),
    School varchar2(4),
    Course Varchar2(7),
    Sec_No Varchar2(4) not null,
    Sec_Loc varchar2(5),
    Section_Time varchar2(13),
    Instructor_No integer
    tablespace &datatbs
    pctfree 30
    pctused 70
    storage (initial 1M next 1M pctincrease 0)
    -- enable all your primary key and foreign key constraints seprate from creating the table.
    --t_enroll needs a primary key. always have a primary key.
    alter table t_enroll add constraint t_enroll_pk primary key (id)
    using index tablespace &idxtbs
    -- the alter table add constraint takes the form
    -- add constraint <constraint_name> foreign key <column name> references <tablename(column name)>
    alter table T_ENROLL add constraint t_enroll_fk1
    foreign key (student_no) references
    t_student(student_no)
    --do the same for the rest of your foreign keys.
    insert into T_COURSES values ('IFSM410',30,3,'R');
    insert into T_COURSES VALUES ('CMIS300',30,3,'R');
    insert into T_INSTRUCTOR values (111223333,'BABISKIN ROBERT G');
    insert into T_INSTRUCTOR values (222997777,'CODD TED E');
    insert into T_SECTION values ('SPR01','BUS','IFSM410','4031','RM32','TUTH3:30-5:00',111223333);
    insert into T_SECTION values ('SPR01','ENG','CMIS300','4011','RM407','MWF 1:30-2:30',222997777);
    insert into T_STUDENT values (222445555,'HARRIS JOHN H');
    insert into T_STUDENT values (215557777,'LITTLE BOB K');
    insert into T_STUDENT values (517443333,'JONES JANE G');
    insert into T_ENROLL values ('SPR01','IFSM410','4031',222445555,'R','IFSM');
    insert into T_ENROLL values ('SPR01','CMIS300','4011',215557777,'R','CMIS');
    insert into T_ENROLL values ('SPR01','CMIS300','4011',222445555,'R','IFSM');
    insert into T_ENROLL values ('SPR01','CMIS300','4011',517443333,'R','CMIS');
    insert into T_ENROLL values ('SPR01','IFSM410','4031',517443333,'R','CMIS');
    DELETE from T_ENROLL
    WHERE T_ENROLL.Student_No = 222445555 and T_ENROLL.Course = 'IFSM410';
    alter table
    commit;
    select * from T_INSTRUCTOR;
    select * from T_COURSES;
    spool ofF
    null

  • WRT310N: Help with DMZ/settings (firmware 1.0.09) for wired connection

    Hello. I have a WRT310N and have been having a somewhat difficult time with my xbox 360's connection. I have forwarded all the necessary ports (53, 80, 88, 3074) for it to run, and tried changing MTU and what-not.
    I don't know if I have DMZ setup incorrectly, or if it's my settings.
    Setup as follows:
    PCX2200 modem connected via ethernet to WRT310N. 
    The WRT310N has into ethernet port 1 a WAP54G, and then upstairs (so that my Mother's computer can get a strong signal) I have another WAP54G that I believe receives its signal from the downstairs 54G. 
    In the back of the WRT310N, I have my computer connected via ethernet port 3, and my Xbox 360 connected via ethernet port 4.
    Now, I first figured I just have so many connections tied to the router and that is the reason for being so slow. However, when I unplug all the other ethernet cords and nothing is connected wirelessly, except for my Xbox connected to ethernet port 4, it is still poor. Also, with everything connected (WAP54G and other devices wirelessly) I get on my PC and run a speedtest.  For the sake of advice, my speedtests I am running on my PC are (after 5 tests) averagely 8.5 Mbps download, and 1.00 Mbps upload, with a ping of  82ms.
    Here is an image of the results:
    http://www.speedtest.net][IMG]http://www.speedtest.net/result/721106714.png
    Let me add a little more detail of my (192.168.1.1) settings for WRT310N.
    For starters, my Father's IT guy at his workplace set up this WRT310N and WAP54G's. So some of these settings may be his doing. I just don't know which.
    "Setup" as Auto-configurations DHCP. I've added my Xbox's IP address to the DHCP reservation the IP of 192.168.1.104. This has (from what I've noticed) stayed the same for days.
    MTU: Auto, which stays at 1500 when I check under status.
    Advanced Routing: NAT routing enabled, Dynamic Routing disabled. 
    Security: Disabled SPI firewall, UNchecked these: Filter Anonymous Internet Requests, Multicast, and Internet NAT redirection.
    VPN passthrough: All 3 options are enabled (IPSec, PPTP, L2TP)
    Access Restrictions: None.
    Applications and Gaming: Single port forwarding has no entries. Port Range Forwarding I have the ports 53 UDP/TCP, 88 UDP, 3074 UDP/TCP, and 80 TCP forwarded to IP 192.168.1.104 enabled. (192.168.1.104 is the IP for my xbox connected via ethernet wired that is in DHCP reserved list)
    Port Range Triggering: It does not allow me to change anything in this page.
    DMZ: I have it Enabled. This is where I am a bit confused. It says "Source IP Address" and it has me select either "Any IP address" or to put entries to the XXX.XXX.XXX.XXX to XXX fields. I have selected use any IP address. Then the source IP area, it says "Destination:"  I can do either "IP address: 192.168.1.XXX" or "MAC address:" Also, under MAC Address, it says DHCP Client Table and I went there and saw my Xbox under the DHCP client list (It shows up only when the Xbox is on) and selected it.  
    Under QoS: WMM Enabled, No acknowledgement disabled.
    Internet Access Priority: Enabled. Upstream Bandwith I set it to Manual and put 6000 Kbps. I had it set on Auto before, but I changed it. I have no idea what to put there so I just put a higher number. 
    Then I added for Internet Access Priority a Medium Priority for Ethernet Port 4 (the port my xbox is plugged into).
    Administration: Management: Web utility access: I have checked HTTP, unchecked HTTPS.
    Web utility access via Wireless: Enabled. Remote Access: Disabled.
    UPnp: Enabled.
    Allow Users to Configure: Enabled.
    Allow users to Disable Internet Access: Enabled.
    Under Diagnostics, when I try and Ping test 192.168.1.104 (xbox when on and connected to LIVE), I get:
    PING 192.168.1.104 (192.168.1.104): 24 data bytes
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    --- 192.168.1.104 data statistics ---
    5 Packets transmitted, 0 Packets received, 100% Packet loss
    Also, when I do Traceroute Test for my Xbox's IP, I just keep getting: 
    traceroute to 192.168.1.104 (192.168.1.104), 30 hops max, 40 byte packets
    1 * * * 192.168.1.1 Request timed out.
    2 * * * 192.168.1.1 Request timed out.
     As for the Wireless Settings, it is all on the default settings with Wi-Fi Protected setup Enabled.
    To add, I have tried connecting my modem directly to the Xbox and my connection is much improved. I have no difficulty getting the NAT open, for it seems my settings are working for that. Any help with these settings would be VERY much appreciated. 
    Message Edited by CroftBond on 02-18-2010 01:09 PM

    I own 2 of these routers (one is a spare) with the latest firmware and I have been having trouble with them for over a year.  In my case the connection speed goes to a crawl and the only way to get it back is to disable the SPI firewall.  Rebooting helps for a few minutes, but the problem returns.  All of the other fixes recommended on these forums did not help.  I found out the hard way that disabling the SPI Firewall also closes all open ports ignoring your port forwarding settings.  If you have SPI Firewall disabled, you will never be able to ping your IP from an external address.  Turn your SPI Firewall back on and test your Ping. 
    John

  • Help with PAL settings for Sequence

    Hi –
    I’m having some issues with a PAL project and need some help with the right sequence settings. I have 3 camera angles that are all PAL that I am trying to edit together in a multi-clip sequence and everytime I add anything to the timeline I am getting the red render bar. I've tried all different PAL settings but nothing is working. Here are the specs of the DV clips:
    Frame Size : 720 X 576
    Vid Rate – 25 FPS
    Compressor DV-PAL
    Data Rate – 6.9mb/sec
    Pixel Aspect – PAL – CCIR-601
    Audio 48Khz
    Aud Format – 32bit – Floating Point.

    From the menu bar: Final Cut Pro > Easy Setup. What setting is selected there?
    From the menu bar: Sequence > Settings. What setting is selected there?
    In both cases they should be set to DV PAL.

  • I'm suddenly in need of help with my Firefox browser (6.0.2)

    Hi there,
    I'm suddenly in need of help with my Firefox browser (6.0.2)
    (OS: I use Windows XP).
    When I open up the browser, all I see is a completely blank white screen, with all the toolbars at the top.
    I know that my physical connections are fine: I've tested the modem, turned the pc off and on etc. and I can also receive/send emails.
    This problem started today, 8th September, 2011 and has never happened before.
    Is it a coincidence that Firefox updated itself just before I logged off yesterday evening? Could it be something to do with this particular new update?
    I've also noted that just before I "open up" Firefox, I now get a small box saying:
    [JAVASCRIPT APPLICATION]
    Exc In Ev handl: TypeError: This oRoot.enable is not a function
    This has never appeared before - I hope it offers a clue a to what is wrong.
    The Browser is not stuck in Safe Mode, by the way.
    Obviously, I can't search for any solutions to the problem on the internet, as I can't physically see any websites!
    (A friend is sending this query on my behalf from their pc)
    Any light you could throw on this confusing problem would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.
    If the only option is to uninstall Firefox and reinstall it from your site, then I'm also in trouble (I can't see the internet or make any downloads).
    In that case, would you be able to send the .exe file as an attachment to my email address? If so, please let me know and I'll give you further details.
    Many thanks in advance.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Need some help with putting a folder in users directory

    I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
    Can any one help me out?
    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// looks for directory for list
                        "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                    } catch (Exception exc) {
                        File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Program Files/xxx/",// used only if the directory didn't exist
                            "xxxxxxxxxxxxxxxxxxxxxxx"));

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • Help with Secure Erase

    I need help with Secure Erase 7-pass in the utility disk. It keeps getting stuck at 25% and a pop up comes out saying not enough memory in the start up disk. Can someone tell me whats going on? After the pop up come on the erase will not proceed.

    Hello,
    moving files from your computer
    You can delete files, folders, and other items on your disk that you no longer need.
    You may want to store a backup copy or an archive of important items if you are trying to clear space on your hard disk for other things.
    Drag the items to the Trash (at the end of the Dock).
    Any files or folders you drag to the Trash remain there until you empty the Trash. If you change your mind about something, you can still retrieve it from the Trash if you haven't emptied it yet. Click the Trash icon to open the Trash window, then drag items back to your home folder.
    Choose Finder > Empty Trash.
    Even after you empty the Trash, deleted files may still be recovered by using special data-recovery software. To delete files so that they cannot be recovered, choose Finder > Secure Empty Trash. Files deleted in this way are completely overwritten by meaningless data. This may take some time, depending on the size of the file. To prevent the recovery of files you deleted previously, open Disk Utility (in Applications/Utilities), choose Help > Disk Utility Help, and search for help on erasing free disk space.
    If an item is locked, you cannot put it in the Trash. Select the item and choose File > Get Info, then deselect the Locked checkbox in the General pane. If you do not own the item, you may need to provide an administrator's name and password to put the item in the Trash.
    Press the Option key when you choose Empty Trash to prevent the warning message from appearing. You can also turn off the warning in the Advanced pane of Finder Preferences.
    Also... using the Erase Free Disk Space button:
    Erasing free disk space
    When you delete files by emptying the Trash, Mac OS X deletes the information used to access the files but doesn't actually delete the files. Although the disk space used by deleted files is marked as free space, deleted files remain intact until new data is written over them. Because of this, deleted files can be recovered.
    You can use Disk Utility to erase the "free" space used by deleted files by having zeros written over the space once, seven times, or 35 times. If you have a lot of free space on your disk, overwriting the free space several times can take a long time.
    Erasing free disk space does not erase the other files on your disk.
    In Disk Utility, select the disk or volume in the list with the free space you want to erase.
    Click Erase, then click the Erase Free Space button.
    Select an option, then click Erase.
    After the process begins, you can interrupt it without harming your data.
    You might see a message saying that you are running out of disk space, but you can ignore that warning. When this operation is complete, you will have the same amount of free space as you did when it started.
    You can also erase free space when you empty the Trash in the Finder. Choose Finder > Secure Empty Trash.
    Carolyn
    Message was edited by: Carolyn Samit

  • I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my

    I need your help with a decision to use iPhoto.  I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them.  I have used ProShow Gold to create slideshows.  I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years.  Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge.  180GB plus.
    I now have a Macbook Pro and will add an iMac when the new models arrive.  For my photos, I want to stay with Photoshop which also gives me the Bridge.  The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows.  What am I missing and is using iPhoto worth the effort?
    If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient.  If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward.  However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto.  In the past, I have experienced syncing problems with, and database errors in, large databases.  If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
    Some guidance and insight would be appreciated.  I have a number of Faces questions which I will save for later. 

    Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
    Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
    Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
    For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
    Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
    The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
    Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
    The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
    Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
    When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
    These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
    So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
    So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

Maybe you are looking for

  • Can't Print B&W Only With Samsung CLP-300N

    I recently purchased an iMac to replace my XP CD. I've been a Windows XP user for a while, and had a Samsung CLP-300N attached to my network. I was able to fine-tune the printer driver settings (quality, number of copies, bw/color, etc) in Windows XP

  • Can anyone help? I'm losing my mind over this

    On 13th September, I called BT to advise them of a house move.  They took my new address, agreed a switch over date of 31st October and sent me an acknowledgement with an order number (BTCM0ZZ04*********). On the 24th October, they told me the previo

  • Formatting dynamic texts

    Hi, in SmartForms I use dynamic texts to output information in the form. It works fine but I have to format some of them for a smaller or bigger font. SAP does not give any possibility to set the paragraph and/or character formats like in the case of

  • Runtime Exception - Need Help

    Hi I have a simple BPEL process to test the exception handling. It basically consists of a Invoke to call a EJB and a catchAll around the invoke. If there is an exception due to the Target EJB not available , the catchAll catches the exception, but i

  • Fruitmenu replacement?

    After a long period of silence from Unsanity it is not clear whether there will be a Leopard compatible version of APE/Fruitmenu. Does anyone know of a suitable replacement that reproduces the old Apple menu? Or has anyone seen an applic that dynamic