In Details of Monitor screen,why do we have Reconstruct process?

Hello All
Can anyone helpme out
In Details tab of monitor screen,generally we have
Requests
Extraction
Transfer
Processing
Subsequent Processing and
Datastore activation.
But here additionally we have
Reconstruct
Process chian
Other?
Why do we have this additional 3 process
Reconstruct
Process chian
Other?
Actually from R/3 we are loading to 2 targets
1.ODS
2.Cube
Its a Full Upload.
and version is BI 7
Regards
Balji

Hi Balaji,
1. If you Reconstruct the Request from Manage screen of your Data Target,You will get the Reconstruct node in the Monitor screen.
2. If the load Process is running through Processchain you will get Processchain node.
3. Others is for ODS Activation.
-Vijay

Similar Messages

Regarding Updation of data in the detail tab of Monitor screen

hai
I got error in loading the data.
I modified it in the PSA level.
I will update that datapackage 'manually' in the detail tab of the monitor screen.
Like that , i have 15-error datapackage and i modified them . Then how can i update all 15-datapackages at a time in parallel ????
Upto my knowledge , there is a funcation called
Monitor screen->edit->init.update->settingforfutherupdate...
Then i need to selct the "packet should be processed in background"
SO i dont know all of them ....
pls tell me preperly
i ll assogn the points
bye
rizwan

hi Rizwan,
try to update again entire PSA,
rsa1->psa->locate your psa, and right click,
there are option 'immediate' and 'schedule in background'.
hope this helps.

I have very thin, colored lines running vertical on my desktop monitor screen. I don't know where they come from or how to get rid of them. I started with one and now have three. Can anyone give me some insight about what to do in getting rid of them?

I have very thin, colored lines that have shown up on my IMac monitor screen. I don't know where they came from or how to get rid of them. I'm concerned now because I started with one and now have three. Does any know why this occurs or how to get rid of them?

I got an address from Applecare, although I can't place my hand on it right now. I didn't bother persuing the letter route myself as I didn't expect much. I know that the location was Cork, Ireland though as that where the UK Applecare is based as far as I'm aware. The best thing to do is to call Applecare (if it's free) and discuss the issue. State that you are not happy wit the fact that you will have to pay to have the problem resolved especiiay if it is an ongoing problem that has not been resolved. I ended up speaking to a senior manager of the Applecare team who then proceeded to tell me about mailing in my grievence to customer services division or something like that.
If I can find the address I may post it if I'm allowed.
In the case of age, Schools usually have a 5-year life-cycle as they tend to be used differently than consumer machines, i.e. being used constantly on a daily basis for at least 12 hours with no break. you would expect issues to appear after a few years, but I expect problems that arise through defects to be resolved and stay resolved. As I mentioned we had machines for around 2 years before the lines appeared and sent them to be repaired. I'm happy with that. What I am unhappy about is the fact that the problem has reappeared exactly in the same way and now I'm left with around 7 machines that I either pay loads to repair or, the more likely replace the machines with newer ones since the age is now big enough to warrant the replacement.
Sorry for the lengthy moan, but these are the reasons I purchased Apple ahrdware in the first place to avoid the "not our problem" stance some PC vendors usually take, similar to the Dell monitors thread mentioned in here somewhere.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Traffic light in RF monitor screen (LRF1) - how it is derive from?

Hi,
This is a question about WM-RF. My question is how does the system determine the traffic light color in the RF monitor screen (LRF1). I read the SAP help portal and compare it to the screen and it still doesn't make any sense out of it..
On the SPRO, there is DEFINE QUEUE table, with thefollowing setup:
WS--QUEUEQName-CapacUsed-CapacUsed----AccessLim
110--B01_GEN-GenName610--
2StrictLimitation
Thus the relation is: 6/10 = 0.6
Next, I went to LRF1 and saw this record with warehouse 110, and Queue B01GEN, and having the following value_:
QUEUE -
TOs--LOADProc.By--
Propotion
B01_GEN----150.0002--
Green
Thus the relation is: 15/2 = 7.5
Why is it green? SAP help portal give the following explaination, and I don't know to derive it?
A- The queue tranffic light is green if the relation is less than the value given in the left relation field.
B - The queue traffic light is yellow if the relation is greater than or the same as the value specified in the right field.
C - The queue traffic light is red if the relation is greater than or the same as the value specified in the left relation field.
Please share if you know.
Thanks..Tuff

Hello,
Does anyone know my question?
Appreciate some help here.
Thanks,
tuff

Refreshing the monitor screen

Hi all,
I have an application built using
CVI 5.5 where some where
at the middle of the operation the
program will call another program to lauch. After the called program has
exit, my application will continue.
My problem is that when the called program has exit, the whole monitor
screen become white and I can't anything.
Is there some way I can refresh the
screen in CVI ?
Thankz in advance.
MK. Tan

Hello Tan,
The screen should not turn white when your called application exits. I would be suspicious that the called application is not terminating properly. Check to see if the OS has become unstable or locked up (move the mouse, press ALT-TAB, press Num Lock, press Ctrl-Alt-Del, and see if the system responds). I assume that you are using system() to execute this program synchronously. You could call fprintf() then fflush() directly after system() to write to a file to check if your program continues to run after the called program exits. If you restart and the file does not contain the marker, then you can be sure that the called application is not exiting cleanly. If you can give us more details on the application you are calling and the state of your syste
m after it exits, we might be able to help you further. Also, does this behavior occur when the program is being debugged, a release executable, or both?
Jeremiah Cox
Applications Engineer
National Instruments
http://www.ni.com/ask

Error Message - in Monitor Screen

Hello ,
In the monitor screen i am seeing the error
Data Package X : arrived in BW ; Processing : Data packet not yet processed
Update PSA / Transfer rules / Update rules / Processing end OK .
I am seeing Update ( 0 new / 0 changed ) : Errors occurred .
I checked the other forum stuffs and came to know i need to process the data package manually .
Is it correct .
What about the other data package data .
I mean if i do it manully the other data is updated to target and the request turns green .
And the total data of all the data package i can see in the target
I checked the dumps already nothing is there .
Edited by: Rahul Rai on Apr 6, 2009 5:22 PM

Yes you can try to load the data manually package by package...
For manually loading the data do the following:
Go to RSMO for your request
Go to menu Edit -> Init. Update -> Setting for further update -> Package should be processed in the background
Then under the Details tab, go under Transfer (IDocs and TRFC), right click on each data package and select 'Manual Update'.
This will need to be done for each data package...the request will turn green once all the data packages are processed
Hope this helps,
Sita.
Edited by: Sita Pulavarti on Apr 7, 2009 11:20 AM

How do I print only the text on the monitor screen?

I would like to be able to print only that portion of a text that is on the monitor screen. How do I do that?
I have an Epson Workforce 325 printer, and an HP desktop computer PC

Please see the following to print only the text portion of the web page. I am assuming you wish to print just the text & not the ads or additional irrelevant items to avoid wasting ink.
See:
[[Printing a web page]]
'''If this solved your issue, please select ''solved ''& chose the appropriate ''solution'' to close this ticket/question posting'''.

I have an iphone 4s why does it have a black screen instead of my background picture when I get a text message?

I have an iphone 4S why does it have a black screen instead of my background picture when I get a text message?

When you see the old number come up in the suggested choices look for a blue arrow to the right of the Contact. Tap the blue arrow and then tap Remove from Recents.

EHP1 Upgarde Monitor screen resolution problem in a support message

Hi Experts,
We have recently upgraded our Solution manager to EHP1, iam facing a screen resolution problem with 15 inch monitors.
Our key users have 15 inch monitors to their system and when they try to reply a support message under transaction data-> Overview tab -> reply it is showing only one line for them , due to which they are unable to enter the complete data in it.
How ever We have found that this does not occur with 17 inc monitors as the required screen resoution 1280* 1024 is possible due to bigger size of the monitor.
can any one suggest how to make the overview tab visible completely with small resolution monitors.
Thanks
Nanda

>
Nanda Kishore wrote:
> Hi
>
> There is an note from sap on this issue i couldnt remember the note number which talks about updating your package levell
>
> Kindly check this note it was released in SEP 09 a very recent one. this will resolve your probelm.
SAP Note 1351673 Size of containers not changed for support messages
Best regards,
Ruediger

My monitor screen scrolls up and down on its own by it's self? How do I stop it?

How do I fix a monitor screen scrolling up and down on its own?

Sabrasam,
Thank you for your quick reply.
I want you to try a factory reset on the monitor if you haven’t attempted one already.
1.       Press the Menu down in the bottom right corner of the monitor.
2.       Once the on screen display appears toggle down to factory reset.
3.       Select on that option
You might see your monitor go dark a couple times but that is normal. Test it out after the reset.
If I have been helpful or if you'd like to say thank you for me trying to help, click the white star under my name to give me Kudos. I really appreciate it.
Please respond at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Detailed pop up screen in selection screen - urgent

hai experts,
how can we give a detailed pop up screen in selection screen.
My requirement is,
To display Details of spool Nos taken for current porogram to take print out from end user.
from OWN SPOOL REQUEST displays all other programs........
can any one give a right solution?
reward will avail for use full answer.
thanks in advance.
regards,
jai.m

Hi Jai
May be you can use this FM POPUP_WITH_TABLE_DISPLAY_OK with the list of spool number populated into internal table.
If you are particulary looking for selection screen, then decalre your selection screen as below
Selection-screen begin of screen 9000.
Selection-screen end of screen.
Then use the statement Call selection-screen 9000 starting at x y.
Hope this helps !
Regards
Ranganath

How to i get my one line email address from a form to dissapear from my monitor screen?

Hi,
I have a iMac running OS X Yosemite ver 10.10.1
my iMac is Mid 2011, running 16 BF Ram
I have seen an annoying floating email address from a form showing up on my monitor screen, even though the form was closed.
Even if I move any open windows, the email address is still showing on my screen.
Anyone have any idea on how I may delete this image or whatever it is? Thanks. Donna

Try relaunching the Finder,  ➙ Force Quit.
Otherwise reboot.

2014 Mac mini doesn't scale the entire HP Envy 32 monitor screen

I recently purchased a HP Envy 32 monitor for use with my 2014 Mac mini with the Iris display. I get 2560x1440 resolution at 60 Hz on both the DP (1.2) as well as the HDMI ports (using the auto-detected HP Envy 32 color profile) but the display doesn't scale the entire screen of the monitor. Is anyone else using this configuration successfully? If so, what have you done to make full use of the 32" monitor real-estate? I simply cannot find any options in Display preferences (Yosemite) to change underscan options or for that matter within the monitor itself. Is there a particular display profile or driver I can use to fix this issue?

I'm using a 4K compatible DP cable connected to the Thunderbolt port and getting to the max resolution of the monitor. So I don't think the issue lies there. I was able to use SwitchResX trial mode to discover an underscan option that allowed me to scale to the entire monitor screen. Assuming SwitchResX is manipulating core OSX functions, I'd assume there is some display related configuration within OSX that I should be able to tweak in order to scale the monitor screen natively in OSX without requiring any 3rd party software. Any thoughts for how to go about tweaking the display natively?
Thanks

Ports for Macbook Pro to monitor screen

I just bought a Macbook Pro 2 Ghz i7, 15" laptop and it doesn't seem to have connections(ports) to a separate monitor screen, what can I do?
Thanks!
Frank

Your MBP has a Thunderbolt port for external video connections. You can connect an Apple Thunderbolt Display to it with a Thunderbolt cable, or any other display using a mini-Displayport adapter to whatever sort of connection your monitor offers: VGA, DVI or HDMI.

In Details of Monitor screen,why do we have Reconstruct process?

Similar Messages

Maybe you are looking for