In DFS, How to make servers LEAST COST for different subnets.
Hello, We setup DFS in our domain (SERVER1) and we replicated the DFS namespace into a server which is also a member of the domain but it is on a DIFFERENT SUBNET (let's call this server SERVER2).
How can I make sure that the SERVER2 DFS redirection should NOT go to SERVER1 unless SERVER2 is down, etc.? or How do we make sure SERVER2 clients don’t go to the wrong site and vice versa WHEN we enable DFS on multiple systems?
I have also enable least expensive target selection (site-costing) in DFS but I am not sure if that will work.
Note: SERVER2 is not a Domain Controller
SERVER1 is Server 2008 Standard
SERVER2 is Server 2008 R2 Standard
Please help and Thank you in advance.
Regards,
Rod
--- Network Security Administrator
Dear Mandy,
I have run the command DFSUTIL /PKTINFO on SERVER2 Client's computer and seems like it is referred
to SERVER1 DFS namespace targets.
Namespace Referrals is set to Lowest cost.
Here is the output of the command:
C:\>DFSUTIL /PKTINFO
1 entries...
Entry: \Jessel.local\SysVol
ShortEntry: \Jessel.local\SysVol
Expires in 0 seconds
UseCount: 0 Type:0x1 ( DFS )
0:[\filesv02.Jessel.local\SysVol] AccessStatus: 0 ( ACTIVE TARGETSET )
1:[\FILESV03.Jessel.local\SysVol]
DfsUtil command completed successfully.
Please advise.
Thank You very much.
Rod Lopez
--- Network Security Administrator
Similar Messages
-
How to make a single payment for different open items with same due date
Hi,
I have created a payment method and selected "Payment per due day " option in payment method company code settings.
Even I have selected that option, Payment will not happen grouping for the items with same due date
for ex : I have two open items with one due date and another open item with another due date so when I am trying performing F110 system should make a single payment for the item with same due date and seperate payment for another item.
But system making single payment for all items
Could you please suggest anything how to make a seperate payment with due date.
Regards
VK GUPTAHi,
Please check Vendor Master data: FK02 ->company code data -> Payment transaction accounting: unflag 'individual payment'.
Make a test and let me know if it's okay.
regards -
How to make the delivery cost changeable after cancellation of GR?
Create a PO (with Delivery cost), then GR (101) , then cancel the GR (102), but the delivery cost still cannot be modified eventhough the GR has been cancelled - how to make the delivery cost changeable after cancellation of GR?
Hi
"You are not allowed to add new delivery costs in a purchase order once goods receipt has been carried out as these would then be proposed in the invoice verification. The related posting to the clearing account for goods receipt and invoice receipt would not then balance, if no further goods receipt took place.
After the invoice has been received successfully, it is not possible to change the delivery costs in the order. This is because information necessary for problem-free operation is no longer available for the delivery costs that have already been posted for subsequent reversals or invoices, or the operation can no longer be done without errors.
It is also not possible to change delivery costs for stock transfers with SD shipping after goods have been successfully issued, as this can lead to errors during cancellation."
I think you have to delete the line item and create a new line item with revised delivery conditions..
MRao -
How to make a good referencing for my web site
hi. i start with muse and would like to know how to make a good referencing for my web site; thanks for your answers...
Google and search the forum for: SEO or Search Engine Optimisation
-
My iPod 5th generation iOS 8 32bytes is not bringing me to my home screen and is unresponsive, and gives me the constant apple logo each time I try to turn it on. My iPod is out of warranty, so I was wondering how much money would it cost for me to return my iPod back to Apple for a new one?
Apple does not have a trade-in program. You can either try and restore your iPod, or you can try and sell it yourself. In some locations, Apple does provide for a recycling program, but the amount provided for devices is quite low.
-
How to make saved IR available for all users
Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM -
How to make warehouse field inactive for all users in all documents autom.
Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh AgrawalHi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue. -
How do I make a photo folder for different event on ipad2?
How do I make a photo folder for different event on ipad2?
These links may be helpful.
How To Create Photo Albums http://tinyurl.com/cxm4eoq
How to Add New Albums in the Photos App on the iPad & Add Photos to the Album
http://tinyurl.com/7qep7fs
Cheers, Tom -
How to make jar files availabe for deployed EJBs
Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar to the
classpath, but I think that shouldn't be the way. Is there somthing in the admin
console to make jars available or do I have to insert it in the ear file? And
if so, where do I hve to place it?
Thanks
ClaudiaPut the util.jar in the ear with your ejb jars - at the same level (i.e. in
the root) - but do not include them in the manifest.xml.
Also each ejb jar that refers to util.jar must have util.jar on its internal
classpath in the manifest.
"Claudia" <[email protected]> wrote in message
news:3d537db5$[email protected]..
>
Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar tothe
classpath, but I think that shouldn't be the way. Is there somthing in theadmin
console to make jars available or do I have to insert it in the ear file?And
if so, where do I hve to place it?
Thanks
Claudia -
How to make a group contacts for iphone 4s, How to make a group contacts for iphone 4s
How to make a group contacts for iphone 4s
Or there are apps
https://www.google.co.uk/url?sa=t&source=web&cd=3&ved=0CEEQFjAC&url=https%3A%2F% 2Fitunes.apple.com%2Fgb%2Fapp%2Ftext-2-group-fast-sms-imessage%2Fid519077434%3Fm t%3D8&ei=WCkfUc6vE8THtQavlYCoBw&usg=AFQjCNHnoWUqJ9AMYWCadVceOkq-6Ed4Vg -
How to make the logs captured for Z fields in ME21N/ ME22N
Hi
I have devloped new tab(Screen) and added Z field in the PO header (ME21N) as per my requirement. But whenever I do changes to the perticular Z field, logs are not captured (ME21N->ENVIRONMENT-->HEADERLOG). How to make the logs captured for Z fields like standard fields. Is there any way?
Regards
Raj.HI Ranjitha
For the data element of Z fields go to further caracteristics of tab and make change document checkbox ticked. -
Slide duration - How to make one slide have a different duration to another slide?
Slide duration - How to make one slide have a different duration to another slide?
EG So one slide has 2 seconds, another 4 another 6
All I can see is how to make all slides have the same duration
Any help very much appreciated!
BrianSlide durations are not changeable on a slide-by-slide basis.
-
How to make a portlet unvisible for another(not Owners) Users?
Hi all,
I (Site-Owner) have create a little Portal-Site with any portlets.
I want to make one or two portlets(Admin-Area) unvisible for other users. But when I create a portlet as Site-Owner, then all another users can they see.
How to make a portlet unvisible for another users?
Regards
Leonid PavlovYou can hide and show portlets of Web providers (OmniPortlet, Web Clipping, and Java portlets) on portal pages dynamically. This functionality is controlled by security managers. The PDK provides a number of security managers. For example:
o Group security manager: The group security manager makes the portlet appear to users who are members of a specified group, while hides the portlet for those who are not members.
o Authentication level security manager: You can use the authentication level security manager to control access to the portlets based on the users authentication level. For example you may hide the portlet from public users, but display it to authenticated users.
In addition to the security managers provided by the PDK, you can build your own security managers.
Although OmniPortlet and Web Clipping do not expose security managers through the user interface, you can apply them by editing their XML provider definition file.
For PL/SQL portlets you can use the is_runnable method to control whether the portlet is hidden or shown.
Peter -
How to make a loop run for specific period of time ?
hello !
i'm new to labview and could'nt found how to make a loop run for 2 sec for example, and then to exit.
Solved!
Go to Solution.Hi Hookso,
You can do it using the different loops like While loop and For Loop. Roderic has already stated how to do it using a for loop. I have illustrated in the attached vi how to do it using a while loop and Elapsed Time function. Take a look.
Regards,
Nitzz
(Give kudos to good Answers and Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi 36 KB -
How to make custem sized book for example 12inch x 8 inc, 18 inch x12 inch
how to make custem sized book for example 12inch x 8 inch, 18 inch x12 inch
I'm afraid there is no way to do this currently available.
Maybe you are looking for
-
Illustrator CS5 will not print full file
I'm trying to print drawings made in autocad that were modified in illustrator, when I go to print the file ends up stoping halfway through the page. This is infrequent, some times files work and sometimes they don't, aswell often times when files do
-
Assign G/L Account to Accounting Document on Invoice Posting
HI Experts, Sorry if this had been asked already in many forums, I am new to FI Configuration. How does the posting in Invoice determine which G/L Accounts are posted in the Accounting Document? How is it being configured and where should it be maint
-
Infotype 0002 record being created with language 'Z1' and not 'EN'
Approximately 50% of our Infotype 2 records exist with the language field value as 'Z1'. This wasn't captured manually, and our config is set up for 'EN'. Please advise how this could have occured.
-
Passing parameters from one channel to another
Hi, I was wondering if it is possible to pass parameters or values from one channel to another, for ex. through JSP, etc. Thanks, Pablo
-
When I access the Scrabble game, the whole grid does not appear.
Changing the screen resolution does not help. This is a new problem, as I have been able to play Scrabble on the Pogo site for years.