In doubt... will upgrading to OS-10.5 stop Golive CS2 from working?

Hi, it's been such a long time since we discussed this... I still use Golive CS2, as well as Photoshop CS2 sometimes to use the plug'ins that are not compatible with CS4. Will upgrading to the latest OS give me any trouble with those apps?

>OS X Snow Leopard may be the end of the line for GL If the dont bundel it with rosetta
...And since the best program is the one you know and GL is the only one I know (a little), I might have to stick to the current OS for the next twenty years or so...   or say for at least two years after the new one is released, until forced out as usual.

Similar Messages

  • Will upgrade to mac pro 2010 give huge improvement from mac pro 2006?

    I asked in an earlier post but may not have been clear. Basically, if I upgrade to a new mac pro 2010 quad core 2.8 GHz (12GB ram) will it give me a huge improvement from a mac pro 2006 2.0GHz (with 5GB Ram) and thus reduce the need to render and the time it takes to render? My thoughts are that it will because the graphics card is much more powerful and has more memory and hence any FXplug effects will have better RT playback. Is this a correct assumption?
    Or is this too difficult to quantify. Is it simply "You will see an improvement but..."
    I mainly edit 1080 25p Pro Res.
    Thanks

    Further test has astounded me. I installed my copy of Premiere Pro CS4 on the core i3 iMac. I don't use it on my Mac Pro. I only bought it for Encore CS4 (I had an old copy of Premiere from Windows that I used to upgrade).
    I copied an avchd card to the iMac desktop. I opened the media in Premiere Pro cs4 and played it back at Highest Quality: it was smooth as butter even with transitions. There were 47 minutes of footage that I added to the timeline and exported out as AIC 1080 50i. This took 2 hours 20 minutes!
    I know that this is far from the ideal: ie editing source files from desktop and rendering to the desktop on the system drive (something I would not normally do, but I did not have an FW800 external drive available). I don't like PPro to edit with and was using to compare to my Mac Pro.
    The same clips card were on my internal raid 0 on my Mac Pro. I loaded them onto the timeline in Premiere Pro and it struggled at preview quality and the render to an external esata drive was showing in excess of 15 hours!
    I am amazed. But this raises questions for me too. The core i3 is a 3.06 GHz cpu (hyperthreading but no turbo boost) and shows as four cores (two real, two virtual) in activity monitor. They were at 310% when playing back the avchd files. If I get the 2.8GHz Mac Pro there will be eight cores and turbo boost. Will this be faster than the core i3 in playing back footage and much faster in rendering? Or does the higher clock speed of the i3 mean that for editing it is better but will lose out to the Nehalem Xeon when rendering?
    Translating these finding to an FCP context, might this mean that a rewrap of the avchd to h.264 for editing in FCP is possible? In some cases this might be preferable to transcoding.
    I cannot get over how much better the core i3 performance is over the Woodcrest Xeons. This makes me wonder if the Nehalem Xeons are as good if not better?

  • Will a blown battery stop my phone from working properly? only half loads on startup screen then crashes!

    Blackberry curve 8520 pearl

    Hello,
    Well, I think it depends on what you mean by "blown". Blown up? Overheated and expanded? Or just no longer functioning good, with no visible signs of any damage?
    Any of those can indeed cause this situation. To test, you need a known good identical battery to try in your BB. Likewise, an identical BB without problems, to use your current battery in. The results of this test will indicate if the problem indeed is your battery, or something else about your device itself.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • 10.3.9 - Will upgrading to 10.4 help me catch up with the rest of the world

    I have a 1.25 gHz, 17" iMac running 10.3.9 with 512 MB of RAM.
    My problem is that the world seems to be moving away from me.
    More and more websites say my Flash version is too old for them; YouTube tells me my browser is no longer supported to name but two of the problems I now face. As far as I know I have the latest version of everything (Flash, browser etc.) that will run on 10.3.9.
    I gather the latest OS my Mac can run is 10.4.11. Assuming I can track down a copy cheap, will installing it resolve some of these type of issues?
    The thing is, I'm a bit anxious about upgrades generally. From my modest experience, I've found that every time you do it you fix one bug and introduce six more which then starts you on a costly spiral of software purchases and hours and hours of setup headaches and learning curves in order to get you back where you started. I've spent a long time getting my system working in harmony with my various external devices and if it were down to me I'd just leave it alone. But sadly the world won't let me.
    I realise this is a policy thing from the software industry, but for folk like me for whom cash is tight it's frustrating. I'm happy to live without new features - I just don't want to lose old ones.
    So will upgrading make any difference at all to my issues or should I stay put?
    Any thoughts or advice gratefully received.

    Here's the spec page on your iMac. http://www.everymac.com/systems/apple/imac/stats/imac1.25_17fp.html It's capable of running Tiger 10.4 or Leopard 10.5.
    Here's the Tiger & Leopard requirements.
    *OS X 10.4 Tiger Requirements*
    http://docs.info.apple.com/article.html?artnum=301341
    *Mac OS X 10.5 Leopard installation system requirements*
    http://support.apple.com/kb/TA24950
    Either OS will run on 512MB RAM, but would run better with 1GB RAM. Tiger will probably be OK for another year or so, then you may begin to have the same problems you are experiencing with Panther. I made the Panther to Tiger upgrade on a G4 desktop & G3 laptop without problems.
    Tiger & Leopard install DVDs are in short supply and are no longer available at the Apple Store *but may be available for $129 by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*. For other sources for Tiger, do a Google search for MA453Z/A (10.4.6), MA190Z/A (10.4.3) and M9639Z/A (10.4) . Also look on eBay. Be sure & buy a retail version (black with silver X) and not a model specific version (gray) (See Can I use another Mac's system restore disc on my Mac? ).
    Also check these web stores: http://www.lacomputercompany.com/cgi-bin/rpcart/index.cgi?command=dispitem&type= sku&sku=19521 http://www.allmac.com/shop/index.php?cPath=5_10003
    Possible Alternative if you are currently using Panther 10.3 – Do a Google search for Tiger 10.4 Upgrade DVD . It will upgrade your 10.3 to 10.4, but it doesn’t contain the full retail Tiger installer. Should be cheaper than the retail Tiger install DVD.
    After you install the base 10.4.x, update to the final Tiger version 10.4.11. Here's the link for the 10.4.11 combo update http://support.apple.com/kb/TA24901?viewlocale=en_US
    Look at this link Mac OS X v10.4 Tiger Installing Software Support Page
    http://www.apple.com/support/tiger/install/
    You can also download the Tiger Installation and Setup Guide
    http://manuals.info.apple.com/en/TigerInstall_SetupGuide.pdf
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    When you upgrade the OS, do it via Archive & Install. See About the Archive and Install feature http://support.apple.com/kb/HT1710
    Be sure to select Preserve Users & Settings. Also, repair permissions before and after the install.
     Cheers, Tom

  • Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?

    Hi,
    Did some preliminary searching on this before posting but couldn't find with confidence my answer. Does anybody know? Details below.
    Q: Will upgrading to Snow Leopard affect my Windows 7 boot camp partition?
    I'm running 10.5.8 on a single drive with two partitions. 1st partition for OS-x is extended (journaled), 2nd partiction (ntfs) has solid version of Windows 7 RC, build 7100 running.
    Thanks.

    Hi Michael,
    here are some nice 'Myths and Facts' about Intel Macs and BootCamp http://refit.sourceforge.net/myths/
    Bottom line: while not exactly needed for installing Windows on an Intel-based Mac, the BootCamp Assistant 'streamlines' the process with a nice GUI (no need for 'cryptic' Terminal commands).
    Mac OSX as of now (10.5 Leopard and above) plus the uptodate firmware for Intel-Macs already include everything needed to install and boot Windows.
    Deleting or reformating an OSX partition does not affect the Windows partition.
    However a repartitioning of course does, if the Windows partition is on the same harddisk.
    But even a repartitioning of any other harddisk (ones that not have the Windows partition on them) does not affect the Windows partition.
    Did that myself when adding/upgrading the harddisks in my Mac Pro.
    Nonetheless, when 'fumbling' with harddisks and partition structure I always have backups of my important files at hand.
    Take care
    Stefan

  • I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

    I run Tiger OSX on one MacBook and SnowLeopard on another. Photos were downloaded from Tiger to SnowLeopard, and now iPhoto won't open on the Tiger Mac. Will upgrading iPhoto fix this problem?

    What matters is the version of iPhoto you have on the different machines. Can you tell us what they are, and what exact error message you get.
    Regards
    TD

  • Will upgrading to osx mountain lion upgrade my Logic Pro 9.1.6 to 9.1.7?

    I wanna know if upgrading m computer to osx mountain lion will upgrade my Logic Pro to it's current update to 9.1.7.
    I wanna upgrade to the new osx im worried if it will update all my software as well

    First, you can (and should) always back up your copy of Logic before updating, that way you can always go back to the earlier version if you need it.  If you do that you might as well update to the latest version of Logic.
    Going to 10.8 won't update Logic, but you'd probably want to update Logic (and most other apps) to the newest versions if you do a major OS update like that.

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • Will upgrading from Tiger 10.4.11 to Snow Leopard delete programs?

    Sorry if this is a stupid question or answered a million times before, but will upgrading from Tiger 10.4.11 to Snow Leopard stop my existing programs (PhotoShop, Office etc) from running? I've got an Intel MacBook but I've never installed a new OS myself, so any tips gratefully received! Thank you.

    You will lose the ability to work in any Classic OS applications that ran under system 9.
    If I were you, before upgrading do yourself a favor and purchase an external hard drive that you can "clone" your Mac to. If possible, a large enough drive that you can have 2 partitions. In one you would clone your current system and apps. Then after the upgrade, clone again your updated system to the other partition as a emergency backup.
    With the clone of your current set up, if need be you can rebbot to it so that you can use any of your "old" applications.

  • Re: Firefox no longer works with Mac OS X 10.5, will upgrading to Lion, OS X 10.7, help with this issue?

    I cannot upgrade my Mac to Mountain Lion, OS X 10.8 and cannot buy a new Mac so will upgrading from
    OS X 10.5 to OS X 10.7 help with this issue?

    If you are going tob e upgrading to 10.7 you should be able to just upgrade, and then install future updates of Firefox with no problem.

  • Will upgrading ram improve speed in Mac and windows (VMware fusion)?

    I Am using VMware fusion for music production and that program requires a lot of workspace. I have a MacBook Pro 4gb ram and when I turn VMware on it goes to 2 gb ram in Mac and 2 gb ram in windows. My Mac speed is normal when VMware fusion is turned off but when I turn it on my Mac is very slow. Will upgrading ram improve speed in mac and also in windows (windows is also very slow)
    Btw my english isn't very good 

    Adding RAM only makes it possible to run more programs concurrently.  It doesn't speed up the computer nor make games run faster.  What it can do is prevent the system from having to use disk-based VM when it runs out of RAM because you are trying to run too many applications concurrently or using applications that are extremely RAM hungry.  It will improve the performance of applications that run mostly in RAM or when loading programs.
    In your case it will most likely help. You should plan on at least 8 GBs or more, depending upon what your model supports.

  • HT1338 I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

    I have iMac 105.8 and want to upgrade to Snow Leopard, so got the disc from apple on line store and it will not install, just keeps ejecting from my desktop

    You have entirely too little free space on the boot drive, for best performance it's best to have hard drives only 50% filled max and never more than 80% filled.
    See Storage Drive here and reduce some space also make a seperate bootable clone backup of all your data BEFORE upgrading
    Most commonly used backup methods
    see here for how to find your disk space
    Why is my computer slow?
    If you upgrade and it doesn't go right or slows the machine down you might need to erase and install, which all your programs will have to be reinstalled from original sources and files from backup.
    How to erase and install Snow Leopard 10.6
    If you can't do this, then hire a local PC/Mac specialist.
    Do not upgrade to 10.7 or 10.8 on that older machine, it will slow down and you will lose all your PPC based programs.
    Leave the Lions for a brand new machine with a SSD drive.

  • HT4906 i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

    i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

    What version do you have?
    iPhoto menu -> About iphoto.
    What goes to your iPad/iPhone is controlled in iTunes.
    Regards
    TD

  • I need some1 to help me on ow i will upgrade 6.1 on my palm

    pls some 1 should help me on ow i will upgrade 6.1 on my palm
    Post relates to: Pre p100eww (Sprint)

    Sorry, I have no idea what you are asking.  You list your device as a Pre, and "6.1" has no relevance at all...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Will upgrading to new version of itunes delete my last iPad backup?

    will upgrading to a newest version itunes delete my last iPad backup? I am currently running 10.5.0.142 and just installed iOS6 to my iPad2 and was prmpted to do a restore.  Only problem is ituntes says I can't sync up my back up until I install the newest version of itunes.

    no, updating versions does not delete your current library

Maybe you are looking for

  • I have followed all suggestions. Still can't fix the problem. After an update, my profile seems to be blocked.

    My Toshiba laptop went through 45 updates, and now when I open Firefox (where ALL my bookmarks live) the program freezes after a few minutes. I get error messages about my profile, and errors about Firefox already running. I tried the suggestions abo

  • Broken Unicode

    Never thought I would have a problem with unicode, but here it is. The web site I am working on is ColdFusion MX7 and mySQL 5.0.45. The data in the DB is UTF-8 encoded, collation is set to utf8_general_ci. The output of the data from DB is valid, all

  • Inserted value too long ...

    Hi, I tried to migrate a VARCHAR2 (2000) column into an other VARCHAR2 (2000) column in an other database. I get the error message "Inserted value too long ..." length (source) = 1998 The target database has a Unicode character set. Could you help me

  • Asha 306 Not enough bandwidth

    When I try to stream you tube videos a message displays saying Not enough bandwidth, then operation failed. How can I rectify this?

  • Place Word table and apply defined formats in ID

    Hi, I have a Word file that contains text as well as tables. These tables are defined as table format in the Word file and I also have defined table formats in ID. Now I would like to place this Word file in ID and the table should automatically be f