In E-Rec once candidate is hired other recruiter should not hire the sameNA

hi experts,
In E-Recruitment eg if the candidate has applied against 2 job postings which is linked to requisition
so basically if he is attached to 2 requisitions ,if he is hired against requisition 1 by recruiter 1,how can we prevent recruiter 2 in hiring the same candidate
In short once candidate is hired we need to prevent other recruiters from hiring the same candidate.
Regards
RK

Hi RK,
Once a candidate is hired in to the system, the candidates data I.e Name, Pernr(incase of int.candidate), Org.unit, Position, Date of Hiring would no more be available in table T752F. Hence there is no question of another recruiter hiring the same candidate again.
If your question is about the two different recruiters shortlisting an Applicant for two different positions, the answer would be ensure process discipline. Ex: The recruiter before proceeding further with shortlisting activities can see the overall activities created including correspondence sent to the candidate in the candidate data overview page and proceed further with appropriate action.
Hope this answers your question.
Thanks
G Raj

Similar Messages

  • Some PDF files and other emails do not display the whole page. Is there a way to change that?

    Some PDF files and other emails do not display the whole page. Is there a way to change that?

    If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    Welcome to Apple Support Communities
    Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one

  • Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

    Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

    If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
    If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
    *Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
    *Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
    See "Import from another browser" and "Import from file":
    *http://kb.mozillazine.org/Import_bookmarks

  • HT5085 Have purchased Mumford and sons Sigh no more - order number MJ1GL4Zl7 on 15th Nov 2013. It has appeared on other devices - nut not on the main computer. I have tried repeatedly to download again - to no avail - help. V Hetherington

    Have purchased Mumford and sons Sigh no more - 15th Nov 2013. It has appeared on other devices - nut not on the main computer. I have tried repeatedly to download again - to no avail - help. V Hetherington

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
    What happens when you try to redownload it ? What you can redownload will show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes - does that album show there ? If music shows there but not that album then is it hidden : http://support.apple.com/kb/HT4919 ?

  • Vine.co can not watch videos on other browsers do not have the problem with firefox firefox there just did not work, delete cookies, history

    vine.co can not watch videos on other browsers do not have the problem with firefox firefox there just did not work, delete cookies, history

    I think this problem may be caused by Yahoo's changes making it incompatible with the klatest version of FireFox.
    This is suddenly affecting many many people who use Firefox and are members of Yahoo Groups. All these people say they themselves changed nothing and have not been locked out before when using Firefox. But suddenly, within the last week, they are.
    What did Mozilla do or what did Yahoo do to cause this problem? I can say that I was not blocking cookies and after trying a number of things to fix it, I went to Yahoo's home page and navigated to my group from here.
    This problem is not anything a user did. Either Firefox is at fault or Yahoo is. I want to know which company is at fault and when they are going to fix it.

  • Reload Router max. once/24 hr while other actions will run all the time within an EEM applet

    I have an EEM script which runs on a track when it goes down, within the actions i have different other things to check and take actions accordingly and they are working fine. I want to include a router reload within the same applet which should only trigger once within 24 hrs., no matter how many times the EEM runs during 24 hrs.
    Here is my current applet:
    event manager applet MyApplet authorization bypass
     event track 10 state down maxrun 3600
     action 1.0 cli command "enable"
     action 2.0 cli command "conf t"
     action 3.0 cli command "service internal"
     action 3.1 cli command "do test cellular 0 modem-power-cycle"
     action 3.2 cli command "no service internal"
     action 4.0 wait 720
     action 5.0 track read 10
     action 6.0 if $_track_state eq "down"
     action 6.1  cli command "int cell0"
     action 6.2  cli command "shut"
     action 6.3  cli command "controller cell 0"
     action 6.4  cli command "lte radio off"
     action 6.5  wait 60
     action 6.6  cli command "no lte radio off"
     action 6.7  cli command "int cell0"
     action 6.8  cli command "no shut"
     action 6.9 end
    At the end i want to add another wait of 10 sec. and check the track state again, if it is still Down I want to trigger a reload, but when router comes back after reload and my EEM triggers again, i don't want to reload if the last reload was triggered within last 24 hrs.

    The way you're using wait in this applet is not ideal.  It would be better, especially for the long wait, to have this broken up into multiple applets so that they can run asynchronously.  In fact, given what you want to do for this reload, that would be the better way to go.  If you configured a second applet at the end of this applet like:
    event manager environment q "
    action 7.0 cli command "event manager applet reload-countdown"
    action 7.1 cli command "event timer countdown 10"
    action 7.2 cli command "action 1.0 cli command enable"
    action 7.3 cli command "action 2.0 cli command $q config t$q"
    action 7.4 cli command "action 3.0 cli command $q no event manager applet reload-countdown$q"
    action 7.5 cli command "action 4.0 cli command end"
    action 7.6 cli command "action 5.0 cli command $q write mem$q"
    action 7.7 cli command "action 1.0 reload"
    Then you could have another applet that reacts to the tracked object coming up.  This applet would simply unconfigure the reload-countdown applet.  Thus, if the track comes back up, the reload will not happen.

  • Once payment received  for bill system should not allow to cancel

    Hi  Experts ,
    we have created  commercial  invoice  and posted to fi document and    payment  received  from party.but when  we  try to  cancel  the same billing document system allowing  to  cancel the document.So Client  requirement  is once  payment received from party system it  should not  allow to cancel the billing document.
    Please  give  your  valuable suggestions on the same ...
    regards...
    MM

    Hello,
    In the Tx VOFA for the billing type to be cancelled(Ex F2), please
    fill the field Copying Requirements(V_TVFK-GRBED_S) with '29'.
    This routine prevents the cancellation of the billing documents which
    have been cleared.
    Regards,
    Raghavendra YN

  • Rfq document once used as reference for po should not come in doc overview

    Sir,
    i want to create po with reference to rfq. the issue is that my client  daily creates30 po'swith reference to rfq. so once the rfq is adopted in po that rfq should not be seen in document overview. ONLY RFQ WHICH ARE NOT ADOPTED AS PO SHOULD BE SEEN IN PO DOCUMENT OVERVIEW.
    PLEASE HELP ME OUT SETTING THE PARAMATERS SO THAT USERS CAN ONLY SEE THOSE RFQ'S WHICH ARE TO BE CONVERTED INTO PO'S
    IT IS VERY URGENT
    THANKS
    Regards

    Hi,
    This can be done via user exit.
    EXIT_SAPLMEQUERY_001
    EXIT_SAPLMEQUERY_002

  • Other user can not see the data from the workbook

    Hi Friends,
    I created a workbook with some worksheets in a Business area. The owner of the workbook has no problem to view all the worksheets and get all the data returned.. I granted all the neccessary privileges to other users ,they could see the workbook, but no data returnd for the query results. Tried refresh the worksheet, same no data retrieved.Checked the SQL inspector and the plan, it showed the correct paths and execution plan without any errors there. The same query run in SQL plus by other users returned data correctly.
    By the way, I had a summary folder in the workbook. During the troubleshooting, I dropped this summary folder, still the same no data return for other users.
    Any body happen to know the cause or has some ideas on this issue?
    The discoverer administrator verson is 9.0.4.00 and the PLUS /Viewer is 9.04.45.02.
    Thank you very much,
    J.K

    Hi All
    The scheduling of reports, as you have probably noticed, requires that the scheduling privilege within Discoverer Administrator tool be granted to the user NOT to a role. Scheduling will not work if you attempt this. The reason for this is that these two SYS grants must go to a user:
    GRANT SELECT ON SYS.V_$PARAMETER
    GRANT EXECUTE ON SYS.DBMS_JOB
    The user will also need to have these grants:
    CREATE PROCEDURE,
    CREATE TABLE,
    CREATE VIEW,
    EXECUTE ANY PROCEDURE,
    UNLIMITED TABLESPACE on user's tablespace
    My new Discoverer 10g Handbook, which I would recommend to anyone working with Discoverer, explains scheduling in detail and even tells you how the tables and views that are used to store the results work. You won't find this information anywhere else, as you will see if you read some of the five reviews that have been left on Amazon.com. For more information about the book please look here:
    http://learndiscoverer.com/books/books.htm
    The PUBLIC grants are not having any impact. All these do is ensure that ALL users have the same basic privileges. You can just as easily grant these to any role of your choosing and it will work just fine.
    By the way, because the PUBLIC role is the MINIMUM privileges that a user can have you might want to consider reducing the end user Discoverer privileges afforded to PUBLIC. By default, all users can Create and Edit workbooks, share workbooks, save workbooks and so on. This is far too rich a set of privileges for the basic user, who in most cases will be a VIEWER user. Whenever I create a new EUL I always recommend that my client reduces the PUBLIC user's privileges and then create new roles for more advanced VIEWER and PLUS users, adding privileges as required.
    Thus, my basic VIEWER, aka PUBLIC, has only these privileges:
    Collect Query Statistics
    Item Drill
    Drill Out
    My advanced VIEWER has this additional privilege:
    Save Workbooks to Database
    My basic PLUS user has all of the above, plus these (pardon the pun):
    Create/Edit Query
    Create Link
    and my advanced PLUS users get everything, which means they now get these as well:
    Grant Workbook
    Schedule Workbooks
    I also remove the Save / Save As Actions link from Viewer which prevents the basic VIEWER users from knowing that it is there. In essence, because these users no longer can click the Save link and because they do not have the Save to Database privilege, they will not be prompted to save within Viewer no matter what they do. This now makes 10.1.2 Viewer work the same way as previous versions.
    Even though the Save link is not there, my advanced Viewer users will be prompted to save if they have made any changes. This therefore allows you to have two classes of Viewer, one who can save and one that cannot.
    I hope this helps
    Regards
    Micahael Armstrong-Smith

  • How can I rasterize a spot color file without creating "border" pixels between areas that are adjacent to each other but should not be overlapping?

    We use Illustrator to create circuit layouts. For part of our process, we create an image of all of the layers using spot colors to show the printed layers overlapping each other. We then rasterize the file and send the image through a Matlab routine that performs some analysis of the circuits based on the colors of the pixels.
    In some cases, I have created images with areas next to each other, but not overlapping. When rasterizing the image, the rasterizing process appears to treat the borders as overlapping and creates a single pixel wide border between the 2 areas when there is none. This is playing havoc with our Matlab routine.
    I can manually go in and remove the rasterized border, however on some projects, this is a very lengthy process. Has anyone experienced anything like this, or have any ideas on how to prevent this?

    Would align to pixel grid help?
    Left is not aligned, Right is aligned to pixel grid

  • I re-installed Firefox on my laptop; but other users did not get the program installed under their log-in; how do I fix this?

    I recently un-installed Firefox on my Windows Vista laptop; when I re-installed it, the program is only available to me (the administrator of the laptop); two other users are not able to use the program. I've tried "right-clicking" on the Firefox icon, clicking on Properties, then Security, and adding the two other users to the list, but after clicking on "apply" and then "OK", the other users still don't have access to the program. How do I fix this? Thanks!

    First and foremost, learn punctuation and capitalization so we can read what you're writing properly.

  • HT6378 I "upgraded" to iCloud Photo Library (Beta), my 2000+ pictures between my iphone/ipad has now become 85 photos.  Where are the other 1900 pictures--not in the deleted folder?

    I upgraded to iCloud Photo LIbrary (Beta) today but my 2000+ pictures have now become 85 pictures on the iCloud/iPhone & iPad.  The pictures are not in the deleted folder.  These "pictures" were NOT normal with prior IOS upgrades.  I could not delete them.  Where have all of these pictures gone?

    Ok, so here's a solution to this issue:
    Backed up my iPhone on iTunes
    Did a factory reset on iPhone
    Restored the thing from previous backup
    Re-entered all my passwords and such
    Now it's syncing again.
    The whole procedure took me about two hours.
    No idea why this happened. Beta, I guess.

  • Should not select the one prompts when selected the other prompt

    Hi,
    In one of the my requiments i have the following scenario.
    When a value from one prompt is selected it should not allow to select the any value from the previous prompt.
    I have multiple prompts in the Webi Report.
    E.g : when i select a value for the Product Lines prompt it shoud not allow me to select any value from the Product Groups.
    these two Prodult Line and Product groups are the two prompts in my reports.  
    How can this requirement can be implemented in BO XI R3 version.
    Need help on this?
    Regards,
    Kishore.

    Hi,
    thank you for the suggestion however new functionalities and improvement suggestions can be submitted at [https://ideas.sap.com] where users can vote for the idea. If you post the link to your idea here there are more chances that other people can see and vote it
    Thanks!
    Best regards,
    Simone

  • Two pages open, one is the page I am looking for and the other apoligizes for not finding the page. How do I get rid of this page?

    After I upgraded to Firefox 4, I open Firefox and my default home page comes up and so does a page that apologizes for not finding the page I am looking for. How can I get rid of this extra page when I open Firefox? I have Windows XP.

    Try resetting your homepage to the '''''one''''' that you want. <br />
    http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

Maybe you are looking for