In ear earbuds with remtoe

Can anyone recommend some in ear earbuds for the iPhone that have good quality, all of the iPhone functions that the original earbuds have (pause, answer calls) and maybe more for under $100? Thanks.

UB5 phones from Ultimate Buds are terrific. They're out of stock, right now, though and I've learned that they're redesigning them. They're supposed to go back on sale by Feb 09.

Similar Messages

I lost one of the earbuds for my Apple In-ear Headphones with Mic. Now what do It do?

I lost one of the earbuds for my Apple In-ear Headphones with Mic.
In case you don't see why this could be a big deal, let me remind you that these little earphones will run you $79 new. Naturally, I'm sure there's got to be a reasonable solution that another owner of these headphones may know of or can share with me.
Should I bring it to the Apple store or will they just laugh at me?
Basically, all I'm missing is the jelly-like in-ear bud on one side (which is easily replaceable; I just need to know where I can order GENUINE extras from).
Click here to see the Apple In-ear Headphones I'm referring to.

I've tried several and the best by far is the Sennheiser MM50 iP ($99 at the apple store). The sound is incredible, particularly the low frequecy response (bass). These are even better than the Bose Triports I used for my iPod, plus they have the mic and button for recieving calls and ipod playback. I also have the airdrives, which don't even compare for sound quality and range because they aren't in-ear (they sit directly in front of the ear canal). I still use the airdrives in situations where I want music distraction but still want to hear what's happening around me, but for in-ear sound quality and iPhone functionality I don't think you're going to find better for the Sennheisers for under $100. In fact I don't think their is anything under $250 right now that would match it for performance, comfort and functionality.
Note: these are asymmetrical which means the cord for the right earbud goes behind your neck to the right ear. I found this strange at first but now I actually like it because it allows you to pull the earlplugs out and just let them rest over your neck/shoulders.
Message was edited by: slyderulz
Message was edited by: slyderulz

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

As far as I know, Apple sells no such configuration. However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
Hope that helps.

Earbuds with Mic and Skip Functions not working after IOS 6.0.1 update?

I have earbuds with a mic and skip buttons functions and noticed that mic and the skip music functions stop working after updating to IOS 6.0.1. Now when I talk on the phone the mic on iPhone itself is working and not the mic on my earbuds. Also when playing music he skip functions has stop working. Has anyone noticed these problems?

Phone restart > if that doesn't work then do a reset of the settings. Full restore would be the last option.

Can i use wireless earbuds with my ipod nano 6th. if yes how do i do it ?

can i use wireless earbuds with my iPod nano 6th generation ? If yes, tell me how to do it. Thank you

You will need this: http://www.amazon.com/KOKKIA-MULTI-STREAM-multi-stream-authentication-Capabiliti es/dp/B004I408OW/ref=sr_1_1?ie=UTF8&qid=1405309396&sr=8-1&keywords=bluetooth+ipo d+adaptor

Please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4.

please can someone help me out. I initial configure my bluetooth stereo ear piece with my iphone 4 and it was working but I mistakenly forget the bluetooth device and I cannot reconfigure it again with my iphone 4?

place the device in pairing mode and re-pair.
If you don't know how to do this, go to the manufacturer's website and download the user guide for your device.

Is there an adapter that lets you use iPhone earbuds with an iMac?

I have big heavy uncomfortable headphones with a mic that I use for gaming on my iMac.
I'd rather use the earbuds from my iPhone.
Is there an adapter that lets you use iPhone earbuds with an iMac?

I got the splitter, (see link below), but the mic does not seem to work. Apparently, there's a difference between a mic port and a line-in port. Mic ports are powered by the computer, line-in ports are not. They expect a powered signal to come from the input device. The iMac has a line-in port.
I downloaded an app called Line-in that is supposed to give back the ability to use unpowered mics with Macs that lost the abiliy after a system update. It did not work for me. I guess my iMac never had the ability to use unpowered mics.
So I ordered the USB Stereo Audio Adapter below. It's basically a sound card that plugs into a USB port and will work with an unpowered mic. It has not arrived yet. I'll let you know how it goes.
GTMax Headset Adapter: Smartphone Headset to PC Adapter - Use a 3.5mm iPhone/Smartphone Headset With Your PC, Converts 3.5mm Plug to Dual Mic/Audio 3.5mm, for Skype/VOIP
http://www.amazon.com/gp/product/B0046FMRGA/ref=oh_details_o01_s00_i00
Syba SD-CM-UAUD USB Stereo Audio Adapter, C-Media Chipset, RoHS
http://www.amazon.com/gp/product/B001MSS6CS/ref=oh_details_o00_s00_i00

Noise using earbuds with Pixi

I'm trying to figure out if there is a problem with my Pixi or if this is normal behaviour:
     I have had my Pixi for about a month and recently I've started using it as a video and music device. The problem is, when I use earbuds with my Pixi, there is a lot of noise coming through them.   I can hear the headphone jack turn on because it goes from completely silent to very noisey. If I turn the volume all the way down while I'm listening to music, I can still here the noise and when I put the volume at 'one' there is even more background noise accompanying my music.
     The noise does not keep getting louder as I turn the volume higher and higher. Eventually it is drowned out by the music. But I like to listen to my music very quietly since I work in a quiet environment, and I would like to be able to keep it on 'one' or 'two.'
     I've tried three different headsets and they all have this background noise coming through, but I don't know if every pixi has this problem with music at low volumes or if mine needs to be repaired. I would love to hear comments, experience, and advice about what to do to solve this problem.
Thanks.
Post relates to: Pixi p120eww (Sprint)

Nope, not just you. I've now heard it on two Pixis--second was a replacement from Amazon that apparently didn't solve my problem with echoing on the phone.

Is the iPod Touch 2nd Gen compatible with current iPhone earbuds with mic?

I have a friend that wants to talk to me on Skype with an iPod touch 2nd gen, but the earbuds don't have a microphone to talk into.
Is the iPhone earbuds with mic compatible with the Touch Gen 2? Thanks.

I found an Apple brand iPhone stereo headset (with mic) on eBay, but when I try it with my iPod Touch 2G on apps like Skype or QuickVoice, I get a message saying that there is no microphone attached. Has anyone else encountered this problem?

Change manifest file in existing EAR file with ANT task

Hi,
I use ant task (ojdeploy) to create EAR files from ADF application.
Now I want to add the application version number to MANIFEST.MF.
Is it possible to do the manifest file modification IN THE EXISTING EAR FILE (or while creating the EAR file with ojdeploy) with ant task or do I have to do the modification in the source MANIFEST.MF and after this create EAR file with ojdeploy?
BTW: I tried the <ear> task to create the EAR file instead of using ojdeploy but I was not able to find the needed deployment descriptor (appxml="application.xml") in my ADF appication.
regards
Peter

Hi Peter,
I don't know of a way to do it directly in ANT/ojdeploy. However, you could try exploding the EAR, updating the manifest, and recreating the EAR - cumbersome and slow, but it should work.
John

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect; status bar looks good. But audio always comes out the speaker. Thx.

Should my iPhone 1 (iOS 3.1.3) with Bluetooth 2.0 (Handset HSP?) work with wireless earbuds with BT 4.0 and the Headset (and Handsfree, A2DP, AVRCP) protocol? They pair and connect as expected (with a PIN); status bar looks good and shows Bluetooth active, and I even see the iPhone displays the battery levels of the wireless earbuds. But audio always comes out the speaker. (If I plug in wired headphones into the headphone jack then audio comes into the wired headphones, as expected.) I have rebooted the iPhone; I have had it forget about the wireless earbuds, and repaired and reconnected; I have reset all network settings. Thx in advance.
PS: I understand that more recent versions of iOS have a way to choose where audio output goes (speaker, headphone jack, Bluetooth device). Does this older version of iOS? I could not find an option or setting.

I've noticed this lately as well, with my iPhone 4. I couldn't confidently pin it directly on any particular iOS update, but my iPhone used to automatically connect up via Bluetooth with my Prius's handsfree feature, and now it doesn't. I work with a CE-based device at my job, with Bluetooth capability, and I used to test out that feature by having it discover my iPhone. This no longer works either.
What I have found (not really a solution, but it does work and may be a clue for Apple) is that if I simply go to the Settings app then the General -> Bluetooth screen and let it sit there, it will pair right up with my car within a few seconds. Bluetooth is always on, and always says "Now Discoverable" at the bottom of the settings screen.

Using the earbuds with clicker I'm not able to advance my music

using the earbuds with clicker I'm not able to advance my music

The Compatibility section here shows it's only compatible with the 6th generation iPod classic (2009): http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic

Is it possible to see a film on appletv trough iPod and ear sound with ear sounds with headphone of iPod?

Is it possible to see a film on appletv trough iPod and ear sound with headphone of iPod?

No

Is there any possibilty to integrate a EAR file with cq5 project??? the ear file is generated from a

Is there any possibilty to integrate a EAR file with cq5 project??? the ear file is generated from a WSDL..

Is there a reason why you need an "ear" file ? So what is the task you want to fullfill.
For me it sounds like you want to integrate a jax-ws service inside a cq5 project. To achive that you have to integrate a jax-rs client in cq5.
One option to achive that is to integrate Apache CXF like documented here:
http://www.pro-vision.de/adaptto/downloads/110915_adaptto_sling_cxf.pdf
Samplecode can be found here:
http://www.pro-vision.de/adaptto/downloads/110915_adaptto_sling_cxf_sampleproject.zip
Best regards,
Dominik

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

Has anyone found any glow-in-the-dark earbuds (with mic) for the iPhone? I'm looking for some that glow or light up so they can be seen when I walk in the dark.

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

In ear earbuds with remtoe

Similar Messages

Maybe you are looking for