In edit mode, can't select specific options in combo box
I need to edit options in a combox box. When I click on the option I want to edit, it's actually reflected in the combo box, but the option I selected doesn't stay highlighted for editing. The highlight jumps to a different option. This is consistent, but not all options jump. I can't edit many of the options. Using Acrobat 9 Pro.
Any suggestions?
try67 says..."It's not necessary to use Acrobat 5 to edit form fields. Acrobat 9 can do it just fine."
For the most part, A5 and A9 field editing process is the same. Editing the combox box properties is EXACTLY the same. Open the combo box field properties, select the options tab. Click on the option you want to change. The text shows up in the upper window. Edit the text. Save the edited option. It goes to the bottom, Then run it up to where it goes in the list and delete the prior option. In Acrobat 9 (on two machines in our office) the item you click on does not stay selected. The job at hand has a list of 33 options, some stay selected, some do not and are impossible to select...even to delete.
In Acrobat 5, this same process works perfectly.
I'm quite sure that anyone serious (aka trying to make money) about Acrobat production keeps a copy of A5 on hand. Try setting tab order in V9 on a 900 field form that requires a mix of column and row ordering. Then go to the window at the left and pick a field and try to run it up to where it goes. The window doesn't even scroll. You have to set your field down, scroll the window and pick it up and go another jag. And then, scroll back down and try to find your place to pick up the next field. In A5, you simply click the fields on the form in the order you want them. 10 minutes vs. 2 hours.
This is not "just fine".
Similar Messages
-
I am doing a book. Can I select the option of 13 photos on a page, put only one photo in the middle box and expect the rest of the page to be printed with only white aroind that photo in the middle?
No
All photos frames must contain photos or you can not order the book
LN -
How do I set up a rating scale so that respondents can only select each option one time?
How do I set up a rating scale so that respondents can only select each option one time?
hi there,
in the LV VI, function & how-to help open the item
Building the front panel -> Front panels controls and indicators -> Array & Cluster controls and indicators -> Arrays -> Tabbing through Elements of an Array or Cluster
or see attachment
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
TabbingThroughArrays_Help.jpg 96 KB -
My keyboard is locked with an update message and I can't select either option....how can I get going again?
1. Hold the Sleep and Home button down together
2. For about 10 seconds
3. Until you see the Apple logo
4. Ignore the red slider -
How to get the current selected value of a combo box or a option button?
Hello All,
I want to catch the current selected value of a combo box and also of a option button and want save it into different variables in my code. These option button and combo box are in a SAP business one form which I have created through VB dot.net coding.
But I don't know how to do that, can any one send any example code for this.
Regards,
Sudeshna.Hi Sudesha,
If you want to get the selected values you can do it as follows: The Combo Box value you can get from the combo box. If you want to get it on the change event, you must make sure that you check when BeforeAction = False. If you want to get an Option Button value you should check the value in the data source attached to the option button.
Dim oForm As SAPbouiCOM.Form
Dim oCombo As SAPbouiCOM.ComboBox
Dim oData As SAPbouiCOM.UserDataSource
oForm = oApplication.Forms.Item("MyForm")
oCombo = oForm.Items.Item("myComboUID")
oApplication.MessageBox(oCombo.Selected.Value)
oData = oForm.DataSources.UserDataSources.Item("MyDataSourceName")
oApplication.MessageBox(oData.ValueEx)
Hope it helps,
Adele -
How to select an item in combo box...!
How to select an item in combo box in order to appear in a box of text (programmed in VB.Net for SAP Business One).
Hi Carlos,
I am not sure if this is what you want, but here's an example of selecting a value in a combo box. This is the item master data window and I'm changing Item Type to Labor.
Dim oCombo As SAPbouiCOM.ComboBox
Dim oForm As SAPbouiCOM.Form
oForm = oApplication.Forms.ActiveForm
oCombo = oForm.Items.Item("214").Specific
oCombo.Select("L", SAPbouiCOM.BoSearchKey.psk_ByValue)
Hope it helps,
Adele -
Some scenes washed out/can't select specific clips to edit?
Basically, some parts of the video look like this:
I found out how to lower the brightness. It's not a perfect fix, but it works for me since I'm not using it for anything special. The problem is, when I don't know how to edit one or two particular clips without changing the rest of the video. Unless, someone has a better idea on how to fix this lighting problem.
IMOVIE '11 9.0.4Am I missing something simple?
It's simple, but not at all obvious:
If you have Show Track Keyframes or Show Track Volume selected, you can't select or move your audio (unless you grab the video portion). The rationale is that, while adjusting clip keyframes/volume is relative to sequence time, adjusting track keyframes/volume is absolute to sequence time. This is a "save me from myself" kind of thing, where the assumption is that you're only adjusting track volume once your clips are in their final time positions in the sequence. By not being able to select the audio while you're adjusting track volume, you're prevented from accidentally moving your audio around whilst adjusting levels/keyframes. It does make sense, but it's not at all obvious what the solution is when you don't even know what the problem is!
Hope that helps... -
How can I select 2 options in Interactive reports
Hi Friends
I have a doubt about Interactive reports/ ALV interactive reports. Is there any option to select multiple selections in interactive reports. If I am displaying in a screen CustNo, Name, Country.
I want to see order details of that customer in another screen using AT Line-Selection. Can I select multiple customer nos at a time and also can I see those order details whom I selected over in first list.
Please send me reply ASAP if there is any option with suitable example.
Thanks
Praveen.Check out this sample. It uses two ALV grids. On the first one you can do multiple selection, hit the continue buttons and it will throw another ALV with those material/plant records. Implement the following program. Create screen 100 and 200. One each screen create a custom container called ALV_CONTAINER(screen 100) and ALV_CONTAINER2(screen 200). Create the gui status for both. Don't forget to create a "CONTINUE" button on the gui-status 100.
report zrich_0006.
tables: mara.
type-pools: slis, icon.
* Internal Tables
data: begin of ialv occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of ialv .
data: begin of ialv2 occurs 0,
matnr type mara-matnr,
werks type marc-werks,
end of ialv2.
* Miscellanous Variables
data: index_rows type lvc_t_row,
index like line of index_rows.
data: alv_container type ref to cl_gui_custom_container,
alv_container2 type ref to cl_gui_custom_container,
alv_grid type ref to cl_gui_alv_grid,
alv_grid2 type ref to cl_gui_alv_grid,
row_table type lvc_t_row with header line,
ok_code like sy-ucomm,
layout type lvc_s_layo,
fieldcat type lvc_t_fcat,
fieldcat2 type lvc_t_fcat.
select-options: s_matnr for mara-matnr.
start-of-selection.
select mara~matnr makt~maktx
into corresponding fields of table ialv
from mara
inner join makt
on mara~matnr = makt~matnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
sort ialv ascending by matnr.
call screen 100.
* Module status_0100 OUTPUT
module status_0100 output.
set pf-status '0100'.
set titlebar '0100'.
data: lt_exclude type ui_functions.
* Create Controls
create object alv_container
exporting container_name = 'ALV_CONTAINER'.
create object alv_grid
exporting i_parent = alv_container.
* Populate Field Catalog
perform get_fieldcatalog.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
perform exclude_tb_functions changing lt_exclude.
* Set selection mode to "D" -- Multiple Lines
layout-sel_mode = 'D'.
call method alv_grid->set_table_for_first_display
exporting
is_layout = layout
it_toolbar_excluding = lt_exclude
i_structure_name = 'IALV'
changing
it_outtab = ialv[]
it_fieldcatalog = fieldcat[].
endmodule.
* Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
when 'BACK' or 'CANC'.
perform free_containers.
if sy-subrc = 0.
set screen 0.
leave screen.
else.
leave program.
endif.
when 'EXIT'.
perform free_containers.
leave program.
when 'CONTINUE'.
* Retrieve selected rows from ALV grid
clear index_rows. refresh index_rows.
call method alv_grid->get_selected_rows
importing
et_index_rows = index_rows.
* Do something with those selected rows here
loop at index_rows into index.
read table ialv index index-index.
if sy-subrc = 0.
select * appending corresponding fields of table ialv2
from marc
where matnr = ialv-matnr.
endif.
endloop.
perform free_containers.
leave to screen 200.
endcase.
endmodule.
* Form FREE_CONTAINERS
form free_containers.
if not alv_container is initial.
call method alv_container->free.
clear: alv_container.
free : alv_container.
endif.
if not alv_container2 is initial.
call method alv_container2->free.
clear: alv_container2.
free : alv_container2.
endif.
endform.
* Form Get_Fieldcatalog - Set Up Columns/Headers
form get_fieldcatalog.
data: ls_fcat type lvc_s_fcat.
data: columnno(3) type n value '0'.
refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 1.
append ls_fcat to fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'Material Description'.
ls_fcat-coltext = 'Material Description'.
ls_fcat-fieldname = 'MATKX'.
ls_fcat-ref_table = 'IALV'.
ls_fcat-outputlen = '40'.
ls_fcat-col_pos = 2.
append ls_fcat to fieldcat.
endform.
* Form Get_Fieldcatalog2 - Set Up Columns/Headers
form get_fieldcatalog2.
data: ls_fcat type lvc_s_fcat.
data: columnno(3) type n value '0'.
refresh: fieldcat2.
clear: ls_fcat.
ls_fcat-reptext = 'Material Number'.
ls_fcat-coltext = 'Material Number'.
ls_fcat-fieldname = 'MATNR'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '18'.
ls_fcat-col_pos = 1.
append ls_fcat to fieldcat2.
clear: ls_fcat.
ls_fcat-reptext = 'Plant'.
ls_fcat-coltext = 'Plant'.
ls_fcat-fieldname = 'WERKS'.
ls_fcat-ref_table = 'IALV2'.
ls_fcat-outputlen = '4'.
ls_fcat-col_pos = 2.
append ls_fcat to fieldcat2.
endform.
* Form EXCLUDE_TB_FUNCTIONS
form exclude_tb_functions changing pt_exclude type ui_functions.
* Only allow to change data not to create new entries (exclude
* generic functions).
data ls_exclude type ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_copy_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_delete_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_append_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_insert_row.
append ls_exclude to pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_loc_move_row.
append ls_exclude to pt_exclude.
endform.
* Module status_0200 OUTPUT
module status_0200 output.
set pf-status '0200'.
set titlebar '0200'.
* Create Controls
create object alv_container2
exporting container_name = 'ALV_CONTAINER2'.
create object alv_grid2
exporting i_parent = alv_container2.
* Populate Field Catalog
perform get_fieldcatalog2.
call method alv_grid2->set_table_for_first_display
changing
it_outtab = ialv2[]
it_fieldcatalog = fieldcat2[].
endmodule.
* Module USER_COMMAND_0200 INPUT
module user_command_0200 input.
case sy-ucomm.
when 'BACK' or 'CANC'.
perform free_containers.
if sy-subrc = 0.
set screen 0.
leave screen.
else.
leave program.
endif.
when 'EXIT'.
perform free_containers.
leave program.
endcase.
endmodule.
Regards,
Rich Heilman -
ALV in EDIT-Mode: can't hide the toolbar in edit-mode
Hi,
I have supressed in my ALV all standard-buttons with the help of an it_toolbar_excluding. I have built my own toolbar (p_object->mt_toolbar). Until know everything is fine, the ALV shows only my own generated toolbar.
In that moment, when I change a property of a column in the fieldcatalog ( wa_catalog-edit = 'X' ), both toolbars are shown, the standard toolbar and my own generated buttons.
What's wrong, how can I hide the standard toolbar when I am in the edit mode?
Kind regards
Andreas
Edited by: Andreas Waldt on Sep 3, 2008 5:19 PMThank you very much,
during testing I have recognized, that the buttons in the toolbar are new functions, because of the edit mode.
So I have put all the new button into the excluding list. It worked!
Thanks again!
Andreas -
New owner here. I see that in printing I can select one page and print same. How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time. Thanks much
Just change the range as illustrated below. If you don't see that, click the Show Details button.
-
Can't select text or expand text box
Hi, everyone.
I have a Page Layout document that exhibiting some odd behavior under Pages 3.0.2.
Everything is ungrouped and unlocked. "Make master objects selectable" is on, although I don't think I made any of the objects master objects.
I can't select a text box using the mouse. The only way to get at the text is to perform a find. When the text is selected via the find I then have a cursor and can manipulate the text.
Also, the plus sign handle isn't responding to the mouse, so I can't expand the box. Very frustrating.
This seems very much like a bug, yes?
-AndréHi, Jerrold.
I thought of that, too, but choosing Select All selects every object except the one giving me the trouble. Also, there seems to be no evidence of another object over laying.
Ok, I just tried something slightly different that did the trick.
When the cursor is on the background, choosing Select All does nothing (yep, nothing, even though I can type). If I purposefully select an object, THEN choose Select All, all the objects get selected, except for the "problem" one.
But I noticed a menu item called "Make Background Objects Selectable." Choosing that gave the "problem" object handles and I am now able to edit it.
It seems that Select All wasn't doing what I expected, and that was the broken link in the chain.
Thank you!!
(And a public thank you to Dennis, too. Who correctly diagnosed the problem and sent back a working file. Awesome community.) -
How can I create a multi-line combo box?
I am using Adobe Acrobat Pro 9 and I am trying to create a multi-line combo box on my fillable form. At the bottom of this form/letter I would like to have a several paragraps that the user can choose from, but it's only allowing me to enter one line at a time. Any help??
Hi, Did you find the answer to this? I'm looking to create a combo box with multi-lines
-
How can I set the size of combo boxes on a toolbar
Hi, I am trying to use setMinimumSize of a combo box on a toolbar, It doesn't seem work. The code as following? Can anyone tell me how I can do it ?
JComboBox sw = New ComboBox();
sw.setMinimumSize(new Dimension(10,10));
Thank you.
Scottuse the method preferred size of the JComponent superclass of the combos:
setPreferredSize
public void setPreferredSize(Dimension preferredSize)
Sets the preferred size of the receiving component. If preferredSize is null, the UI will be asked for the preferred size. -
Retime mode: can't select "adaptive"
I'm trying to create slow motion footage in shake.
Imported footage from FCP (50 % speed),
then when I select reTiming > speed > retimeMode ,
my only options are Blend and Nearest, " Adaptive " option is missing,
Can anyone help me with this?
imac g5 Mac OS X (10.4.8)Does your Parameter1 look like this?
http://homepage.mac.com/captmench/Adaptive.png
Or is your file in node selected?
Dbl check these steps
Click FileIn node (footage)
Click Parameters1 tab in the parameters settings window
Click TIMING by the source tab
Change retiming to SPEED
Retime Mode to Adaptive...
Not sure why Adaptive is missing. What version of Shake are you using??
CaptM -
In shuffle all/song mode, can you get specific album tracks to segue?
That is, if I want to shuffle everything in the pod, but want to maintain specific album cut segues is there some setting I can use by right clicking the cut to 'Get Info', then tweak?
I tried checking off 'Remember playback position' and 'Part of a gapless album' under 'Options', but that didn't do the trick.
e.g., I don't necessarily mind ZZ Top's 'Waiting For The Bus' segueing into Bill Evans' 'Green Dolphin Street', but it really SHOULD go right into ZZ's 'Jesus Just Left Chicago'.
Thanks in advance.Beuller?
Maybe you are looking for
-
Hi. I have purchased Lego Indiana Jones for my Macbook Pro. On trying to install it, it is telling me it encountering an error. Does anyone know how I can get around this? Cheers
-
How to create an APEX 4.1 session?
Hi, I've successfully used the mechanism described by [this thread|https://forums.oracle.com/forums/thread.jspa?threadID=663227] to create an APEX session in release 3.1. We've recently been forced to move onto Oracle 11g and APEX 4.1. The session ro
-
Form Features: Checking for required fields on scrolling or moving to the next page.
Hi! I am developing a form which will be distributed to people using Adobe Reader without the JavaScript functionality. I have a form with about 20+ pages and each page has 4 required fields. I would like to make it easy for the users to show the err
-
I had to update my iPhone 4 to the new iOS 5 version, so I did. When I plugged my phone into iTunes and let download complete, it said my phone could not be restored and it wasn't eligible for the required build. Why did it do that, and did my phone
-
I am having a problem here and hope someone is able to help me out - I am banging my head against a wall. I am trying to connect my MAC against a LDAP server. The server seems to run fine, and authenticates several linux box. So I assume it's a mac c